Fendt NA Harvesting 8380 P 8380 P AL 8410 P 8410 P AL WORKSHOP SERVICE MANUAL – PDF DOWNLOAD
DESCRIPTION:
Fendt NA Harvesting 8380 P 8380 P AL 8410 P 8410 P AL WORKSHOP SERVICE MANUAL – PDF DOWNLOAD
1.1 Using the manual
1.1.1 Using the manual
General
All operations described in this manual relating to repairs and maintenance must only be carried out by trained service personnel. The purpose of the manual is to help dealers and workshops start up, service and repair AGCO’s equipment as efficiently and effectively as possible. If the specified procedures are followed and the recommended special tools used where necessary, jobs can be completed within the time indicated in the “Repair Time Schedule” manual.
Pagination
Example: see §3. 7 .3, page 83
This manual is divided into chapters and sections. In the example the figures show:
First figure = Chapter
Second figure = Section
Third figure = Consecutive number in the section in question
69 = Page number in manual
The publication number and version appear at the bottom of the page.
Use
To make it easier to look things up, there is a table of contents at the beginning of every chapter listing the various sections in the chapter.
Modifications
Modified pages have the same section numbering as their predecessors: Only the page number and version number change. The old pages must be destroyed
Service tools
In the case of jobs that require service tools, the number of the tool is specified at the point in the text where it is needed.
Repairs and replacing parts
When replacing parts, it is very important to only ever use genuine AGCO spares. Please pay particular attention to the following points when it comes to repairs and fitting spare parts or other equipment. Fitting non-genuine spare parts may impair the safety of the machine. In some countries it is against the law to fit parts that do not conform to the manufacturer’s specifications. Torque wrenches must always be adjusted in accordance with the instructions given in the workshop manual. Fit locking devices where specified. If the locking device breaks when removed, fit a new one. If non-genuine AGCO parts are fitted, the machine will no longer be covered by the right to complain, as the manufacturer provides a warranty on all AGCO components. AGCO dealers are under the obligation to supply genuine parts only.
Repair Time Schedule
The “Repair Time Schedule” manual contains a table of standard time requirements for the commonest repairs on a combine. The manual’s sections follow the layout of the spare parts catalogue.
TABLE OF CONTENTS:
Fendt NA Harvesting 8380 P 8380 P AL 8410 P 8410 P AL WORKSHOP SERVICE MANUAL – PDF DOWNLOAD
1 Introduction – Specifications 13
1 1 Using the manual 15
1 1 1 Using the manual 15
1 2 General specifications 16
1 2 1 Dimensions and specifications 16
1 2 2 Specification table for tyres with equipment 25
1 3 Safety precautions 28
1 3 1 Safety precautions 28
1 3 2 Safety in the workshop 28
1 3 3 Safety – a word to the mechanic 28
1 3 4 Safety – danger, warning and caution 28
1 3 5 Safety decals 29
1 3 6 General 29
1 3 7 Personal safety 29
1 3 8 Considerations with regard to equipment 30
1 3 9 General considerations 31
1 3 10 Operational considerations 31
