FENDT NA Harvesting 8370 P 8370 PAL 8400 P 8400 PAL Combines Series WORKSHOP SERVICE MANUAL
DESCRIPTION:
FENDT NA Harvesting 8370 P 8370 PAL 8400 P 8400 PAL Combines Series WORKSHOP SERVICE MANUAL – PDF DOWNLOAD
1.1 Using the manual
1.1.1 Using the manual
General
All operations described in this manual relating to repairs and maintenance must only be carried out by trained service personnel. The purpose of the manual is to help dealers and workshops start up, service and repair AGCO’s equipment as efficiently and effectively as possible. If the specified procedures are followed and the recommended special tools used where necessary, jobs can be completed within the time indicated in the “Repair Time Schedule” manual.
Pagination
Example: see §3. 7 .3, page 83
This manual is divided into chapters and sections. In the example the figures show:
First figure = Chapter
Second figure = Section
Third figure = Consecutive number in the section in question
69 = Page number in manual
The publication number and version appear at the bottom of the page
Use
To make it easier to look things up, there is a table of contents at the beginning of every chapter listing the various sections in the chapter.
Modifications
Modified pages have the same section numbering as their predecessors: Only the page number and version number change. The old pages must be destroyed.
Service tools
In the case of jobs that require service tools, the number of the tool is specified at the point in the text where it is needed.
1.4.6 General
- Nearly all maintenance work involves having to drive the combine. The operator’s manual supplied with all combines or implements contains detailed safety precautions with regard to driving, operation and mainte- nance.
- These precautions apply to both the mechanic and driver/user and should be read, understood and practised by all personnel. Before starting maintenance, repair, inspection, dismantling or assembly, whether in a workshop or ”in the field”,
- think about the factors that might affect safety, not just for the mechanic doing the work, but also for any onlookers. You must NOT allow children or onlookers to stand around or on the machine while you are adjusting, inspecting, repairing or driving it.
TABLE OF CONTENTS:
FENDT NA Harvesting 8370 P 8370 PAL 8400 P 8400 PAL Combines Series WORKSHOP SERVICE MANUAL – PDF DOWNLOAD
1 Introduction – Specifications 13
1 1 Using the manual 15
1 1 1 Using the manual 15
1 2 General specifications 16
1 2 1 General specifications 16
1 2 2 Tyre pressure 19
1 3 Dimensions and weight 21
1 3 1 Dimensions and weight 21
1 4 Safety precautions 23
1 4 1 Safety precautions 23
1 4 2 Safety in the workshop 23
1 4 3 Safety – a word to the mechanic 23
1 4 4 Safety- danger, warning and caution 23
1 4 5 Safety decals 24
1 4 6 General 24
1 4 7 Personal safety 24
1 4 8 Considerations with regard to equipment 25
1 4 9 General considerations 26
1 4 10 Operational considerations 26
1 4 11 Maintenance techniques 27
1 5 Practical advice 29
1 5 1 Practical advice 29
1 6 Start-up instructions 33
1 6 1 General 33
1 6 2 Pre-delivery checks 33
1 6 3 Instruction of combine operator 35
1 7 Conversion tables 38
1 7 1 Conventional units of measurement 38
1 8 Locking and sealing agents 39
1 8 1 Locking and sealing agents 39
