Toyota Forklift SP10 SP10S Service Manual SN 904526 – PDF DOWNLOAD
FILE DETAILS:
Toyota Forklift SP10 SP10S Service Manual SN 904526 – PDF DOWNLOAD
Language : English
Pages : 118
Downloadable : Yes
File Type : PDF
DESCRIPTION:
Toyota Forklift SP10 SP10S Service Manual SN 904526 – PDF DOWNLOAD
Maintenance:
All points in the service program should be carried out to attain the highest safety and the least possible downtime. The service intervals are only a guide and do not need to be followed to the letter. The operator may adapt them to local conditions, but it is important that the intervals comply with Toyota’s minimum requirements.
The service intervals are based on the running times and can be adapted to most normal 8 hour shifts. The service interval may be shortened if the truck is used more frequently or in more demanding situations, e.g cold store, dusty or corrosive situations. The following running times have been used when calculating the intervals:
-Day time:08.00-17.00 (20 hr./week)
-2-shifts:06.00-14.00, 14.00-22.00 (40 hr./week)
-3-shifts:06.00-14.00, 14.00-22.00,22.00-06.00
(60 hr./week)
Ensure the truck is given a regular maintenance service after every 500 driving hours. The truck’s safety, efficiency and service life is dependent on the service and maintenance it is given.
Only use Toyota approved spare parts when service and repair work are carried out.
Safety regulations with maintenance work:
Only personnel that have been trained in the service and repair of this type of truck are authorised to carry out service and repair work.
•Do not carry out any maintenance work on the truck unless you have the correct training and knowledge to do so.
•Keep the area where you carry out the service clean. Oil or water makes the floor slippery.
•Never wear loose objects or jewellery when working on the truck.
Short-circuiting/Burns.
When working with the truck’s electrical system, short-circuiting/burns can occur if a metal object comes into contact with live electrical connections.
Remove watches, rings or other types of metal jewellery.
•Always disconnect the battery by pulling out the battery isolator when carrying out maintenance work on the truck unless otherwise stated in this Service Manual.
•Always switch off the truck’s power supply before opening the covers on the drive unit or electrical system.
•Relieve the system pressure slowly before starting work on the truck’s hydraulic system.
TABLE OF CONTENTS:
Toyota Forklift SP10 SP10S Service Manual SN 904526 – PDF DOWNLOAD
1- Table of contents.......................................... 3 2- Technical data............................................. 7 2.1 General tightening torques............................ 10 3- Maintenance................................................ 11 3.1 Safety regulations with maintenance work.............. 11 3.2 Cleaning and washing.................................. 13 3.2.1 External cleaning............................... 13 3.2.2 Cleaning the motor compartment.................. 13 3.2.3 Electrical components........................... 13 3.3 Safe lifting.......................................... 14 3.4 Lifting the truck..................................... 15 3.5 Placing the truck on its side......................... 16 3.6 Maintenance Schedule.................................. 17 3.7 Lubrication chart..................................... 21 4- Oil and grease specification............................... 23 5- Tools...................................................... 25 5.1 Super Seal connectors................................. 25 5.2 AMP connectors........................................ 26 5.2.1 AMP Connectors, 040 series...................... 27 5.3 Molex connectors...................................... 27 5.4 Grease guns........................................... 28 5.5 Other tools........................................... 29 6- Chassis - 0000............................................. 31 6.1 Support arms SP10..................................... 31 6.1.1 Placement of supportarms........................ 32 6.2 Support arms SP10S.................................... 33 6.2.1 General......................................... 33 6.2.2 Main Components................................. 33 6.2.3 Maintenance..................................... 34 6.2.4 Adjusting the support arm width................. 34 6.2.5 Replacing support arms.......................... 35 7- Drive unit/drive gear - 2000............................... 37 7.1 Component parts....................................... 37 7.2 Service and repairs................................... 38 7.2.1 Dismantling the motor from the truck............ 38 7.2.2 Inspection/replacement of the carbon brushes.... 38 7.2.3 Replacing the drive gear........................ 39 7.2.4 Cleaning........................................ 39 7.2.5 Brakes, Maintenance............................. 40 7.2.6 Replacing the brake disc........................ 40 8- Wheel system - 3000........................................ 41 8.1 Swivel wheel suspension............................... 41 8.1.1 Components...................................... 41 8.1.2 Lubricating the nipples......................... 41 8.1.3 Adjusting the swivel wheel pressure............. 42 9- Steering system - 4000..................................... 43 9.1 Components............................................ 43 10- Electrical system - 5000.................................. 45 10.1 General.............................................. 45 10.1.1 Firmware (truck control software).............. 45 10.2 Nomenclature......................................... 45 10.3 Electrical equipment overview........................ 46 10.3.1 Electric component overview.................... 48 10.4 Accessing main electrical panel...................... 50 10.5 Electrical circuit overview.......................... 51 10.6 Symbol list.......................................... 52 10.7 Electrical wiring diagram............................ 53 10.8 Functional description............................... 58 10.8.1 Theory of operation............................ 58 10.8.2 Transistor regulator........................... 62 General........................................... 62 Safety............................................ 62 10.8.3 On-board battery charger....................... 64 General........................................... 64 Charging.......................................... 64 10.8.4 Battery charge status.......................... 65 Battery display (option).......................... 65 10.8.5 Speed limitation............................... 66 10.8.6 Hour meter..................................... 66 10.8.7 Hand terminal.................................. 67 General........................................... 67 Connecting the hand terminal...................... 