1 3 11 Maintenance techniques 32
1 4 Practical advice 34
1 4 1 Practical advice 34
1 5 Start-up instructions 38
1 5 1 General 38
1 5 2 Pre-delivery checks 38
1 5 3 Instruction of combine operator 39
1 6 Conversion tables 43
1 6 1 Conventional units of measurement 43
1 7 Locking and sealing agents 44
1 7 1 Locking and sealing agents 44
1 8 Wheel nut torques 45
1 8 1 Wheels 45
1 8 2 Bolts with metric threads 45
1 8 3 Nuts with metric threads 46
2 Cutting table 47
2 1 General 49
2 1 1 Table, general 49
2 2 Knife drive – wobble box 18-30 ft 50
2 2 1 Removal 50
2 2 2 Assembly 50
2 2 3 Reconditioning the wobble box 51
2 2 4 Positioning the double fingers, knife and crop lifters 57
2 3 Table auger, 18-30 ft 58
2 3 1 Removal 58
2 3 2 Assembly 59
2 3 3 Replacing the shaft on the right-hand side 59
2 3 4 Replacing the shaft on the left-hand side 60
2 3 5 Replacing the crankshaft 61
2 3 6 Replacing the feathering fingers, bearings and bushes 62
2 3 7 Adjusting the table auger and feathering fingers 63
2 4 Table body, 18-30 ft 64
2 4 1 Adjusting the cut-off strips 64
2 4 2 Adjusting and positioning the ground sensor – PowerFlow 65
FENDT 8380 P- 8410 P – EAME 3
D3157800M2-SN 582000001 + SIN 582400000+ SIN 583000001 + SIN 583400001
Table of contents ~ -a!s! ‘ _ ,
2 5 Friction clutch and chain drive 18-30 ft 67
2 5 1 Removing the friction coupling 67
2 5 2 Assembly 67
2 5 3 Replacing the bearings and sprockets 68
2 6 Countershaft, 18-30 ft 69
2 6 1 Removing the countershaft 69
2 6 2 Fitting the countershaft 70
2 7 PowerFlow belts, 18-30 ft 71
2 7 1 PowerFlow belts 71
2 7 2 Removal, belts 71
2 7 3 Assembly, belts 74
2 7 4 Replacing the front rollers and bearings, scraper adjustment 75
2 7 5 Replacing the rear rollers and bearings, scraper adjustment 77
2 7 6 Replacing and aligning the bearing housing, rear rollers 78
2 7 7 Belt tensioning and running-in 79
3 Reel 83
3 1 Reel, 18-30 ft 85
3 1 1 Removal 85
3 1 2 Assembly 86
3 1 3 Replacing the reel tine bar and plastic bearings 87
3 1 4 Replacing the guide rollers, eccentric, guide ring and bearings 88
3 1 5 Replacing the reel plates 89
3 1 6 Replacing the reel tube, bearings 89
3 2 Oil motor and chain drive, 18-30 ft 90
3 2 1 Replacing the oil motor 90
3 2 2 Replacing the flow divider 90
3 3 Hydraulic cylinders, 18-30 ft 91
3 3 1 Replacing the cylinder – reel up/down 91
3 3 2 Replacing the cylinder – reel forward/back 92
3 3 3 Reconditioning of hydraulic cylinders 92
4 Main crop elevator 95
4 1 General 97
4 1 1 Main crop elevator, general 97
4 2 Main crop elevator 98
4 2 1 Removal of Crop Elevator 98
4 2 2 Fitting the crop elevator 99
4 2 3 Bearing block on machine frame 100
4 2 4 Replacing the lifting ram 100
4 2 5 Reconditioning the hydraulic cylinder 101
4 2 6 Replacing the cutting height preset sensor 102
4 3 Crop elevator chain 103
4 3 1 Crop elevator chain, general 103
4 3 2 Removing the crop elevator chain 103
4 3 3 Fitting the crop elevator chain 104
4 3 4 Replacement of slats 105
4 3 5 Replacing the slide rails in the crop elevator 105
4 3 6 Replacing the intermediate plate 106
4 4 Elevator chain top shaft 107
4 4 1 Removing the elevator chain top shaft 107
4 4 2 Fitting the elevator chain top shaft 108
