KOMATSU PC130-8 HYDRAULIC EXCAVATOR OPERATION & MAINTENANCE MANUAL (SN:82503 & UP) KOMATSU PC130-8
VIDEO PREVIEW:
IMAGE PREVIEW:
DESCRIPTION:
KOMATSU PC130-8 HYDRAULIC EXCAVATOR OPERATION & MAINTENANCE MANUAL (SN:82503 & UP) KOMATSU PC130-8
- This manual gives details of the operation and methods of inspection and maintenance for this machine that must be obeyed in order to use the machine safely. Most accidents are caused by the failure to follow fundamental safety rules for the operation and maintenance of machines. Read, understand and follow all precautions and warnings in this manual and on the machine before performing operation and maintenance.
- Failure to do so may result in serious injury or death. Komatsu cannot predict every circumstance that might involve a potential hazard when the machine is used. Therefore, the safety messages in this manual and on the machine may not include all possible safety precautions. If you carry out any operation, inspection, or maintenance under conditions that are not described in this manual, understand that it is your responsibility to take the necessary precautions to ensure safety.
- In no event should you or others engage in the prohibited uses or actions described in this manual. Improper operation and maintenance of the machine can be hazardous and could result in serious injury or death. If you sell the machine, be sure to give this manual to the new owner together with the machine. Always keep this Operation and Maintenance Manual in the location shown on the right so that all relevant personnel can read it at any time.
- Storage location for the Operation and Maintenance Manual: magazine box on the left side of the operator’s seat. If this manual is lost or damaged, contact your distributor immediately to arrange for its replacement. For details regarding the machine serial No. you will need to provide your Komatsu distributor, see “YOUR MACHINE SERIAL NUMBERS AND DISTRIBUTOR (PAGE 1-6)”. This manual uses the international units (SI) for units of measurement.
- For reference, units that have been used in the past are given in ( ). The explanations, values, and illustrations in this manual have been prepared based on the latest information available as of the date of its publication. Continuing improvements in the design of this machine may lead to additional changes that are not reflected in this manual. Consult Komatsu or your Komatsu distributor for the latest available information concerning your machine or with questions regarding information contained in this manual.
- The numbers in circles in the illustrations correspond to the numbers in ( ) in the text. (For example:1 → (1)) Komatsu delivers machines that comply with all applicable regulations and standards of the country to which it has been shipped. If this machine has been purchased in another country, it may lack certain safety devices and specifications that are necessary for use in your country. If there is any question about whether your product complies with the applicable standards and regulations of your country, consult Komatsu or your Komatsu distributor before operating the machine.
TABLE OF CONTENTS:
KOMATSU PC130-8 HYDRAULIC EXCAVATOR OPERATION & MAINTENANCE MANUAL (SN:82503 & UP) KOMATSU PC130-8
COVER ......................................................................................... 1 FOREWORD ...................................................................................... 2 BEFORE READING THIS MANUAL................................................................. 3 SAFETY INFORMATION......................................................................... 4 INTRODUCTION............................................................................... 5 USE OF MACHINE......................................................................... 5 DIRECTIONS OF MACHINE.................................................................. 5 VISIBILITY FROM OPERATOR'S SEAT........................................................ 5 PROTECTIVE STRUCTURE................................................................... 5 PRODUCT INFORMATION........................................................................ 6 PRODUCT IDENTIFICATION NUMBER (PIN)/MACHINE SERIAL NO. PLATE........................... 6 EPA REGULATIONS, ENGINE NUMBER PLATE................................................... 6 SERVICE METER LOCATION................................................................. 7 YOUR MACHINE SERIAL NUMBERS AND DISTRIBUTOR............................................ 7 CONTENTS................................................................................... 8 SAFETY ........................................................................................ 12 SAFETY..................................................................................... 13 SAFETY LABELS.............................................................................. 16 LOCATION OF SAFETY LABELS.............................................................. 17 SAFETY LABELS.......................................................................... 18 GENERAL PRECAUTIONS COMMON TO OPERATION AND MAINTENANCE.................................... 24 PRECAUTIONS BEFORE STARTING OPERATION.................................................. 24 PREPARATIONS FOR SAFE OPERATION........................................................ 24 FIRE PREVENTION........................................................................ 26 PRECAUTIONS WHEN GETTING ON OR OFF MACHINE............................................. 27 DO NOT GET CAUGHT IN WORK EQUIPMENT.................................................... 29 PRECAUTIONS RELATED TO PROTECTIVE STRUCTURES........................................... 29 PROTECTION AGAINST FALLING, FLYING, INTRUDING OBJECTS.................................. 30 UNAUTHORIZED MODIFICATION.............................................................. 30 PRECAUTIONS RELATED TO ATTACHMENTS AND OPTIONS......................................... 30 PRECAUTIONS RELATED TO CAB GLASS....................................................... 