Liebherr L 580 1456 Wheel Loader Service Manual – PDF DOWNLOAD
FILE DETAILS:
Liebherr L 580 1456 Wheel Loader Service Manual – PDF DOWNLOAD
Language : English
Pages : 646
Downloadable : Yes
File Type : PDF
Size: 146 MB
DESCRIPTION:
Liebherr L 580 1456 Wheel Loader Service Manual – PDF DOWNLOAD
- This service manual is designed for trained specialist staff of the Liebherr organisation and their dealers.
- This service manual contains specialist knowledge for repairing Liebherr construc- tion machines. Basic specialist knowledge on electronics, hydraulics, mechanics and engine technology is not contained in this service manual. Therefore special- ized training and qualifications are necessary. Liebherr recommends participating in the Liebherr training program for construction machines.
In this service manual you will find information on:
- You will find information on controls and operation in the operator’s manual. Information on spare parts are in the spare parts catalogue. Please observe the local accident prevention laws.
- You can find information on repairs of machine parts in the service documentation under “Wheel loader – repair instructions”.
Introduction:
To ensure safe operation:
- Consult with the worksite manager about safety regulations at the place of use.
- Adhere to safety regulations at the place of use.
- Follow traffic regulations.
- Adhere to valid guidelines provided by insurers (for example, employers’ professional liability insurance companies, accident insurance, etc.).
- Avoid working methods that can endanger safety.
- Follow all intervals specified for recurrent checks and inspections as outlined in this operator’s manual.
1.2. Intended Use of Wheel Loader
The wheel loader is used to pick up, move, and dump the following materials:
- Soil
- Stones
- Broken rocks
- Bulk materials
This applies to a standard machine under normal operating conditions. Special applications are described in a separate options operator’s manual.
To ensure the intended use:
- Adhere to the operator’s manual.
- Follow maintenance intervals.
- Carry out inspection and maintenance tasks.
- Follow the specifications in the technical data.
- When using the machine on public roads, ensure it complies with applicable national regulations.
- Only lift loads with intended working attachments (fork prongs, crane boom), which must be properly fitted and functioning.
- Ensure that machines used underground (for mining and tunnel construction) are fitted with systems to reduce exhaust emissions (such as diesel particulate filters).
- Adhere to the requirements of each individual country for underground operation.
- For special uses, use special working attachments and, if necessary, special safety equipment.
- Exclusively mount and use special working attachments with approval and as per the stipulations of the manufacturer of the basic machine.
IMAGES PREVIEW OF THE MANUAL:
TABLE OF CONTENTS:
Liebherr L 580 1456 Wheel Loader Service Manual – PDF DOWNLOAD
010.1 Safety instructions 010-4
010.1.1 Information on these instructions 010-4
010.1.1.1 Representation of warning messages 010-4
010.1.1.2 Graphic symbols in these instructions 010-4
010.1.2 Intended use 010-5
010.1.2.1 Laws, rules, guidelines and safety regulations 010-5
010.1.2.2 Intended use 010-5
010.1.2.3 Foreseeable misuse 010-6
010.1.2.4 Operating conditions 010-6
010.1.2.5 Disposal 010-7
