Fassi Crane F 60A.21 Use and Maintenance Manual (SN:0775)
File Details:
Fassi Crane F 60A.21 Use and Maintenance Manual (SN:0775)
- Manual Language:English
- Page No: 90
- Format:PDF
- Size: 3.07 MB
- Downloadable:Yes
Video Preview:
Image Preview:
Description:
Fassi Crane F 60A.21 Use and Maintenance Manual (SN:0775)
- The fitment of the crane on the vehicle must be carried out in accordance with the instructions given by FASSI in the manual for hydraulic crane fitting and the relevant chassis manufacturers directives.
- The Manufacturer declines all responsibility and guarantee if the fitting is entrusted to workshops without sufficient technical capability to carry out the work in conformity.
- Be sure that the unit has been installed, inspected and tested in accordance with the local legal requirements.
- As well as the principal safety norms, this manual contains a description of the crane and the instructions for use and maintenance.
- The following instructions refer to mobile cranes in general and must be integrated with the manual for use supplied by the centre responsible for the crane fitting on truck, vehicle or other type of structure.
- Some of the options described in the use and maintenance manual are available only on request; therefore they may not be on your crane.
- READ THIS MANUAL CAREFULLY prior to use or any maintenance. A few minutes spent now could save time and labour later.
- Always conform to the safety norms and the instructions for use and maintenance contained in the present manual in order to guarantee a long life to the crane.
Table of Contents:
Fassi Crane F 60A.21 Use and Maintenance Manual (SN:0775)
1 INTRODUCTION
2 CLASSIFICATION OF THE CRANE MODEL
2.1 Generality
2.2 Hydraulic jibs (not available)
2.3 Technical data
3 CAPACITY PLATES
3.1 Generality
3.1.1 Capacity plates with load limiting device
3.1.2 Capacity plates with lifting moment limiting device (optional)
4 HYDRAULIC SCHEMATICS ( ) (version with lifting moment limiting device)
4.1 HYDRAULIC SCHEMATICS (version with load limiting device)
5 ELECTRIC SCHEMATICS
6 SAFETY NORMS
7 WARNING AND INSTRUCTIONS
7.1 Generality
7.2 Before operating
7.3 During operation
7.4 At the end of the operation (Prior to driving the vehicle)
7.5 Residual risks
8 IDENTIFICATION OF THE CRANE MODEL
8.1 Generality
8.2 Crane mark
9 CRANE NOMENCLATURE
9.1 Version with ground controls for crane and outriggers Version with top seat controls for crane by hand cables
10 NOMENCLATURE OF THE SAFETY AND PROTECTION DEVICES
10.1 Version with ground controls for crane and outriggers
Version with top seat controls for crane by hand cables
11 SUPPLEMENTARY BEAMS
11.1 Generality
11.2 Identification of the supplementary beams
12 TILTABLE OUTRIGGER RAMS
12.1 Manually tiltable outrigger rams
13 MANOEUVRES AND CONTROLS TO STABILIZE THE VEHICLE
13.1 Generality
13.2 Manual extension and re-entry of the outrigger supports
Edition ExtraCE 07.03.2006
13.3 Manoeuvres for the manual extension of the double outrigger supports
13.4 Functions of control levers for stabilization
13.5 Controls to stabilize the vehicle
14 CONTROLS TO OPERATE THE CRANE
14.1 Generality
14.2 Manoeuvres to unfold the crane into a working condition
14.3 Manoeuvres to fold the crane into the rest condition
14.4 Manoeuvres to unfold the crane “C” into a working condition (only for the crane version “C”)
14.5 Manoeuvres to fold the crane “C” into the rest condition (only for the crane version “C”)
14.6 Indicator of inner boom horizontal position (optional)
14.7 Third control station (optional)
15 MANOEUVRES OF THE CRANE LOADS (version with load limiting device)
15.1 Generality
16 MANOEUVRES OF THE CRANE LOADS (version with lifting moment limiting device)
16.1 Generality
16.2 Lifting moment limiting device “ELECTRONIC” (optional)
16.3 Control panels (optional)
16.4 Load handling (optional)
16.5 Lifting moment limiting device for two working sectors (optional)
16.6 Rotation limiting device (optional)
16.7 In the case of the appearance of the signal “ALARM” on the display of the control panel or
of the radio remote control or in case of an electrical failure (optional)
16.7.1 Diagnostic (Alarms/Input/Output) LME vers. 4-5 UC 01-7 (optional)
16.7.2 Temporary OVERIDE-Reactivation for the crane functions with standard distributor (optional)
16.7.3 OVERIDE-Reactivation lever for the crane functions (with Danfoss distributor) (optional)
16.8 XP device (if fitted, see the Use and Maintenance booklet)
16.8.1 Activation and instructions for use of the XP/V device
(if fitted, see the Use and Maintenance booklet)
17 USE OF IMPLEMENTS
17.1 Generality
17.2 Hydraulic connections for implements – supplementary hoses
17.3 Oil cooler (heat exchanger)
18 MANUAL EXTENSIONS
18.1 Generality
18.2 Lifting moment limiting device “ELECTRONIC” for the manual extensions (valid starting from the version 3.0 of the software)
19 CONTROLS TO OPERATE THE HYDRAULIC IMPLEMENTS OF THE CRANE
20 HYDRAULIC JIBS (not available)
21 WINCH (if fitted)
21.1 Generality (version with lifting moment limiting device)
21.2 Winch for crane
21.2.1 Winches equipped with a mechanical stroke end device
21.3 Generality (version with load limiting device)
21.4 Winch for crane
21.4.1 Winches equipped with a mechanical stroke end device
22 MAINTENANCE INSTRUCTIONS
22.1 Generality
22.2 Timer
22.3 After every 8 working hours or at the end of every working day
22.4 After every 40 working hours or atfter every working week
22.5 After every 100 working hours or more frequently in case of more intensive utilisation
22.6 After every 500 working hours or after every 6 working months
22.7 After every 1000 working hours or after every working year
22.8 Complete overhaul of the crane is required when 10.000 working hours or 10 years’
life are reached
22.9 Instructions for the dismantlement and the demolition of a FASSI crane
23 TABLE OF HYDRAULIC OIL AND LUBRICANTS CHA RAC TE RI STI CS
24 POSSIBLE FAULTS
24.1 Generality
24.2 Only operations which can be carried out by the user
24.3 Operations to be carried out only by a service center
25 INSTRUCTION AND WARNING PLATES
Please Note:
⦁ This is not a physical manual but a digital manual – meaning no physical copy will be couriered to you. The manual can be yours in the next 2 mins as once you make the payment, you will be directed to the download page IMMEDIATELY.
⦁ This is the same manual used by the dealers inorder to diagnose your vehicle of its faults.
⦁ Require some other service manual or have any queries: please WRITE to us at [email protected]
Jayson Larry –
Will use this sight more often