Mitsubishi Forklift FD100NM1 FD100NM1S FD120NM1 FD120NM1S FD135NM1 FD135NM1S FD150ANM1 FD150ANM1S Service Manual – PDF DOWNLOAD
FILE DETAILS:
Mitsubishi Forklift FD100NM1 FD100NM1S FD120NM1 FD120NM1S FD135NM1 FD135NM1S FD150ANM1 FD150ANM1S Service Manual – PDF DOWNLOAD
Format: PDF
Language: English
Brand: Mitsubishi
DESCRIPTION:
Mitsubishi Forklift FD100NM1 FD100NM1S FD120NM1 FD120NM1S FD135NM1 FD135NM1S FD150ANM1 FD150ANM1S Chassis & Mast Service Manual – PDF DOWNLOAD
FD100NM1 F15E-90011-99999
FD100NM1S F15E-90011-99999
FD120NM1 F15E-90011-99999
FD120NM1S F15E-90011-99999
FD135NM1 F15E-90011-99999
FD135NM1S F15E-90011-99999
FD150ANM1 F24C-20011-39999
FD150ANM1S F24C-20011-39999
FOREWORD:
- This service manual is a guide for servicing Mitsubishi forklift trucks. The long productive life of your forklift truck(s) depends on regular and proper servicing consistent with what you will learn by reading this service manual. Read the respective sections of this manual carefully and familiarize yourself with all of the components before attempting to start a test, repair, or rebuild the forklift truck.
- The descriptions, illustrations, and specifications contained in this manual are for forklift trucks with serial numbers in effect at the time of printing. Mitsubishi Forklift Trucks reserves the right to change specifications or designs without notice and without incurring obligations. For your convenience the instructions are grouped by systems as an easy reference.
SAFETY:
- The proper safe lubrication and maintenance for these forklift trucks, recommended by Mitsubishi Forklift Trucks, are outlined in the SERVICE MANUAL. Read and understand the SERVICE MANUAL before performing any lubrication or maintenance on these forklift trucks. Improper performance of lubrication or maintenance procedures is dangerous and could result in injury or death.
- The serviceman or mechanic may be unfamiliar with many of the systems on this forklift truck. This makes it important to use caution when performing service work. – DO NOT operate these forklift trucks unless you have read and understood the instructions in the SERVICE MANUAL. Improper forklift truck operation is dangerous and could result in injury or death. A knowledge of the system and/or components is important before the removal or disassembly of any component. Because of the size of some of the forklift truck components, the serviceman or mechanic should check the weights noted in this manual. Use proper lifting procedures when removing any components. The following is a list of basic precautions that should always be observed:
(15) Repairs, which require welding, should be performed only with the appropriate reference information and by personnel adequately trained and knowledgeable in welding procedures. Determine the type of metal and select the correct welding procedure and electrodes, rods, or wire to provide a weld metal strength equivalent at least to that of parent metal.