30 PRECAUTIONS WHEN RUNNING ENGINE INSIDE BUILDING........................................ 31 PRECAUTIONS FOR OPERATION.................................................................. 32 PRECAUTIONS FOR JOBSITE................................................................ 32 STARTING ENGINE........................................................................ 34 OPERATION.............................................................................. 36 TRANSPORTATION......................................................................... 44 TOWING................................................................................. 45 LIFTING OBJECTS WITH BUCKET............................................................ 46 PRECAUTIONS FOR MAINTENANCE................................................................ 47 PRECAUTIONS BEFORE STARTING INSPECTION AND MAINTENANCE................................. 47 PRECAUTIONS FOR INSPECTION AND MAINTENANCE............................................. 51 OPERATION ..................................................................................... 58 MACHINE VIEW ILLUSTRATIONS................................................................. 59 OVERALL MACHINE VIEW................................................................... 59 CONTROLS AND GAUGES.................................................................... 60 DETAILED CONTROLS AND GAUGES............................................................... 62 MONITORING SYSTEM...................................................................... 62 SWITCHES...............................................................................127 CONTROL LEVERS AND PEDALS..............................................................132 SUN ROOF...............................................................................135 WINDSHIELD.............................................................................135 EMERGENCY ESCAPE HAMMER................................................................141 DOOR LOCK..............................................................................141 CAP WITH LOCK..........................................................................142 DRINK BOX..............................................................................143 MAGAZINE BOX...........................................................................143 ASHTRAY................................................................................143 AIR CONDITIONER CONTROLS...............................................................144 RADIO..................................................................................157 AUXILIARY ELECTRIC POWER...............................................................162 FUSE...................................................................................163 SLOW BLOW FUSE.........................................................................164 CONTROLLER.............................................................................164 TOOL BOX...............................................................................164 GREASE PUMP HOLDER.....................................................................164 FIRE EXTINGUISHER......................................................................165 MACHINE OPERATIONS AND CONTROLS............................................................166 BEFORE STARTING ENGINE.................................................................166 STARTING ENGINE........................................................................185 AFTER STARTING ENGINE..................................................................190 STOPPING THE ENGINE....................................................................201 MACHINE OPERATION......................................................................202 STEERING THE MACHINE...................................................................206 SWINGING...............................................................................208 WORK EQUIPMENT CONTROLS AND OPERATIONS.................................................209 WORKING MODE...........................................................................211 PROHIBITED OPERATIONS..................................................................213 GENERAL OPERATION INFORMATION..........................................................216 TRAVELING ON SLOPES....................................................................218 ESCAPE FROM MUD........................................................................220 RECOMMENDED APPLICATIONS...............................................................221 BUCKET REPLACEMENT AND INVERSION.......................................................223 PARKING MACHINE........................................................................226 MACHINE INSPECTION AFTER DAILY WORK....................................................227 LOCKING................................................................................228 ROAD LINERS............................................................................229 TRANSPORTATION.............................................................................231 TRANSPORTATION PROCEDURE...............................................................231 LOADING AND UNLOADING WITH TRAILER.....................................................232 LIFTING MACHINE........................................................................241 COLD WEATHER OPERATION.....................................................................244 COLD WEATHER OPERATION INFORMATION.....................................................244 AFTER DAILY WORK COMPLETION............................................................246 AFTER COLD WEATHER SEASON..............................................................246 LONG TERM STORAGE..........................................................................247 BEFORE STORAGE.........................................................................247 DURING