010.1.3 Description of staff 010-7
010.1.3.1 Personal protective equipment 010-7
010.1.3.2 Requirements for staff 010-8
010.1.3.3 Operating company 010-8
010.1.3.4 Operator 010-9
010.1.3.5 Maintenance staff 010-9
010.1.3.6 Refrigeration technician 010-10
010.1.3.7 Slinger 010-11
010.1.3.8 Spotter 010-12
0101.4 Protective devices on the machine 010-12
010.1.4.1 Operator’s cab 010-12
010.1.4.2 Roll over protective structure (ROPS) 010-13
010.1.4.3 Falling object protective structures (FOPS) 010-13
0101.5 Emergency equipment on the machine 010-13
010.1.5.1 Emergency exit (standard) 010-13
010.1.5.2 Fire extinguisher (option) 010-14
010.1.6 Safe operation 010-14
010.1.6.1 Intoxicants 010-14
010.1.6.3 Transporting machine 010-15
010.1.6.4 Access to machine 010-15
010.1.6.5 Machine danger zone 010-16
010.1.6.6 Visibility 010-16
010.1.6.7 Protection against vibration 010-17
010.1.6.8 Operation of machine 010-18
010.1.7 Safe maintenance 010-21
010.1.7.1 Spare parts 010-21
010.1.7.2 Heavy parts 010-21
010.1.7.3 Regular checks 010-22
010.1.8 Modifications to the machine 010-22
010.1.8.1 Modifications, add-ons and retrofittings 010-22
Special tools for maintenance and repair work 010-23
010.21 Special tools, general 010-23
010.2.2 Special tools for the diesel engine 010-23
010.2.3 Special tools for the electrical system 010-24
010.2.4 Special tools for the transmission 010-25
010.2.5 Special tools for front axle MT-L II 010-25
010.2.6 Special tools for rear axle MT-L II 010-25
010.2.7 Special tools for the air conditioning system 010-26
010.2.8 Special tools for cab glazing 010-26
010.2.9 Special tools for the central lubrication system (Liebherr) 010-26
Standards and regulations 010-28
010.3.1 Prestressing forces and tightening torques for bolts with metric
standard and fine threads as per DIN ISO 261 010-28
010.3.1.1 Range of application and purpose 010-28
010.3.1.2 Other applicable documents 010-28
010.3.1.3 Modifications and descriptions 010-29
010.3.1.4 Tightening torques 010-29
010.3.2 Liebherr standards for assembly instructions and tightening torquesp10-35
Preservation guidelines 010-36
010.4.1 General information 010-36
010.4.2 Machine out of service for an unknown period of time 010-36
010.4.3 Putting the machine out of service 010-37
010.4.3.2 Out of service for up to 12 months 010-38
010.4.3.3 Out of service for longer than 12 months 010-39
010.44 Putting back into service 010-39
010.4.4.1 After being out of service for 2 months 010-39
010.4.4.2 After being out of service for 12 months 010-40
010.4.4.3 After being out of service for longer than 12 months 010-40
020 Technical data 020-1
020.1 Overall machine 020-5
0201.1 Complete machine with loading bucket
L580-1456/30186-; 020-5
0201.2 Complete machine with loading bucket (industrial lift arms)
L580-1456/30186-; 020-6
020.1.3 Working attachment: light material bucket
L580-1456/30186-; 020-8
020.1.4 Working attachment: log grappler
L580-1456/30186-; 020-9
020.2 Drive group 020-12
020.2.1 Diesel engine
L580-1456/30186-; 020-12
0202.2 Fuel tank
L580-1456/30186-; 020-13
020.2.3 Fuel level sensor
L580-1456/30186-; 020-13
020.2.4 Fuel pre-filter (separator filter)
L580-1456/30186-; 020-13
020.2.5 Air filter vacuum switch
L580-1456/30186-; 020-13
0202.6 Clutch
L580-1456/30186-; 020-14
020.2.7 Splitter box
L580-1456/30186-; 020-14
020.3 Cooling system 020-15
020.3.1 Fan gear pump
L580-1456/30186-; 020-15