TABLE OF CONTENTS:
Mitsubishi Forklift FD100NM1 FD100NM1S FD120NM1 FD120NM1S FD135NM1 FD135NM1S FD150ANM1 FD150ANM1S Service Manual – PDF DOWNLOAD
Chapter 1 GENERAL INFORMATION
1 Model View 1-1
2 Applicable Forklift Truck Models 1-1
3 Serial Number Locations1-2
4 Specifications 1-3
41 Dimensions 1-4
42 Performance1-5
Chapter 2 COOLING SYSTEM
1 Specifications 2-1
2 Structure2-2
3 Removing Radiator and Intercooler 2-3
31 Preparation2-3
32 Removal Sequence of Radiator and Intercooler 2-3
33 Suggestions for Removal 2-4
4 Inspecting and Adjusting Radiator and Intercooler 2-5
41 Intercooler 2-5
42 Inspecting Fan Belt2-5
43 Radiator 2-5
44 Antifreeze and Cooling Water 2-6
5 Installing Cooling System2-7
51 Suggestions for Installation 2-7
6 Troubleshooting 2-10
7 Service Data2-11
71 Fan Belt 2-11
72 Radiator 2-11
73 Intercooler 2-12
74 Oil Cooler2-13
Chapter 3 ELECTRICAL SYSTEM
1 Chassis Electrical Components and Wiring Outline 3-1
11 Electrical Components and Wiring Diagram of Each System 3-2
2 Console Box3-12
21 Outline of Console Box 3-12
22 Removing Meter Panel 3-12
23 Installing Meter Panel3-13
3 Main Electrical Components3-14
31 Meter Panel 3-14
32 Select Switch 3-15
33 Brake Warning Icon 3-16
34 Key Switch (Anti-Restart Switch) 3-17
35 Light Switch and Turn Signal Switch 3-18
36 Direction (FNR) Switch 3-20
37 Horn 3-21
TABLE OF CONTENTS
TOC-2
38 Fuel Tank Unit 3-22
39 Stop Light Switch 3-22
310 Thermo Switch (T/C Oil) 3-23
311 Speed Sensor 3-24
312 Fuse Box 3-25
313 Relay Box3-26
314 Glow Relay 3-28
315 Engine Stop Timer 3-28
316 Low Air Pressure Switch 3-29
317 List of Lights3-30
4 Battery and Maintenance3-31
41 Battery Specific Gravity Condition and Adjustment 3-31
42 Relationship Between Electrolyte Specific Gravity and State of Charge 3-32
43 Precautions for Battery Charging 3-32
5 Meter panel 3-33
51 Meter Panel Layout3-33
52 Basic Display3-35
53 Basic Operation3-40
54 When a Warning Occurs 3-48
55 When Several Warnings Occur Simultaneously3-50
56 Warning Symbols 3-51
57 Warning Icons 3-52
58 Optional Features 3-53
59 Hour Meter 3-56
510 Troubleshooting 3-57
6 Wire Color3-58
61 List of Wire Color Codes 3-58
7 Troubleshooting3-59
71 Engine Startup Problem 3-59
72 Gauge-Related Problems3-59
73 Light-Related Problems 3-60
74 Warning Device Problems 3-61
75 Battery-Related Problems3-62
Chapter 4 CONTROLLERS
1 Outline4-1
11 System Configuration4-1
12 Color Coding4-3
13 Controller External View 4-4
2 Service Tool Functions4-12
21 Menu Structure4-12
22 Input Monitor and Output Monitor4-13
23 Truck Status 4-17
24 Truck History4-18
3 Diagnostic Code List 4-19
4 Troubleshooting4-20
41 General Precautions 4-20
42 VCM Memory Check Warning (F01) 4-22
TABLE OF CONTENTS
TOC-3
43 VCM Battery Voltage Warning (F02) 4-23
44 VCM Communication Warning (F03) 4-25
45 Meter Panel Communication Warning (F07)4-27
46 Lift Lever Neutral Warning (F10) 4-28
47 Tilt Lever Neutral Warning (F11) 4-30
48 Attachment 1 Lever Neutral Warning (F12) 4-32
49 Attachment 2 Lever Neutral Warning (F13) 4-34
410 Attachment 3 Lever Neutral Warning (F14) 4-36
