Skyjack SJ-1000 Series Engine Powered Operating Maintenance & Parts Manual 104322-1 – PDF DOWNLOAD
FILE DETAILS:
Skyjack SJ-1000 Series Engine Powered Operating Maintenance & Parts Manual 104322-1 – PDF DOWNLOAD
Language : English
Pages :132
Downloadable : Yes
File Type : PDF
DESCRIPTION:
Skyjack SJ-1000 Series Engine Powered Operating Maintenance & Parts Manual 104322-1 – PDF DOWNLOAD
SECTION 1
INTRODUCTION
INTRODUCTION
PURPOSE OF EQUIPMENT
The SKY JACK SJ-1 000 Series Work Platform is designed to transport and raise men and materials to overhead work areas
USE OF THE EQUIPMENT
The work platform (Fig. 1-2) is a highly maneuverable, mobile work station. Lifting and elevated driving MUST be on a flat, level, compacted surf ace. The work platform can be driven over uneven terrain only when the platform is in the fully lowered position.
DESCRIPTION
- The work platform consists of three major assemblies, the platform, lifting mechanism and base. An qperator’s control box is mounted on the platform · railing. Auxiliary and emergency controls are located at the base. PLATFORM – The platform is constructed of a tubular support frame, a skid-resistant deck surface, and 43- 1/2″ high railings with 6″ toe boards and mid-rails.
- The platform can be entered from either side thru a spring returned gate or entry chain w/latch. All models can be equipped with single or dual extension platforms. LIFTING MECHANISM – The lifting mechanism is constructed of formed-steel sections making up a scissor-type assembly. The scissor-type assembly is raised and lowered by single-acting hydraulic lift cylinders with holding valves.
- A two-stage pump, 1-1 driven by the engine provides hydraulic power to the lift cylinders. A mechanical centering device provides accurate centering of the scissor assembly with relationship to the platform and base.
- A safety bar located inside the lifting mechanism prevents (when properly positioned) the scissor assembly from being lowered while performing maintenance or repairs within the lifting mechanism. BASE – The base is a rigid one-piece weldment which supports two component side trays. One tray contains hydraulic components, up/down controls, electrical components and starter battery.
- The other tray contains the fuel tank and storage area. The front axle has two wheels, steerable by a hydraulic cylinder and is either non-driven (2WD models) or drive shaft/gear box driven (4WD models). The rear axle is drive shaft/gear box driven and has dual parking brakes. At the front of the base, an engine coupled with a hydraulic pump provides power to the hydraulic system. An engine
IMAGES PREVIEW OF THE MANUAL:
TABLE OF CONTENTS:
Skyjack SJ-1000 Series Engine Powered Operating Maintenance & Parts Manual 104322-1 – PDF DOWNLOAD
Cover 1
Index 3
Section 1 – Introduction 5
Section 2 – Operation 13
Section 3 – System Component Identification and Schematics 21
Section 4 – Maintenance and Troubleshooting 55
Section 5 – Parts List 69
VIDEO PREVIEW OF THE MANUAL:
PLEASE NOTE:
- This is the SAME MANUAL used by the dealerships to diagnose your vehicle
- No waiting for couriers / posts as this is a PDF manual and you can download it within 2 minutes time once you make the payment.
- Your payment is all safe and the delivery of the manual is INSTANT – You will be taken to the DOWNLOAD PAGE.
- So have no hesitations whatsoever and write to us about any queries you may have : heydownloadss @gmail.com
S.M