1 9 Wheel nut torques 40
1 9 1 Wheels 40
1 9 2 Bolts with metric threads 40
1 9 3 Nuts with metric threads 41
2 Cutting table 43
2 1 General 45
2 1 1 Cutting table, general 45
2 2 Knife drive – wobble box 46
2 2 1 Removal 46
2 2 2 Assembly 46
2 2 3 Reconditioning the wobble box 47
2 2 4 Positioning the double fingers, knife and crop lifters 53
2 3 Table auger 54
2 3 1 Removal 54
2 3 2 Assembly 55
2 3 3 Replacing the shaft on the right-hand side 55
2 3 4 Replacing the shaft on the left-hand side 56
2 3 5 Replacing the crankshaft 57
2 3 6 Replacing the feathering fingers, bearings and bushes 58
2 3 7 Adjusting the table auger and feathering fingers 59
FENDT 8370 P – 8400 P – EAME 3
D3151800M4
Table of contents
2 4 Table body 60
2 4 1 Adjusting the cut-off strips 60
2 4 2 Adjusting and positioning the ground sensor – PowerFlow 61
2 5 Slip clutch and chain drive 63
2 5 1 Removal 63
2 5 2 Assembly 63
2 5 3 Replacing the bearings and sprockets 64
2 6 Countershaft 65
2 6 1 Removal 65
2 6 2 Assembly 66
2 7 PowerFlow table 67
2 7 1 PowerFlowTable 67
2 7 2 Removal, belts 67
2 7 3 Assembly, belts 70
2 7 4 Replacing the front rollers and bearings, scraper adjustment 71
2 7 5 Replacing the rear rollers and bearings, scraper adjustment 73
2 7 6 Replacing and aligning the bearing housing, rear rollers 74
2 7 7 Belt tensioning and running-in 75
3 Reel 79
3 1 Reel 81
3 1 1 Removal 81
3 1 2 Assembly 82
3 1 3 Replacing the reel tine bar and plastic bearings 83
3 1 4 Replacing the guide rollers, eccentric, guide ring and bearings 84
3 1 5 Replacing the reel plates 85
3 1 6 Replacing the reel tube, bearings 85
3 2 Oil motor and chain drive 86
3 2 1 Replacing the oil motor 86
3 2 2 Replacing the flow divider 86
3 3 Hydraulic cylinders 90
3 3 1 Replacing the cylinder – reel up/down 90
3 3 2 Replacement of cylinder – reel forward/back 91
3 3 3 Reconditioning of hydraulic cylinders 91
4 Main crop elevator 95
4 1 General 97
4 1 1 Main crop elevator, general 97
4 2 Main crop elevator 98
4 2 1 Removal 98
4 2 2 Assembly 99
4 2 3 Bearing block on machine frame 100
4 2 4 Replacement of lifting ram 100
4 2 5 Reconditioning of hydraulic cylinder 100
4 2 6 Replacing the cutting height preset sensor 101
4 3 Crop elevator chain 103
4 3 1 Crop elevator chain, general 103
4 3 2 Removal 103
4 3 3 Assembly 103
4 3 4 Replacement of slats 105
4 3 5 Replacing the slide rails in the crop elevator 105
4 3 6 Replacing the intermediate plate 106
4 4 Elevator chain top shaft 107
4 4 1 Removal 107
4 4 2 Assembly 108
4 4 3 Replacing the bearings 108
4 4 4 Replacing the sprockets 108
4 4 5 Replacing the shaft protection tube 110
4 5 Elevator chain front shaft 111
4 5 1 Removal 111
4 5 2 Assembly 111
4 5 3 Replacing the shaft, bearings and plate wheels 112
4 FENDT 8370 P – 8400 P – EAME
D3151800M4
Table of contents
4 6 Elevator countershaft 113
4 6 1 Removal 113
4 6 2 Assembly 114
4 6 3 Replacing the bearings, belt pulley 114
4 7 Table clutch and chain drive 115
4 7 1 Removal 115
4 7 2 Assembly 115
4 7 3 Reconditioning the clutch 116
4 8 Adapter 117
4 8 1 Removal 117
4 8 2 Assembly 118
4 8 3 Replacing the cylinder/connecting rod 118
4 8 4 Reconditioning of hydraulic cylinder 118
4 8 5 Replacing the angle sensor 119
4 9 Hydraulic reversing 120
4 9 1 Removal 120