411 Direction Lever Warning (F16) 4-38
412 Vehicle Speed Warning (F17) 4-39
413 Lift Lever Warning (F20) 4-40
414 Tilt Lever Warning (F22) 4-42
415 Attachment 1 Lever Warning (F24)4-44
416 Attachment 2 Lever Warning (F26)4-46
417 Attachment 3 Lever Warning (F28)4-48
418 Joystick Duplicate Warning (F29) 4-50
419 Vehicle Speed Sensor Warning (F34) 4-52
420 Output Unit Warning (F41) 4-53
421 Output Unit Supply Voltage Warning (F44) 4-54
422 Output Unit Communication Warning (F45)4-56
423 Input Unit Warning (F46)4-58
424 Input Unit Communication Warning (F49) 4-59
425 Lift up Solenoid Warning (F50) 4-61
426 Lift Down Solenoid Warning (F52)4-63
427 Lift Solenoid Leak (F54) 4-65
428 Tilt Forward Solenoid Warning (F55) 4-68
429 Tilt Backward Solenoid Warning (F57)4-70
430 Tilt Solenoid Leak (F59) 4-72
431 Attachment 1A Solenoid Warning (F60) 4-75
432 Attachment 1B Solenoid Warning (F62) 4-77
433 Attachment 1 Solenoid Leak (F64)4-79
434 Attachment 2A Solenoid Warning (F65) 4-82
435 Attachment 2B Solenoid Warning (F67) 4-84
436 Attachment 2 Solenoid Leak (F69)4-86
437 Attachment 3A Solenoid Warning (F70) 4-89
438 Attachment 3B Solenoid Warning (F72) 4-91
439 Hour Meter Gap Warning (F73)4-93
440 Attachment 3 Solenoid Leak (F74)4-94
441 Unload Solenoid Warning (F75)4-97
442 Unload Solenoid Leak (F79) 4-99
443 Transmission Forward Solenoid Warning (F85)4-101
444 Transmission Reverse Solenoid Warning (F87) 4-103
445 Transmission Solenoid Leak (F89) 4-105
446 VCM Speed Change Solenoid 1 Warning (F93) 4-107
447 VCM Setting Warning (F96) 4-109
Chapter 5 POWER TRAIN
1 Specifications 5-1
2 Structure 5-2
TABLE OF CONTENTS
TOC-4
3 Reduction Ratio 5-3
4 Removing and Installing Engine and Transmission Unit 5-4
41 Preparation 5-4
42 Removing Overhead Guard, Covers, and Air Cleaner Element 5-5
43 Removing Harnesses 5-6
44 Disconnecting Pipes and Hoses5-7
45 Preparation for Removing Engine and Transmission Unit 5-8
46 Removing Engine and Transmission Unit5-9
5 Installing Engine and Transmission Unit 5-10
51 Suggestions for Installation 5-10
52 Capacity and Brand of Oils and Cooling Water 5-12
Chapter 6 3-SPEED POWERSHIFT TRANSMISSION
1 Specifications6-1
2 Structure 6-2
21 Torque Converter 6-2
22 Transmission6-3
23 Power Flow – Forward6-4
24 Power Flow – Reverse 6-5
25 Control Valve6-6
26 Main Regulator Valve 6-6
27 3 Speed Transmission Hydraulic Lines6-7
28 Automatic 3 Speed Shift Mechanism 6-9
29 Torque Converter Drive Control6-10
3 Removing Transmission 6-11
31 Removing Torque Converter6-11
4 Installing Transmission6-12
5 Disassembling Torque Converter 6-13
51 Disassembly Sequence 6-13
52 Suggestions for Disassembly6-13
6 Inspecting and Repairing Torque Converter6-14
7 Assembling Torque Converter 6-17
71 Assembly Sequence 6-17
72 Suggestions for Assembling Torque Converter6-18
8 Disassembling Transmission6-19
81 Disassembly Sequence of Control Valve and External Parts 6-19
82 Disassembling Transmission Cover and Output, 1st/3rd Clutch,
Forward Clutch, Reverse Clutch, and Input Shafts 6-20
