Liebherr ER 954 C High-Rise 1380 Hydraulic Excavator Operating Manual SN 32643 – PDF DOWNLOAD
FILE DETAILS:
Liebherr ER 954 C High-Rise 1380 Hydraulic Excavator Operating Manual SN 32643 – PDF DOWNLOAD
Language : English
Pages : 314
Downloadable : Yes
File Type : PDF
DESCRIPTION:
Liebherr ER 954 C High-Rise 1380 Hydraulic Excavator Operating Manual SN 32643 – PDF DOWNLOAD
Product identification
Manufacturer: LIEBHERR France S.A.S.
Type: ER 954 C – High-Rise
Type no.: 1380
Conformity: CE
Introduction:
- This operating manual has been specifically devised for machine operators and maintenance personnel. It contains important warnings, information and tips regarding the maintenance and proper operation of the machine. It assists you in becoming familiar with the functions and features of the machine and helps prevent incorrect operation.
- By strictly adhering to the instructions in the operating manual, you can significantly enhance the reliability and service life of the machine.
- The operating manual is an integral part of the scope of delivery of the machine. Ensure that a copy is at all times available in the storage compartment in the operator’s cab.
- Carefully read the operating manual before starting the machine and then regularly read it again. All persons carrying out work on or with the machine must be fully familiar with the content of the operating manual and must adhere to the instructions.
– Maintenance including inspection, servicing and repair.
– Transport or loading of the machine.
- The machine owner must ensure that this operating manual is complemented with the relevant statutory regulations for accident prevention and the protection of the environment. Apart from the instructions in this operating manual and the statutory accident prevention, health and safety regulations applicable in the country of operation, all personnel working on or with the machine must adhere to best practice for safe and proper operation.
- Certain sections in this manual might not apply to your specific model.
- Some of the figures in this operating manual might show details or equipment that differ from those in your machine.
- Some of the figures show the equipment with guards or covers removed (for better depiction).
- As our products are constantly being improved, certain changes might be made to the equipment which are not referred to specifically in this operating manual.
- Should you require additional information or if you have any queries, please contact the LIEBHERR customer service department.
Warranty and liability:
- Due to the range of products (e.g. fuels, lubricants, tool attachments, spare parts) available from other manufacturers, LIEBHERR is not in a position to assess the compatibility of these products with its own machines. This also applies in relation to possible effects that third-party products have on LIEBHERR products and vice versa.
- It is therefore the responsibility of the machine owner to assess whether third-party products can be safely used in conjunction with the LIEBHERR machine. LIEBHERR shall not be liable for damage to or downtimes of LIEBHERR machine caused by the use a third-party products. Such damage is not covered by the LIEBHERR warranty.
- LIEBHERR shall not be liable for damage caused by improper operation, insufficient maintenance or non-compliance with safety instructions.
Amendments, general terms and conditions, copyright:
- We reserve the right to modify our products and amend the instructions in this operating manual without prior notice.
- The reproduction or publication of the content of this operating manual (including figures) is prohibited. LIEBHERR reserves all rights in this operating manual, including copyright.
- The warranty and liability clauses of the general business terms and conditions of LIEBHERR apply.