020.3.2 Fan gear motor
L580-1456/30186-; 020-15
020.3.3 Hydraulic oil temperature sensor B8
L580-1456/30186-; 020-15
020.4 Working hydraulics 020-16
020.4.2 Control valve block
020.4.3 Pilot control unit
020.4.4 Working hydraulics lockout solenoid valve Y14
020.4.5 Pilot control hydro accumulator
020.4.6 Stabilisation module
020.4.7 Ride control hydro accumulator
020.4.8 Z kinematics and industrial lift arms lift cylinder
020.4.9 Z kinematics tilt cylinder
Travel hydraulics 020-19
020.5.1 Travel pump
020.5.2 Travel motor 1
020.5.3 Travel motor 2
020.5.4 Variable displacement motor scavenging gear pump
Hydraulic components 020-21
020.6.1 Filter unit
020.6.2 Breather filter
Steering system 020-22
020.7.1 Steering pump
020.7.2 Servostat
020.7.3 Steering cylinder
020.7.4 Steering damper hydro accumulator
020.7.5 Emergency steering pump
020.7.7 Emergency steering check pressure switch B3a
L580-1456/30186-; 020-23
020.8 Brake system 020-24
020.8.1 Brake system gear pump
L580-1456/30186-; 020-24
0208.2 Compact brake valve
L580-1456/30186-; 020-24
020.8.3 Service brake hydro accumulator
L580-1456/30186-; 020-24
0208.4 Brake light pressure switch B12
L580-1456/30186-; 020-24
020.8.5 Accumulator charge pressure switch B19
L580-1456/30186-; 020-25
0208.6 Parking brake hydro accumulator
L580-1456/30186-; 020-25
020.8.7 Overspeed protection solenoid valve Y16
L580-1456/30186-; 020-25
020.9 Electrical system 020-26
020.9.1 Central control unit (Master 4)
L580-1456/30186-; 020-26
020.9.2 Input module
L580-1456/30186-; 020-26
020.9.3 Output module
L580-1456/30186-; 020-26
020.9.4 Battery
L580-1456/30186-; 020-27
0209.5 Voltage transformer
L580-1456/30186-; 020-27
020.10 Gearbox 020-28
020.10.1 Transmission
L580-1456/30186-; 020-28
2 020.10.2 Gear shifting solenoid valves
8 L580-1456/30186-; 020-29
£ 020.10.3 Speed sensors
z L580-1456/30186-; 020-29
§ 020.10.4 Transmission gear pump
8 L580-1456/30186-; 020-29
: 020.11 Axles and drive shafts 020-30
3 020.11.1 Front cardan shaft
L580-1456/30186-; 020-30
020.112 Rear cardan shaft
L580-1456/30186-; 020-30
020.11.3.2 Special tyres 020-31
020.12 Steel parts of the basic machine 020-32
020.12.1 Ballast weight
L580-1456/30186-; 020-32
020.13 Operator’s cab, heating and air conditioning 020-33
020.13.1 Heating, air conditioning
L580-1456/30186; 020-33
020.13.2.1 Air conditioning 020-33
020.13.3.1 Air conditioning compressor 020-33
020.13.4 Condenser
L580-1456/30186-; 020-33
020.13.5 Dryer
L580-1456/30186-; 020-34
020.13.6 Air conditioning pressure switch
1 580-1456/30186-; 020-34
020.14 Lubrication system 020-35
020.14.1 Central lubrication system (Liebherr)
L580-1456/30186-; 020-35
020.14.1.1 Central lubrication pump 020-35
020.14.1.2 Progressive distributor 020-35
020.14.2 Progressive distributor
L580-1456/30186-; 020-36
020.1421 MXF 020-36
020.1422 MXF 25 020-36
020.14.2.3 MX-F 45 020-37
020.14.24 MX-F75 020-37
020.14.2.5 MX-F105 020-37
030 Maintenance 030-1
030.1 Maintenance and inspection schedule 030-10
030.2 Filling quantities and lubrication chart 030-15
030.2.1 Recommended lubricants
L580-1456/30186-; 030-15
030.22 Recommended operating fluids
L580-1456/30186-; 030-16
030.3 Lubricants and fuels 030-17
030.3.1 General information on lubricants and fuels 030-17
030.3.2 General information on changing lubricants and fuels 030-17
030.3.3 Converting hydraulic system from mineral oils to biodegradable
