Linde Diesel Forklift Truck 391 Series: H14, H16, H18, H20 Operating Manual (User Manual)
FILE DETAILS:
FILE TYPE:PDF
MANUAL LANGUAGE:ENGLISH
PAGES:266
DOWNLOADABLE:YES
DESCRIPTION:
Forklift trucks in the 391 series are designed to handle loading and palletising operations for loads up to 1.4tforH 14, upto 1.6 tfor H 16, upto 1.8tforH 18 and upt02.0tforH 20ata load distance of 500 mm. The H 20 600 forklift truck supports loading and palletising of 2.0 t, given a load distance of 600 mm. Details on the exact lift height specific maximum loads are available in the load capacity diagram.
SCREENSHOT OF THE MANUAL:
TABLE OF CONTENTS:
- Linde Diesel Forklift Truck 391 Series: H14, H16, H18, H20 Operating Manual (User Manual)
- 1 Introduction
Your forklift truck 2
Intended use 3
Impermissibleuse 4
Description of useand climatic conditions 4
Symbols used 5
Technical description 5
Receivingthe industrialtruck 7
Legal requirementsfor placingonthe market 8
2 Safety
Safety guidelines 10
Residualrisks 11
Stability 12
Inthe case of tip-over 12
Handling consumables 12
Competent person 13
Regulations 13
Fit attachments 14
Fork carriage emergency lowering 17
Emergency exit with attached rearwindow 18
3 Overview
Identificationplates 22
Truck overview 24
Operating elements 25
Display unit 26
Switch panel 33
4 Operation
Service plan before initial commissioning 36
Instructionsfor running-in 36
Pre-shift checks 37
Operating Instructions- 391 807 10 01 EN-06/2013 III
Standard equipment 38
Entering and exiting the truck 38
Adjusting the driver’s seat 38
Adjusting the steering column 42
Setting the clock 42
Seat belt 43
Starting and stopping the internal combustion engine (dual-pedal operation) 45
Driving (dual-pedal operation) 48
Starting and stopping the internal combustion engine (single-pedal operation) 51
Driving (single-pedal operation) 55
Steering system 58
Brake system 58
horn 60
Joystick with central lever operation 61
Joystick with single lever operation 66
Special equipment 72
Joystick with central lever operation and 3rd auxiliary hydraulics without toggle
switch 72
Joystick with single lever operation and toggle switch-controlled 3rd auxiliary hy¬
draulics 78
Depressurisation 84
Adjusting the driver’s seat equipped with air suspension 84
Adjusting the driver’s seat with rotating device 86
Driver’s cabin 88
Lighting 88
BlueSpot 91
Windscreen wiper 92
Window heater 95
Heating system, air conditioning 95
Regeneratingthe particle filter 98
Regeneratingthe changing particle filter 101
Linde Forklift Data Management (LFM) 104
Mast positioning 110
Working underload 112
Before taking up load 112
Adjusting the fork arm distance 113
Picking up a load 114
Travelling with load 115
Setting down loads 116
Towing device 116
IV Operating Instructions-3918071001EN-06/2013
Before leavingthe truck 118
Loading/Transporting 119
Removingthe lift mast 119
Driving without the lift mast 119
Loading the crane 119
Transportation by lorry or low-bed semi-trailer 120
5 Maintenance
General information 122
Inspectionand maintenance data 123
Recommendationsfor consumables 124
Inspectionand maintenance overview 127
Service plan as required 127
1000 h service plan 128
3000 h Service plan 130
6000 h Service plan 133
9000 h Service plan 136
Engine 139
Checking the engine oil level 139
Changing the engine oil and engine oil filter 140
Fuel 143
Draining water from the fuel filter 145
Changing the fuel filter 145
Cleaning the fuel tank ventilation hose 147
Checking the coolant level 147
Changing the coolant 148
Checking the coolant concentration 150
Cleaning the water cooler and hydraulic oil cooler, and checking them for leaks 152
Checking the condition and secure positioning of the engine support and engine
mounting 154
ChecktheconditionoftheV-ribbedbelt 154
Changing the V-ribbed belt 155
Changing the toothed belt and tensioning pulley 156
Changing the water pump 156
Checking the toothed belt drive 156
Changing the air filter cartridge 156
Changing the air filter safety cartridge 157
Check the dust discharge valve 159