STORAGE.........................................................................247 AFTER STORAGE..........................................................................248 STARTING MACHINE AFTER LONG-TERM STORAGE...............................................248 TROUBLES AND ACTIONS.......................................................................249 RUNNING OUT OF FUEL....................................................................249 PHENOMENA THAT ARE NOT FAILURES........................................................249 TOWING THE MACHINE.....................................................................250 LIGHTWEIGHT TOWING HOLE................................................................251 SEVERE JOB CONDITION...................................................................251 DISCHARGED BATTERY.....................................................................252 OTHER TROUBLE..........................................................................256 MAINTENANCE ...................................................................................262 MAINTENANCE INFORMATION....................................................................263 OUTLINE OF SERVICE.........................................................................265 HANDLING OIL, FUEL, COOLANT, AND PERFORMING OIL CLINIC.................................265 ELECTRIC SYSTEM MAINTENANCE............................................................268 WEAR PARTS.................................................................................269 WEAR PARTS LIST........................................................................269 RECOMMENDED FUEL, COOLANT, AND LUBRICANT...................................................270 USE OF FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE...................271 RECOMMENDED BRANDS, RECOMMENDED QUALITY FOR PRODUCTS OTHER THAN KOMATSU GENUINE OIL....272 TIGHTENING TORQUE SPECIFICATIONS...........................................................273 TIGHTENING TORQUE LIST.................................................................273 SAFETY CRITICAL PARTS......................................................................274 SAFETY CRITICAL PARTS LIST.............................................................275 MAINTENANCE SCHEDULE.......................................................................276 MAINTENANCE SCHEDULE CHART.............................................................276 MAINTENANCE INTERVAL FOR HYDRAULIC BREAKER.............................................278 MAINTENANCE PROCEDURE......................................................................279 WHEN REQUIRED..........................................................................279 CHECK BEFORE STARTING..................................................................307 EVERY 100 HOURS MAINTENANCE............................................................308 EVERY 250 HOURS MAINTENANCE............................................................310 EVERY 500 HOURS MAINTENANCE............................................................315 EVERY 1000 HOURS MAINTENANCE...........................................................326 EVERY 2000 HOURS MAINTENANCE...........................................................332 EVERY 4000 HOURS MAINTENANCE...........................................................336 EVERY 5000 HOURS MAINTENANCE...........................................................338 EVERY 8000 HOURS MAINTENANCE...........................................................339 SPECIFICATIONS ................................................................................340 SPECIFICATIONS.............................................................................341 ATTACHMENTS, OPTIONS ..........................................................................344 ATTACHMENTS AND OPTIONS - GENERAL INFORMATION..............................................345 SAFETY FIRST...........................................................................345 ATTACHMENT INSTALLATION................................................................346 BUCKET WITH HOOK...........................................................................347 HOOK CONDITION.........................................................................347 PROHIBITED OPERATIONS..................................................................347 MACHINE READY FOR ATTACHMENT...............................................................348 LOCATIONS..............................................................................348 HYDRAULIC CIRCUIT......................................................................352 ATTACHMENT REMOVAL AND INSTALLATION....................................................353 ATTACHMENT OPERATIONS..................................................................357 LONG TERM STORAGE......................................................................361 SPECIFICATIONS.........................................................................361 ATTACHMENT GUIDE...........................................................................362 ATTACHMENT COMBINATIONS................................................................363 TRACK SHOES SELECTION..................................................................364 HANDLING OF RUBBER PAD SHOE AND ROAD LINER.............................................365 RECOMMENDED ATTACHMENT OPERATIONS..........................................................367 HYDRAULIC BREAKER......................................................................367 HANDLING MACHINES EQUIPPED WITH KOMTRAX....................................................372 BASIC PRECAUTIONS......................................................................372 INDEX..........................................................................................374
PLEASE NOTE:
⦁ This is the SAME exact manual used by your dealers to fix your vehicle.
⦁ The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
⦁ Any queries / doubts regarding your purchase, please feel free to contact [email protected]