83 Suggestions for Disassembling Transmission 6-21
84 Disassembly Sequence of Stator Shaft and Oil Pump 6-23
85 Suggestions for Disassembling Oil Pump6-24
86 Disassembly Sequence of Forward Clutch Shaft Assembly 6-26
87 Suggestions for Disassembling Forward Clutch Shaft Assembly 6-27
88 Disassembly Sequence of 1st/3rd Speed Clutch Shaft Assembly 6-28
89 Suggestions for Disassembling 1st/3rd Clutch Shaft Assembly6-28
810 Disassembly Sequence of Reverse Clutch Shaft Assembly 6-29
811 Suggestions for Disassembling Reverse Clutch Shaft Assembly6-29
TABLE OF CONTENTS
TOC-5
9 Inspecting and Repairing Transmission 6-30
10 Assembling Transmission6-33
101 Assembly Sequence of Forward Clutch Assembly
(1st/3rd Clutch Shaft Assembly) (Reverse Clutch Shaft Assembly)6-33
102 Suggestions for Assembling Forward Clutch Assembly
(1st/3rd Clutch Shaft Assembly) (Reverse Clutch Shaft Assembly)6-34
103 Assembly Sequence of Stator Shaft and Oil Pump6-35
104 Suggestions for Assembling Stator Shaft and Oil Pump 6-36
105 Assembly Sequence of Input Shaft, Forward Clutch, 1st/3rd Speed Clutch,
Reverse Clutch, Output Shafts, and Transmission Cover6-37
106 Suggestions for Assembling Input Shaft, Forward Clutch, 1st/3rd
Speed Clutch, Reverse Clutch, Output Shafts, and Transmission Cover 6-38
107 Assembly Sequence of Control Valve and External Parts6-40
11 Disassembling Control Valve 6-41
111 Disassembly Sequence 6-41
12 Inspecting and Repairing Control Valve 6-42
13 Assembling Control Valve 6-43
131 Preparation 6-43
132 Assembly Sequence 6-43
133 Suggestions for Assembling Control Valve 6-43
14 Disassembling Main Regulator Valve 6-44
141 Disassembly Sequence 6-44
15 Inspecting and Repairing Main Regulator Valve 6-44
16 Assembling Main Regulator Valve6-44
161 Suggestions for Assembly 6-44
17 Adjustment 6-45
171 Adjusting Brake Pedal and Inching Pedal6-45
172 Checking Oil Pressure6-47
173 Measurement 6-50
174 10 m Start Acceleration Test6-50
175 Testing Automatic 3 Speed Transmission Functions 6-51
18 Troubleshooting 6-52
19 Service Data6-57
191 Stall Speed and Oil Pressure6-57
192 Pump Boss 6-57
193 Pilot Boss6-58
194 Oil Pump6-58
195 Stator 6-59
196 Flexible Plate 6-60
197 Clutches 6-61
198 Input Shaft, Forward, Reverse, and 1st/ 3rd Speed Clutch Shafts,
and Servo Case 6-62
199 Backlash of Gears 6-63
1910 Control Valve 6-64
1911 Main Regulator Valve 6-65
1912 Inching Pedal Control6-65
TABLE OF CONTENTS
TOC-6
Chapter 7 FRONT AXLE AND REDUCTION DIFFERENTIAL
1 Specifications7-1
2 Structure 7-2
21 General Description 7-2
22 Reduction Differential7-3
3 Removing Front Wheels 7-4
31 Preparation 7-4
32 Removal Sequence7-4
33 Suggestions for Removal7-5
4 Installing Front Wheels7-8
41 Suggestions for Installation 7-8
5 Removing Front Axle and Reduction Differential 7-9
51 Preparation 7-9
52 Removal Sequence7-10
53 Suggestions for Removal7-11
6 Installing Front Axle and Reduction Differential7-12
61 Suggestions for Installation 7-12
7 Removing Reduction Differential 7-13
71 Preparation 7-13
72 Removal Sequence7-13
73 Suggestions for Removal7-13
