Liebherr Wood grapple GMH 180 Operator’s manual – PDF DOWNLOAD
FILE DETAILS:
Liebherr Wood grapple GMH 180 Operator’s manual – PDF DOWNLOAD
Language : English
Pages :72
Downloadable : Yes
File Type : PDF
Size:14.3 MB
DESCRIPTION:
Liebherr Wood grapple GMH 180 Operator’s manual – PDF DOWNLOAD
Product ID
Manufacturer:
Product type:Liebherr-Hydraulikbagger GmbH
Wood grapple
GMH 180
Preface
This operating manual is intended for you as the machine operator or as a member of the maintenance personnel. It contains warnings, important information, and tips for working with the machine. It simplifies the process of familiarization and getting to know the machine and helps to avoid faults caused by incorrect operation.
- Compliance with the operating manual increases the reliability and service life of the machine.
- The operating manual must be kept with the machine. Make sure that a copy is always kept close at hand in the workplace.
- Read the operating manual before initial commissioning and subsequently at regular intervals. Everyone who carries out work with or on the machine must be familiar with and use this operating manual.
Examples of this work:
- Operation, including setup and fitting attachments, elimination of faults, care, disposal of service products and consumables.
- Maintenance, including servicing, inspection, and repair.
- Transporting or loading the machine.
The owner is responsible for supplementing the operating manual with instructions based on existing national regulations on accident prevention and environmental protection. In addition to this operating manual and the regulations on accident prevention applicable in the user’s country and at the place of use, it is also necessary to comply with recognized technical rules on safety and technically proficient working.
- Some sections of this operating manual do not apply to all machines.
- Some illustrations in this operating manual may show details and implements that are different from your machine.
- In some illustrations, protective devices and covers have been removed to provide a clearer representation.
- Liebherr machines are subject to continuous development and improvement. This may have resulted in modifications to your machine that are possibly not referred to in this operating manual.
- If you require further explanations or information, please contact Liebherr customer service.
Liability and warranty
- Due to the wide variety of products offered by other manufacturers (e.g., service products, lubricants, tool attachments, and spare parts), Liebherr cannot examine the general suitability and absence of defects in third-party products used in or on Liebherr products. The same applies to possible interactions between third-party products and Liebherr products.
- Third-party products are used in or on Liebherr machines at the user’s own discretion. Liebherr does not offer any warranty or accept any liability for losses of any kind caused by failures of or damage to Liebherr machines attributable to the use of third-party products.
- Furthermore, Liebherr will not recognize any warranty claims attributable to incorrect operation, inadequate maintenance, or the failure to follow safety instructions.
Modifications, conditions, copyright
- Liebherr reserves the right to make modifications in the course of technical development without issuing prior notification.
- Information and illustrations in these instructions are not allowed to be duplicated, distributed, or used for the purposes of competing with Liebherr. All rights under copyright legislation are expressly reserved.
- The aforementioned provisions do not extend the warranty and liability conditions in the general terms and conditions of business of Liebherr.
TABLE OF CONTENTS:
Liebherr Wood grapple GMH 180 Operator’s manual – PDF DOWNLOAD
1 Product description 11
1.1 Technical description 11
1.1.1 Wood grapple 11
1.2 Technical data 12
1.2.1 Specifications 12
2 Safety warnings 13
2.1 Information on these instructions 13
2.1.1 Representation of warning messages 13
2.1.2 Graphic symbols in these instructions 13
2.2 Intended use 14
2.2.1 Laws, rules, guidelines and safety regulations 14
2.2.2 Intended use 14
2.2.3 Foreseeable misuse 15
2.2.4 Operating conditions 15
2.2.5 Disposal 16
2.3 Description of staff 16
2.3.1 Personal protective equipment 16
2.3.2 Requirements for staff 17
2.3.3 Operating company 17
2.3.4 Operator 18
2.3.5 Maintenance staff 19
2.4.2 Identification plate 22
2.5 Safe operation 23
copyright© Liebherr-Hydraulikbagger GmbH 2018
Wood grapple llEBHERR 7
Contents Operator’s manual
2.5.1 Intoxicants 23
2.5.2 Dangerous fuels and operating fluids 23
2.5.3 Transporting working tool 23
2.5.4 Machine danger zone 24
2.5.5 Operating working tool 24
2.5.6 Load-lifting work 26
2.6 Safe maintenance 26
2.6.1 Spare parts 26
2.6.2 Heavy parts 26
2.6.3 Regular checks 27
2.7 Modifications to the machine 27
2.7.1 Modifications, add-ons and retrofittings 27
3 Control and operation 29
3.1 Fitting and removing working tool 29
3.1.1 Installing wood grapple 29
3.1.2 Removing wood grapple 31
3.1.3 Retrofitting hold-down chain (option) 31
3.1.4 Installing and removing working tool with quick coupler suspension for
direct installation 32
3.1.5 Adjusting swing brake 43
3.1.6 Checking swing brake for wear 45
3.2 Operation 46
3.2.1 Before putting into service 46
3.2.2 Operating wood grapple 47
3.3 General working methods 48
3.3.1 Tool-protecting working 48
3.3.2 Handling loads 48
3.3.3 Working with the wood grapple 49 C:
3.4.1 Transporting working tool 54
copyright© Liebherr-Hydraulikbagger GmbH 2018
8 llEBHERR Wood grapple
Operator’s manual Contents
4 Maintenance 55
4.1 Inspection and maintenance schedule 55
4.2 Fuels, lubricants and operating fluids 57
4.2.1 Hydraulic oil 57
4.2.2 Greases 57
4.3 General maintenance 58
4.3.1 Depressurising hydraulic lines 58
4.4 Working attachment 59
4.4.1 Lubricating wood grapple 59
4.4.2 Cleaning working tool 59
4.4.3 Passfix bearing (option) 60
4.4.4 Checking pin connections for secure seating 63
4.4.5 Checking steel parts for cracks 63
4.4.6 Pin bearing: checking for wear 63
4.4.7 Checking and replacing clip-on cutting edges 63
4.4.8 Hydraulic hoses: Checking condition 67
4.4.9 Working attachment: Checking function 67
4.4.10 Rotary actuator: Changing oil 68
4.4.11 Storing working tool 70
Index
IMAGES PREVIEW OF THE MANUAL:
VIDEO PREVIEW OF THE MANUAL:
PLEASE NOTE:
- This is the SAME exact manual used by your dealers to fix your vehicle.
- The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
- Any queries / doubts regarding your purchase, please feel free to contact [email protected]
s.m