TABLE OF CONTENTS:
Liebherr ER 954 C High-Rise 1380 Hydraulic Excavator Operating Manual SN 32643 – PDF DOWNLOAD
1 Product description1-1
11 Assembly – overview 1-1
111 Machine with industrial attachment1-1
112 Uppercarriage 1-2
113 Undercarriage 1-3
12 Vibration emissions 1-3
13 Sound emission1-4
14 EC Declaration of Conformity1-5
15 Technical data1-6
2 Safety instructions, Signs on the machine2-1
21 Meaning of the symbols in this manual 2-1
22 Use in accordance with the regulations (High Rise)2-2
23 Safety instructions specific to electrical systems2-2
24 Safety Instructions2-4
25 Servicing the machine safely2-16
26 Signs on the machine2-23
261 Introduction 2-23
262 Arrangement of signage2-24
263 Explanation of signage2-25
264 Type plates on the machine2-31
3 Control and operation3-1
31 Operating and control elements 3-1
311 Controls in the operator’s cab3-1
312 The joysticks 3-3
313 Control unit3-7
314 Monitoring display3-12
315 Main screen 3-14
316 Information provided in the menus3-18
317 Controls and instrumentation for optional equipments3-31
32 Access and equipment of the cab 3-35
321 Access to the cab3-35
322 The safety lever 3-38
323 Operator seat3-38
324 Putting on and releasing the safety belt3-42
325 Windscreen3-42
326 Sunshade3-43
327 Emergency exit – rear window3-44
328 Interior lighting 3-44
329 Fire extinguisher 3-44
3210 The heater and air conditioner3-45
33 Setting the machine into operation3-53
331 Notes on measures to be taken before starting the machine3-53
332 Switching on the electrical system3-55
333 Starting the electric motor3-58
334 Shutting down units3-58
335 Starting aids3-59
336 Immobilizer with electronic ignition key (option)3-60
34 Working with the machine 3-62
341 The travel movements 3-62
342 Cable winding drum (option)3-65
343 Drive warning device (option)3-70
344 The uppercarriage swing movements3-71
Operating manual
ER 954 C – High-Rise / 11211691
MJFCIFSS
copyright by
345 Working position3-73
346 Working attachment control3-74
347 Lowering the working attachment with the engine shut down3-76
348 Rotating, tilting, locking and unlocking a working tool3-76
349 Control of additional attachments via the additional pedals3-77
3410 Commutation of control for an additional attachment (option)3-80
3411 Cut off by end switches of attachment movements (option)3-82
3412 Use of the excavator for lifting loads overhead3-86
3413 Overload warning device (Option)3-87
3414 Hydraulically adjustable cab (option) 3-88
3415 Cab adjustable on hoist frame with double parallelogram3-91
35 Emergency operation 3-96
351 Emergency control circuit board E52 for electric motor & servo control3-96
352 Emergency operation of the working pumps3-98
353 Emergency operation of boom cylinders (option)3-99
36 Recovering, towing the machine 3-101
361 Towing with the machine, emergency towing of the machine3-101
37 Attaching and dismounting equipment parts 3-105
371 Attaching and dismounting the grab on the industrial stanchion3-105
372 Attaching and dismounting the stick to the boom3-107
373 Mechanical quick-change adapter (option) 3-109
374 Hydraulic quick-change adapter (option)3-113
375 LIKUFIX – hydraulic coupling system (option) 3-120
38 General working methods3-123
381 Minimum impact working methods for your machine 3-123
382 Preparatory activities3-123
383 Using a backhoe bucket3-124
384 Loading a transport vehicle3-126
385 Skimming 3-126
386 Using a clamshell bucket (earthmoving attachment)3-127
387 Using a multiple tine grapple (industrial attachment) 3-129
388 Using an hydraulic hammer3-130
39 Installing and removing the serial counterweight3-132
310 Transport 3-135
3101 Transporting the machine on a low loader3-135
3102 Loading the machine with a crane 3-135
4 Malfunctions4-1
41 Error code list 4-2
42 Troubleshooting4-4
421 Hydraulic system4-4
422 Travel gearbox 4-5
423 Electrical system 4-5
424 Working attachment 4-6
425 Heating and air-conditioning system4-6
43 Fuses and relays 4-8
431 Power switch cabinet with main fuses E50 4-8