8 Installing Reduction Differential7-14
81 Suggestions for Installation 7-14
9 Disassembling Hub Reduction 7-15
91 Preparation (On-Truck Condition) 7-15
92 Disassembly Sequence of Hub Reduction 7-15
93 Suggestions for Disassembling Hub Reduction7-16
94 Disassembly Sequence of Wheel Brake 7-17
95 Suggestions for Disassembling Wheel Brake 7-17
10 Inspecting and Repairing Hub Reduction7-18
101 Assembly Sequence of Wheel Brake 7-20
102 Suggestions for Assembling Wheel Brake 7-20
103 Assembly Sequence of Hub Reduction 7-21
104 Suggestions for Assembling Hub Reduction7-22
11 Disassembling Reduction Differential7-24
111 Preparation 7-24
112 Disassembly Sequence of Differential Gear Assembly7-25
113 Suggestions for Disassembling Differential Gear Assembly 7-25
114 Disassembly Sequence of Reduction and Parking Brake Assembly7-26
115 Suggestions for Disassembling Reduction and Parking Brake Assembly 7-26
116 Inspecting and Repairing Reduction and Parking Brake Assembly7-27
12 Assembling Reduction Differential7-29
121 Assembly Sequence of Differential Gear Assembly7-29
122 Suggestions for Assembling Differential Gear Assembly7-30
123 Adjusting Preload of Reduction Pinion 7-32
124 Adjusting the Contact Between Gear and Pinion Teeth 7-34
125 Assembly Sequence of Reduction and Parking Brake Assembly 7-38
TABLE OF CONTENTS
TOC-7
126 Assembling Reduction and Parking Brake Assembly 7-39
127 Assembly Sequence of Reduction Differential 7-40
128 Suggestions for Assembling Reduction Differential 7-40
13 Troubleshooting 7-41
14 Service Data7-42
141 Front Axle 7-42
142 Reduction Differential7-45
Chapter 8 REAR AXLE
1 Specifications 8-1
2 Structure 8-2
21 Rear Axle8-2
22 Power Steering Cylinder 8-3
3 Removing Rear Wheel8-4
31 Preparation 8-4
32 Removal Sequence8-5
33 Suggestions for Removal8-6
4 Installing Rear Wheel 8-6
41 Suggestions for Installation 8-6
5 Removing Rear Axle 8-7
51 Preparation 8-7
52 Removal Sequence8-7
6 Installing Rear Axle8-9
61 Suggestions for Installation 8-9
7 Disassembling Rear Axle Assembly 8-10
71 Disassembly Sequence 8-10
72 Suggestions for Removal8-11
8 Assembling Rear Axle8-13
81 Assembly Sequence 8-13
9 Disassembling Power Steering Cylinder8-18
91 Disassembly Sequence 8-18
92 Suggestions for Disassembly 8-19
10 Inspecting and Adjusting Power Steering Cylinder 8-20
11 Assembling Power Steering Cylinder8-21
111 Assembly Sequence 8-21
112 Suggestions for Assembly 8-21
12 Adjustment 8-23
121 Measuring Minimum Turning Radius 8-23
13 Troubleshooting 8-25
14 Service Data8-26
141 Rear Axle8-26
142 Power Steering Cylinder 8-27
TABLE OF CONTENTS
TOC-8
Chapter 9 BRAKE SYSTEM
1 Specifications9-1
11 Dry Brake System 9-1
2 Structure 9-2
21 Outline of Wheel Brake System9-2
22 Air Governor9-3
23 Air Dryer 9-4
24 Relay Valve 9-7
25 Brake Control Valve9-9
26 Air Master 9-10
27 Wheel Brake 9-13
28 Parking Brake System 9-14
29 Parking Brake Lever 9-15
210 Parking Brake 9-16
3 Removing Wheel Brake 9-17
31 Preparation 9-17
32 Removal Sequence9-17
33 Suggestions for Removal9-18
4 Installing Wheel Brake9-20