4 9 2 Assembly 120
5 Threshing unit 121
5 1 General 123
5 1 1 Threshing unit, general 123
5 2 Stone trap 124
5 2 1 Removal 124
5 2 2 Assembly 125
5 3 Concave 126
5 3 1 Removal 126
5 3 2 Assembly 127
5 3 3 Adjusting the concave laterally 127
5 3 4 Concave setting – initial setting 128
5 3 5 Replacing the actuator 128
5 3 6 Replacing the lead-in plate 129
5 3 7 Replacing the shaft for concave setting 130
5 4 Threshing cylinder 131
5 4 1 Removal 131
5 4 2 Assembly 132
5 4 3 Replacing the bearings 133
5 4 4 Replacing the rasp bars and backing bars 134
5 4 5 Replacing the shaft and cylinder spiders 134
5 5 Cylinder variator – table clutch 136
5 5 1 Removal, hydraulic variator 136
5 5 2 Assembly, hydraulic variator 137
5 5 3 Reconditioning the hydraulic variator pulley 137
5 5 4 Removal, mechanical variator 139
5 5 5 Assembly, mechanical variator 139
5 5 6 Reconditioning the mechanical variator pulley 140
5 5 7 Removal, magnetic clutch 141
5 5 8 Assembly, magnetic clutch 142
5 5 9 Reconditioning the magnetic clutch 143
5 6 Bracket for counter drive 146
5 6 1 Removal 146
5 6 2 Assembly and alignment 146
5 7 Rear beater 148
5 7 1 Removal 148
5 7 2 Assembly 149
5 7 3 Replacing the bearings 150
5 8 Rear beater concave 151
5 8 1 Removal 151
5 8 2 Assembly 151
5 9 Rotary separator cylinder 152
5 9 1 Removal 152
5 9 2 Assembly 153
5 9 3 Replacing the bearings 154
FENDT 8370 P – 8400 P – EAME 5
D3151800M4
Table of contents
5 9 4 Replacing the rasp bars 155
5 10 Rotary separator concave 1 56
5 10 1 Removal 156
5 10 2 Assembly 157
5 10 3 Concave setting – initial setting 158
5 10 4 Replacing the shaft for concave setting 159
6 Straw walkers 161
6 1 General 163
6 1 1 Straw walkers, general 163
6 2 Straw walkers 164
6 2 1 Removal 164
6 2 2 Assembly 164
6 3 Crank – front 166
6 3 1 Removal 166
6 3 2 Fitting 167
6 3 3 Replacing the bearings 167
6 4 Crank – rear 169
6 4 1 Removal 169
6 4 2 Fitting 169
6 4 3 Replacing the bearings 169
7 Shaker shoe – Fanning mill 171
7 1 General 173
7 1 1 Shaker shoe – fanning mill, general 173
7 2 Fanning mill 174
7 2 1 Removal 174
7 2 2 Assembly 175
7 2 3 Replacing the fan blades 175
7 2 4 Replacing the fanning mill deflectors 176
7 2 5 Replacement of seals 177
7 3 Main grain pan frame 178
7 3 1 General 178
7 3 2 Removal 178
7 3 3 Assembly 179
7 3 4 Replacing the swivel arm and bearings 180
7 3 5 Replacing the seals 181
7 4 Second grain pan 182
7 4 1 Removal 182
7 4 2 Assembly 182
7 4 3 Replacing the swivel arm and bearings 183
7 4 4 Adjusting second grain pan 184
7 5 Top shaker shoe 186
7 5 1 Removal 186
7 5 2 Assembly 187
7 5 3 Replacing the swivel arm and bearings 188
7 5 4 Replacement of seals 189
7 5 5 Replacing and calibrating the actuator – sieves 189
7 6 Bottom shaker shoe 191
7 6 1 Removal 191
7 6 2 Assembly 192
7 6 3 Replacing the swivel arm and bearings 193
7 6 4 Replacing the seals 193
7 6 5 Electric sieve setting – initial setting 193
7 7 Bottom augers 194
7 7 1 Bottom augers 194
7 7 2 Removal 194
7 7 3 Assembly 195
7 8 Eccentric drive 196
7 8 1 Removal 196
7 8 2 Assembly 197
7 8 3 Adjusting the connecting rod/ aligning the shaker shoes 198
6 FENDT 8370 P – 8400 P – EAME
D3151800M4
Table of contents
7 8 4 Replacing the connecting rod bearing 199
7 8 5 Replacing the bearings and eccentric shaft 200
