Massey Ferguson MF7340 Combines Operator’s Manual – PDF DOWNLOAD
DESCRIPTION:
Massey Ferguson MF7340 Combines Operator’s Manual – PDF DOWNLOAD
MF 7340- SIN=> ZN205512_03010001
INTRODUCTION:
- Your new self-propelled combine is manufactured for harvesting seed and cereal crops, for threshing, separating, cleaning and conveying the grain into the tank and depositing the straw on the ground. This Operator’s Manual should be used as a practical reference guide: It contains all the necessary practical information for the operation, adjustment and maintenance of your new machine.
- Your combine was designed and built to ensure optimum performance, comfort and ease-of-operation in a wide variety of crops and conditions. The combine has been thoroughly inspected prior to delivery both at the factory and by your Dealer, to ensure you receive it in perfect condition. To keep the combine in perfect condition and to ensure trouble-free performance, the periodical maintenance operations listed in this manual should be carried out at the recommended intervals.
- Before operating and/or driving the combine, read this Operator’s Manual carefully, paying particular attention to the section on safety rules. Always keep this manual on hand for further reference. The terms “left” and “right” are always used with reference to the machine travelling direction. Should you require further information about the machine, please do not hesitate to contact your authorised Dealer. Your Dealer provides specially trained personnel, genuine quality spare parts and the required tools to solve any problems that may arise.
- The genuine spare parts and accessories have been specifically designed for this type of machine. Only genuine parts supplied by your authorised Dealer can guarantee correct operation and optimum performance. Never use non-genuine spare parts or accessories: Some accessories (e.g. PTO shafts, straw choppers, tables) require an EC certification, which can be provided only by the manufacturer or his qualified and recognised sub-suppliers.
- Non-genuine spare parts have not been tested and are not authorised by the manufacturer. The fitting and/or use of such equipment may have a damaging effect on the design features of the machine and jeopardise operational safety. The manufacturer disclaims all liability in the event of loss or damage arising as a result of non-genuine parts, accessories or equipment being used. It is expressly prohibited to make any modification to the combine without the prior written authorisation by the manufacturer.
TABLE OF CONTENTS:
Massey Ferguson MF7340 Combines Operator’s Manual – PDF DOWNLOAD
1 General Information 13
1 1 Information 15
1 1 1 Introduction 1 5
1 1 2 Company policy 1 5
1 1 3 Optional equipment 1 5
1 1 4 Spare parts and accessories 1 6
1 1 5 Warranty 1 6
1 1 6 Lubricants 1 6
1 2 Use 18
1 2 1 Use of the combine 1 8
1 3 Identification 19