4 4 3 Replacing the bearings 108
4 4 4 Replacing the sprockets and centre bearing 110
4 4 5 Replacing the shaft protection tube 113
4 5 Elevator chain front shaft 114
4 5 1 Removing the elevator chain front shaft 114
4 5 2 Fitting the elevator chain front shaft 115
4 5 3 Replacing the shaft bearings 116
4 6 Elevator countershaft 117
4 6 1 Removing the elevator intermediate shaft 117
4 6 2 Fitting elevator intermediate shaft 118
4 FENDT 8380 P- 8410 P – EAME
D3157800M2- SN 582000001 + SIN 582400000+ SIN 583000001 + SIN 583400001
Table of contents
4 7 Friction clutch and belt drive 119
4 7 1 Removal of friction clutch 119
4 7 2 Fitting the friction clutch 119
4 7 3 Reconditioning of the friction clutch 120
4 8 Adapter 121
4 8 1 Removal of adapter 121
4 8 2 Fitting the adapter 122
4 8 3 Replacing the levelling cylinder 122
4 8 4 Reconditioning the hydraulic cylinder 122
4 8 5 Replacing the angle sensor 123
4 9 Hydraulic reversing 124
4 9 1 Removal of hydraulics motor 124
4 9 2 Removing the hydraulic cylinder 125
5 Threshing unit 127
5 1 General 129
5 1 1 Threshing unit, general 129
5 2 Stone trap 130
5 2 1 Removal 130
5 2 2 Assembly 131
5 3 Concave 132
5 3 1 Removing the concave 132
5 3 2 Fitting the concave 133
5 3 3 Adjusting the concave laterally 133
5 3 4 Concave setting – initial setting 134
5 3 5 Replacing the lead-in plate 135
5 3 6 Replacing the shaft for concave setting 135
5 4 Threshing cylinder 137
5 4 1 Removing the threshing cylinder 137
5 4 2 Fitting the treshing cylinder 138
5 4 3 Replacing the bearings 139
5 4 4 Replacing the rasp bars and backing bars 140
5 4 5 Replacing the shaft and cylinder spiders 140
5 5 Cylinder variator – table clutch 142
5 5 1 Removal, hydraulic variator 142
5 5 2 Assembly, hydraulic variator 143
5 5 3 Reconditioning the hydraulic variator pulley 143
5 5 4 Removal, mechanical variator 145
5 5 5 Assembly, mechanical variator 145
5 5 6 Reconditioning the mechanical variator pulley 146
5 5 7 Removal, hydraulic table clutch 147
5 5 8 Fitting the hydraulic table clutch 148
5 5 9 Reconditioning the hydraulic table clutch 149
5 6 Rear beater 154
5 6 1 Removing the rear beater 154
5 6 2 Fitting the rear beater 155
5 7 Rear beater concave 156
5 7 1 Removing the rear beater concave 156
5 7 2 Fitting the rear beater concave 156
5 8 Rotary separator cylinder 157
5 8 1 Removal, rotary separator cylinder 157
5 8 2 Fitting the rotary separator cylinder 158
5 8 3 Replacing the bearings 158
5 8 4 Replacing the rasp bars 159
5 9 Rotary separator concave 161
5 9 1 Removal, rotary separator concave 161
5 9 2 Fitting the rotary separator concave 162
5 9 3 Concave setting – initial setting 162
5 9 4 Replacing the shaft for concave setting 163
FENDT 8380 P- 8410 P – EAME 5
D3157800M2-SN 582000001 + SIN 582400000+ SIN 583000001 + SIN 583400001
Table of contents ~ -a!s! ‘ _ ,
6 Straw walkers 165
6 1 General 167
6 1 1 Straw walkers, general 167
6 2 Straw walkers 168
6 2 1 Removal, straw walkers 168
6 2 2 Fitting the straw walkers 168
6 3 Crank – front 170
6 3 1 Removal, front crank 170
6 3 2 Fitting the front crank 171
6 3 3 Replacing the bearings 171
6 4 Crank – rear 173
6 4 1 Removal, rear crank 173
6 4 2 Fitting the rear crank 173
6 4 3 Replacing the bearings 173