7 9 Transmissions 201
7 9 1 Replacing and reconditioning the fanning mill variator 201
7 9 2 Adjusting the fanning mill variator 202
7 9 3 Replacing and reconditioning the counter drive 203
8 Elevators 205
8 1 Tank filling elevator 207
8 1 1 Removal 207
8 1 2 Assembly 208
8 1 3 Replacing the top shaft, bearings and sprockets 209
8 1 4 Replacement of bottom sprocket 210
8 1 5 Replacing the elevator chain 210
8 1 6 Moisture sensor 211
8 1 7 Yieldmeter sensor 211
8 2 Returns elevator 212
8 2 1 Removal 212
8 2 2 Assembly 213
8 2 3 Replacing the top shaft, bearings and sprockets 213
8 2 4 Replacing the bottom sprocket 214
8 2 5 Replacing the elevator chain 214
8 2 6 Returns volume sensor 214
8 3 Returns thresher 21 5
8 3 1 Removal 215
8 3 2 Fitting 215
8 3 3 Replacing the sprockets 215
8 3 4 Replacement of threshing cylinder 216
8 3 5 Reconditioning the right-angle gear 216
8 4 Tank filling auger 219
8 4 1 Removal 219
8 4 2 Fitting 219
8 4 3 Replacing the top bearing 219
8 4 4 Reconditioning the right-angle gear 220
8 5 Transmission 221
8 5 1 Replacing the shaft, bearings and sprockets 221
9 Engine 223
9 1 General 225
9 1 1 Engine, general 225
9 2 Replacing the engine 226
9 2 1 Removing the engine assembly 226
9 2 2 Fitting the engine assembly 228
10 Unloading auger – Grain tank 231
10 1 Unloading auger – horizontal 233
10 1 1 Removal 233
10 1 2 Assembly 233
10 2 Unloading auger – vertical 235
10 2 1 Removal 235
10 2 2 Assembly 235
10 2 3 Reconditioning the right-angle gear 236
10 3 Unloading tube – horizontal 237
10 3 1 Removal 237
10 3 2 Assembly 237
10 4 Unloading tube – vertical 238
10 4 1 Removal 238
10 4 2 Assembly 238
10 4 3 Replacing the swivel bearing 239
10 4 4 Replacing the hydraulic cylinder 240
10 4 5 Reconditioning of hydraulic cylinder 240
FENDT 8370 P – 8400 P – EAME 7
D3151800M4
Table of contents
10 5 Unloading tube elbow 241
10 5 1 Removal 241
10 5 2 Assembly 241
10 5 3 Reconditioning the right-angle gear 242
10 6 Bottom auger and cover plate 244
10 6 1 Removal 244
10 6 2 Fitting 245
10 6 3 Replacing the bearings, safety clutch 245
10 7 Transmission 247
10 7 1 Replacing the unloading auger shaft, bearings 247
10 7 2 Replacing and reconditioning the magnetic clutch 248
10 8 Grain tank covers 250
10 8 1 Removal 250
10 8 2 Assembly 251
11 Drive unit 253
11 1 Radiator – intercooler 255
11 1 1 Removal 255
11 1 2 Fitting 256
11 2 Oil cooler 257
11 2 1 Removal 257
11 2 2 Assembly 257
11 3 Fuel cooler 258
11 3 1 Removal 258
11 3 2 Assembly 258
11 4 Condenser – air conditioning 259
11 4 1 Removal 259
11 4 2 Assembly 259
11 5 Rotary screen 260
11 5 1 Removal 260
11 5 2 Assembly 261
11 5 3 Adjusting the rotary screen and cleaning blade 262
11 5 4 Replacing the drive shaft and clutch 263
11 6 Dust aspirator 266
11 6 1 Removal 266
11 6 2 Assembly 267
11 7 Hydrostatic pump 268
11 7 1 Removal 268
11 7 2 Assembly 270
11 7 3 Tensioning device 271
11 8 Auxiliary hydraulic pump 272
11 8 1 Removal 272
11 8 2 Fitting 272
11 9 Hydraulic pump – Maxi Spreader 273
11 9 1 Removal 273
11 9 2 Assembly 273
11 10 Hydraulic oil tank 274
11 10 1 Removal 274
11 10 2 Fitting 274
11 11 Fuel tank 275
11 11 1 Removal 275
11 11 2 Fitting 275
11 11 3 Tank gauge 275
11 12 Diesel additive and dosing equipment 276
11 12 1 Removal 276
