Manitou M2 30/40 H P/C-PS/-P M2 30/40 H P/C-PL/-PXL M2 30/40 H P/C-PSL M2 50 H P/C-PS Operator Manual – PDF DOWNLOAD
IMAGES PREVIEW OF THE MANUAL:
DESCRIPTION:
Manitou M2 30/40 H P/C-PS/-P M2 30/40 H P/C-PL/-PXL M2 30/40 H P/C-PSL M2 50 H P/C-PS Operator Manual – PDF DOWNLOAD
CATALOG B427
M2 30/40 H P/C –PS/–P
M2 30/40 H P/C –PL/–PXL
M2 30/40 H P/C –PSL
M2 50 H P/C –PS
HYDROSTATIC TRANSMISSION
S/N: M230H0330 and ABOVE
S/N: 165043 thru 181963
(except 170493 & 170514)
STUDY THE OPERATOR/SERVICE MANUALS :
The information in this manual provides general instructions for the safe operation and maintenance of the ’M’ Series 4-Speed Forklift Truck. This information is vital and must be clearly understood by the operator/serviceman. Study this manual (part no. B426) and the RoughTerrain Forklift Safety Manual (part no. 422494) thoroughly and carefully before operating or servicing your forklift. Contact your Manitou dealer if you have any questions concerning your forklift, its operation, service or parts. Keep both manuals in the literature box on the forklift available for reference. If either manual becomes illegible or is missing, contact your dealer for replacements immediately. Additional recommended literature: ANSI / ITSDF B56.6 Industrial Truck Standards Development Foundation (ITSDF). It can be obtained free of charge on their website at www.itsdf.org. This manual cannot cover every situation that might result in an accident. It is the responsibility of the operator to always remain alert for potential hazards and be prepared to avoid them!
ATTEND OPERATOR TRAINING CLASSES :
The forklift operator must clearly understand all instructions concerning the safe operation of the forklift and all safety rules and regulations of the work site. They must have successfully completed a training coarse in accordance with the Powered Industrial Truck Standard (29 CFR 1910.178) as described by the Occupational Safety and Health Administration (OSHA). They must be qualified as to their visual, hearing, physical, and mental ability to operate the equipment safely. NEVER use drugs or alcohol while operating a forklift! NEVER operate or allow anyone to operate a forklift when mental alertness or coordination is impaired! An operator on prescription or over–the–counter drugs must consult a medical professional regarding any side effects of the medication that may impair their ability to safely operate the forklift.
CREATE A MAINTENANCE PROGRAM :
OSHA recommends a maintenance log, listing repairs requested and completed, for each forklift. Also, “lock out tag procedures” should be utilized. If the forklift mal functions; park it safely, remove the key, tag “Do Not Use”, and report the problem to the proper authority or authorized service personnel immediately. For the best forklift performance and operation, a maintenance program is required. Use the hour meter on the instrument panel to keep maintenance properly scheduled (see SECTION TWO — “SERVICING SCHEDULE”). For repairs on major components (engine, transmission, etc.), contact your nearest dealer for a Repair Manual (part no. B378). Do not operate a forklift that is damaged or does not function properly. After repairs, the lift truck must be tested for safe operation before returning to service.
TABLE OF CONTENTS:
Manitou M2 30/40 H P/C-PS/-P M2 30/40 H P/C-PL/-PXL M2 30/40 H P/C-PSL M2 50 H P/C-PS Operator Manual – PDF DOWNLOAD
SECTION ONE – FORKLIFT OPERATION AND SAFETY 1 – 1
– SAFETY MESSAGES AND
CALIFORNIA PROPOSITION 65 WARNING 1 — 2
– FORKLIFT OPERATION REQUIREMENTS 1 — 3
– SAFETY RULES FOR OPERATORS 1 — 5
– INSTRUMENTS AND CONTROLS 1 — 10
– DRIVING THE FORKLIFT 1 — 17
– LIFTING AND HANDLING LOADS 1 — 18
SECTION TWO – SERVICING THE FORKLIFT 2 – 1
– FILTERS 2 — 2
– LUBRICANTS 2 — 3
– SERVICE CHART 2 — 4
– SERVICING SCHEDULE:
DAILY OR EVERY 10 HOURS SERVICE 2– 6
EVERY 50 HOURS SERVICE 2– 8
EVERY 150 HOURS SERVICE 2– 12
EVERY 450 HOURS SERVICE 2– 14
EVERY 900 HOURS SERVICE 2– 17
SEASONAL OR EVERY 1800 HOURS SERVICE 2– 20
– ELECTRICAL SYSTEM 2– 21
– BLEEDING THE FUEL SYSTEM 2– 22
– TRUCK INSPECTION CHECK LIST 2– 23
ELECTRICAL SCHEMATIC 2– 25
SECTION THREE – SPECIFICATIONS 3 – 1
– DESCRIPTION 3 — 2
– IDENTIFICATION NAME PLATES 3 — 3
– SPECIFICATIONS 3 — 6
VIDEO PREVIEW OF THE MANUAL:
PLEASE NOTE:
- This is the SAME manual used by the dealers to troubleshoot any faults in your vehicle. This can be yours in 2 minutes after the payment is made.
- Contact us at [email protected] should you have any queries before your purchase or that you need any other service / repair / parts operators manual.
S.V