1 3 1 Combine identification 1 9
1 3 2 Engine Identification 2 0
1 3 3 Cutting table identification 2 1
1 3 4 Cab identification 2 1
1 3 5 Hydrostatic pump identification 2 2
1 3 6 Hydrostatic motor identification 2 2
1 3 7 Straw chopper identification (if fitted) 2 3
1 3 8 Chaff spreader identification (if fitted) 2 3
1 3 9 Trailer hitch identification (if fitted) 2 4
1 4 Identification form 25
1 4 1 Machine data 2 5
1 5 Conformity 26
1 5 1 EC Declaration of Conformity 2 6
1 6 Information 27
1 6 1 Ecology 27
1 6 2 Hydraulic systems: hoses 27
1 6 3 Scrapping and disposal 2 8
1 7 Weight 29
1 7 1 Weight distribution 2 9
2 Safety 31
2 1 Warning symbols and safety instructions 33
2 1 1 Warnings 3 3
2 2 Information for road transport 34
2 2 1 Road transport 3 4
2 3 Information for operations 37
2 3 1 Field Operations 37
2 4 Information for maintenance 41
2 4 1 Maintenance work 4 1
2 5 Information on the engine 45
2 5 1 Engine 4 5
2 6 Safety and function decals 48
2 6 1 Location of decals 4 8
2 6 2 Description of decals 5 2
2 7 Work on the battery 62
2 7 1 Battery 6 2
2 8 Safety devices 63
2 8 1 Emergency exit 6 3
Combines
MF 7340_EN_LA327436012
Table of contents
2 8 2 Operator presence device 64
2 8 3 Safety belts 65
2 8 4 Table safety stops 66
2 8 5 Safety guard for main crop elevator 67
2 8 6 Safety Stop 67
2 8 7 Sprags for wheels 68
2 8 8 Audible alarm for reversing 69
2 8 9 Reflectors for road transport 70
2 8 10 Safety Guards 71
2 8 11 Fall protection rails 71
2 8 12 Safety devices for operations to be carried out in the upper part of the machine 72
2 8 13 Straw chopper 73
2 8 14 Fire extinguisher 73
2 9 Trailer hitch 74
2 9 1 Automatic towing hooks 74
2 9 2 CUNA and CE trailer hitches 75
2 9 2 1 Procedure for attaching and removing 76
2 9 2 2 Drawbar coupling 77
2 9 3 Fixed trailer hitch (non-automatic – CUNA type) 77
2 10 Machine lifting 78
2 10 1 Attachment points 78
2 11 Towing 79
2 11 1 Towing the combine 79
2 1 2 Further information 80
2 12 1 Noise level in the cab 8 0
2 12 2 Vibrations in the cab 8 0
2 12 3 Statutory regulations 8 0
2 12 4 Electromagnetic emissions 8 1
2 1 3 Notes 82
2 13 1 Notes for road transport 8 2
3 Operation 85
3 1 Combine operation 87
3 1 1 Crop processing 8 7
3 2 Stage 1 88
3 2 1 Feeding 8 8
3 3 Stage 2 89
3 3 1 Threshing 8 9
3 4 Stage 3 90
3 4 1 Separation 9 0
3 5 Stage 4 91
3 5 1 Cleaning 9 1
3 6 Stage 5 92
3 6 1 Grain storage and unloading 9 2
4 Controls and Instruments 93
4 1 Steering column 95
4 1 1 Components and adjustments 9 5
4 2 Multifunction lever 96
4 2 1 Main components 9 6
4 3 Instrument panel 97
4 3 1 Front control panel 9 7
4 3 2 Rear control panel 9 9
4 3 3 Multiple light indicators 103
4 3 4 On-board Computer 104
Combines
MF 7340_EN_LA327436012
Table of contents
4 3 4 1 Graphical user interface 1 06
4 3 4 2 Day/night mode 1 0 8
4 3 4 3 Operational parameters 1 09
4 3 4 4 Auto-calibration 1 09