030.34 Diesel fuels
030.3.5 Lubricating oils for diesel engines
030.36 Refrigerant
030.3.7 Coolant
030.3.8 Hydraulic oil
030.3.9 Lubricating oils for splitter boxes
030.3.10 Lubricating oils for transmissions
030.3.11 Lubricating oils for axles
030.3.12 Lubrication grease and other lubricants
030.3.12.2 Liebherr lubrication grease 030-29
030.4 Maintenance tasks 030-31
030.4.1 Safety precautions
L580-1456/30186-; 030-31
030.4.2 Preparatory tasks for maintenance 030-31
030.4.2.1 Maintenance positions
L.580-1456/30186-; 030-32
0304.2.2 Opening the service accesses
L580-1456/30186; 030-33
030.4.2.3 Turning off the battery main switch
L580-1456/30186-; 030-35
030.4.3 Overall machine 030-36
030.4.3.1 Checking the machine for external damage
L580-1456/30186-; 030-36
030.4.3.2 Removing loose parts, dirt, ice and snow from the
machine
L580-1456/30186-; 030-36
0304.3.3 Cleaning the machine
1 580-1456/30186-; 030-36
030.4.3.4 Checking the machine for leaks
L.580-1456/30186-; 030-38
0304.3.5 Making sure the bolted connections are tight
L580-1456/30186-; 030-38
030.4.3.6 Corrosion protection system for use with salt and arti-
ficial fertilisers (optional): Carrying out corrosion
protection
1 580-1456/30186-; 030-38
030.4.3.7 Oil analyses
1L.580-1456/30186-; 030-38
030.4.4 Drive group 030-45
030.4.4.1 Checking the engine oil level
L580-1456/30186-; 030-45
0304.4.2 Changing the engine oil
L.580-1456/30186-; 030-46
0304.43 Changing the engine oil filter
L580-1456/30186-; 030-47
030.4.4.4 Checking the V-ribbed belt on the engine
1L.580-1456/30186-; 030-48
030.445 Changing the V-ribbed belt on the engine
L580-1456/30186-; 030-50
0304.46 Checking the diesel engine valve clearance
L.580-1456/30186-; 030-50
030.4.4.8 Checking the crankshaft torsional vibration damper
030.4.4.9 Changing the crankshaft torsional vibration damper
030.4.4.10 Draining off condensate and sediment from the fuel
030.4.4.11 Draining off condensate from the Separ fuel pre-filter
030.4.4.12 Draining off condensate from the fuel pre-filter
030.4.4.13 Changing the Separ fuel pre-filter insert
030.4.4.14 Changing the fuel pre-filter
030.4.4.15 Changing the fuel fine filter
030.4.4.16 Bleeding the fuel system
discharge valve
030.4.4.18 Checking the air suction hoses for leaks and tight
030.4.4.19 Changing the air filter main element
030.4.4.20 Changing the air filter safety element
030.4.4.21 Cleaning the oil bath air filter (optional)
030.4.4.22 Checking the oil level in the splitter box
030.4.4.23 Changing the splitter box oil
030.4.4.24 Checking the exhaust system for leaks and tight
030.4.5.2 Checking the coolant antifreeze and corrosion inhib-
L580-1456/30186-; 030-79
0304.5.4 Changing the coolant
1L.580-1456/30186-40358; 030-80
030.4.5.5 Changing the coolant
L580-1456/40359-; 030-82
030.4.6 Working hydraulics 030-85
030.4.6.1 Lubricating the solenoids, universal joints and
tappets on the pilot control unit
L.580-1456/30186-; 030-85
030.4.7 Hydraulic components 030-85
030.4.7.1 Checking the oil level in the hydraulic tank
L580-1456/30186-; 030-85
0304.7.2 Checking and cleaning the magnetic rod on the
hydraulic tank
L.580-1456/30186-; 030-87
0304.7.3 Draining off condensate and sediment from the
hydraulic tank
L580-1456/30186-; 030-88
0304.7.4 Changing the hydraulic tank return suction filter
L580-1456/30186-; 030-89
0304.7.5 Changing the hydraulic tank breather filter
L580-1456/30186-; 030-90
