Liebherr A 916 Compact Litronic 1856 Wheeled Excavator Operator’s Manual SN 112562 – PDF DOWNLOAD
FILE DETAILS:
Liebherr A 916 Compact Litronic 1856 Wheeled Excavator Operator’s Manual SN 112562 – PDF DOWNLOAD
Language : English
Pages : 398
Downloadable : Yes
File Type : PDF
DESCRIPTION:
Liebherr A 916 Compact Litronic 1856 Wheeled Excavator Operator’s Manual SN 112562 – PDF DOWNLOAD
Product ID
Manufacturer: Liebherr-Hydraulilkbagger GmbH
Type: A 916 Compact Litronic
Type no.: 1856
From Serial no.: 112562
Preface:
- This operating manual is intended for you as the machine operator or as a member of the maintenance personnel. It contains warnings, important information and tips for working with the machine. It simplifies the process of familiarisation and getting to know the machine, and helps to avoid faults caused by incorrect operation.
- Compliance with the operating manual increases the reliability and service life of the machine.
- The operating manual must be kept with the machine. Make sure that a copy is always kept close to hand at the workplace.
- Read the operating manual before initial commissioning and subsequently at regular intervals. Everyone who carries out work with or on the machine must be familiar with and use this operating manual.
Examples of this work:
– Operation including setup and fitting attachments, elimination of faults, care,
disposal of service products and consumables
– Maintenance including servicing, inspection and repair
– Transporting or loading the machine
- The owner is responsible for supplementing the operating manual with instructions based on existing national regulations on accident prevention and environmental protection. In addition to this operating manual and the regulations on accident prevention applicable in the user’s country and at the place of use, it is also necessary to comply with the recognised technical rules on safety and technically proficient working.
- Some sections of this operating manual do not apply to all machines.
- Some illustrations in this operating manual may show details and implements that are different from your machine.
- In some illustrations, protective devices and covers have been removed to provide a clearer representation.
- Liebherr machines are subject to continuous development and improvement. This may have resulted in modifications to your machine which are possibly not referred to in this operating manual.
- If you require further explanations or information, please contact Liebherr customer service.
Liability and warranty:
- Due to the wide variety of products offered by other manufacturers (e.g. service products, lubricants, tool attachments and spare parts), Liebherr cannot examine the general suitability and absence of defects in third-party products which are used in or on Liebherr products. The same applies to possible interactions between third-party products and Liebherr products.
- Third-party products are used in or on Liebherr machines at the user’s own discretion.
Liebherr does not offer any warranty or accept any liability for losses of anykind caused by failures of or damage to Liebherr machines attributable to the use of third-party products. - Furthermore, Liebherr will not recognise any warranty claims attributable to incorrect operation, inadequate maintenance or the failure to follow safety instructions.
Modifications, conditions, copyright:
- Liebherr reserves the right to make modifications in the course of technical development, without issuing prior notification.
- Information and illustrations in these instructions are not allowed to be duplicated, distributed or used for the purposes of competing with Liebherr. All rights under copyright legislation are expressly reserved.
- The aforementioned provisions do not extend the warranty and liability conditions in the general terms and conditions of business of Liebherr.
TABLE OF CONTENTS:
Liebherr A 916 Compact Litronic 1856 Wheeled Excavator Operator’s Manual SN 112562 – PDF DOWNLOAD
1.1 Technical description 19
1.1.1 General overview 19
1.2 Technical data 20
1.2.1 Vibration emission 20
1.22 CO2 emissions of diesel engine 20
1.2.3 Sound level 22
1.2.4 Specifications 23
2 Safety warnings 25
