Massey Ferguson SA MF 9200 Series 9255 Draper Header Operator’s Manual – PDF DOWNLOAD
DESCRIPTION:
Massey Ferguson SA MF 9200 Series 9255 Draper Header Operator’s Manual – PDF DOWNLOAD
A word to the operator:
- It is your responsibility to read and understand the safety section in this manual and the manual for all implements before you operate this machine. You are responsible for your safety. Good safety procedures prevent injury to you and the persons around you. Make the information in the safety section of this manual a part of your safety procedure.
- This safety section is written only for this type of machine. Safety is your responsibility. You can prevent injury and death. This safety section gives basic safety examples that can occur during the operation and maintenance of your machine. This safety section is not a replacement for safety instruction in other sections of this manual.
- Injury or death can occur if the safety instruction is not obeyed. Learn how to operate the machine and how to use the controls correctly. Do not operate the machine if you do not know how to operate the machine. Do not let persons operate the machine that do not know how to operate the machine. Follow all safety instructions in the manuals and on the safety signs on the machine, the implements, and the attachments. Use only approved attachments and implements. Make sure that your machine has the correct equipment that is necessary by the local regulations.
Operator manual:
This manual covers general safety instructions for this machine. Keep this manual with the machine. Right and left, as used in this manual, are given as if you are in the operator seat. The photos, illustrations, and data used in this manual were up to date when published, but in-line production changes can make your machine have small differences. The manufacturer reserves the right to redesign and change the machine as necessary without notification.
Prepare for operation:
- Read and understand the operating instructions and precautions in this manual before you operate or perform service оn the machine. Make sure that you know and understand the positions and operations of all controls. Make sure that all controls are in neutral and the parking brake is applied before you start the machine. Make sure that the steering wheel is in the center position and locked.
- Make sure that all persons are а sufficient distance from your area of work before you start or operate the machine. Do checks оn the controls and learn all controls in an area clear of persons and objects before you start work with the machine. Know the dimensions of the machine and have sufficient space available for operation. Do not operate the machine at high speeds around persons, buildings, other equipment, etc. Always use correct procedures when you do tasks around and operate the machine. Do not let children or persons who do not know how to operate the machine operate the machine. kеер other persons away from your area of work.
- Do not let other persons ride оn the machine. Make sure that the machine is in the good mechanical condition. Make sure that the machine has the correct equipment as necessary bу local regulations. All equipment has а limit. Make sure you understand the speed, brakes, steering, stability, and load characteristics of this equipment before you start.
TABLE OF CONTENTS:
Massey Ferguson SA MF 9200 Series 9255 Draper Header Operator’s Manual – PDF DOWNLOAD
SAFEТY 1
Safety Alert Symbol 1
Safety Messages 1
lnformational Messages 1
Safety Signs 2
А Word То The Operator 3
Operator Manual 4
Prepare For Operation 4
Operation 5
General lnformation 5
РРЕ (Personal Protection Equipment) 6
Seat lnstructions 7
Shield and Guards 7
Exhaust Warning 8
Flying Debris 8
Handrails 8
Travel Оп PuЫic Roads 9
Maintenance 1 О
General lnformation 10
Fire Prevention and First Aid 12