0304.7.6 Hydraulic tank – changing the oil in the hydraulic
system
L580-1456/30186-; 030-90
030.4.8 Steering system 030-92
030.4.8.1 Testing the steering
L580-1456/30186-; 030-92
030.4.8.2 Lubricating the bearing points on the steering cylin-
ders
L580-1456/30186-; 030-93
030.4.9 Brake system 030-94
030.4.9.1 Testing the service brake and parking brake
L580-1456/30186-; 030-94
030.4.9.2 Checking the service brake discs for wear
1L.580-1456/30186-; 030-95
030.4.9.3 Checking the gap and wear on the parking brake
linings
L.580-1456/30186-; 030-97
030.4.10 Electrical system 030-102
030.4.10.1 Checking the lights
L.580-1456/30186-; 030-102
030.4.10.2 Checking the batteries
L580-1456/30186-; 030-103
(optional) on the control lever
L580-1456/30186-; 030-104
L580-1456/30186-; 030-106
030.4.11.2 Changing the transmission oil
L580-1456/30186-; 030-107
030.4.11.3 Changing the transmission oil filter
L580-1456/30186-; 030-109
0304.12 Axles and drive shafts 030-109
030.4.12.1 Checking the axle oil levels
L580-1456/30186-; 030-109
030.4.12.2 Changing the axle oil
1 580-1456/30186-; 030-110
030.4.12.3 Checking the cardan shafts
L580-1456/30186-; 030-112
030.4.124 Checking the tyre pressure
L580-1456/30186-; 030-112
030.4.12.5 Checking the wheel tightness
L580-1456/30186-; 030-112
0304.13 Steel parts of the basic machine 030-113
030.4.13.1 Lubricating the articulation bearing and the rear axle
oscillating bearing
L580-1456/30186-; 030-113
030.4.13.2 Covering – lubricating locks and hinges
L580-1456/30186-; 030-114
030.4.13.3 Greasing the rear section cover lower hinges
L580-1456/30186-; 030-115
030.4.14 Working attachment 030-115
030.4.14.1 Lubricating lift arms and attached working attach-
ment
L580-1456/30186-; 030-115
030.4.14.2 Checking the bucket bearing seals and the bearing
bushings on the lift arms
L580-1456/30186-; 030-116
030.4.14.3 Checking the lift arm bucket stops
L580-1456/30186-; 030-118
030.4.14.4 Lubricating and testing the quick-change device
L 580-1456; 030-119
0304.15 Operator’s cab, heating and air conditioning 030-120
030.4.15.1 Lubricating the elongated hole on the accelerator
L580-1456/30186-; 030-120
030.4.15.3 Changing the fresh and recirculated air filters
030.4.15.4 Checking the condition and function of the safety belt
030.4.15.5 Checking and topping up windscreen washer fluid
030.4.15.6 Checking the seals on the driver’s cab
030.4.15.7 Heating and air conditioning unit: Testing the function
030.4.16.2 Checking the pipes, hoses and lubrication points of
0304.16.3 Checking whether metered quantities are adequate
1L.580-1456/30186-; 030-128
030.5 Testing and adjustment checklist
L580-1456/30186-; 030-129
Testing and adjustment tasks 030-134
030.6.1 Safety precautions
L580-1456/30186-; 030-134
030.6.2 Overall machine 030-134
030.6.2.1 Preparatory tasks for testing and adjustment
L.580-1456/30186-; 030-134
0306.2.2 Bringing the machine up to operating temperature
L580-1456/30186-; 030-136
030.6.3 Drive group 030-136
030.6.3.1 Calibrating the pedals
L.580-1456/30186-; 030-136
0306.3.2 Checking the engine speed
L580-1456/30186-; 030-137
030.6.3.3 Reading the diesel engine service files
L580-1456; 030-137
030.6.4 Cooling system 030-140
030.6.4.1 Fan gear motor proportional pressure relief valve
L580-1456/30186-; 030-140
030.6.5 Working hydraulics 030-142
pressure)
pressure)
L580-1456/30186-;
L580-1456/30186-;
relief valves