41 Suggestions for Installation 9-20
5 Disassembling Wheel Brake 9-21
51 Disassembly Sequence 9-21
52 Suggestions for Disassembly9-22
6 Inspecting and Repairing Wheel Brake9-23
7 Assembling Wheel Brake 9-24
71 Assembly Sequence 9-24
72 Suggestions for Assembly 9-25
8 Disassembling Wheel Cylinder 9-27
81 Disassembly Sequence 9-27
9 Inspecting and Repairing Wheel Cylinder9-28
10 Disassembling Air Governor9-29
101 Disassembly Sequence 9-29
11 Assembling Air Governor9-29
12 Assembling Wheel Cylinder 9-29
121 Suggestions for Assembly 9-29
13 Disassembling Air Master9-30
131 Disassembly Sequence 9-30
132 Suggestions for Disassembly9-30
14 Assembling Air Master 9-31
141 Suggestions for Assembly 9-31
15 Disassembling Parking Brake9-32
151 Disassembly Sequence 9-32
16 Inspecting and Repairing Parking Brake 9-33
17 Assembling Parking Brake9-33
171 Suggestions for Assembly 9-33
TABLE OF CONTENTS
TOC-9
18 Disassembling Brake Control Valve 9-34
181 Disassembly Sequence 9-34
19 Assembling Brake Control Valve 9-35
191 Suggestions for Assembly 9-35
20 Disassembling Air Dryer9-36
201 Disassembly Sequence 9-36
21 Inspecting and Repairing Air Dryer 9-37
211 Scheduled Inspection of Air Dryer9-37
22 Assembling Air Dryer9-38
221 Suggestions for Assembly 9-38
23 Adjusting and Testing Actuation 9-40
231 Inspecting Wheel Brake 9-40
232 Bleeding Brake System 9-41
233 Bleeding Brake Pedal 9-41
234 Inspecting Brake Control Valve9-42
235 Adjusting Parking Brake 9-43
24 Troubleshooting 9-44
241 Wheel Brake9-44
242 Parking Brake 9-45
243 Air Dryer 9-45
25 Service Data9-46
251 Brake Pedal 9-46
252 Brake Control Valve 9-46
253 Air Master 9-47
254 Wheel Brake9-49
255 Wheel Cylinder 9-50
256 Parking Brake Lever 9-51
257 Parking Brake Drum 9-52
258 Air Dryer9-53
Chapter 10 STEERING SYSTEM
1 Specifications 10-1
2 Structure 10-1
21 Steering System10-1
22 Steering Valve 10-3
23 Steering Column 10-5
3 Removing and Installing Steering Valve Piping10-6
31 Main Components10-6
32 Suggestions for Disassembly and Assembly10-6
4 Removing and Installing Steering Wheel, Steering Valve,
and Tilt Lock Lever10-7
41 Removing Steering Wheel 10-8
42 Installing Steering Wheel10-8
43 Inspecting Steering Wheel After Installation10-9
44 Removing Steering Valve10-9
45 Installing Steering Wheel10-10
TABLE OF CONTENTS
TOC-10
46 Disassembling Tilt Lock Lever 10-10
47 Assembling Tilt Lock Lever 10-11
5 Disassembling Steering Valve 10-12
51 Disassembly Sequence 10-12
52 Suggestions for Disassembling Steering Valve10-13
53 Inspecting Steering Valve after Disassembly10-16
6 Assembling Steering Valve 10-17
61 Preparation 10-17
62 Assembly Sequence 10-17
63 Suggestions for Assembly 10-18
7 Troubleshooting10-23
8 Service Data 10-24
Chapter 11 HYDRAULIC SYSTEM
1 Specifications11-1
2 Structure 11-2
21 Hydraulic Line 11-2
22 Hydraulic Tank 11-3
23 Gear Pump 11-4
24 Priority Valve11-5
25 Control Valve11-6
26 Lift and Tilt Cylinders 11-8
27 Flow Regulator Valve 11-9
3 Removing Control Valve 11-10
31 Preparation 11-10
32 Removal Sequence11-10
33 Suggestions for Removal11-11
