Fendt Eu Harvesting PowerFlow 18-25 Cutting Table Operator’s Manual – PDF DOWNLOAD
DESCRIPTION:
Fendt Eu Harvesting PowerFlow 18-25 Cutting Table Operator’s Manual – PDF DOWNLOAD
1.1 Information
1.1.1 Introduction
- This Operator’s Manual should be used as a practical reference guide: It contains all the necessary practical information for the operation, adjustment and maintenance of your new cutting table. The cutting table is designed and built to ensure optimum performance, comfort and ease-of-operation in a wide variety of crops and conditions.
- The cutting table was thoroughly inspected before the delivery both at the factory and by your Dealer, to make sure you receive it in perfect condition. To keep the cutting table in perfect condition and to ensure trouble-free performance, the periodical maintenance operations listed in this manual should be carried out at the recommended intervals
Before you use or move your cutting table, read this Operator’s Manual carefully; pay particular attention to the section on safety rules. Always keep this manual on hand for further reference.
The terms “left” and “right” are always used with reference to the machine traveling direction. Should you require further information, please do not hesitate to contact your authorised Dealer. Your Dealer provides specially trained personnel, genuine spare parts and the required tools to solve any problems that may arise.\
NOTE: •
- This cutting table has been designed and built in compliance with the Machine Directive 2006/42/EC. A CE Declaration of Conformity is supplied with the machine (see specific chapter).
- This manual is published for worldwide distribution, and the availability of equipment shown as standard or optional varies according to the territory in which the combine is to be used. Specifications may differ from those contained in this Operator’s Manual according to the customer’s requirements
- In order to provide a better view of features or adjustments, certain illustrations in this manual can show the cutting table with standard guards, or the guards required by law in different countries, open or removed.
TABLE OF CONTENTS:
Fendt Eu Harvesting PowerFlow 18-25 Cutting Table Operator’s Manual – PDF DOWNLOAD
1 General Information 7
1 1 Information 9
1 1 1 Introduction 9
1 1 2 Company policy 9
1 1 3 Optional equipment 9
1 1 4 Spare parts and accessories 10
1 1 5 Warranty 10
1 1 6 Maintenance 10
1 1 7 Lubricants 11
1 1 8 Ecology 11
1 1 9 Electromagnetic emissions 11
1 2 Use 13
1 2 1 Appropriate use 13
1 3 Conformity 14
1 3 1 EC Declaration of Conformity for cutting table 14
1 4 Identification 16
1 4 1 Cutting table identification 16
1 4 2 Parts identification 17
2 Safety 19
2 1 Warning symbols and safety instructions 21
2 1 1 Warnings 21
2 2 Safety Precautions 22
2 2 1 Information 22
2 3 Information for road transport 24
2 3 1 Road Transport 24
2 4 Safe handling of the cutting table 25
2 4 1 Attachment points 25
2 5 Safety and function decals 26
2 5 1 Location of decals 26
2 5 2 Description of decals 28
3 Operation and adjustment 31
3 1 Safety 33
3 1 1 Safety Precautions 33
3 2 Cutting table operation 34
3 2 1 Operating principles 34
3 3 Cutting table engagement and disengagement 36
3 3 1 Important information 36
3 3 2 Attachment 36
3 3 3 Removal 39
3 4 Table trailer 40
3 4 1 Information 40
3 5 Cutting table levelling 41
3 5 1 System operation 41
3 5 2 Adjustment of ground sensor 41
3 6 Reel 43
3 6 1 Safety stop 43
3 6 2 Reel Adjustment 43
3 6 3
Bleeding 45
3 6 4 Rotation 45
3 6 5 Reel bars 46
3 7 Knife 47
3 7 1 Knife and knife drive housing 47
3 8 Feeding 48
3 8 1 Table Auger 48
3 8 2 Assembly and adjustment of shims (additional) 49
3 8 3 Replacement of retractable fingers 50
3 8 4 Auger flight extensions 50
3 8 5 Reversing 50
3 9 Drive trains 51
3 9 1 Information 51
3 9 2 Drive train, left-hand side 51
3 9 2 1 Auger speed reduction 51
3 9 3 Cutting table auger slip clutch 52
3 9 4 Drive train, left-hand side 52
3 9 5 Drive train, right-hand side 53
3 10 PowerFlow belts 54
3 10 1 Description 54
3 10 2 Inspection and start-up 54
3 10 3 Adjustment 55
3 10 4 Cleaning 55
3 10 5 Lower part of the cutting table 56
3 11 Scrapers 57
3 11 1 Front Scrapers 57
3 11 2 Rear scrapers 57
3 12 Crop lifter 58
3 12 1 Use 58
3 13 Vertical Knifes 59
3 13 1 Description 59
3 13 2 Assembly 60
3 14 Rape auger 61
3 14 1 Description 61
3 15 Torpedo dividers and bow dividers 62
3 15 1 Description 62
3 15 2 Assembly 62
3 15 3 Adjustment of Torpedo divider 63
3 16 Fixed auger fingers (on request) 64
3 16 1 Assembly 64
3 16 2 Use 64
3 17 Hydraulics system 65
3 17 1 Reel adjustment 65
4 Lubrication and Maintenance 67
4 1 Lubricating the 69
4 1 1 Lubrication Intervals 69
4 1 2 Lubrication points 70
4 1 3 Lubrication – left-hand side 71
4 1 4 Lubrication – right-hand side 74
4 1 5 Lubricants 75
4 2 Maintenance 77
4 2 1 Maintenance intervals 77
5 1 Operations to be carried out: 81
5 1 1 After harvest 81
5 1 2 Ordering spare parts 81
5 1 3 Before the start of each new season 81
6 Technical Specifications 83
6 1 Technical specifications 85
6 1 1 Cutting table 85
7 Index 87
1 1 Information 9
1 1 1 Introduction 9
1 1 2 Company policy 9
1 1 3 Optional equipment 9
1 1 4 Spare parts and accessories 10
1 1 5 Warranty 10
1 1 6 Maintenance 10
1 1 7 Lubricants 11
1 1 8 Ecology 11
1 1 9 Electromagnetic emissions 11
1 2 Use 13
1 2 1 Appropriate use 13
1 3 Conformity 14
1 3 1 EC Declaration of Conformity for cutting table 14
1 4 Identification 16
1 4 1 Cutting table identification 16
1 4 2 Parts identification 17
Cutting
IMAGES PREVIEW OF THE MANUAL:
VIDEO PREVIEW OF THE MANUAL:
PLEASE NOTE:
- This is the SAME manual used by the dealers to troubleshoot any faults in your vehicle. This can be yours in 2 minutes after the payment is made.
- Contact us at [email protected] should you have any queries before your purchase or that you need any other service / repair / parts operators manual.
S.M