Linkbelt 210LX Crawler Excavator Service Manual (1032) – PDF DOWNLOAD
FILE DETAILS:
Linkbelt 210LX Crawler Excavator Service Manual (1032) – PDF DOWNLOAD
Language : English
Pages : 600
Downloadable : Yes
File Type : PDF
IMAGES PREVIEW OF THE MANUAL:
DESCRIPTION:
Linkbelt 210LX Crawler Excavator Service Manual (1032) – PDF DOWNLOAD
GENERAL INFORMATION
Cleaning
Clean all metal parts except bearings, in a suitable cleaning solvent or by steam cleaning. Do not use caustic soda for steam cleaning. After cleaning, dry and put oil on all parts. Clean oil passages with compressed air. Clean bearings in a suitable cleaning solvent. Dry the bearings completely and put oil on the bearings.
Inspection
Check all parts when the parts are disassembled. Replace all parts that have wear or damage. Small scoring or grooves can be removed with a hone or crocus cloth. Complete a visual inspection for indications of wear, pitting and the replacement of parts necessary to prevent early failures.
Bearings
Check bearings for easy action. If bearings have a loose fit or rough action, replace the bearing. Wash bearings with a suitable cleaning solvent and permit to air dry. DO NOT DRY BEARINGS WITH COMPRESSED AIR.
Needle Bearings
Before you press needle bearings in a bore always remove any metal protrusions in the bore or edge of the bore. Before you press bearings into position, put petroleum jelly on the inside and outside diameter of the bearings.
Gears
Check all gears for wear and damage. Replace gears that have wear or damage.
Oil Seals, O-rings and Gaskets
Always install new oil seals, O-rings and gaskets. Put petroleum jelly on seals and O-rings.
Shafts
Check all shafts that have wear or damage. Check the bearing and oil seal surfaces of the shafts for damage.
Service Parts
Always install genuine Link-Belt service parts. When ordering refer to the Parts Catalog for the correct part number of the genuine Link-Belt replacement items. Failures due to the use of other than genuine Link- Belt replacement parts are not covered by warranty.
Lubrication
Only use the oils and lubricants specified in the Operator’s or Service Manuals. Failures due to the use of non-specified oils and lubricants are not covered by warranty.
TABLE OF CONTENTS:
Linkbelt 210LX Crawler Excavator Service Manual (1032) – PDF DOWNLOAD
6004.pdf.......................................................... 0 Description 4................................................. 47 4001.pdf.......................................................... 0 General Location of Components (Outside the Cab) 6............ 0 Relays and Main Fuses (Battery Compartment) 8................. 0 General Location of Components (Inside the Cab) 9............. 0 Fuse Box 11................................................... 0 Instrument Panel 12........................................... 0 H/S/L Mode Control 17......................................... 0 Automatic Mode Control 18..................................... 0 Acceleration Control 19....................................... 0 Control of Engine Return to Idle (Automatic/Manual) 20........ 0 Auxiliary Mode Control 21..................................... 0 Automatic Engine Pre-heat 22.................................. 0 Automatic Engine Warm-up 25................................... 0 3) Diagram showing times 26................................... 0 Idle Control by Battery Voltage and Coolant Temperature 27.... 0 Engine Emergency Stop 29...................................... 0 Emergency Mode 31............................................. 0 Lockout Functions 33.......................................... 0 Power Up 34................................................... 0 Swing Brake 35................................................ 0 Travel Speed 39............................................... 0 Travel Alarm 42............................................... 0 Supply Cut-Off Delayed 43..................................... 0 Protection by Power Transistor 44............................. 0 Water Temperature Gauge 44.................................... 0 Hydraulic Oil Temperature Gauge 46............................ 0 Fuel Level 47................................................. 0 Engine Fuel Injection Pump Electronic Regulator 48............ 0 Access to Control Screens 50.................................. 0 Machine Condition 51.......................................... 0 Diagnostic Code 55............................................ 0 Machine History 58............................................ 0 Reset 61...................................................... 0 Message Display 64............................................ 0 Prior Inspections 68.......................................... 0 Reading the Organization Charts 69............................ 0 Procedures 70................................................. 0 Fuel 71....................................................... 0 Add Coolant Solution 72....................................... 0 Low Engine Oil Pressure 73.................................... 0 Overheating 74................................................ 0 Battery Charge Circuit Defective 77........................... 0 Electrical System Troubleshooting 79.......................... 0 Translation 83................................................ 0 5001.pdf.......................................................... 0 Description 4................................................. 0 Checking pin and bushing wear 12.............................. 0 5005.pdf.......................................................... 0 Description 8................................................. 0 Reconditioning 8.............................................. 0 Description 14................................................ 0 Description 16................................................ 0 Removal 16.................................................... 0 Notes.........................................................130 6003.pdf.......................................................... 0 Removal 3..................................................... 0 Installation 4................................................ 0 8003.pdf.......................................................... 0 Removal and installation 4.................................... 0 Removal and installation 9.................................... 0 Removal and installation 11................................... 0 Notes......................................................... 0 8005.pdf.......................................................... 0 Description 3................................................. 0 Description 9................................................. 