7 Shaker shoe – Fanning mill 175
7 1 General 177
7 1 1 Shaker shoe – fanning mill, general 177
7 2 Fanning mill 178
7 2 1 Removing the fanning mill 178
7 2 2 Fitting the fanning mill 179
7 2 3 Replacing the fan blades 179
7 2 4 Replacing the fanning mill deflectors 180
7 2 5 Replacing the seals 181
7 3 Main grain pan frame 182
7 3 1 General 182
7 3 2 Removal, main grain pan frame 182
7 3 3 Fitting the main grain pan frame 183
7 3 4 Replacing the swivel arm and bearings 184
7 3 5 Replacing the seals 185
7 4 Second grain pan 186
7 4 1 Removal 186
7 4 2 Fitting the second grain pan 186
7 4 3 Replacing the swivel arm and bearings 187
7 4 4 Adjusting second grain pan 188
7 5 Top shaker shoe 190
7 5 1 Removing the top shaker shoe 190
7 5 2 Assembly 191
7 5 3 Replacing the swivel arm and bearings 192
7 5 4 Replacement of seals 193
7 5 5 Replacing and calibrating the actuator – sieves 193
7 6 Bottom shaker shoe 195
7 6 1 Removing the bottom shaker shoe 195
7 6 2 Assembly 196
7 6 3 Replacing the swivel arm and bearings 197
7 6 4 Replacing the seals 197
7 6 5 Electric sieve setting – initial setting 197
7 7 Bottom augers 198
7 7 1 Removingthegrainauger 198
7 7 2 Fitting the grain auger 198
7 7 3 Removing the returns bottom auger 199
7 7 4 Fitting the returns bottom auger 200
7 8 Eccentric drive 201
7 8 1 Removing the eccentric drive 201
7 8 2 Fitting the eccentric drive 202
7 8 3 Adjusting the connecting rod/ aligning the shaker shoes 203
7 8 4 Replacing the connecting rod bearing 204
7 8 5 Replacing the bearings and eccentric shaft 205
7 9 Transmissions 206
7 9 1 Replacing and reconditioning the fanning mill variator 206
7 9 2 Adjusting the fanning mill variator 207
7 9 3 Replacing and reconditioning the counter drive 208
6 FENDT 8380 P- 8410 P – EAME
D3157800M2- SN 582000001 + SIN 582400000+ SIN 583000001 + SIN 583400001
Table of contents
8 Elevators – augers 209
8 1 Tank filling elevator 211
8 1 1 Removing the tank filling elevator 211
8 1 2 Fitting the tank filling elevator 212
8 1 3 Replacing the top shaft, bearings and sprockets 213
8 1 4 Replacing the bottom sprocket 214
8 1 5 Replacing the elevator chain 215
8 2 Returns auger 216
8 2 1 Removing the returns auger 216
8 2 2 Fitting the returns auger 218
8 2 3 Replacing the top bearing 219
8 2 4 Removing and reconditioning the right-angle gear 219
8 3 De-awn er 221
8 3 1 Removing the de-awner 221
8 3 2 Fitting the de-awner 221
8 4 Tank filling auger 222
8 4 1 Removing the pivotable part 222
8 4 2 Replacing the top bearing 222
8 4 3 Removing the fixed part bearing 223
8 4 4 Reconditioning the right-angle gear 224
8 5 Transmission 226
8 5 1 Replacing the countershaft and bearings 226
9 Engine 227
9 1 General 229
9 1 1 Engine, general 229
9 2 Replacing the engine 230
9 2 1 Removing the engine assembly 230
9 2 2 Fitting the engine assembly 233
10 Unloading auger – Grain tank 235
10 1 Moisture sensor 237
10 1 1 Removing the moisture sensor 237
11 Drive unit 239
11 1 Radiator – intercooler 241
11 1 1 Removal, combined radiator 241
11 1 2 Fitting, combined radiator 242
11 2 Hydraulic oil cooler 244
11 2 1 Removing the oil cooler 244
11 2 2 Fitting the oil cooler 244
11 3 Fuel cooler 245
11 3 1 Removing the fuel cooler 245