2.1 Information on these instructions 25
21.1 Representation of warning messages 25
21.2 Graphic symbols in these instructions 25
2.2 Intended use 26
2.21 Laws, rules, guidelines and safety regulations 26
2.2.2 Intended use 26
2.2.3 Foreseeable misuse 27
2.2.4 Operating conditions 27
2.2.5 Disposal 28
2.3 Description of staff 29
2.3.1 Personal protective equipment 29
2.3.2 Requirements for staff 29
2.3.3 Operating company 30
2.3.4 Operator 30
2.3.5 Maintenance staff 31
2.3.6 Electrical engineer 32
2.3.7 Refrigeration technician 33
2.3.8 Slinger 33
2.3.9 Spotter 34
2.41 Warning signs 35
2.5.1 Safety lever or folding console 44
2.6.1 Emergency exit (standard) 46
2.7.1 Intoxicants 47
2.7.10 Demolition work 54
2.8.1 Spare parts 55
2.9.1 Modifications, add-ons and retrofittings 56
3.1 Control and operating elements 57
3.1.1 Overview of operator’s platform 57
3.1.2 Control unit A 58
3.1.3 Control unit B 59
3.1.4 Control unit C 59
3.1.5 Further control units 60
3.1.6 Symbols on control description sticker 60
3.1.7 General symbols 60
3.1.8 Control changeover 61
3.1.9 Optional equipment 62
3.1.10 Working tools 62
3.1.11 Working attachment 64
3.1.12 Support 65
3.1.13 Height-adjustable cab 66
3.1.14 Wheeled excavator travel mode 66
3.1.15 Crawler excavator travel mode 67
3.1.16 Rail excavator travel mode 67
3.2.1 Display 68
3.2.2 Status symbols 69
3.2.3 Start page menu 82
3.2.4 Camera menu 83
3.2.5 Automatic heating and automatic ventilation 84
3.2.6 Automatic air conditioning 88
3.2.7 Operating status menu 91
3.2.8 Diesel particulate filter submenu (option) 92
3.2.9 Sensor-controlled low idle automatic and automatic engine stop
3.2.11 Operating hour meter and odometer submenu 95
3.2.12 Windscreen wiper interval submenu 95
3.2.13 Radio remote control submenu 96
3.2.14 Display settings submenu 97
3.2.15 Display brightness and display volume submenu 97
3.2.16 Camera image contrast submenu 98
3.2.17 Camera return time submenu 98
3.2.18 Regional settings and system parameters submenu 99
3.2.20 System diagnosis submenu 100
3.2.21 Time zone submenu 100
3.2.22 Time format and date format submenu 101
3.2.23 Language selection submenu 101
3.2.24 Electrical outputs submenu 102
3.2.25 Electrical inputs submenu 103
3.2.26 Function settings menu 103
3.2.27 Central lubrication system submenu (option) 105
3.2.28 Maintenance submenu 105
3.2.29 SF submenu 107
3.2.30 User profile submenu 109
3.2.31 Stick cylinder shut-off and hoist cylinder shut-off submenu (option) 110
3.2.32 Workspace limitation submenu (option) 110
3.2.33 Automatic reversible fan drive submenu (option) 11
3.2.34 Comfort slewing brake submenu (option) 112
3.2.35 Bleeding hydraulic circuit submenu 112
3.2.36 Information menu 113
3.2.37 Operating time submenu 114
3.2.38 Fuel consumption submenu 114
3.2.39 Key assignment submenu 115
3.2.40 Tool Control menu 115
3.2.41 Service codes menu 116
Control 118
3.3.1 Battery main switch 118
3.3.2 Entering and exiting machine 119
3.3.3 Emergency exit 121
3.3.4 Fire extinguisher (option) 121
3.3.5 Folding console 122
3.3.6 Operator’s seat 123
3.3.7 Safety belt 131
3.3.8 Steering wheel 132
3.3.9 Ignition key 133
3.3.10 Confirmation button 133
3.3.11 Horn 134
3.3.13 Sun blind 137
3.3.14 Viewing devices 138
3.3.15 Lighting 144
3.3.16 Cab lighting system 145
3.3.17 Windshield wipers 146
3.3.18 Windscreen washer system 146
3.3.19 Auxiliary heater (option) 147
3.3.20 LiDAT (option) 147
3.4 Operation 149
3.4.1 Inspection tour before putting into service 149
3.4.2 Refuelling 150
3.4.3 Refuelling with electric refuelling pump (option) 150
34.4 Filling with diesel exhaust fluid 152
3.4.5 Immobiliser (option) 162
3.4.6 Preparing machine for dust intensive application 154
3.47 Preparing machine for use in biologically sensitive areas 154
3.4.8 Starting diesel engine 155
3.4.9 Bringing machine to operating temperature 165
3.4.10 Engine speed and operating mode 156
3.4.11 After starting 158
3.4.12 Sensor-controlled low idle automatic 159
3.4.13 Automatic engine stop after idling (option) 159
3.4.14 Shutting off diesel engine 160
3.4.15 Shutting off diesel engine in an emergency 161
3.4.16 Travelling and braking 161
3.4.17 Speed controller 164
3.4.18 Automatic service brake 165
3.4.19 Joystick steering 167
