Linkbelt 240X2-MH HYDRAULIC EXCAVATOR OPERATOR’S MANUAL – PDF DOWNLOAD
IMAGES PREVIEW OF THE MANUAL:
DESCRIPTION:
Linkbelt 240X2-MH HYDRAULIC EXCAVATOR OPERATOR’S MANUAL – PDF DOWNLOAD
To the Owner:
- Your machine has been designed and built to the highest standards of quality. It conforms to all current safety
regulations. However, the risk of accidents can never be completely excluded. That is why it is essential to
observe elementary safety rules and precautions. Hazard control and accident prevention are dependent upon
the awareness, concern and prudence of the operator. Personnel involved in the operation, transport, maintenance
and storage of equipment must be suitably trained. - Read this manual carefully, paying particular attention to the instructions concerning safety, operation and
maintenance so as to avoid the risk of injury while operating or servicing the machine. - Use this manual as a guide. Your machine will remain a reliable working tool provided it is kept in good working
condition and serviced properly. - The standard attachments and equipment available for use with this machine are intended for general earthmoving
purposes, material rehandling, ditch cleaning, etc. If the machine is to be used for handling loads,
(concrete pipe sections, shoring material, etc.), make sure the machine is suitably equipped for this type of
work. - Do not use this machine for any application or purpose other than those described in this manual. If the
machine is to be used for work involving the use of special attachments, accessories or equipment, consult
your authorized LBX Link-Belt distributor in order to make sure that any adaptations or modifications made are
in keeping with the machine’s technical specifications and with prevailing safety requirements.
Any modification or adaptation which is not approved by the manufacturer may invalidate the machine’s initial conformity with safety requirements. - The machine must undergo regular inspections, the frequency of which varies according to the type of use.
Consult your authorized LBX Link-Belt distributor.
TABLE OF CONTENTS:
Linkbelt 240X2-MH HYDRAULIC EXCAVATOR OPERATOR’S MANUAL – PDF DOWNLOAD
To the Owner 0-1
Safety Labels 0-2
For Safe Driving 0-3
Safety Section 0-7
Precaution Identification Plates (DECALS) 0-8
Identification Plates inside the Cabin 0-8
Outside Identification Plate 0-13
Precaution Identification Plates on Parts (Examples)
Prior to Operation 0-19
Confirmation of Safety items 0-21
During Operation 0-24
While Traveling 0-27
After Operating 0-29
While Transporting 0-30
Before Regular Inspection & Maintenance 0-31
Inspection and Maintenance 0-32
Instruments and Controls 1-0
Location of Components 1-1
Overall View 1-1
Operator’s Cab 1-2
Seat and Console 1-3
Right Panel 1-4
Console right side front 1-4
Explanation of device 1-5
Console right side front 1-5
Right Console 1-6
Right Control lever 1-8
Left Console 1-9
Left Control lever 1-10
Right Panel 1-12
Control Levers 1-19
Operator’s Seat 1-22
Operator’s Cab 1-23
Radio 1-28
Air Conditioner 1-30
Fuses 1-37
Battery 1-38
Starting the Engine by Using Booster Cables 1-39
Anti-theft Protection 1-41
Anti-theft Protection 1-41
Using the Anti-theft Protection Function 1-42
Operating Instructions 2-0
Operation of New Machine 2-1
Using a New Machine 2-1
Daily Inspections 2-2
Daily Inspections 2-2
Interference prevention system 2-4
Function of interference prevention system 2-4
Inspection of interference prevention system before
starting operation 2-5
Instructions of anti-interference device KHP14520 2-6
Precautions in handling interference prevention system
2-7
Regarding machines shipped as the machine intended
for commonly use both in the magnet and the other
end-attachment 2-8
Emergency Lowering Device 2-9
Inspection of emergency lowering device before starting
operation 2-9
Emergency lowering device KHP14510 2-10
Points to notice when operating emergency lowering
device 2-11
In case where operation of the emergency lowering device
is in trouble 2-12
Starting and Stopping the Engine 2-13
Inspections before Starting the Engine 2-13
Starting the Engine 2-14