11 12 2 Assembly 276
11 12 3 Supply module 276
11 12 4 Dosing module 277
11 12 5 Tank sensor 277
11 13 Compressor – air conditioning 278
11 13 1 Removal 278
11 13 2 Assembly 278
8 FENDT 8370 P – 8400 P – EAME
D3151800M4
Table of contents
11 14 Power take-off 279
11 14 1 Removal 279
11 14 2 Assembly 279
11 14 3 Replacing the clutch disc 280
11 14 4 Replacing the output shaft, bearing and hub 281
12 Transmissions 283
12 1 General 285
12 1 1 Transmissions, General 285
12 2 Countershaft 286
12 2 1 Removal 286
12 2 2 Assembly 288
12 2 3 Replacing the bearings 288
12 2 4 Reconditioning the safety clutch 289
12 3 Replacing the belts, right-hand side 290
12 3 1 Rear beater – counter drive, cylinder variator 290
12 3 2 Counter drive, variator – threshing cylinder 291
12 3 3 Rear beater – rotary separator 292
12 3 4 Fanning mill – fanning mill variator 292
12 3 5 Rear beater – fanning mill variator 293
12 3 6 Unloading auger shaft – unloading auger 293
12 3 7 Unloading auger shaft – rotary screen clutch 294
12 3 8 Unloading auger shaft – dust aspirator 295
12 3 9 Countershaft- counter drive, elevators 296
12 4 Replacing the chains, right-hand side 297
12 4 1 Counter drive, elevators – returns elevator 297
12 4 2 Counter drive, elevators – tank filling elevator 297
12 4 3 Counter drive, elevators – tank filling auger 298
12 4 4 Returns elevator – returns thresher 298
12 4 5 Reel drive 299
12 5 Replacing the belts, left-hand side 300
12 5 1 Countershaft – rear beater 300
12 5 2 Countershaft – counter drive, straw chopper 300
12 5 3 Counter drive – straw chopper 301
12 5 4 Engine – countershaft 301
12 5 5 Rear beater – countershaft, shaker shoe drive 303
12 5 6 Countershaft, shaker shoe drive – eccentric shaft 304
12 5 7 Countershaft, shaker shoe drive – straw walker crank 304
12 5 8 Rear beater – elevator chain top shaft/ front shaft 305
12 5 9 Engine – unloading auger shaft 307
12 5 10 Engine – hydrostatic pump 307
12 5 11 PTO shaft – table countershaft 308
12 5 12 Table countershaft – knife drive 309
12 5 13 Countershaft – hydraulic pump, chaff spreader 309
12 6 Replacing the chains, left-hand side 310
12 6 1 Table countershaft – table auger 310
12 6 2 Table auger – belt rollers (PowerFlow) 310
12 6 3 Hydraulic motor, reversing – elevator countershaft 311
12 6 4 Bottom auger – unloading auger 312
13 Undercarriage 313
13 1 Auto Level final drive bracket 315
13 1 1 Removal 315
13 1 2 Assembly 316
13 1 3 Replacing the bushing 318
13 1 4 Replacing the hydraulic cylinder 319
13 1 5 Reconditioning of hydraulic cylinder 319
13 1 6 Adjusting the Auto Level potentiometer 320
13 2 Final drives 321
13 2 1 Removal 321
13 2 2 Assembly 322
13 2 3 Reconditioning the final drives 323
FENDT 8370 P – 8400 P – EAME 9
D3151800M4
Table of contents
13 3 Gearbox 327
13 3 1 Removal 327
13 3 2 Assembly 328
13 3 3 Replacing the shifter cylinders and sensor 329
13 3 4 Adjusting the shifter cylinders and sensor 330
13 3 5 Replacing the lubrication pump 333
13 3 6 Replacing the shifter forks 334
13 3 7 Reconditioning the differential 335
13 3 8 Reconditioning the gearbox 338
13 4 Hydrostatic motor 342
13 4 1 Removal 342
13 4 2 Assembly 342
13 5 Brakes 343
13 5 1 Replacing the brake blocks 343
13 5 2 Replacement of brake discs 344
13 5 3 Bleeding the brakes 346