0 8006.pdf.......................................................... 0 Removal and installation 3.................................... 0 8008.pdf.......................................................... 0 Notes......................................................... 36 8012.pdf.......................................................... 0 Boom cylinder description 4................................... 0 Arm cylinder description 6.................................... 0 Bucket cylinder description 8................................. 0 8014.pdf.......................................................... 0 NOTES......................................................... 0 9003.pdf.......................................................... 0 Removal 4..................................................... 0 Installation 4................................................ 0 Shimming the bucket 6......................................... 0 Removal 8..................................................... 0 Installation 8................................................ 0 Removal 11.................................................... 0 Installation 12............................................... 0 4001.pdf.......................................................... 0 General Location of Components (Outside the Cab) 6............ 0 Relays and Main Fuses (Battery Compartment) 8................. 0 General Location of Components (Inside the Cab) 9............. 0 Fuse Box 11................................................... 0 Instrument Panel 12........................................... 0 H/S/L Mode Control 17......................................... 0 Automatic Mode Control 18..................................... 0 Acceleration Control 19....................................... 0 Control of Engine Return to Idle (Automatic/Manual) 20........ 0 Auxiliary Mode Control 21..................................... 0 Automatic Engine Pre-heat 22.................................. 0 Automatic Engine Warm-up 25................................... 0 3) Diagram showing times 26................................... 0 Idle Control by Battery Voltage and Coolant Temperature 27.... 0 Engine Emergency Stop 29...................................... 0 Emergency Mode 31............................................. 0 Lockout Functions 33.......................................... 0 Power Up 34................................................... 0 Swing Brake 35................................................ 0 Travel Speed 39............................................... 0 Travel Alarm 42............................................... 0 Supply Cut-Off Delayed 43..................................... 0 Protection by Power Transistor 44............................. 0 Water Temperature Gauge 44.................................... 0 Hydraulic Oil Temperature Gauge 46............................ 0 Fuel Level 47................................................. 0 Engine Fuel Injection Pump Electronic Regulator 48............ 0 Access to Control Screens 50.................................. 0 Machine Condition 51.......................................... 0 Diagnostic Code 55............................................ 0 Machine History 58............................................ 0 Reset 61...................................................... 0 Message Display 64............................................ 0 Prior Inspections 68.......................................... 0 Reading the Organization Charts 69............................ 0 Procedures 70................................................. 0 Fuel 71....................................................... 0 Add Coolant Solution 72....................................... 0 Low Engine Oil Pressure 73.................................... 0 Overheating 74................................................ 0 Battery Charge Circuit Defective 77........................... 0 Electrical System Troubleshooting 79.......................... 0 Translation 83................................................ 0 5001.pdf.......................................................... 0 Description 4................................................. 0 Checking pin and bushing wear 12.............................. 0 5005.pdf.......................................................... 0 Description 8................................................. 0 Reconditioning 8.............................................. 0 Description 14................................................ 0 Description 16................................................ 0 Removal 16.................................................... 0 Notes.........................................................130 6003.pdf.......................................................... 0 Removal 3..................................................... 0 Installation 4................................................ 0 6004.pdf.......................................................... 0 Description 4................................................. 47 8003.pdf.......................................................... 0 Removal and installation 4.................................... 0 Removal and installation 9.................................... 0 Removal and installation 11................................... 0 Notes......................................................... 0 8005.pdf.......................................................... 0 Description 3................................................. 0 Description 9................................................. 0 8006.pdf.......................................................... 0 Removal and installation 3.................................... 0 8008.pdf.......................................................... 0 Notes......................................................... 36 8012.pdf.......................................................... 0 Boom cylinder description 4................................... 0 Arm cylinder description 6.................................... 0 Bucket cylinder description 8................................. 0 8014.pdf.......................................................... 0 NOTES......................................................... 0 9003.pdf.......................................................... 0 Removal 4..................................................... 0 Installation 4................................................ 0 Shimming the bucket 6......................................... 0 Removal 8..................................................... 0 Installation 8................................................ 0 Removal 11.................................................... 0 Installation 12............................................... 0
VIDEO PREVIEW OF THE MANUAL:
s.s