Case 1021G 1121G Tier 2 Wheel Loader Operator’s Manual 51638122 – PDF DOWNLOAD
IMAGES PREVIEW OF THE MANUAL:
DESCRIPTION:
Case 1021G 1121G Tier 2 Wheel Loader Operator’s Manual 51638122 – PDF DOWNLOAD
GENERAL INFORMATION :
Note to the owner :
- Read this manual before you start the engine or operate the machine. If you need more information, see your authorized
dealer. - This manual contains important information about the safe operation, adjustment, and maintenance of your machine.
- Refer to the index at the back of this manual for locating specific items about your machine. The wheel loader conforms
to current safety regulations at the time of its manufacture. - Consult an authorized dealer or CNH Industrial on changes, additions, or modifications that can be required for this
machine to comply with various country regulations and safety requirements. Unauthorized modifications will cause
serious injury or death. Anyone making such unauthorized modifications is responsible for the consequences. - The information in this manual is provided on the basis of information that was available at the time the manual was
written. Settings, procedures, part numbers, software and other items can change. These changes can affect the
maintenance performed on the machine. Ensure that you have complete and current information from your dealer
before you start any machine operation. - DO NOT OPERATE or permit anyone to operate or service this machine until you or the other persons have read and
understand the safety, operation and maintenance instructions in this manual. Use only trained operators who have
demonstrated the ability to operate and service this machine correctly and safely. - This operator’s manual is to be stored in the manual compartment equipped on this machine. Make sure this manual
is complete and in good condition. Contact your dealer to obtain additional manuals or manuals in languages other
than that of the country of use. - Your dealer is at your disposal for any further information. He will also provide any after-sales service you may require
and genuine replacement parts, your guarantee of quality and match. - This manual contains information concerning the adjustment and maintenance of your new equipment. You have
purchased a dependable machine, but only by proper care and operation can you expect to receive the performance
and long service built into this equipment. Please have all operators read this manual carefully and keep it available
for ready reference. - Your authorized dealer will instruct you in the general operation of your new equipment. Your dealer’s staff of factory-
trained service technicians will be glad to answer any questions that may arise regarding the operation of your
machine.
TABLE OF CONTENTS:
Case 1021G 1121G Tier 2 Wheel Loader Operator’s Manual 51638122 – PDF DOWNLOAD
1 GENERAL INFORMATION
Note to the owner 1-1
Intended use 1-4
Electro-Magnetic Compatibility (EMC) 1-5
Metric and imperial units abbreviations 1-6
Product identification 1-9
Operator’s manual storage on the machine 1-12
Machine orientation 1-13
Identification of machine components 1-14
2 SAFETY INFORMATION
Safety rules and signal word definitions 2-1
Personal safety 2-2
Safety rules 2-3
Seat belts 2-11
Support strut and service link 2-12
Utility safety 2-14
Ecology and the environment 2-15
Hand signals 2-17
Safety signs 2-23
3 CONTROLS AND INSTRUMENTS
Access to operator’s platform
Proper entry and exit 3-1
Operator’s seat
Overview 3-3
Forward controls
Front console 3-12
Steering column 3-13
Pedal controls 3-15
Joystick steering 3-17
Right-hand side controls
Overview 3-20
Multifunction keypad 3-24
Control lever operation 3-27
Parking Brake 3-35
Arm pad 3-36
Exterior controls
Hood and Timed Disconnect Switches 3-37
Display
Display description 3-42
Status and warning icons 3-69
Climate controls
Climate controls 3-74
Cab air louvers 3-76
Windows
Windows 3-77
Internal cab lights
Cab lights 3-79