relief valve
L580-1456/30186-;
valve
L580-1456/30186-;
sure relief valves
L580-1456/30186-;
relief valve
L580-1456/30186-;
cut-off valve
L580-1456/30186~;
L580-1456/30186-;
filling
L580-1456/30186-;
L580-1456/30186-;
L580-1456/30186-;
L580-1456/30186-;
L580-1456/30186-; 030-171
030.6.7.6 Travel motors, automatic calibration
L.580-1456/30186-; 030-173
030.6.7.7 Hydro accumulator supply, nitrogen filling
L580-1456/30186-; 030-174
030.6.7.8 Engine output
L580-1456/30186-; 030-176
030.6.7.9 Service code M2080 – check hydraulic oil contamina-
tion sensor and magnetic rod
L580-1456/30186-; 030-177
030.6.8 Steering system 030-180
030.6.8.1 Steering pump LS pressure cut-off valve
L.580-1456/30186-; 030-180
030.6.8.2 Steering pump flow regulator (standby pressure)
L580-1456/30186-; 030-181
0306.8.3 Steering pump flow regulator (differential pressure)
L.580-1456/30186-; 030-182
030.6.9 Brake system 030-184
030.6.9.1 Compact brake valve, hydro accumulator charging
function
L580-1456/30186-; 030-184
030.6.9.2 Service brake pressure
L.580-1456/30186-; 030-185
0306.9.3 Service brake hydro accumulator capacity
L580-1456/30186-; 030-186
030.6.9.4 Accumulator charge pressure switch shift pressure
L.580-1456/30186-; 030-187
030.6.10 Electrical system 030-188
030.6.10.1 Central control unit (Master4) Creating a Servicefile
L580-1456/30186-; 030-188
0306.10.2 Setting the IP addresses of the central control unit
(Master4)
L.580-1456/30186-; 030-191
030.6.10.3 Resetting the central control unit (Master4)
L580-1456/30186-; 030-194
030.6.10.4 Testing the CAN line
L.580-1456/30186-; 030-195
030.6.10.5 Addressing the CAN module and checking the
system information
L580-1456/30186-; 030-199
030.6.11 Gearbox 030-202
L.580-1456/30186-; 030-202
L580-1456/30186-; 030-202
0306.12 Operator’s cab, heating and air conditioning 030-204
030.6.12.1 Calibrating the display (Display4)
L580-1456/30186-; 030-204
030.6.12.2 Formatting the display and reinstalling the software
(Display4)
L580-1456/30186-; 030-205
040 Drive group 040-1
040.1 Engine 040-2
040.1.1 Diesel engine overview
L580-1456/30186-; 040-2
0401.2 Fuel system 040-8
040.1.2.1 Overview of the fuel system
L580-1456/30186-; 040-9
040.1.2.2 Fuel level sensor
L580-1456/30186-; 040-10
040.1.2.3 Fuel pre-filter
L580-1456/31403-; 040-12
040.1.2.4 Separ fuel pre-filter
L580-1456/29031-; 040-13
040.1.2.5 Fuel fine filter
L580-1456/30186-; 040-14
040.1.3 Air filter system 040-15
040.1.3.1 Overview of the air filter unit
L580-1456/30186-; 040-15
040.1.3.2 Air filter
L580-1456/30186-; 040-16
040.1.3.3 Vacuum switch for air filter
L580-1456/30186-; 040-17
040.1.4 Exhaust system 040-17
5 040.1.4.1 Overview of the exhaust system
8 L580-1456/30186-; 040-18
< 040.2 Clutch
3 L580-1456; 040-19
§ 040.3 Splitter box
5 L580-1456/30186-; 040-21
3 050 Cooling system 050-1
050.1 Overview of the cooling system
L580-1456/30186-; 050-2
050.2 Cooling system hydraulics 050-4
050.2.1 Overview of the hydraulics cooling system
L580-1456/30186-; 050-4
050.2.2 Fan gear pump
1 580-1456/30186-; 050-6
050.2.3 Fan gear motor
L580-1456/30186-; 050-7
050.3 Cooling system electronics 050-11
050.3.1 Electronic control system — general overview
L580-1456/30186-; 050-11
050.3.2 Hydraulic oil temperature sensor
L580-1456/30186-; 050-12
060 Working hydraulics 060-1
060.1 Overview of the working hydraulics
L580-1456/30186-; 060-2
060.2 Working hydraulics pump