4 3 4 5 Hectare counter 1 1 0
4 3 4 6 No communication 1 1 0
4 3 4 7 Alarm statuses 1 1 1
4 3 5 Performance monitor (on request) 1 1 1
4 3 5 1 Using the monitor 1 1 2
4 3 5 2 Selecting the measurement range (straw walker, sieves or total) 1 1 2
4 3 5 3 Calibrating the bar cursor scale 1 1 3
4 3 5 4 Sensitivity adjustment 1 1 3
4 3 5 5 Shifting to forward speed monitoring 1 1 4
4 3 5 6 Summary of keyboard functions 1 1 4
4 4 Description 11 5
4 5 Cab 1 1 6
4 5 1 Cab controls (top right-hand side) 1 1 6
4 5 2 Operator seat 1 19
4 5 3 Preparation for radio installation 1 2 0
4 5 4 Rear Cab Window 1 2 0
4 5 5 Reading light 1 2 1
4 5 6 Document Pocket 1 2 1
4 5 7 Air conditioning in the cab 1 2 2
4 5 7 1 Pressurization 1 2 3
4 5 8 Heating 12 4
4 6 Access to combine components 1 25
4 6 1 Access to the operator platform 1 2 5
4 6 2 Accessing and cleaning the front windscreen of the cab 1 2 6
4 6 3 Access to the engine compartment 1 2 7
4 6 4 Access to the grain tank 1 2 8
4 6 5 Access to the inside of the grain tank 1 29
4 7 Engine 1 30
4 7 1 Starting the engine 1 3 0
4 7 2 Useful advice 1 3 1
4 7 3 Stopping the engine 1 3 2
4 8 Road transport 1 33
4 8 1 Operations to be carried out before transportation 1 3 3
4 8 2 Position light and sidelight adjustment 1 3 4
4 9 Using the combine 1 35
4 9 1 Operations to be carried out before use 1 3 5
5 Field Operations 1 3 7
5 1 General Information 1 39
5 1 1 Notes 1 39
5 1 2 Before operating the machine in the field 1 3 9
5 2 Starting and Stopping the Combine 141
5 2 1 Procedure to follow 1 4 1
5 3 Cutting table 143
5 3 1 Attaching the cutting table 1 4 3
5 3 1 1 Adjustments for attaching the cutting table 1 4 5
5 3 2 Removing the table 1 4 6
5 3 3 Adjustment of cutting table ground clearance 1 4 7
5 4 Main Crop Elevator 148
Combines
5 4 1 Adjustments 1 4 8
5 4 1 1 Access to the main components 1 5 0
5 4 2 Reverse drive system 1 5 1
MF 7340_EN_LA327436012
Table of contents
5 5 Cylinder Housing 1 52
5 5 1 Components 1 5 2
5 5 2 Threshing drum 1 5 3
5 5 3 Wheat concave 1 5 4
5 5 3 1 Concave filler plates 1 5 5
5 5 3 2 Parallelism between the cylinder and concave 1 5 6
5 5 3 3 Unblocking the threshing drum 1 5 7
5 5 4 Sectional concave 1 58
5 5 4 1 Concave filler plates 1 5 9
5 5 4 2 Parallelism between the cylinder and concave 1 6 0
5 5 5 Universal wheat/maize concave 1 6 1
5 5 5 1 Basic concave settings 1 6 2
5 5 6 Spike-toothed Cylinder/Concave (for rice) 1 6 2
5 5 7 Rear beater 1 6 4
5 6 Straw walkers 1 65
5 6 1 Description and adjustments 1 6 5
5 7 Main Grain Pan 1 66
5 7 1 Description 1 6 6
5 7 2 Checking the main grain pan 1 6 7
5 7 3 Cleaning the main grain pan 1 68
5 7 4 Stone trap assembly removal/refitting 1 6 9
5 8 Fanning Mill 1 71
5 8 1 Description and adjustments 1 7 1
5 8 1 1 Fanning mill for threshing light seed crops 1 7 3
5 9 Top sieve 1 74
5 9 1 Adjustment 1 74
5 10 Bottom sieve 1 78
5 1 0 1 Adjustment 1 78
5 11 Tailings 1 80