4 Removing Lift Cylinders 11-12
41 Suggestions for Removal11-13
5 Installing Lift Cylinders11-13
51 Suggestions for Installation 11-13
6 Removing Tilt Cylinders 11-14
61 Preparation 11-14
62 Removal Sequence11-14
63 Suggestions for Removal11-15
7 Removing Gear Pump11-16
8 Disassembling Gear Pump 11-17
81 Preparation 11-17
82 Disassembly Sequence 11-17
83 Suggestions for Disassembly 11-18
9 Inspecting and Repairing Gear Pump11-19
10 Assembling Gear Pump 11-21
101 Preparation 11-21
102 Suggestions for Assembly 11-21
11 Installing Gear Pump 11-22
TABLE OF CONTENTS
TOC-11
12 Disassembling Priority Valve11-23
121 Disassembly Sequence 11-23
122 Suggestions for Disassembly 11-23
13 Assembling Priority Valve 11-23
131 Suggestions for Assembly 11-23
14 Disassembling and Assembling Control Valve 11-24
141 Disassembly Sequence 11-24
142 Assembly Sequence 11-24
143 Suggestions for Assembly 11-24
144 Disassembling Inlet Valve Assembly 11-25
145 Cleaning and Inspecting Inlet Valve Assembly 11-30
146 Assembling Inlet Valve Assembly 11-30
147 Disassembling and Assembling Tilt Valve Assembly 11-34
148 Cleaning and Inspecting Tilt Valve Assembly 11-36
149 Assembling Tilt Valve Assembly 11-36
1410 Disassembling and Assembling Attachment Valve Assembly 11-38
1411 Cleaning and Inspecting Attachment Valve Assembly 11-40
1412 Assembling Attachment Valve Assembly11-40
15 Disassembling Flow Regulator Valve 11-42
151 Disassembly Sequence 11-42
16 Inspecting and Repairing Flow Regulator Valve 11-42
17 Assembling Flow Regulator Valve 11-42
18 Disassembling Lift Cylinder 11-43
181 Disassembly Sequence 11-43
182 Suggestions for Disassembly 11-44
19 Inspecting Lift Cylinder 11-45
20 Assembling Lift Cylinders11-47
201 Assembly Sequence 11-47
202 Suggestions for Assembly 11-47
21 Disassembling Tilt Cylinder 11-49
211 Disassembly Sequence 11-49
212 Suggestions for Disassembly 11-50
22 Inspecting and Repairing Tilt Cylinder 11-50
23 Assembling Tilt Cylinder 11-52
231 Assembly Sequence 11-52
232 Suggestions for Assembly 11-52
24 Inspecting and Adjusting Hydraulic System11-53
241 Hydraulic Oil11-53
242 Test Operation of Gear Pump 11-53
243 Control Valve 11-54
244 Adjusting Main Relief Valve 11-55
245 Checking Priority Valve Function 11-56
25 Drift Test 11-57
251 Loaded Drift Test 11-57
252 Tilt Drift Test11-57
26 Troubleshooting 11-58
TABLE OF CONTENTS
TOC-12
27 Service Data 11-61
271 Gear Pump 11-61
272 Control Valve11-62
273 Priority Valve11-63
274 Hydraulic Tank 11-64
275 Flow Regulator Valve 11-65
276 Lift Cylinder 11-66
277 Tilt Cylinder 11-67
Chapter 12 MAST AND FORKS
1 Specifications12-1
11 Mast 12-1
12 Forks 12-1
2 Structure 12-2
3 Removing Mast and Lift Bracket 12-3
31 Removal Sequence12-3
32 Suggestions for Removal12-4
4 Disassembling Mast Assembly 12-6
41 Disassembly Sequence 12-6
42 Suggestions for Disassembly12-7
5 Inspecting and Repairing Mast Assembly12-8
6 Assembling Mast Assembly 12-10
61 Suggestions for Assembly 12-10
7 Adjusting Mast Assembly12-15
8 Troubleshooting12-19
9 Service Data 12-20
Chapter 13 SIDE SHIFTER