13 5 4 Brake pedals and main cylinder 346
13 5 5 Replacing the handbrake shoes 349
13 5 6 Adjustment of hydraulic hand brake 350
13 6 Rear axle 351
13 6 1 General 351
13 6 2 Removal 351
13 6 3 Assembly 352
13 6 4 Replacing the king pins and bushings 353
13 6 5 Replacing the steering cylinder 354
13 6 6 Reconditioning the hydraulic cylinder, rear axle 354
13 6 7 Adjusting the toe-in and steering deflection 355
14 Cab 359
14 1 Multi-function lever and control panel 361
14 1 1 Control panel 361
14 1 2 Armrest 362
14 1 3 Multi-function lever 363
14 2 Replacing the windscreen 365
14 2 1 Replacing the windscreen 365
14 3 Control panel in roof 366
14 3 1 Control panel in roof 366
14 4 Roof 367
14 4 1 Outer roof 367
14 4 2 Inspection doors 368
14 4 3 Replacing the windscreen wiper 368
14 4 4 Replacing the blower 369
14 4 5 Replacing the heating element/tap 370
14 4 6 Replacing evaporator 370
14 5 Troubleshooting – Climate control 371
14 5 1 Climate control faults in general 371
14 5 2 ECS – Electronic control unit 371
14 5 3 Troubleshooting table 371
15 Hydraulics 375
15 1 General 377
15 1 1 Hydraulics, general 377
15 1 2 Emptying and filling the hydrostatic system 379
15 1 3 Running in and bleeding the hydrostatic system 380
15 1 4 Running in and bleeding the auxiliary hydraulics 381
15 2 Hydraulic diagrams 382
15 2 1 Hydraulic diagrams 382
15 3 Hydrostatic system 385
15 3 1 Hydrostatic system 385
15 4 Gearshift 387
15 4 1 Gearshift 387
10 FENDT 8370 P- 8400 P – EAME
D3151800M4
Table of contents
15 5 Handbrake 388
15 5 1 Hand brake 388
15 6 Auxiliary hydraulics 389
15 6 1 Auxiliary hydraulics 389
15 7 Cutting table 391
15 7 1 Cutting table 391
15 8 Auto Level 394
15 8 1 Auto Level – hydraulic cylinders 394
15 9 Reel 395
15 9 1 Reel 395
15 10 Steering 398
15 10 1 Steering – hydraulics 398
15 11 Cylinder variator 399
15 11 1 Cylinder variator – hydraulics 399
15 12 Unloading auger 400
15 12 1 Unloading auger – hydraulics 400
15 13 Reversing 401
15 13 1 Reversing – hydraulics 401
15 14 Chaff spreader 402
15 14 1 Chaff spreader – hydraulics 402
15 15 Maxi Spreader 403
15 15 1 Maxi Spreader – hydraulics 403
15 16 Troubleshooting – hydrostatic transmission 405
15 16 1 Hydrostatic transmission faults in general 405
15 16 2 Pump and motor specifications 405
15 16 3 Functional diagram, HPV pump – HMF motor 406
15 16 4 Connecting test equipment 408
15 16 5 Troubleshooting table 409
15 16 6 Checking the charge pump 410
15 16 7 Checking the high pressure valves 410
15 16 8 Checkingthecoldstartvalve 410
15 16 9 Checking the servo control 411
15 16 10 Checking the hydraulic pump 412
15 16 11 Checking the hydraulic motor 413
16 Electrical system 415
16 1 General 417
16 1 1 Electrical system, general 417
16 2 Description of FIELDST AR 418
16 2 1 Description of FIELDSTAR 418
16 3 Electric box 419
16 3 1 Replacing the terminal 419
16 3 2 Replacing the job computers 419
16 4 Calibrations 422
16 4 1 Speed calibration 422
16 4 2 Calibrating the concave 422
16 4 3 Shaft alarm calibration 422
16 4 4 Calibrating the electrical sieves 423
16 4 5 Calibrating the electrical straw deflectors 423
16 4 6 Calibrating the Auto Level combine 423
16 4 7 Table calibration 424
16 5 Diagrams overview 426
16 5 1 Diagrams overview 426
16 6 Wiring diagrams 430