5 1 1 1 Description and adjustments 18 0
5 1 2 Grain tank 1 82
5 1 2 1 Description 18 2
5 1 2 1 1 Grain tank unloading auger 18 3
5 1 2 1 2 Sensor to measure tank filling 18 4
5 1 2 1 3 Grain tank control window 18 4
5 1 2 1 4 Doors for Grain Tank Maintenance and Cleaning 18 5
5 1 2 1 5 Vertical auger tank drain door 18 6
5 1 2 1 6 Tank bottom door 18 7
5 1 2 1 7 Grain Tank Cover 188
5 1 2 1 8 Basic Settings 18 9
6 Lubrication and Maintenance 1 91
6 1 General Information 1 93
6 1 1 Lubrication and Maintenance 19 3
6 2 Preliminary Service Inspection 1 94
6 2 1 After the first 5 0 working hours 19 4
6 3 Scheduled Service Inspection 1 95
6 3 1 When and where to carry it out 19 5
6 3 2 Interval – 1 0 hours 19 7
6 3 2 1 Cylinder variator (1) 19 7
6 3 2 2 Engine oil (2) 198
6 3 2 3 Coolant expansion tank ( 3) 1 9 9
6 3 2 4 Hydraulic and hydrostatic systems tank (4) 1 9 9
6 3 2 5 Prefilter/water separator (5) 2 00
6 3 2 6 Straw chopper rotor (if fitted) (6) 2 00
6 3 3 Interval – 75 hours 2 01
Combines
MF 7340_EN_LA327436012
6 4
Combines
Table of contents
6 3 3 1 Service brakes (1 1) 2 01
6 3 3 2 Main crop elevator lower shaft (1 2) 2 01
6 3 3 3 Main crop elevator belt tensioner (1 3) 202
6 3 3 4 Fanning mill variator (1 4) 202
6 3 3 5 Crop-unloading auger drive belt tensioner (1 5) 2 0 3
6 3 3 6 Coupling bushes o f final drive shafts (1 6) 2 0 3
6 3 3 7 Rear axle support (1 7) 204
6 3 3 8 Rear axle king pins (1 8) 204
6 3 3 9 Rear straw-walker shaft supports (19) 205
6 3 3 1 0 Unloading auger bottom gearbox (2 0) 205
6 3 3 1 1 Unloading auger top gearbox (2 1) 2 06
6 3 3 1 2 Table drive-belt tensioner (2 2) 2 06
6 3 3 1 3 Track frames (2 3) 2 07
6 3 3 1 4 Cab air filters (2 4) 2 07
6 3 3 1 5 Evaporator (2 5) 2 09
6 3 3 1 6 Condenser (2 6) 2 09
6 3 3 1 7 Radiators and hydraulic oil (2 7) 2 1 0
6 3 3 1 8 Adjusting the rotary screen brushes and aspirator brushes 2 1 1
6 3 3 19 Chaff spreader drive (if fitted) (2 8) 2 1 2
6 3 4 Interval – 1 5 0 hours 2 1 3
6 3 4 1 Park brake (4 1) 2 1 3
6 3 4 2 Gearbox (4 2) 2 1 3
6 3 4 3 Final drives (4 3) 2 1 4
6 3 4 4 Unloading auger bottom gearbox (4 4) 2 1 4
6 3 4 5 Main crop elevator supports (4 5) 2 1 5
6 3 4 6 Reversing-belt tensioner-arm pin (4 6) 2 1 5
6 3 4 7 Main clutch (4 7) 2 1 6
6 3 4 8 Tailings-auger left support (4 8) 2 1 6
6 3 4 9 Windscreen wash fluid reservoir (4 9) 2 1 7
6 3 4 1 0 Threshing-mechanism belt tensioner (5 0) 2 1 7
6 3 4 1 1 Hydrostatic pump belt tensioner (5 1) 2 1 8
6 3 4 1 2 Unloading auger slewing ring (5 2) 2 1 8
6 3 4 1 3 Engine air filter (5 3) 2 19
6 3 4 1 4 Straw -chopper driven belt tensioner (5 4) 2 2 0
6 3 4 1 5 Straw chopper drive-belt tensioner (5 5) 2 2 0
6 3 4 1 6 Engine (5 6) 2 2 0
6 3 4 1 7 Straw chopper layshaft (5 7) 2 2 2
6 3 4 1 8 Return rotary-screen belt tensioner (5 8) 2 2 2
6 3 4 19 Rotary-screen belt tensioner (5 9) 2 2 3
6 3 4 2 0 Radiator-fan drive belt tensioner (6 0) 2 2 3
