FENDT NA Harvesting 8370 P 8870 PAL 8400 P 8400 PAL Combines Series Operator’s Manual – PDF DOWNLOAD
DESCRIPTION:
FENDT NA Harvesting 8370 P 8870 PAL 8400 P 8400 PAL Combines Series Operator’s Manual – PDF DOWNLOAD
1.1 Dear Customer
1.1.1 Appropriate Use
1.1 Dear Customer
1.1.1 Appropriate Use
- This self-propelled combine harvester is manufactured exclusively for usual agricultural purposes (appropriate use). Any other use is considered as being contrary to the appropriate use. AGCO declines all liability in cases of physical damage or injuries resulting from non-appropriate use. The risk lies exclusively with the user.
- The conformity and strict adherence to the operating, maintenance and repair requirements specified by AGCO are also essential factors for appropriate use.
- This self-propelled combine harvester may be used, serviced and repaired only by personnel having full knowledge of its specific features and who are aware of the danger involved and the applicable safety rules (prevention of accidents).
- It is the responsibility of the owner/user to ensure that prescribed safety precautions and other general technical, health and safety and road-safety rules are observed.
- AGCO disclaims all liability to any claim resulting from the fitting of non-approved parts or accessories or unauthorised modification or alteration. Customers are strongly recommended to contact an AGCO dealer in the event of after-sale problems and for any adjustments that may be necessary.
1.1.2 Changes and Improvements
In accordance with the Company’s policy of continuous improvements to its products, alterations in the specifications may be made at any time without notice. The Company accepts no responsibility for any discrepancies which may occur between the specifications of its machines and the descriptions thereof contained in its publications.
1.1.3 Directives
Machinery directive This machine has been designed and produced in conformity with the Machinery Directive 2006/42/EC. An EC declaration of conformity is supplied with the machine upon delivery.
1.1.4 Preface
This Manual
- The purpose of this manual is to enable the owner/operator to handle and maintain the combine efficiently. Time spent in becoming familiar with the Operator’s Manual now will save time in the field . Wide variations in operation conditions make it impossible for the Company to make comprehensive or definite statements in its publications concerning performance and the use of its machines, or to accept liability for any damage which may result from errors or omissions.
- The specifications and illustrations contained in this manual pertain to combines manufactured for specific countries. Due to differing laws and requirements in various countries, some apparent discrepancies may result between any particular combine and those depicted in this manual. Some accessories and optional equipment appearing in this manual are not
- necessarily available in all territories. Technical specifications, dimensions and weights are without any obligation. Right to change technical specifications and equipment reserved. Front, rear, RH and LH are always seen in the travelling direction.
TABLE OF CONTENTS:
FENDT NA Harvesting 8370 P 8870 PAL 8400 P 8400 PAL Combines Series Operator’s Manual – PDF DOWNLOAD
1 General Information 11
1 1 Dear Customer 13
1 1 1 Appropriate Use 13
1 1 2 Changes and Improvements 13
1 1 3 Directives 13
1 1 4 Preface 14
1 1 5 EC Declaration of Conformity for Combine and Table 15
1 1 6 Product Identification 18
1 1 7 Sketch and parts identification 19
1 1 8 Disposal 20
2 Safety 23
2 1 Safety 25
2 1 1 General Safety Precautions 25
2 1 2 Attention – Warning Symbols 25
2 1 3 Safety Precautions 25
2 1 4 Road Transport 27
2 1 5 Warning/Instruction decals 28
2 1 6 CE Marking and Type Plate on the Combine 31
2 1 7 Position of CE Markings and Type Plate 40
3 Operation, Controls and Cab 45
3 1 Before start 4 7
3 1 1 Before start 47
3 2 Operator cab 49
3 2 1 Arrangement and Controls 49
3 2 2 Optional Extra 50
3 3 Safety Precautions – on the Move 51
3 3 1 Safety Precautions – on the Move 51
3 4 Starting and Stopping the Engine 52
3 4 1 Starting the Engine 52
3 5 Drive Controls 54
3 5 1 Multifunction lever 54
3 5 2 Adjustable armrest and control panel 55
3 5 3 Gearshift 56
3 5 4 Reduced engine revolutions in road transport (Speed Matching System) 57
3 5 5 Steering column 57
3 5 6 Brakes 58
3 6 Seats 59
3 6 1 Adjustment of Operator Seat 59
3 6 2 Adjustment of Air-Suspended Seat 59
3 6 3 EF declaration of conformity for the operator seat 60
3 6 4 Safety switch in operator seat – (Operator Present Switch) 61
3 6 5 Safety belt 62
3 6 6 Passenger seat 62
3 7 Mirrors 63
3 7 1 Electrically adjustable rearview mirrors 63