16 6 1 Wiring diagrams 430
16 7 Diagrams – computer input/output 444
16 7 1 Diagrams input/output 444
16 8 Diagramme ECU sensor connections 448
16 8 1 Diagramme ECU sensor connections, Stage 38 engine, 6 cylinders 448
16 9 Connectors 450
16 9 1 Connectors 450
FENDT 8370 P – 8400 P – EAME 11
D3151800M4
Table of contents
16 10 W-connecting points 457
16 10 1 W-connecting points 457
16 11 Components 458
16 11 1 Components 458
16 12 Key to symbols 526
16 12 1 Key to symbols 526
16 13 Wiring overview 527
16 13 1 Wiring overview 527
17 Straw chopper 573
17 1 General 575
17 1 1 Replacing and calibrating the electric actuator – straw deflectors 575
18 General assembly instructions 577
18 1 Fitting gib-head keys 579
18 1 1 Fitting gib-head keys 579
18 2 Fitting tightening pins 580
18 2 1 Fitting tightening pins 580
18 3 Fitting hydraulic pipes and screw connections 581
18 3 1 Fitting hydraulic pipes and screw connections 581
18 4 Fitting a flanged bearing with locking collar 583
18 4 1 Fitting a flanged bearing with locking collar 583
18 5 Fitting sliding bushings 584
18 5 1 Fitting sliding bushings 584
18 6 Removing the revolution sensor 585
18 6 1 Removing the revolution sensor 585
18 7 Fitting tightening rings 586
18 7 1 Fitting tightening rings 586
19 Miscellaneous data 587
19 1 General 589
19 1 1 Miscellaneous data, general 589
19 2 Speeds – adjustment values 590
19 2 1 Speeds – adjustment values 590
19 3 Maintenance 591
19 3 1 Lubrication chart, intervals 591
19 3 2 Lubrication chart, right- and left-hand side 594
19 3 3 Lubrication chart, main crop elevator and front axle 596
19 3 4 Lubrication points, left-hand machine side 597
19 3 5 Lubrication points, right-hand machine side 611
19 3 6 Recommended lubricants 622
19 3 7 Gear 623
19 3 8 Air-conditioning 624
1 1 Using the manual 15
1 1 1 Usingthemanual 15
1 2 General specifications 16
1 2 1 General specifications 16
1 2 2 Tyre pressure 19
1 3 Dimensions and weight 21
1 3 1 Dimensions and weight 21
1 4 Safety precautions 23
1 4 1 Safety precautions 23
1 4 2 Safety in the workshop 23
1 4 3 Safety – a word to the mechanic 23
1 4 4 Safety – danger, warning and caution 23
1 4 5 Safety decals 24
1 4 6 General 24
1 4 7 Personal safety 24
1 4 8 Considerations with regard to equipment 25
1 4 9 General considerations 26
1 4 10 Operational considerations 26
1 4 11 Maintenance techniques 27
1 5 Practical advice 29
1 5 1 Practical advice 29
1 6 Start-up instructions 33
1 6 1 General 33
1 6 2 Pre-delivery checks 33
1 6 3 Instruction of combine operator 35
1 7 Conversion tables 38
1 7 1 Conventional units of measurement 38
1 8 Locking and sealing agents 39
1 8 1 Locking and sealing agents 39
1 9 Wheel nut torques 40
1 9 1 Wheels 40
1 9 2 Bolts with metric threads 40
1 9 3 Nuts with metric threads 41
FENDT
IMAGES PREVIEW OF THE MANUAL:
VIDEO PREVIEW OF THE MANUAL:
PLEASE NOTE:
- This is not a physical manual but a digital manual – meaning no physical copy will be couriered to you. The manual can be yours in the next 2 mins as once you make the payment, you will be directed to the download page IMMEDIATELY.
- This is the same manual used by the dealers inorder to diagnose your vehicle of its faults.
- Require some other service manual or have any queries: please WRITE to us at [email protected]
S.M