6 3 5 Interval – 2 2 5 hours 2 2 3
6 3 5 1 Engine oil and filters (7 1) 2 2 3
6 3 6 Interval – 4 5 0 hours 2 2 6
6 3 6 1 Battery (81) 2 2 6
6 3 6 2 Dehydrator filter (82) 2 2 7
6 3 6 3 Final drives (83) 2 2 8
6 3 6 4 Gearbox (84) 2 2 8
6 3 6 5 Hydraulic oil intake filter (85) 2 29
6 3 6 6 Hydrostatic transmission filter (86) 2 3 0
6 3 6 7 Hydraulic systems oil (87) 2 3 1
6 3 6 8 Hydraulic and hydrostatic system return filter (88) 2 3 3
6 3 6 9 Engine diesel-fuel filters (89) 2 3 3
6 3 6 1 0 Catalytic fluid filter (9 0) 2 3 5
Periodical maintenance operations 236
6 4 1 Description 2 3 6
6 4 1 1 Engine valves (1) 2 3 7
6 4 1 2 Coolant (2) 2 3 8
6 4 1 3 Service brake circuit fluid (3) 2 3 9
MF 7340_EN_LA327436012
Table of contents
6 4 1 4 Diesel fuel tank (4) 2 3 9
6 4 1 5 Turbocharger (5) 240
6 4 1 6 Hydraulic hoses (6) 240
6 4 1 7 Catalytic fluid tank (DE F) (7) 24 1
6 5 Lubrication 242
6 5 1 Summary table 242
7 Adjustments 243
7 1 Adjustments 245
7 1 1 Important information 245
7 2 Belt and chain adjustment 246
7 2 1 Belts and chains (left -hand side) 246
7 2 1 1 Feeder drive belt (1) 246
7 2 1 2 Threshing unit drive belt (2) 247
7 2 1 3 Unloading auger drive belt (3) 247
7 2 1 4 Hydrostatic pump drive belt (4) 248
7 2 1 5 Chaff spreader drive belt (if fitted) (5) 249
7 2 1 6 Reversing drive belt (6) 249
7 2 1 7 Main transmission belt (7) 2 5 0
7 2 1 8 Clean grain and tailings augers drive belt (8) 2 5 0
7 2 1 9 Straw walker drive belt (9) 2 5 1
7 2 1 1 0 Cutting table drive belt (1 0) 2 5 1
7 2 1 1 1 Unloading auger chain (1 1) 2 5 2
7 2 1 1 2 Straw chopper drive belt (if fitted) (1 2) 2 5 2
7 2 1 1 3 Straw chopper drive belt (if fitted) (1 3) 2 5 3
7 2 2 Belts and chains (right-hand side) 2 54
7 2 2 1 Belt drive for rotary screen (2 1) 2 54
7 2 2 2 Counter drive for rotary screen (22 ) 2 5 5
7 2 2 3 Drive belt for alternator and engine coolant pump (2 3) 2 5 5
7 2 2 4 Radiator fan drive belt (24) 2 5 6
7 2 2 5 Belt drive for cylinder variator (2 5) 2 5 6
7 2 2 6 Belt drive for fanning mill variator (2 6) 2 5 7
7 2 2 7 Top chain drive for tailings auger (2 7) 2 58
7 2 2 8 Tailings elevator chain (28) 2 58
7 2 2 9 Tank filling auger drive chain (29) 2 5 9
7 2 2 1 0 Crop elevator chain (3 0) 2 5 9
7 2 2 1 1 Front crop-elevator chain (3 1) 2 6 0
7 2 2 1 2 Cab air-conditioning compressor drive belt (3 2) 2 6 0
7 2 2 1 3 Dust aspirator drive belt (3 3) 2 6 1
7 3 Slip clutches 262
7 3 1 Description 2 6 2
7 3 1 1 Clutch for main crop elevator upper shaft (1) 2 6 2
7 3 1 2 Clutch for shaker shoe counter drive (2) 2 6 2
7 3 1 3 Shear bolt for unloading auger counter drive (3) 2 6 3
7 4 T ires 264
7 4 1 T ire pressure 2 64
7 4 2 Replacement of Front Wheels 2 6 5
7 4 3 Replacement of Rear Wheels 2 6 6
7 4 4 Front wheel assembly 2 6 7
7 4 5 Rear wheel assembly 2 68
7 5 Brakes 269
7 5 1 Service brakes 2 6 9
7 5 2 Park brake 2 70
7 6 Rear axle 271
7 6 1 Toe-in setting 2 7 1
