Massey Ferguson 8400 Series 8450 8460 8470 8480 Tractors Operator Instruction Manual – PDF DOWNLOAD
DESCRIPTION:
Massey Ferguson 8400 Series 8450 8460 8470 8480 Tractors Operator Instruction Manual – PDF DOWNLOAD
INTRODUCTION :
- The Safety chapter in the Operator Instruction Book stresses certain basic safety-related situations which may be encountered during the operation and normal servicing of the tractor and gives the information needed to cope with these situations. This chapter SUPPLEMENTS any safety instructions given in other chapters of this book. It may be necessary to take additional precautions depending on the equipment used and the working conditions on the site or in the servicing area. AGCO can under no circumstances exercise direct control over the commissioning, operation, inspection, lubrication or servicing of the tractor. It is therefore YOUR responsibility to take suitable safety measures in such areas.
- NOTE: This book is published and distributed worldwide and the availability of the equipment indicated, whether on the basic tractor or as accessories, may vary according to the country in which the tractor is used. To find out which equipment is available in a given region, contact an AGCO dealer. The purpose of this book is to allow the owner and the operator to run the tractor safely. Providing they follow the instructions carefully, the tractor will operate for many years in the AGCO tradition.
- Commissioning the equipment at the user’s by the dealer provides the possibility of ensuring that these operating and servicing instructions are properly understood. Always consult the dealer if any part of this book is not understood. It is important for these instructions to be understood and followed. Daily maintenance should become a routine and a log book of operating hours should be kept. When new spare parts are required, it is important to use AGCO original spare parts only. AGCO dealers supply only genuine original parts and can give advice concerning their fitting and use. The use of parts of lower quality may cause serious damage. Customers are advised to only purchase their spare parts from an approved AGCO dealer.
- Due to the considerable differences in operating conditions, it is not possible for the manufacturer to formulate complete or absolute assertions in its publications concerning the performance or operating methods of its machines or accept liability for any loss or damage which may result from such assertions or possible errors or omissions. To prevent the warranty becoming void, you should consult your AGCO dealer to obtain special instructions if the tractor is to be used under abnormal conditions which could be detrimental to it (use in deep water or in paddy fields for instance).
- These tractors are only designed for usual farming purposes (designed use). Any other use is considered as being contrary to the designed use. AGCO declines all liability in cases of physical damage or injuries resulting from improper use the consequences of which shall be borne by the user alone. The conformity and strict adherence to the operating, servicing and repair requirements specified by AGCO are also essential factors for designed use.
- These tractors must only be used, serviced and repaired by personnel having full knowledge of their specific features 8400 EAME and who are aware of the applicable safety rules (prevention of accidents). Customers are strongly recommended to contact an AGCO dealer in the event of after-sale problems and for any adjustments which may be necessary.
Pre-delivery inspection, commissioning at the user’s premises and warranty :
- When selling new products to their dealers, the manufacturer gives a warranty which, subject to certain conditions, guarantees that the goods are free from material and workmanship defects. Since this book is published worldwide, it is impossible to detail the exact terms and conditions of warranty that apply to a retail customer in any particular country. Purchasers of new AGCO equipment should request full details from their supplying Dealer. In accordance with the Corporation’s policy of continuous improvement to its products, alterations in the specifications of machines may be made at any time without notice.
- The Corporation disclaims all liability for discrepancies which may occur between the specifications of its products and the descriptions thereof contained in its publications. A Dealer is required to carry out certain activities when supplying a new AGCO tractor.
- These consist of a full pre-delivery inspection to ensure that the tractor supplied is ready for immediate use, and full instructions to the user in the basic principles of operation and servicing of the tractor. These instructions will cover instruments and controls, and routine servicing and safety precautions. All persons who will be concerned with the operation and servicing of the tractor should be present for these instructions. NOTE: AGCO disclaims al/ liability to any claim resulting from the fitting of non-approved parts, accessories, implements or equipment or unauthorized modification or alteration.
TABLE OF CONTENTS:
Massey Ferguson 8400 Series 8450 8460 8470 8480 Tractors Operator Instruction Manual – PDF DOWNLOAD
Chapter 1
TRACTOR IDENTIFICATION
Chapter 2
INTRODUCTION – SAFETY INSTRUCTIONS AND WARRANTY
Chapter 3
INSTRUMENTS AND CONTROLS
Chapter4
OPERATION
Chapter 5
MAINTENANCE AND ADJUSTMENTS
Chapter6
SPECIFICATIONS
Chapter 7
ACCESSORIES AND OPTIONS
Appendix
CONVERSION TABLES
Index
VIDEO PREVIEW OF THE MANUAL:
IMAGES PREVIEW OF THE MANUAL:
PLEASE NOTE:
- This is the same manual used by the dealers to diagnose and troubleshoot your vehicle
- You will be directed to the download page as soon as the purchase is completed. The whole payment and downloading process will take anywhere between 2-5 minutes
- Need any other service / repair / parts manual, please feel free to contact [email protected] . We still have 50,000 manuals unlisted
S.V