1 Applicable Attachment Models 13-1
2 Specifications13-2
21 Applicable Forks13-2
3 Structure 13-3
31 Side Shifter 13-3
32 Side Shifter With Fork Positioner 13-5
4 Removing Main Roller and Side Roller From Lift Bracket 13-7
41 Removal Sequence13-7
5 Adjusting Lift Bracket Clearance13-8
6 Installing Main Roller and Side Roller 13-8
61 Suggestions for Installation 13-8
7 Disassembling Side Shifter (With Fork Positioner) Cylinder 13-9
71 Disassembly Sequence 13-9
72 Suggestions for Disassembly13-9
8 Assembling Side Shifter (With Fork Positioner) Cylinder 13-10
81 Assembly Sequence 13-10
TABLE OF CONTENTS
TOC-13
82 Suggestions for Assembly 13-10
9 Inspecting and Adjusting Side Shifter Cylinder13-10
10 Troubleshooting 13-11
Chapter 14 FORK POSITIONER
1 Applicable Attachment Models14-1
2 Specifications 14-2
21 Fork Positioner 14-2
22 Applicable Fork Blades 14-2
3 Structure 14-3
4 Removing Fork Positioner 14-4
41 Preparation 14-4
42 Removal Sequence of Fork Positioner (Simultaneous Move Type)14-4
43 Removal Sequence of Fork Positioner (Independent Move Type)14-5
44 Suggestions for Removing Fork Positioner 14-6
5 Inspecting and Repairing Fork Positioner 14-7
6 Installing Fork Positioner14-7
61 Suggestions for Installation 14-7
7 Disassembling Fork Positioner Cylinder 14-9
71 Disassembly Sequence 14-9
72 Suggestions for Disassembly 14-10
8 Inspecting and Repairing Fork Positioner Cylinder14-11
9 Assembling Fork Positioner Cylinder 14-13
91 Assembly Sequence 14-13
92 Suggestions for Assembly 14-13
10 Inspection and Adjustment After Assembling Fork Positioner 14-14
11 Troubleshooting 14-15
12 Service Data14-16
Chapter 15 SERVICE DATA
1 Maintenance Schedule15-1
2 Tightening Torques for Standard Bolts and Nuts 15-6
21 Metric Fine Thread15-6
22 Metric Coarse Thread 15-8
3 Periodic Replacement Parts 15-10
31 Location of Periodic Replacement Parts 15-10
4 Lubrication Schedule 15-11
41 Lubrication Chart 15-11
42 Fuel and Lubricant Specifications 15-12
43 Adjustment Value and Oil Capacity 15-13
5 Weight of Major Devices 15-14
6 Special Tools15-15
TABLE OF CONTENTS
TOC-14
Chapter 16 HOW TO READ CIRCUIT DIAGRAMS
1 Description of Circuit Diagrams16-1
11 Circuit Diagrams16-1
12 Connector Diagrams 16-1
2 How to Read Circuit Diagrams 16-2
21 Symbols 16-3
22 Sheet Symbol 16-6
23 Connecting Lines 16-7
24 Equipment 16-8
25 Relay Contactor and Coil 16-9
26 Connectors 16-9
27 Indication of Connecting Line 16-10
28 Indication of GND (Earth)16-10
29 Indication of Another Specification 16-11
3 How to Read Connector Diagrams 16-12
4 Abbreviation16-14
Chapter 17 CIRCUIT DIAGRAM
VIDEO PREVIEW OF THE MANUAL:
IMAGES PREVIEW OF THE MANUAL:
PLEASE NOTE:
- This is the same manual used by the DEALERSHIPS to SERVICE your vehicle.
- The manual can be all yours – Once payment is complete, you will be taken to the download page from where you can download the manual. All in 2-5 minutes time!!
- Need any other service / repair / parts manual, please feel free to contact us at heydownloadss @gmail.com . We may surprise you with a nice offer