11 3 2 Fitting the fuel cooler 245
11 4 Condenser – air conditioning 246
11 4 1 Removing the condenser 246
11 4 2 Fitting the condenser 246
11 5 Rotary screen 247
11 5 1 Removing the rotary screen 247
11 5 2 Fitting the rotary screen 248
11 5 3 Adjusting the radiator cleaning plate 249
11 5 4 Reconditioning the countershaft drive 250
11 6 Dust aspirator 251
11 6 1 Removing the dust aspirator 251
11 6 2 Fitting the dust aspirator 251
11 6 3 Reconditioning the dust aspirator 252
11 7 Hydrostatic pump 253
11 7 1 Removing the hydrostatic pump 253
11 7 2 Fitting the hydrostatic pump 254
11 8 Auxiliary hydraulic pump 255
11 8 1 Removing the hydraulic pump 255
11 8 2 Fitting the hydraulic pump 255
FENDT 8380 P- 8410 P – EAME 7
D3157800M2-SN 582000001 + SIN 582400000+ SIN 583000001 + SIN 583400001
Table of contents ~ -a!s! ‘ _ ,
11 9 Hydraulic oil tank 256
11 9 1 Removing the hydraulic oil tank 256
11 9 2 Fitting the hydraulic oil tank 256
11 10 Fuel tank 257
11 10 1 Removing the fuel tank 257
11 10 2 Fitting the fuel tank 258
11 10 3 Tank gauge 258
11 11 SCR system 259
11 11 1 Removing the DEF tank 259
11 11 2 Fitting the DEF tank 259
11 11 3 Removing the DEF catalytic converter 260
11 11 4 Fitting the DEF catalytic converter 261
11 11 5 Supply module 261
11 11 6 Dosing module 262
11 11 7 Tank sensor, DEF 262
11 12 Compressor – air conditioning 263
11 12 1 Removing the A/C compressor 263
11 12 2 Fitting the A/C compressor 263
11 13 Power take-off 264
11 13 1 Removing the power take-off 264
11 13 2 Fitting the power take-off 266
11 13 3 Replacing the clutch 266
11 13 4 Replacing the output shaft/bearings 267
12 Transmissions 269
12 1 General 271
12 1 1 Transmissions, General 271
12 2 Countershaft 272
12 2 1 Removing the countershaft 272
12 2 2 Fitting the countershaft 274
12 2 3 Replacing the bearings 274
12 3 Replacing the belts, right-hand side 275
12 3 1 Elevator countershaft – hydraulic engine, reversing 275
12 3 2 Rear beater – counter drive, cylinder variator 276
12 3 3 Counter drive, variator – threshing cylinder 276
12 3 4 Rear beater – rotary separator 277
12 3 5 Rear beater – fanning mill variator 278
12 3 6 Fanning mill variator – fanning mill 279
12 3 7 Countershaft – dust aspirator, rotary screen counter drive 280
12 3 8 Countershaft – countershaft 280
12 3 9 Countershaft – tank filling elevator, tank filling auger 281
12 3 10 Countershaft – returns augers 281
12 3 11 Rotary screen counter drive – rotary screen 282
12 4 Replacing the chains, right-hand side 283
12 4 1 Reel drive 283
12 5 Replacing the belts, left-hand side 284
12 5 1 Table countershaft- knife drive 284
12 5 2 PTO shaft – table countershaft 284
12 5 3 Counter pulley – elevator countershaft 285
12 5 4 Rear beater – elevator chain top shaft – idler gear 286
12 5 5 Countershaft – rear beater 287
12 5 6 Engine – countershaft 288
12 5 7 Engine – unloading auger counter drive 1 290
12 5 8 Unloading auger counter drive 1 – unloading auger counter drive 2 292
12 5 9 Countershaft – counter drive, straw chopper 293
12 5 10 Counter drive, straw chopper – straw chopper 293
12 5 11 Rear beater – countershaft, shaker shoe drive 294
12 5 12 Countershaft, shaker shoe drive – eccentric shaft 294