Inspections after Starting the Engine 2-15
Stopping the Engine (Normal Operation) 2-16
Warm-up Operation 2-17
Warm-up Operation 2-17
Operations (Traveling) 2-19
Operations (Swing) 2-26
Swing Operation 2-26
Operations (Attachment) 2-27
Operations 2-28
Characteristics of Hydraulic Excavator 2-28
Cautions for operations 2-28
Cautions for Interference 2-29
Special Attachment 2-30
Operating Instructions (Cautions) 2-31
Operating Instructions (Procedures) 2-33
Operation of magnet 2-35
Operation of magnet 2-35
Operation control 2-36
Monitor operation in detail 2-39
Monitor operation in detail 2-39
On engine speed in magnet mode 2-43
Bucket: Turning Over and Replacement 2-44
Bucket: Turning Over and Replacement 2-44
On Completion of Daily Operations 2-46
On Completion of Daily Operations 2-46
Operating in Cold Climates 2-48
Operating under Extreme Conditions 2-49
Transportation 2-50
Loading and Unloading 2-50
Switch settings during loading and unloading 2-50
Transportation 2-50
Storing 2-55
Inspections and Maintenance 3-0
General Cautions 3-1
Periodic Maintenance Check List 3-3
Daily Inspections (Prior to Operation) 3-3
Periodic Maintenance Check List 3-4
Fuel / Lubricants for Different Ambient Temperature
Settings 3-5
Genuine LBX Company LLC Parts and Elements 3-6
Disposable Items 3-7
Grease / Oil and Elements 3-8
Inspection Prior to Operation 3-9
Inspections Prior to Operation 3-9
0-6-2
Table of Contents
Greasing Attachments 3-13
Greasing Front Attachment Pins 3-13
Greasing Elevator Cab 3-15
Greasing Elevator Cab 3-15
Fuel System 3-16
Fuel 3-16
Fuel Refilling and Fuel Level Checking 3-19
Drainage of Water and Sediments in the Fuel Tank
3-19
Draining Water from the Pre Fuel Filter 3-20
Pre Fuel Filter Replacement 3-21
Draining Water from the Fuel Filter (Main) 3-22
Fuel Filter (Main) Replacement 3-22
Engine 3-24
Engine Oil Replacement 3-24
Engine Oil Filter Replacement 3-24
Cooling System 3-26
Inspecting and Refilling Coolant 3-26
Replacing the Coolant 3-27
Cleaning and Inspecting the Radiator Net and Fin
3-28
Cleaning and Replacing the Air Cleaner (double elements)
3-29
Inspection and Adjustment of Fan Belt 3-31
Bolt Torque 3-32
Bolt and Nut Torque 3-32
Hydraulic Oil 3-36
Hydraulic Oil Level Inspection 3-36
Refilling Hydraulic Oil 3-36
Draining Water and Sediment from the Hydraulic Oil
Tank 3-37
Hydraulic Oil Management 3-38
Hydraulic Oil Replacement 3-38
Bleeding Air from the Hydraulic Components 3-39
Air Bleeding Procedures 3-39
Air Bleeding from Hydraulic Pump 3-39
Air Bleeding from Cylinder 3-40
Air Bleeding from Swing Motor 3-40
Cleaning and Replacing Suction Filter 3-41
Replacing Return Filter 3-41
Replacing Air Breather Element 3-42
Replacing Pilot Oil Filter Element 3-42
Checking Hoses and Lines 3-43
Battery 3-44
Battery Inspection and Charge 3-44
Inspection of accessories 3-46
Inspection of accessories 3-46
Upper Frame 3-47
Turntable Bearing Greasing 3-47
Greasing Swing Ring Gear 3-47
Swing Unit 3-48
Oil Level Inspection and Refilling of Swing Reduction
Gear 3-48
Oil Replacement for Swing Reduction Gear 3-48
Travel Unit 3-49
Travel Reduction Gear 3-49
Oil Level Inspection and Refilling of Travel Reduction
Gear 3-49
Oil Replacement for Travel Reduction Gear 3-49
Inspecting Upper/Lower Take-up Roller (Idler Wheel)
Inspection and Tightening of Shoe Plate 3-50
Cleaning Crawler 3-50
Inspection and Adjustment of Track Shoe Tension
Magnet 3-52
Adjustment of Magnet Backlash 3-52
Air Conditioner 3-53
Inspection and Care of Air Conditioner 3-53
Routine Replacement Safety Parts 3-57
Troubleshooting 3-58
Contacting Us 3-63
Specifications 4-0
CONVERSION FACTORS 4-1
CONVERSION FACTORS 4-1
Specifications 4-2
Optional Components 5-0
Selector Valve 5-1
Selector valve (2-way) 5-1
VIDEO PREVIEW OF THE MANUAL:
PLEASE NOTE:
- This is the same manual used by the dealers to diagnose and troubleshoot your vehicle
- You will be directed to the download page as soon as the purchase is completed. The whole payment and downloading process will take anywhere between 2-5 minutes
- Need any other service / repair / parts manual, please feel free to contact [email protected] . We still have 50,000 manuals unlisted
I.G