Follow Me Home Lights 3-80
4 OPERATING INSTRUCTIONS
Commissioning the unit
Before starting the engine 4-1
Starting the unit
Starting the engine 4-2
Operating in extreme temperatures 4-4
Cold temperature operation 4-5
Operating the machine 4-7
Stopping the unit
Stopping the machine 4-9
Moving the unit
Enabling the Auxiliary F-N-R switch 4-11
Ride control 4-12
Control levers 4-13
Auxiliary Forward, Neutral, Reverse (F-N-R) switch 4-21
Automatic mode 4-24
Loader functions 4-25
5 TRANSPORT OPERATIONS
Road transport
Safety rules 5-1
Recovery transport
Transporting the machine 5-2
Moving a disabled machine 5-5
6 WORKING OPERATIONS
Loader operations
Operating tips 6-1
Joystick steering operation 6-4
7 MAINTENANCE
General information
Servicing 7-1
Releasing pressure in the hydraulic system 7-3
Biodiesel 7-5
Fluids and lubricants 7-7
Engine cooling system 7-12
Maintenance planning
Maintenance chart 7-14
Daily inspection
Daily inspection 7-16
Every 10 hours
Engine oil level – Check 7-20
Every 50 hours
Bucket/attachment fittings – Grease 7-21
Machine fittings – Grease 7-22
Hydraulic oil level – Check 7-24
Transmission oil level – Check 7-25
Engine coolant level – Check 7-27
Initial 100 hours
Wheel nuts tightening – Check 7-28
Axle cooler filters (if equipped) – Replace 7-29
Engine oil (Initial) – Change 7-31
Engine oil filter (Initial) – Replace 7-33
Fuel pre-filter (Initial) – Replace 7-34
Fuel filter (Initial) – Replace 7-35
Hydraulic oil filters (Initial) – Replace 7-36
Front and rear axle oil (Initial) – Change 7-39
Every 100 hours
Machine fittings – Grease 7-41
Every 250 hours
Drive shaft slip joints – Grease 7-44
Cab air recirculation filter – Cleaning 7-45
Cab air pre-filter – Cleaning 7-47
Cab air filter – Cleaning 7-49
Wheels – Tire inflating 7-51
Drive belt – Check 7-53
Every 500 hours
Engine oil – Change 7-55
Engine oil filter – Replace 7-57
Fuel pre-filter – Replace 7-58
Fuel filter – Replace 7-59
Fuel tank sediment – Drain 7-60
Front and rear axle oil level – Check 7-61
Front and rear axle oil – Severe duty – Change 7-62
Roll Over Protective Structure (ROPS) – Check 7-64
Battery fluid level – Check 7-67
Every 1000 hours
Pivot points – Grease 7-68
Water from hydraulic system – Drain 7-70
Drive belt – Replace 7-71
Cab air recirculation filter – Replace 7-73
Cab air pre-filter – Replace 7-74
Cab air filter – Replace 7-75
Engine breather filter – Replace 7-77
Front and rear axle oil – Change 7-78
Every 1500 hours
Transmission oil – Change 7-80
Transmission oil filter – Replace 7-82
Transmission breather – Cleaning 7-83
Every 2000 hours
Cold weather hydraulic oil – Change 7-84
Hydraulic oil filter – Replace 7-86
Primary engine air filter – Replace 7-89
Secondary engine air filter – Replace 7-92
Frame and cab – Lubricate 7-95
Engine valve clearance – Check and adjust 7-96
Every 4000 hours
Engine coolant – Change 7-97
Standard weather hydraulic oil – Change 7-99
As required
Fuel pre-filter – Drain fluid 7-101
Air conditioning condenser – Clean 7-102
Parking brake – Check 7-103
Auxiliary steering – Check 7-105
Cab service – Check 7-107
Windshield washer fluid level – Check 7-110
Cooling box components- Check and clean 7-111
Electrical system
Battery – Cleaning 7-112
Battery electrolyte level – Check 7-115
Auxiliary battery connections – Check 7-116
Battery – Replace 7-119
Fuses and relays – Replace 7-120
Lights – Replace 7-125
Storage
Preparation 7-129
Every 30 days 7-130
Removal 7-131
8 SPECIFICATIONS
General specifications 8-1
Machine specifications and dimensions 8-7
Torque charts 8-16
Material weights 8-18
9 ACCESSORIES
General accessories 9-1
Telematics 9-6
VIDEO PREVIEW OF THE MANUAL:
PLEASE NOTE:
- This is the SAME manual used by the dealers to troubleshoot any faults in your vehicle. This can be yours in 2 minutes after the payment is made.
- Contact us at [email protected] should you have any queries before your purchase or that you need any other service / repair / parts operators manual.
S.V