12 5 13 Countershaft, shaker shoe drive – straw walker crank 295
12 5 14 Countershaft – hydraulic pump, chaff spreader 295
12 5 15 Engine – hydrostatic pump 296
8 FENDT 8380 P- 8410 P – EAME
D3157800M2- SN 582000001 + SIN 582400000+ SIN 583000001 + SIN 583400001
Table of contents
12 6 Replacing the chains, left-hand side 297
12 6 1 Table countershaft – table auger 297
12 6 2 Table auger – belt rollers (PowerFlow) 297
12 6 3 Unloading auger counter drive 2 – bottom auger 298
13 Undercarriage 299
13 1 Auto Level final drive bracket 301
13 1 1 Removal 301
13 1 2 Assembly 302
13 1 3 Replacing the bushing 304
13 1 4 Replacing the hydraulic cylinder 305
13 1 5 Reconditioning of hydraulic cylinder 305
13 1 6 Adjusting the Auto Level potentiometer 306
13 2 Final drives 308
13 2 1 Removal 308
13 2 2 Assembly 309
13 2 3 Reconditioning the final drives 310
13 3 Gearbox 314
13 3 1 Removal 314
13 3 2 Assembly 315
13 3 3 Replacing the shifter cylinders and sensor 316
13 3 4 Adjusting the shifter cylinders and sensor 317
13 3 5 Replacing the lubrication pump 320
13 3 6 Replacing the shifter forks 321
13 3 7 Reconditioning the differential 322
13 3 8 Reconditioning the gearbox 325
13 4 Hydrostatic motor 329
13 4 1 Removal 329
13 4 2 Assembly 329
13 5 Brakes 331
13 5 1 Replacing the brake blocks 331
13 5 2 Replacing the brake discs 332
13 5 3 Bleeding the brakes 334
13 5 4 Replacing the parking brake shoes 334
13 5 5 Adjustment of hydraulic parking brake 335
14 Hydraulics 337
14 1 General 339
14 1 1 Hydraulics, general 339
14 1 2 Emptying and filling the hydrostatic system 339
14 1 3 Running in and bleeding the hydrostatic system 2WD 341
14 1 4 Running in and bleeding the hydrostatic system 4WD 343
14 1 5 Running in and bleeding the auxiliary hydraulics 345
14 2 Hydraulic diagrams 346
14 2 1 Standard Combines 346
14 2 2 Auto Level machines 354
14 3 Hydraulic components 364
14 3 1 Hydraulic valves 364
14 3 2 Hydraulic pumps 373
14 3 3 Hydraulic motors 379
14 4 Hydrostatic system 381
14 4 1 Transmission hydraulics 2WD 381
14 5 Gearshift 382
14 5 1 Gearshift 382
14 6 Parking brake 384
14 6 1 Parking brake 384
14 7 Auxiliary hydraulics 385
14 7 1 Auxiliary hydraulics, oil tank and oil cooler 385
14 8 Cutting table 387
14 8 1 Cutting table – hydraulics 387
14 9 Auto Level 390
14 9 1 Auto Level – hydraulics 390
FENDT 8380 P- 8410 P – EAME 9
D3157800M2-SN 582000001 + SIN 582400000+ SIN 583000001 + SIN 583400001
Table of contents ~ -a!s! ‘ _ ,
14 10 Reel 392
14 10 1 Steering – hydraulics 392
14 11 Steering 395
14 11 1 Steering – hydraulics 395
14 12 Cutting table clutch 397
14 12 1 Cutting table engagement – hydraulics 397
14 13 Cylinder variator 398
14 13 1 Cylinder variator – hydraulics 398
14 14 Threshing unit 400
14 14 1 Threshing mechanism on/off – hydraulics 400
14 15 Unloading auger 401
14 15 1 Unloading auger out/in – hydraulics 401
14 15 2 Unloading auger on/off – hydraulics 403
14 16 Reversing 404
14 16 1 Reversing – hydraulics 404
14 17 Chaff spreader 406
14 17 1 Chaff spreader- hydraulics 406
15 Electrical system 407
15 1 General 409
15 1 1 Electrical system, general 409
15 2 Description of VarioDoc 410
15 2 1 Description of VarioDoc 410
15 3 CAN connections 411
15 3 1 CAN connections 411