L580-1456/30186-; 060-7
060.3 Z kinematics control valve block
L580-1456/30186-; 060-11
060.4 Pilot control 060-14
060.4.1 Overview of the pilot control unit
L580-1456/30186-; 060-14
060.4.2 Pilot control unit
L580-1456/30186-; 060-15
060.4.3 Working hydraulics lockout solenoid valve
L580-1456/30186-; 060-20
060.4.4 Pilot control hydro accumulator
1 580-1456/30186-; 060-21
060.5 Ride control 060-22
060.5.1 Overview of the ride control system
L580-1456/30186-; 060-22
060.5.2 Stabilisation module
L580-1456/30186-; 060-23
060.5.3 Ride control hydro accumulator
L580-1456/30186-; 060-28
070 Travel hydraulics 070-1
070.1 Travel hydraulics overview
L580-1456/30186-; 070-2
070.2 Travel pump
L580-1456/30186-; 070-7
070.3 Travel motors 070-13
L580-1456/30186-; 070-13
0703.2 Travel motor
L580-1456/30186-; 070-18
070.3.3 Travel motor scavenging gear pump
L580-1456/30186-; 070-24
070.34 Discharge cut-off solenoid valve
L580-1456/30186-; 070-24
070.3.5 Supply hydro accumulator
L580-1456/30186-; 070-26
080 Hydraulic components 080-1
080.1 Hydraulic tank 080-2
080.1.1 Overview of the hydraulic tank
L580-1456/30186-; 080-2
080.1.2 Filter unit
L580-1456/30186-; 080-4
080.1.3 Breather filter
L580-1456/30186-; 080-6
090 Steering system 090-1
090.1 Steering system overview
L580-1456/30186-; 090-2
090.2 Steering pump
L580-1456/30186-; 090-6
090.3 Servostat
L580-1456/30186-; 090-10
090.4 Steering cylinder 090-14
0904.1 Steering cylinder pressure relief valve
L580-1456/33963-; 090-14
090.42 Steering damper hydro accumulator
L580-1456/30186-; 090-15
090.5 Emergency steering 090-16
090.5.1 Emergency steering overview
L580-1456/30186-; 090-16
0905.2 Emergency steering pump
L580-1456/30186-; 090-17
090.5.3 Emergency steering electronics 090-19
090.5.3.1 Overview of the electronic control system
L580-1456/30186-; 090-19
090.5.3.2 Emergency steering pressure switch
L580-1456/30186-; 090-21
090.54 Valve block
L580-1456/30186-; 090-23
100 Brake system 100-1
100.1 Overview of the brake system
L580-1456/30186-; 100-2
100.2 Service brake and parking brake 100-6
100.2.1 Brake system gear pump
1 580-1456/30186-; 100-6
100.2.2 Compact brake valve
L580-1456/30186-; 100-7
100.3 Service brake 100-14
100.3.1 Overview of the service brake
L580-1456/30186-; 100-15
100.3.2 Service brake hydro accumulator
L580-1456/30186-; 100-18
100.3.3 Brake light pressure switch
L580-1456/30186-; 100-19
100.3.4 Accumulator charge pressure switch
1 580-1456/30186-; 100-20
100.4 Parking brake 100-22
100.4.1 Overview of the parking brake
L580-1456/30186-; 100-22
100.4.2 Disc brake
L580-1456/30186-; 100-25
100.4.3 Parking brake hydro accumulator
L580-1456/30186-; 100-27
100.5 Overspeed protection 100-28
100.5.1 Overview of the overspeed protection system
L580-1456/30186-; 100-28
100.5.2 Overspeed protection solenoid valve
1 580-1456/30186-; 100-32
110 Electrical system 110-1
110.1 Overview of the electrical system
L580-1456/30186-; 110-2
110.2 Lighting
L580-1456/30186-; 110-6
110.3 Circuit diagrams
L580-1456/30186-; 110-8
110.4 Electronic control unit 110-10
110.4.2 Central control unit (Master4)
L580-1456/30186-; 110-12
110.4.3 Modules 110-17
110.4.3.1 Overview of the module
L580-1456/30186-; 110-17
110.4.3.2 Input modules
1 580-1456/30186-; 110-19
110.4.3.3 Output modules
L580-1456/30186-; 110-21
110.5 Electrical components in the rear section 110-24
110.5.1 Battery installation
L580-1456/30186-; 110-24