Checking for High Pressure Leaks 13
Tire Safety 13
Accumulator Safety 14
Cylinder Stops 14
Reel Lift Cylinder Stops 14
Header Lift Cylinder Stop 15
Shield Latches 16
Draper Drive Shields 17
Auger Shaft Shield 17
End Shields 17
Divider Shield 18
Reel Drive Shield 18
Safety Sign Location 19
Left-hand, Rear View of the Header 19
Right-hand, Rear View of the Header 20
Center, Rear view of the Header 21
Front of Header 21
Ends of Header 21
Safety Decals 23
lnformational Decals 26
GENERAL INFORMATION 29
lntroduction 29
Replacement Parts 29
Recommended Header/Comblne Usage 29
Machine ldentification 29
OPERATION 31
Checklists 31
Daily 31
Before Each Season 31
End of Season 31
Comblne Setup 32
2009 Model Year and Later Axial Comblnes 32
2003 to 2008 Model Year Axial and
2003 Model Year and Later Transverse Comblnes 32
Original lnstructions
71483066А
CONTENTS
Required Kits to lnstall the Header оп ComЬines 33
Header Break-in 33
Draper belt 33
Parking Stands 33
Header lnstallation and Removal 34
lnstallation 34
Removal 36
Reel Position 38
Reel Fore and Aft 38
Reel Height 40
Reel Speed 40
Reel Speed Sensor 41
Tine Pitch Adjustment 41
Header Control Sensors 42
Drag Rod Sensors 42
Cutterbar Sensors 43
Header Pitch 44
2009 and Later Axial ComЬine 44
2003 and Later Transverse and 2003 to 2008 Axial ComЬines 45
Cutterbar 46
Recommended Cutterbar Flex Pressure 46
Adjusting Cutterbar Flex Pressure 46
Locking and Unlocking Cutterbar 48
Sickle Storage 48
Header Extremity Lights 49
Flighting Filler 49
Center С гор Deflector 49
Header Transport Kit 50
Transport to Field Position 50
Field to Transport Position 56
Connecting the Header Transport to Hitch 56
Accessories 57
Reel Divider 57
Divider Rod 57
LUBRICATION AND MAINTENANCE 59
Lubrication and Maintenance 59
Lubrication Details 60
Gear Вох Oil Level 63
Sealed Chain 64
Lubrication and Cleaning 64
Саге of Roller Chains 65
Roller Chain Don’ts 65
Adjustment 66
Drive Belts 66
Ргорег Саге of Belts 66
Adjustments 66
Draper Maintenance 68
Draper Саге 68
Draper Tension 68
Draper Removal 69
Draper Roller Scraper Clearance 70
Center Deck Flotation Spring 70
Reel 71
Tine Replacement 71
Reel Lift Arms 71
Cutterbar 73
Sickle Replacement 73
Sickle (Standard) Hold Down Pressure 88
Sickle Register 89
Sickle Section Replacement 89
Guards, Wear Plates, SCH Knife Back Rollers, and Hold-Downs 106
SCH Sickle 113
71483066А
CONТENTS
Sickle Timing 119
Sickle Drive Shear Bolt 120
Sensor Adjustment and Calibration 121
Automatic Header Height Control (АННС) Calibration 121
Header Sensor Calibration 121
Reel Speed Sensors 121
Drag Rod Sensors 122
Cutterbar Sensors 124
Transport Wheel Torque 127
Hydraulics 127
Bleeding Cylinders 127
Hydraulic Schematic 129
Electrical 131
Wiring Diagram 131
TROUBLESHOOTING 133
Cutterbar 133
Reel 134
Draper 135
SPECIFICATIONS 137
Dimensions and Weights 137
Header Depth 137
Header Width 138
Weights 138
Pick-Up Reel 138
Reel Drive 139
Reel Height Control 139
Cutterbar 139
Sickle 139
Header Tilt 140
Drapers 140
Side Drapers 140
Center Draper 140
Center Conveyor 140
General Lubrication 140
Wheels 141
Header Transport 141
Torque 142
Standard Torque Requirements 142
Metric Bolts Markings and Torque Requirements 143
Metric lnformation 144
ASSEMBL У 145
Header AssemЫy 145
Shipping Stand Removal 145
Reel Lift Cylinders 147
Reel 148
Bracket and Wire Removal 149
Left-hand and Right-hand Draper lnstallation 150
Center Draper lnstallation 152
Pre-Delivery Checklist 154
Delivery Checklist 154
INDEX 155
VIDEO PREVIEW OF THE MANUAL:
IMAGES PREVIEW OF THE MANUAL:
PLEASE NOTE:
- This is the SAME manual used by the dealers to troubleshoot any faults in your vehicle. This can be yours in 2 minutes after the payment is made.
- Contact us at [email protected] should you have any queries before your purchase or that you need any other service / repair / parts operators manual.
S.V