432 A1010 printed circuit board 4-9
5 Maintenance5-1
51 Access doors for maintenance 5-1
511 Overview of access doors5-1
512 Door retaining rods5-2
52 Cleaning machine5-2
53 Care for rubber components5-3
54 Lubricants and fluids5-3
541 General information5-3
Operating manual
ER 954 C – High-Rise / 11211691
MJFCIFSS
copyright by
542 Filling volume and lubricant chart 5-4
55 Lubricants and fluids specification5-7
551 Lubricant for motor bearing5-7
552 Heating fluid system5-8
553 Checking heating fluid, adjusting mixing ratio5-11
554 Hydraulic oil 5-14
555 Lubricants for gearboxes 5-18
556 Grease 5-20
557 Lubricants and care products for electrical and mechanical components5-20
56 Electric motor 5-21
561 Type plate 5-21
562 Routine maintenance5-21
563 Reversible fan (option)5-24
57 Hydraulic system5-24
571 Depressurising the hydraulic system 5-25
572 Checking oil level in hydraulic tank; emptying and refilling tank 5-26
573 Checking and cleaning oil cooling system 5-29
574 Return filter 5-30
575 Leak oil filter5-31
576 Control oil filter5-32
577 Feed line filter of the slewing gear circuit5-33
578 Control circuit5-33
579 Bleeding the hydraulic pumps5-34
5710 Bleeding the hydraulic cylinders 5-36
5711 Disconnecting suction hose of pump 5-38
5712 Breather filter on hydraulic tank 5-39
5713 Bypass oil filter for hydraulic system (option)5-40
5714 Return oil filter for hydraulic hammer (option)5-41
5715 Servicing the hydraulic cylinder 5-42
5716 Replacing hydraulic hoses5-43
58 Oil changes on components5-44
581 General information 5-44
582 Swing gear – Oil level check and oil change 5-45
583 Travel gear oil change 5-45
584 Pump distributor gear – oil change5-47
59 The track components5-48
591 Checking the mounting screws of the track components5-48
592 Checking the track chains tension 5-48
593 Retensioning the track 5-50
594 Releasing the track chain tension5-50
595 Cleaning the track components5-51
596 Replacing track components at “High Rise” excavators 5-52
510 Electrical installation5-53
5101 Rotary connection5-53
5102 24 V electrical system5-54
5103 Battery care (option) 5-54
5104 Slip ring body (option)5-55
5105 Cabinet air pressuring system (option) 5-56
511 Heating and air-conditioning system 5-57
5111 Recirculated and ambient air filters5-57
5112 Heating system 5-58
5113 Air-conditioning system5-59
512 Greasing the machine 5-62
5121 The centralized lubrication system5-62
5122 Semi automatic and full automatic systems5-64
5123 Operation of the semi automatic system5-64
5124 Operation of the full automatic system5-65
5125 Emergency lubrication with defective lubrication system5-67
Operating manual
ER 954 C – High-Rise / 11211691
MJFCIFSS
copyright by
5126 To refill a grease container5-67
5127 Changes in the lubrication circuit 5-68
5128 Greasing the grab (optional extra)5-69
513 Quick-change systems 5-70
5131 Greasing the mechanical quick-change adapter (option)5-70
5132 Hydraulic quick-change adapter (option)5-70
5133 LIKUFIX (option)5-71
514 Check mounting bolts for tightness 5-72
5141 Mounting bolts of the counterweight 5-73
5142 Mounting screws of the swing ring5-73
5143 Mounting screws of the hydraulic oil and fuel tank5-74
5144 Mounting screws of the swing gear and motor5-74
5145 Mounting bolts central piece to side frames (option “removable side frames”)5-74
5146 Fixing bolts of catwalks around the upperstructure5-75
515 Drive unit brakes and swing gear brakes 5-75
516 General maintenance points5-76
5161 Replacing working parts5-76
5162 Checking or replacing the teeth on the bucket5-76
5163 Welding work on the machine5-78
517 Inspection and maintenance schedule 5-78
IMAGES PREVIEW OF THE MANUAL:
VIDEO PREVIEW OF THE MANUAL:
PLEASE NOTE:
- This is the SAME manual used by the dealers to troubleshoot any faults in your vehicle. This can be yours in 2 minutes after the payment is made.
- Contact us at [email protected] should you have any queries before your purchase or that you need any other service / repair / parts operators manual.
S.V