7 6 2 Steering ram ball joints 2 7 1
7 6 3 Rear axle support 272
Combines
MF 7340_EN_LA327436012
7 7
Table of contents
Battery 273
7 7 1 Battery Replacement 27 3
7 7 2 Suggestions regarding the battery 27 3
7 7 3 Indicator Light for Battery Charging 2 74
8 Systems 275
8 1 Safety Precautions 277
8 1 1 Notes 277
8 2 Engine supply system 278
8 2 1 Permitted fuels 27 8
8 2 2 Fuel Circuit 27 9
8 2 3 Bleeding the Fuel Supply Circuit 2 8 0
8 2 4 Catalytic fluid tank ( D EF) 2 8 1
8 2 5 Injection system operation 2 8 3
8 3 Engine air intake and exhaust system 284
8 3 1 Operation 2 8 4
8 4 Engine cooling system 286
8 4 1 Coolant 2 8 6
8 4 2 Engine cooling system operation 2 8 7
8 5 Engine lubrication system 288
8 5 1 Operation 2 8 8
8 5 2 Oil vapor recovery system 2 8 9
8 6 SCR system 290
8 6 1 Operation 2 9 0
8 7 Hydraulics system 292
8 7 1 Pumps and fuel tank 2 9 2
8 7 2 Table positioning hydraulic circuits 2 9 3
8 7 2 1 Cutting table oleopneumatic shock absorber 2 9 4
8 7 2 2 Hose burst valve 2 9 4
8 7 2 3 Cutting table positioning pressure switch 2 9 5
8 7 3 Hydraulic steering system 2 9 6
8 7 4 Auxiliary hydraulics circuit 2 9 7
8 8 Hydrostatic transmission system 298
8 8 1 Front-wheel drive 2 9 8
8 9 Electrical system 299
8 9 1 Main components 2 9 9
8 9 2 Fuses 3 0 0
8 9 3 Additional fuses 3 0 3
8 9 4 Cab fuses 3 0 5
8 9 5 Relays 3 0 6
8 9 5 1 Additional relays 3 0 8
8 9 5 2 Various relays 3 0 9
8 9 6 Control units 3 1 0
8 9 6 1 Engine sensors and control unit 3 1 1
8 9 7 Connections for additional equipment 3 1 2
8 9 7 1 Electric connectors 3 1 2
8 9 8 Headlight adjustment 3 1 4
8 9 9 Unloading area light 3 1 5
8 9 1 0 Reversing area light 3 1 5
8 9 1 1 Light in grain tank 3 1 6
8 9 1 2 Engine access-ladder light 3 1 6
9 Troubleshooting 317
9 1 Description 319
9 1 1 Feeding 3 1 9
9 1 2 Threshing 3 1 9
Combines
MF 7340_EN_LA327436012
Table of contents
9 1 3 Separation and cleaning 3 2 1
9 1 4 Hydrostatic Transmission 3 2 4
9 1 5 Engine 3 2 5
9 1 6 Hydraulics system 3 2 7
9 1 7 Electrical system 3 2 8
9 1 8 Air conditioning circuit 3 29
9 1 9 Straw chopper 3 29
1 0 Off-Season Storage 333
1 0 1 Proced u re to fol l ow 335
1 0 1 1 Operations to be carried out after the harvest 3 3 5
1 0 1 2 Ordering spare parts 3 3 6
1 0 1 3 Operations to be carried out before the new season 3 3 6
1 1 Optio n a l eq u i p m ent 339
1 1 1 I nform ation 341
1 1 1 1 General considerations 3 4 1
1 1 2 Optional eq u i p m ent 342
1 1 2 1 Auxiliary table lifting ram 3 4 2
1 1 2 2 Camera 3 4 3
1 1 2 3 Additional rear view mirrors 3 4 3
1 1 2 4 Additional lights (for work) 3 4 4
1 1 2 5 Performance monitor 3 4 4
1 1 2 6 Windbreak 3 4 5
1 1 2 7 Additional fire extinguisher 3 4 5
1 1 2 8 Diesel fuel prefilter 3 4 6
1 1 2 9 Additional Portable Lamp 3 4 6
1 1 2 1 0 Weight and moisture control monitor 3 4 7
1 1 2 1 1 Trailer hitch 3 4 7
1 1 2 1 2 Refrigerator 3 4 8
1 1 2 1 3 Cylinder cover 3 4 8
