Case Wheel Loader W24B Service Manual
FILE DETAILS:
Case Wheel Loader W24B Service Manual
Size : 133 MB
Format : PDF
Language : English
Brand: Case
Number off page: 776 page
Type of machine: Case Wheel Loader
Type of document: Service Manual
Model: Case Wheel Loader W24B
Part No: 9-72398R0
TABLE OF CONTENTS:
Case Wheel Loader W24B Service Manual
SERIES – GENERAL
Maintenance and Lubrication
Torque Chart
General Engine Specifications
Detailed Engine Specifications
SERIES – ENGINE
Stall Checks Engine Removal and Installation
Air Cleaner
Engine Diagnosis
Engine Tune-Up
Cylinder Head Valve Train and Camshaft
Cylinder Block, Sleeves Pistons and Rods
Crankshaft Main Bearings Flywheel and Oil Seal
Replacement
Lubrication System
Cooling System
Turbocharger Failure Analysis
SERIES – FUEL SYSTEM
Fuel System and Filters
Robert Bosch Fuel Injection Pumps
Roosa Master Fuel Injectors
Electric Fuel Pump
SERIES – HYDRAULICS
Hydraulic Diagram, Trouble Shooting, Testing
and Adjustments
Hydraulic Pump
Loader Control Valve
Hydraulic Cylinders
SERIES – STEERING
Hydraulic Diagram Trouble Shooting and Testing
Steering Control Valve and Flow Control Valve
CenterPivot
SERIES – POWER TRAIN
Allison Powershift Transmission Service Manual
Transmission Removal and Installation and Service
Differentials and Planetaries
DriveShaftsandTrunnion
SERIES — BRAKES
Air System Operation and Diagram
Brakes and Air System Components
SERIES – ELECTRICAL
WiringDiagram
Trouble Shooting and Adjustments
Batteries
Starter, Starter Solenoid Magnetic Switches
Alternator
SERIES – MOUNTED EQUIPMENT
Loader
Rollover Protection Structure
VIDEO PREVIEW OF THE MANUAL:
IMAGES PREVIEW OF THE MANUAL:
DESCRIPTION:
Case Wheel Loader W24B Service Manual
SAMPLE PAGES FROM THE MANUAL:
RUN-IN INSTRUCTIONS:
Engine Lubrication
- When the engine rebuild is complete, fill the engine crankcase with Case HDM oil and install new engine oil filters. NOTE: If Case HDM oil is not used, use only a Series 3 DS or CD Service Classification oil that has the proper viscosity rating for prevailing air temperature. Refer to vehicle Operators Manual.
- After the first 20 hours of operation, change the engine oil while the engine is hot and replace the the engine oil filter/s. DO NOT DRAIN OIL UNTIL THE ENGINE HAS BEEN OPERATED 20 HOURS. Change the engine oil and filter/s at the recommended intervals thereafter as outlined in the Operator’s Manual.
- Run-In Procedure (Agricultural Tractors):For the first 8 hours of field operation stay one gear lower than normal. For the next 12 hours DO NOT “lug” the engine. Prevent “lugging” by shifting to a lower gear. The engine must not be “lugged” below its Rated Engine RPM during the early hours of life.
- Run-In Procedure (Construction Equipment): For the first 8 hours, operate the engine at full throttle maintaining a normal load. DO NOT baby the engine. but avoid prolonged converter or hydraulic stall. Engine must not be “lugged” below
Its Rated Engine RPM (Do not exceed 10 seconds of stall). - Run-In Procedure (Power Units):For the first 1/2 hour. operate engine at 2/3 rated RPM with a light load or no load. For the next (1) hour. run engine at 80 to 90% load at rated RPM (but not over 2000 RPM). Then full load and rated RPM as required in application.
PLEASE NOTE:
- This is the same manual used by the DEALERSHIPS to SERVICE your vehicle.
- The manual can be all yours – Once payment is complete, you will be taken to the download page from where you can download the manual. All in 2-5 minutes time!!
- Need any other service / repair / parts manual, please feel free to contact us at heydownloadss @gmail.com . We may surprise you with a nice offer