67 Hand terminal overview............................ 67 Hand terminal menus............................... 69 10.9 Diagnostic and troubleshooting....................... 70 10.9.1 General........................................ 70 10.9.2 Display of error codes......................... 70 Direct display of error codes..................... 70 Hand terminal display of error codes.............. 70 Error code history................................ 71 10.9.3 List of error codes............................ 72 10.9.4 TESTER function................................ 75 10.10 Parameters & adjustments............................ 77 10.10.1 General....................................... 77 10.10.2 Adjusting parameters.......................... 77 10.10.3 List of parameters............................ 78 10.10.4 Description of parameters..................... 79 Acceleration ramp time (ACC.DELAY)................ 79 Deceleration ramp time (DECELER.DELAY)............ 79 Neutral braking intensity (RELEASE BRAKING)....... 79 Reverse braking intensity (INVERSION BRAKING)..... 79 Maximum travel speed (CUTBACK SPEED 3)............ 79 Reset service counter (CHECK UP DONE)............. 79 Select service warning type (CHECK UP TYPE)....... 79 “Time to next service” (CHECK UP HOURS)........... 80 10.10.5 Transferring parameter sets................... 80 General........................................... 80 From the truck to the hand terminal............... 81 From the hand terminal to the truck............... 82 10.10.6 Calibrating the speed potentiometer........... 82 General........................................... 82 Procedure......................................... 83 10.11 Technical specifications............................ 84 10.11.1 Transistor regulator SEM-X.................... 84 11- Hydraulic system - 6000................................... 85 11.1 General.............................................. 85 11.2 Hydraulics diagram and components.................... 86 11.3 Description.......................................... 88 Lift.................................................. 88 Lower................................................. 88 Operating pressure.................................... 88 Pressure limit valve.................................. 88 11.4 Adjustments.......................................... 89 Adjustment of the pressure limit valve................ 89 11.5 Tools................................................ 90 12- Lift mast - 7000.......................................... 91 12.1 Main mast............................................ 91 12.1.1 Components..................................... 91 12.1.2 Maintenance.................................... 92 Mounting.......................................... 92 Lubrication....................................... 92 12.1.3 Cylinder....................................... 93 Disassembly....................................... 93 Assembly.......................................... 93 12.2 Fork carriage........................................ 94 12.2.1 Maintenance.................................... 94 12.3 Main lift chain system............................... 95 12.3.1 Checking the chain setting..................... 95 12.3.2 Chain inspection............................... 95 Noise............................................. 95 Surface rust...................................... 95 Rusty links....................................... 95 Stiff links....................................... 95 Bolt rotation..................................... 96 Loose bolts....................................... 96 Outline wear...................................... 96 Stretching........................................ 97 Damage............................................ 98 Damaged discs..................................... 98 Damaged bolts..................................... 98 Dirty chain....................................... 98 12.3.3 Cleaning....................................... 98 12.3.4 Lubrication.................................... 99 13- Accessories - 9000........................................101 13.1 Automatic height adjustment..........................101 13.1.1 General........................................101 13.1.2 Electrical wiring diagram......................103 14- Destruction instructions..................................109 14.1 General..............................................109 14.2 Procedure............................................109 14.3 Abbreviations........................................110 14.4 Sorting..............................................110 14.5 Chassis (0300).......................................111 Disassembly...........................................111 Material handling.....................................111 14.6 Hoods, hatches (0340)................................111 Disassembly...........................................111 Material handling.....................................111 14.7 Electric Pump Motor (1710)...........................111 Disassembly...........................................111 Material handling.....................................111 14.8 Drive assembly/drive motor (1760/ 2550)..............112 Disassembly...........................................112 Material handling.....................................112 14.9 Wheels (3500)........................................113 Disassembly...........................................113 Material handling.....................................113 14.10 Tiller arm (4110)...................................113 Disassembly...........................................113 Material handling.....................................113 14.11 General electrical equipment (5100).................114 Disassembly...........................................114 Material handling.....................................114 14.12 Hydraulic unit (6100)...............................115 Disassembly...........................................115 Material handling.....................................115 14.13 Hydraulic cables/cylinders (6230/ 6610).............116 Disassembly...........................................116 Material handling.....................................116 14.14 Main mast and fork carriage (7100)..................117 Disassembly...........................................117 Material handling.....................................117
IMAGES PREVIEW OF THE MANUAL:
VIDEO PREVIEW OF THE MANUAL:
PLEASE NOTE:
- This is the same manual used by the dealers to diagnose and troubleshoot your vehicle
- You will be directed to the download page as soon as the purchase is completed. The whole payment and downloading process will take anywhere between 2-5 minutes
- Need any other service / repair / parts manual, please feel free to contact [email protected] . We still have 50,000 manuals unlisted
S.V