FENDT Katana 65 Maintenance Operator’s Manual – PDF DOWNLOAD
DESCRIPTION:
FENDT Katana 65 Maintenance Operator’s Manual – PDF DOWNLOAD
1.1 Introduction
1.1.1 Safety instructions: Introduction
Operator’s Manual
NOTE:
- This Operator’s Manual is published and distributed across various markets. The availability of the components referred to – whether as part of the standard equipment or as an accessory – can vary depending on the country or region concerned. If you would like to know what equipment features are available in your region, you should
- contact your FENDT dealer. Under normal conditions, this Operator’s Manual should enable the owner and operator to operate the forage harvester safely. If these instructions are followed, the forage harvester, like all FENDT products, will provide faithful service for many years. The FENDT dealer’s commissioning at the operator’s
- site ensures that you understand both the operating and service instructions. You should contact your FENDT dealer if you do not understand any parts of this Operator’s Manual. It is essential that these instructions are understood and observed. The instructions do not contain all of the safety and operating instructions for the
- attachments and accessories that can be fitted at the time of delivery and after delivery of the forage harvester. It is imperative that the operator understands and uses the Operator’s Manual relative to these attachments and the accessories.
IMPORTANT:
- This manual must always be kept in the forage harvester. You can obtain a copy of this Operator’s Manual from your FENDT dealer. This chapter of the Operator’s Manual contains a description of specific safety-related standard situations that can
- arise when operating the forage harvester and during normal maintenance. You are also given all of the information required on the correct behavior to adopt in these situations. This chapter is supplementary to the safety instructions
- contained in other chapters of this Operator’s Manual. Depending on the attachments used and the working conditions on-site or in the maintenance area, additional precautionary measures may need to be taken. FENDT has no direct influence on the commissioning, operation, inspection, lubrication or maintenance of the forage harvester. YOU are therefore responsible for the adoption of appropriate safety measures in the areas concerned.
TABLE OF CONTENTS:
FENDT Katana 65 Maintenance Operator’s Manual – PDF DOWNLOAD
1 Safety instructions 9
11 Introduction 11
111 Safety instructions: Introduction 11
2 Service and maintenance 13
21 General 15
211 General notes on maintenance 15
22 Trims 17
221 Unlock and open engine cover 17
222 Unlock and open panels on the left and right 17
223 Unlock and close panels on the left and right 18
224 Unlock and open service area door 18
23 Feed system 19
231 Remove intake assembly 19
232 Disconnect intake assembly from forage harvester 21
233 Attach intake assembly 23
24 Cutting unit 25
241 Cutting cylinder bearing mounting wedges 25
242 Replace knives 25
2421 Remove knives 25
2422 Install knives 27
243 Adjust knives 30
2431 Remove knives 30
2432 Install knives 31
244 Drum modification to half number of knives 33
2441 Remove knives 33
2442 Install cover plates 34
245 Adjust drum base 36
25 Grinding device 38
251 Replace or readjust grindstone 38
26 Engine 41
261 Engine oil 41
2611 Check engine oil level 41
2612 Fill with engine oil 42
2613 Drain the engine oil 42
2614 Change the engine oil filter 42
262 Cooling system 43
2621 Check cooling and heating system 43
2622 Check the coolant level 44
2623 Re-fill with coolant 45
2624 Drain coolant 45
263 Fuel system 46
2631 Change the fuel filter 46
2632 Change the fuel pre-filter 47
2633 Drain the fuel pre-filter 48
264 Dry air filter 49
2641 Remove and fit the dry air filter 49
265 V-belt 49
2651 Check engine poly-V belt 49
27 Gearbox 51
271 Check oil level in main transmission 51
Table of contents
Maintenance
650020020016
272 Fill main transmission with oil 51
273 Drain main transmission oil 51
274 Replace main transmission intake filter 52
28 Rear axle and flange gearbox 53