1 1 2 1 4 Tailings cover plate 3 4 9
1 1 2 1 5 Top sieve 3 4 9
1 1 2 1 6 Bottom sieve 3 5 0
1 1 2 1 7 Electrically-operated sieves and returns sensors 3 5 1
1 1 2 1 8 Cutting height control 3 5 2
1 1 2 19 Hydraulic quick couplers 3 5 2
1 1 3 Equipm ent for t h res h i n g 353
1 1 3 1 Equipment for maize 3 5 3
1 1 3 2 Equipment for corn-cob 3 5 4
1 1 3 3 Equipment for rice 3 5 5
1 1 3 4 Equipment for light seed crops 3 5 5
1 1 3 5 Equipment for soya and peas 3 5 6
1 1 4 Ba l last weig hts 357
1 1 4 1 Description 3 5 7
1 1 4 2 Ballast weights on rear axle 3 5 7
1 1 4 3 Ballast weights on the straw walker hood for machines without straw chopper 3 5 8
1 1 4 4 Ballast weights on the rear wheels with a liquid mix (for tubeless tires) 3 5 9
1 1 4 5 Filling tires with anti-freeze solutions 3 6 0
1 1 5 Straw chopper 361
1 1 5 1 Transport position 3 6 1
1 1 5 2 Working position 3 6 2
1 1 5 3 Operating the straw chopper 3 6 3
1 1 5 4 Disengaging the straw chopper 3 6 5
1 1 5 5 Access to the straw chopper rotor 3 6 5
1 1 5 6 Straw chopper rotor knives 3 6 5
1 1 5 7 Counter-knives 3 6 6
Combines
MF 7340_EN_LA327436012
Table of contents
1 1 5 8 Chopping quality 3 6 6
1 1 5 9 Use of straw chopper in maize 3 6 8
1 1 6 Chaff Spreader 370
1 1 6 1 Working and maintenance positions 3 70
1 1 6 2 Chaff spreader speed 3 72
1 1 6 3 Disengaging the chaff spreader 3 72
1 1 6 4 Chaff spreader belt tensioning 3 72
1 1 7 Tracks 373
1 1 7 1 Use and maintenance 3 7 3
1 1 7 2 Track chain tension 3 74
1 2 Technical Specifications 375
1 2 1 Wheels and tires 377
1 2 1 1 information 3 77
1 2 1 2 Wheel tightening torque 3 77
1 2 1 3 T ire capacity 3 77
1 2 1 4 T ire equipment- front axle 3 7 8
1 2 1 5 T ire equipment – rear axle 3 79
1 2 1 6 T ire equipment – Version with half-tracks on front axle 3 80
1 2 2 Dimensions 381
1 2 2 1 Combine dimensions 3 81
1 2 2 2 Tracks with runners 3 83
1 2 2 3 Clearance between unloading auger and table 3 84
1 2 2 4 Available cutting tables and weights 3 84
1 2 2 5 Clearance between unloading auger and ground 3 85
1 2 3 Technical specifications 386
1 2 3 1 Feeding unit 3 86
1 2 3 2 Threshing sys 3 86
1 2 3 3 Cleaning unit 3 88
1 2 3 4 Grain tank 3 89
1 2 3 5 Hydraulic system 3 9 0
1 2 3 6 Hydrostatic system 3 9 0
1 2 3 7 Engine 3 9 0
1 2 3 8 Electrical components 3 9 1
1 2 3 9 Transmission 3 9 1
1 2 3 1 0 Rear axle 3 9 2
1 2 3 1 1 Weight 3 9 2
1 3 Index 393
VIDEO PREVIEW OF THE MANUAL:
IMAGES PREVIEW OF THE MANUAL:
PLEASE NOTE:
- This is not a physical manual but a digital manual – meaning no physical copy will be couriered to you. The manual can be yours in the next 2 mins as once you make the payment, you will be directed to the download page IMMEDIATELY.
- This is the same manual used by the dealers inorder to diagnose your vehicle of its faults.
- Require some other service manual or have any queries: please WRITE to us at [email protected]
S.V