3.4.20 Travel alarm (option) 168
3.4.21 Ride control (option) 169
3.4.22 Locking and unlocking oscillating axle 171
3.4.23 Supporting machine 173
3.4.24 Controlling working attachment 175
3.4.25 Turning and braking uppercarriage 177
copyright © Liebherr-Hydraulikbagger GmbH 2019
Contents Operator’s manual
3.4.26 Slewing brake 178
3.4.27 Positioning slewing brake 183
3.4.28 Selecting boom or working tool 183
3.4.29 Laterally adjusting boom 184
3.4.30 Selecting the working tool 184
3.4.31 Controlling special working attachment with mini-joystick 185
3.4.32 Using working tool in continuous mode (option) 186
3.4.33 Changing over control of right mini-joystick (option) 188
3.4.34 Reversible fan drive for radiator cleaning (option) 190
3.5.1 Stick cylinder shut-off (option) 192
3.6.1 Working without damaging the machine 21
3.6.10 Loading transport vehicle 224
3.6.12 Lifting loads with quick coupler 226
3.6.13 Driving technique 227
3.6.14 Use of banksmen 227
3.7.1 Using quick coupler 228
3.9 Transport 230
3.9.1 Preparatory work 230
14 LIEBHERR A 816 Compact Litronic – 1856 / 112562
LHB/M2249386/01/2019-10-21/en
3.9.4 Tying down the machine 232
3.10 Emergency operation 234
3.10.1 Jump starting 234
3.10.2 Lowering working attachment when engine is shut off 235
3.10.3 Towing 235
3.10.4 Transmission 238
4 Malfunctions 241
4.1 Service code tables 241
41.1 Warning symbols 241
4.2 Fault – Cause – Remedy 248
421 Diesel engine and fuel system 248
4.22 Hydraulic system 251
4.2.3 Electrical system 252
4.2.4 Heating, ventilation and air conditioning unit 252
42,5 Working attachment 252
4.3 Problem remedy 254
4.3.1 Fuses and relays in the uppercarriage 254
4.3.2 Operator’s platform fuses and relays 260
5 Maintenance 267
5.1 Inspection and maintenance schedule 267
5.2 Filling quantities and lubrication chart 272
5.2.1 Filling quantities 272
5.2.2 Lubrication chart 273
5.3 Fuels, lubricants and operating fluids 277
5.3.1 General information about lubricants and fuels 277
53.2 Diesel fuels 277
5.3.3 Diesel exhaust fluids 278
5.3.4 Engine oils 279
5.3.5 Refrigerant 280
5.3.6 Coolant 281
5.3.7 Hydraulic oils 282
5.3.8 Axle oils 284
5.3.10 Transmission oils 285
5.3.11 Greases 285
5.3.12 Windscreen washer fluid 286
5.3.13 Lubricants and care products for electrical and mechanical systems 286
Access points for maintenance work 287
5.4.1 Access points on uppercarriage 287
5.4.2 Access points under the uppercarriage 288
Preparing for maintenance 289
5.5.1 Maintenance procedures 289
5.5.2 Preparing for maintenance 290
5.5.3 Putting machine in maintenance position 292
General maintenance 293
56.1 Welding 293
5.6.2 Corrosion-proofing piston rods 293
5.6.3 Cleaning the machine 294
5.6.4 Cleaning the fan and radiator 296
Complete machine 297
5.7.1 Checking machine for proper condition and tightness 297
5.7.2 Lubricating bearings on machine and working attachment 301
5.7.3 Checking components for cracks 303
5.7.4 Lubricating hinges, locks and gas pressure springs of doors, hoods and
windows 304
5.7.5 Filling in sample data sheet 304
Drive group 310
5.8.1 Diesel engine: Bringing into maintenance position 310
5.8.2 Diesel engine: Checking oil level 310
5.8.3 Diesel engine: Checking breather line of crankcase 3N
5.8.4 Fuel pre-filter: Draining water 313
5.8.5 Fuel tank: Draining water and sediments 313
5.8.6 Air filter: Emptying dust collecting tank 315
5.8.7 Air filter: Replacing main filter cartridge 315
5.8.8 Air filter: Replacing safety filter cartridge 317
5.8.9 Diesel particulate filter: Activating and deactivating regeneration 318
5.8.10 Diesel exhaust fluid tank: Cleaning sieve 324
5.10.5 Bypass filter (option): Checking degree of contamination of filter
6.1 Optional equipment 353
6.1 Working tools 353
6.1 Working attachment 355
6.1 Support 357
6.1 Height-adjustable cab 357
6.1 Wheeled excavator travel mode 358
6.1 Crawler excavator travel mode 358
6.1 Rail excavator travel mode 359
Index 361
IMAGES PREVIEW OF THE MANUAL:
VIDEO PREVIEW OF THE MANUAL:
PLEASE NOTE:
- This is the SAME exact manual used by your dealers to fix your vehicle.
- The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
- Any queries / doubts regarding your purchase, please feel free to contact [email protected]
S.V