15 4 Failure codes 414
15 4 1 Machine-related error codes 414
15 4 2 Engine-related error codes 423
15 5 Relays and fuses 449
15 5 1 Relays and fuses 449
15 6 Connectors 455
15 6 1 Front electric box 455
15 6 2 Rear electric box 457
15 7 Diagrams overview 460
15 7 1 Diagrams overview 460
15 8 Wiring diagrams 465
15 8 1 Electric diagrams, Standard Combine 465
15 8 2 Electric diagrams Auto Level machine 501
15 9 Components 536
15 9 1 Components 536
16 Straw chopper 595
16 1 General 597
16 1 1 Replacing and calibrating the electric actuator – straw deflectors 597
17 General assembly instructions 599
17 1 Fitting gib-head keys 601
17 1 1 Fitting gib-head keys 601
17 2 Fitting tightening pins 602
17 2 1 Fitting tightening pins 602
17 3 Fitting hydraulic pipes and screw connections 603
17 3 1 Fitting hydraulic pipes and screw connections 603
17 4 Fitting a flanged bearing with locking collar 605
17 4 1 Fitting a flanged bearing with locking collar 605
17 5 Fitting sliding bushings 606
17 5 1 Fitting sliding bushings 606
17 6 Removing the revolution sensor 607
17 6 1 Removing the revolution sensor 607
17 7 Fitting tightening rings 608
17 7 1 Fitting tightening rings 608
10 FENDT 8380 P- 8410 P – EAME
D3157800M2- SN 582000001 + SIN 582400000+ SIN 583000001 + SIN 583400001
Table of contents
18 Miscellaneous data 609
18 1 General 611
18 1 1 Miscellaneous data, general 611
18 2 Speeds – adjustment values 612
18 2 1 Speeds – adjustment values 612
18 3 Maintenance 613
18 3 1 Lubrication chart, intervals 613
18 3 2 Lubrication chart, right- and left-hand sides 616
18 3 3 Lubrication chart, front axles 619
18 3 4 Lubrication points, left-hand machine side 620
18 3 5 Lubrication points, right-hand machine side 636
18 3 6 Lubricants and operating fluids 646
18 3 7 Gear 647
1 1 Using the manual 15
1 1 1 Usingthemanual 15
1 2 General specifications 16
1 2 1 Dimensions and specifications 16
1 2 2 Specification table for tyres with equipment 25
1 3 Safety precautions 28
1 3 1 Safety precautions 28
1 3 2 Safety in the workshop 28
1 3 3 Safety – a word to the mechanic 28
1 3 4 Safety – danger, warning and caution 28
1 3 5 Safety decals 29
1 3 6 General 29
1 3 7 Personal safety 29
1 3 8 Considerations with regard to equipment 30
1 3 9 General considerations 31
1 3 10 Operational considerations 31
1 3 11 Maintenance techniques 32
1 4 Practical advice 34
1 4 1 Practical advice 34
1 5 Start-up instructions 38
1 5 1 General 38
1 5 2 Pre-delivery checks 38
1 5 3 Instruction of combine operator 39
1 6 Conversion tables 43
1 6 1 Conventional units of measurement 43
1 7 Locking and sealing agents 44
1 7 1 Locking and sealing agents 44
1 8 Wheel nut torques 45
1 8 1 Wheels 45
1 8 2 Bolts with metric threads 45
1 8 3 Nuts with metric threads 46
IMAGES PREVIEW OF THE MANUAL:
VIDEO PREVIEW OF THE MANUAL:
PLEASE NOTE:
- This is the same manual used by the DEALERSHIPS to SERVICE your vehicle.
- The manual can be all yours – Once payment is complete, you will be taken to the download page from where you can download the manual. All in 2-5 minutes time!!
- Need any other service / repair / parts manual, please feel free to contact us at heydownloadss @gmail.com . We may surprise you with a nice offer
S.M