281 Check oil level of flange gearbox and unsuspended rear axle 53
2811 Check oil level of flange gearbox 53
2812 Check oil level of rear axle 53
282 Top up oil in flange gearbox and unsuspended rear axle 54
2821 Refill oil in flange gearbox 54
2822 Filling rear axle with oil 54
283 Drain oil from flange gearbox and rear axle 55
29 Wheel drive 56
291 Check oil level of wheel gear at front and rear axle 56
292 Oil change for front and rear wheel gears 56
210 Hydraulics 58
2101 Check the hydraulic oil level at the sight glass 58
2102 Drain hydraulic oil 58
2103 Replace suction line filter 59
2104 Clean high-pressure filter 60
21041 Remove the high-pressure filter 60
21042 Disassemble the high-pressure filter 61
21043 Install the high-pressure filter 62
211 Belt drives 63
2111 Check drive belts 63
2112 Check cracker drive belt 63
2113 Check and adjust fan drive belt 64
21131 Visual inspection of fan belt 64
21132 Check belt tension 64
21133 Adjust belt tension 65
212 Wheels/tires 66
2121 Check and maintain tires 66
2122 Tire pressures 67
2123 Change wheels 70
213 Electrical system 72
2131 Interference with electrical system and troubleshooting 72
2132 Batteries 72
2133 Electric welding 73
2134 Fuse holder and fuse assignment 73
2135 Xenon work lights (optional) 76
2136 Installation of additional electrical and electronic equipment 77
214 Compressed air system 78
2141 Replace the air dryer cartridge 78
215 Air-conditioning system 79
2151 Clean air conditioning condenser 79
216 Central lubrication 80
2161 Filling 80
21611 Fill the pump with a commercially available grease gun 80
21612 Fill using filling station or filling gun 80
217 Cleaning 81
2171 Cleaning the machine 81
2172 Clean the terminal 82
3 Faults and remedy 83
31 Information and fault messages 85
311 Information and fault messages in the terminal 85
32 Fault code tables 87
Table of contents
Maintenance
650020020016
321 Fault code 01xxx 87
322 Fault code 02100 89
323 Fault code 03100 95
324 Fault code 04100 96
325 Fault code 05100 108
326 Fault code 06100 110
327 Fault code 07100 111
328 Fault code 08100 116
329 Fault code 09100 121
3210 Fault code 0A100 121
3211 Fault code 0B100 138
3212 Fault code 0D100 139
3213 Fault code 0F100 140
3214 Fault code 11100 147
3215 Fault code 15100 148
3216 Fault code 16100 149
3217 Fault code 18100 149
3218 Fault code 1D100 153
3219 Fault code 1E100 182
3220 Fault code 1F100 207
3221 Fault code 20100 207
3222 Fault code 32100 209
3223 Fault code 33100 213
3224 Fault code 34100 219
3225 Fault code 35100 223
3226 Fault code 36100 226
4 Technical data 227
41 Technical data 229
411 Technical data: General 229
412 Technical data: Diesel engine 231
413 Technical data: Gearbox 232
414 Technical data: Hydraulic system 233
415 Technical data: Rear axle (without suspension) 233
416 Technical data: Rear axle (with suspension) 234
417 Technical data: Cab/air-conditioning system 234
418 Technical data: Brakes 235
419 Technical data: Electrical system 235
4110 Technical data: Feed equipment 236
4111 Technical data: Cutting unit/corn cracker 236
4112 Technical data: discharge system 237
4113 Technical data: Central lubrication 237
42 Fuels and lubricants 238
421 General 238
422 Filling quantities 238
423 AdBlue® 239
5 Lubrication and maintenance plan 243
51 Lubrication chart 245
511 Filling points 245
512 Lubrication points 249
513 Central lubrication 257
52 Maintenance schedule 260
521 Tightening torques 260
522 Maintenance schedule 262
6 Vehicle registration 271
Table of contents
Maintenance
650020020016
61 Vehicle registration on AGCO Net 273
611 Vehicle registration on AGCO Net 273
7 Index 275
Table of contents
Maintenance
IMAGES PREVIEW OF THE MANUAL:
VIDEO PREVIEW OF THE MANUAL:
PLEASE NOTE:
- This is the same manual used by the dealers to diagnose and troubleshoot your vehicle
- You will be directed to the download page as soon as the purchase is completed. The whole payment and downloading process will take anywhere between 2-5 minutes
- Need any other service / repair / parts manual, please feel free to contact [email protected] . We still have 50,000 manuals unlisted
s.m