Cleaning the prefilter (special equipment) 160
Cleaning the oil bath air filter (special equipment) 160
Operating Instructions-391 807 1001EN-06/2013 V
Change the oil in the oil bath air cleaner (Optional) 161
Check the intake and exhaust pipes for leaks 162
Checking the particle filter system 162
Draining water from the water trap at the changing particle filter (special equip¬
ment) 163
Cleaningthe water trap at the changing particle filter (special equipment) 163
Cleaning the pressure control device at the changing particle filter (special equip¬
ment) 164
Gearbox 165
Drive axle and wheel motors: Checking mounting 165
Checking and adjusting the side stops on the drive axle 166
Checking the drive axle bearings for wear 166
Checking the mounting of the hydraulic pump on the engine 167
Chassis, bodywork andfittings 168
Cleaning the truck 168
Bonnet 168
Floorplate 170
Maintainingthe heating system and air conditioning (special equipment) 171
Checking the condition and correct function ofthe seat belt 172
Chassis: Checkingthe mounting 174
Checking and oiling the bearing points and joints 175
Topping upthe washer system container (special equipment) 176
Chassisframe 177
Wheelchange 177
Tighten the wheel bolts 177
Checking the tyres for damage and foreign objects 178
Checking the tyre pressure 178
Checking the condition ofthe antistatic belt 180
Cleaning and lubricating the steering axle, checking the mounting 180
Controls 181
Checking the parking brake for correct operation 181
Checking the pedal group 181
Checking the bellows at the actuating lever 182
Electrics 183
Check the condition and secure positioning of electric cables, cable connectors and
connections 183
Battery: condition check, disposal 183
Hydraulics 185
Checking the oil level in the hydraulic system 185
Changingthe hydraulic oil 186
Hydraulic system: changing the filter 188
VI Operating Instructions-3918071001EN-06/2013
Checking the bleeder valve onthe hydraulic tank for correct function 191
Check the hydraulic system for leaks 192
Checking the tilt cylinder bearings for wear 193
Checkthemountingofthetiltcylinders 193
Checking the hose carriage 193
Checking the pre-load of the double hoses 195
Load lift system 196
Working on the lift mast and at the front of the truck 196
Cleaning and spraying the lift mast chain 199
Checking the mounting, condition and function of the lift mast, lift mast chains, lift
cylinders and end stops 200
Adjusting the lift mast chain 200
Checking the fork arms and fork arm safety devices 202
Cleaning and lubricating the sideshift (special equipment), checking the fastening ….203
Checking the sideshift (special equipment) for wear 204
Cleaning and lubricating the fork prong positioner (special equipment), checking the
mounting 204
Checking the fork prong positioner (special equipment) for wear 205
Self-help 206
Open cover of electrical system 206
Fusesfor basic and special equipment 207
Mainfuses in the engine compartment 208
Diagnostics connector 209
Malfunctions during operation 210
Malfunctions, causes and remedies: Diesel engine 212
Malfunctions, causes and remedies— hydraulic system 215
Jump start 217
Towing 218
Shutting down 222
Shutting down the truck 222
Disposal of old trucks 223
Operating Instructions- 391 807 10 01 EN-06/2013 VII
6 Technical data
Overview of dimensions 226
TypesheetH14D 227
Type sheet H16D 230
Type sheet H18D 233
Type sheet H20D 236
Type sheet H20D-CT/600 239
Lift mast data model 181 242
Truck configuration 243
Tyre variants and rim sizes 244
Load capacity diagrams 245
Additional capacity rating platefor attachments 246
Noiseemission values 247
Vibration characteristic values for bodily vibrations 248
VIII Operating Instructions-3918071001EN-06/2013
VIDEO PREVIEW:
PLEASE NOTE:
⦁ This is the SAME exact manual used by your dealers to fix your vehicle.
⦁ The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
⦁ Any queries / doubts regarding your purchase, please feel free to contact [email protected]
Ramon Quentin –
Paypal sucks!! Dont have paypal.