120 Gearbox 120-1
120.1 Overview of the transmission
L580-1456/30186-; 120-2
120.2 Mechanical transmission
L580-1456/30186-; 120-4
120.3 Transmission hydraulics 120-10
120.3.1 Overview of the hydraulic control system
L580-1456/30186-; 120-10
120.3.2 Transmission gear pump
L580-1456/30186-; 120-14
120.3.3 Control valve block
L580-1456/30186-; 120-16
120.3.4 Transmission hydro accumulator
L580-1456/30186-; 120-17
120.4 Transmission electronics 120-18
120.41 Overview of the electronic control system
L580-1456/30186-; 120-18
5 1204.2 Gear shifting solenoid valves
8 L580-1456/30186-; 120-20
a 120.4.3 Speed sensors
5 L580-1456/30186-; 120-21
2 120.44 Gear oil temperature switch
3 L580-1456/30186-; 120-22
z 130 Axles and drive shafts 130-1
130.1 Axles 130-2
130.11 Axles
L580-1456/30186-; 130-2
130.2 Cardan shafts 130-8
130.2.1 Front cardan shaft
1 580-1456/30186-; 130-8
140 Steel parts of the basic machine 140-1
140.1 Vehicle frame 140-2
140.1.1 Articulation bearing
L580-1456/30186-; 140-2
140.1.2 Articulation lock
L580-1456/30186-; 140-3
150 Working attachment 150-1
150.1 Lift arms for Z kinematics 150-2
150.1.1 Pin bearing 150-2
150.1.1.1 Z kinematics standard pin bearing
L.580-1456/30186-; 150-2
150.1.1.2 Bucket bearing
L580-1456/30186-; 150-3
150.2 Quick coupler 150-5
150.2.1 Z kinematics quick coupler
L580-1456/30186-; 150-5
160 Operator’s cab, heating and air conditioning 160-1
160.1 Overview of the cab, heating and air conditioning unit
L580-1456/30186-; 160-3
160.2 Display and control elements 160-5
160.2.1 Electrical components in the control panel 160-5
160.2.1.1 Control unit for main functions
L.580-1456/30186-; 160-5
160.2.1.2 Starter switch
L580-1456/30186-; 160-7
160.2.2 Display
1 580-1456/30186-; 160-8
160.2.3 Touch screen display
L580-1456/30186-; 160-10
160.2.4 Control lever
L580-1456/30186-; 160-11
160.3 Heating, ventilation, air conditioning 160-13
160.3.1 Overview of the heating, ventilation and air conditioning system
L580-1456/30186-; 160-13
160.3.2 Heating and air conditioning unit 160-15
160.3.2.2 Blower
L580-1456/30186-; 160-18
160.4 Air conditioning 160-19
160.4.1 Air conditioning
L580-1456/30186-; 160-19
1604.2 Condenser
L580-1456/30186-; 160-20
160.4.3 Dryer
L580-1456/30186-; 160-22
160.4.4 Air conditioning pressure switch
L580-1456/30186-; 160-23
160.4.5 Evaporator
L580-1456/30186-; 160-25
170 Lubrication system 170-1
170.1 Liebherr automatic central lubrication system 170-2
170.1.1 Overview of Liebherr automatic central lubrication system
L580-1456/30186-; 170-2
170.1.2 Liebherr central lubrication pump
L580-1456/30186-; 170-6
170.1.3 Progressive distributor MX-F
L580-1456; 170-10
200 Diagnosis 200-1
200.1 Malfunctions 200-2
200.1.1 Service code indicator in the display 200-2
200.1.2 C service codes displayed in the LCD 200-3
200.2 Troubleshooting 200-5
200.2.1 Replacing fuses 200-5
200.2.1.1 Fuses in the engine compartment 200-5
200.2.1.2 Plug-in fuses on the relay and fuse board 200-6
VIDEO PREVIEW OF THE MANUAL:
PLEASE NOTE:
- This is the same manual used by the DEALERSHIPS to SERVICE your vehicle.
- The manual can be all yours – Once payment is complete, you will be taken to the download page from where you can download the manual. All in 2-5 minutes time!!
- Need any other service / repair / parts manual, please feel free to contact us at heydownloadss @gmail.com . We may surprise you with a nice offer
S.V