3 8 Accessibility 64
3 8 1 Ladder for Cab 64
3 8 2 Ladder for Engine Compartment 64
3 8 3 Cleaning the Windscreens 66
FENDT 8370 P – 8400 P – EAME 3
D3151100M5 – SIN 580000026 – SIN 580400004 – SIN 581000014 – SIN 581400007
Table of contents
3 9 Emergency situations 67
3 9 1 Emergency Exit 67
3 9 2 Fire extinguisher 68
3 10 Light and Lamps 69
3 10 1 Lights 69
3 10 2 Main Light and Work Light 70
3 11 Climate control 71
3 11 1 Maintenance and overview 71
3 11 2 Operation of Climate Control 72
3 12 Printer 74
3 12 1 Exchanging Paper and Ribbon in Printer 74
3 12 2 Inserting the Paper Roll 74
3 12 3 Fitting the Ribbon 75
3 13 Optional Extra 76
3 13 1 Four-Wheel Drive 76
3 13 2 Reversing camera 77
3 13 3 Auto-Steering 78
4 Operation, FIELDSTAR 79
4 1 Safety precautions 81
4 1 1 Safety precautions, Operating FIELDSTAR 81
4 2 FIELDSTAR 82
4 2 1 FIELDSTAR, general description 82
4 2 2 Operating FIELDSTAR on Terminal 84
4 2 3 Operating the Terminal by Remote Control in the Multi-Function Lever 85
4 2 4 Contrast and Brightness Control 86
4 2 5 Cleaning of terminal 86
4 2 6 Data card 87
4 2 7 FIELDSTAR menu structure 87
4 3 Harvest menu 89
4 3 1 Instrument reading 89
4 4 Main Menu 93
4 4 1 Main Menu Structure 93
4 5 Monitoring 95
4 5 1 Monitoring in general 95
4 5 2 Shaft Speeds 96
4 5 3 Engine monitoring/alarm 96
4 5 4 Engine Safety Alarm 96
4 5 5 Information 97
4 5 6 Shaft speeds 98
4 6 Harvesting Data 99
4 6 1 Standard data 99
4 6 2 Data logging in general 100
4 6 3 Using Data Logging 101
4 6 4 Data logging setup 108
4 6 5 Using Markers 111
4 7 Operator’s Manual 112
4 7 1 Harvest Settings 112
4 7 2 Routine servicing 113
4 7 3 FIELDSTAR 113
4 8 Diagnostics 114
4 8 1 Troubleshooting in FIELDSTAR 114
4 9 Coding 120
4 9 1 Coding in general 120
4 9 2 Clock Adjustment 121
4 9 3 Language 121
4 9 4 Area Measuring 121
4 9 5 Table Calibration 123
4 9 6 Returns Volume 124
4 9 7 Grain loss monitor 124
4 9 8 Shaft alarm calibration 124
4 9 9 Concave Calibration 124
4 FENDT 8370 P – 8400 P – EAME
D3151100M5 – SIN 580000026 – SIN 580400004 – SIN 581000014 – SIN 581400007
Table of contents
4 9 10 Constant Flow 124
4 9 11 Wheel Track and Auto Level Combine 124
4 9 12 Coding of electrical straw deflectors 125
4 9 13 Lead Time and Lag Time 127
4 9 14 Calibration of actuator for electrical sieves 128
4 10 Settings 129
4 10 1 Harvest Settings 129
4 10 2 Table settings 132
4 10 3 Machine settings 134
4 11 Returns Volume Monitor 137
4 11 1 Returns volume 137
4 11 2 Coding 137
4 12 Grain Loss Monitoring 139
4 12 1 Sensors 139
4 12 2 Adjustment of Grain Loss Sensors 139
4 13 Shaft Alarm Limits 141
4 13 1 Shaft alarm calibration 141
4 14 Yield meter 142
4 14 1 Yield meter (isotopic) 142
4 14 2 Micro-Trak Yield Meter 144
4 14 3 Yield Meter Calibration 146
4 15 Moisture meter 148
4 15 1 Limitations in the use of the moisture meter 148
4 15 2 Continuous Moisture Measuring 148
4 15 3 Measuring Principle 148
4 15 4 Using the Moisture Meter 149
4 15 5 Cleaning the Moisture Meter, 149
4 15 6 Calibration of moisture meter 150
4 16 Cutting height control 152
4 16 1 Adjustment and Operation of Cutting Height Control 152
4 16 2 Coding the Table 155
4 17 Field pressure control 156
4 17 1 Adjustment and operation of field pressure control 156
4 18 Interaction between the Table Controls 158
4 18 1 Table Controls, an outline 158
4 19 Auto Level table 160
4 19 1 Principle of Auto Level Table 160
4 19 2 Bleeding 161
4 19 3 Coding of Auto Level Table 162
4 19 4 Calibration of Table Angle 162
4 20 Operation of Auto Level Table 164
4 20 1 Using the Auto Level table 164
4 21 Ground sensors 166
4 21 1 Checking and Adjusting the Ground Sensors 166
4 22 Constant Flow 168
4 22 1 Constant Flow functional description 168
4 22 2 Start-up and Adjustment of Constant Flow 169
4 22 3 Constant Flow Engagement 171
5 Operation, Auto Level Combine 173
5 1 Safety precautions 175
5 1 1 Safety precautions, operation of Auto Level Combine 175
5 1 2 Safety System 175
5 2 Attachment of Auto Level Table 176
5 2 1 Attachment of table to Auto Level combine 176
5 3 Combinations 177
5 3 1 Automatic or Manual 177
5 3 2 Selecting Combination 177
5 3 3 Adjustment Combinations for Auto Level Combine and Auto Level Table 177
5 3 4 Priority of hydraulic functions 179
5 4 Auto Level 180
5 4 1 Auto Level Combine 180
FENDT 8370 P – 8400 P – EAME 5
D3151100M5 – SIN 580000026 – SIN 580400004 – SIN 581000014 – SIN 581400007
Table of contents
5 4 2 Manual Control of Auto Level Combine 180
5 5 Auto Level Combine/Table 181
5 5 1 Combine 181
5 5 2 Transport 182
5 5 3 Auto Level Table 183
5 6 Calibration 184
5 6 1 Calibration of Auto Level Combine 184
5 6 2 Errors during Calibration 185
5 7 Coding 186
5 7 1 Coding of Auto Level Table 186
5 7 2 Zero Cutting Height 186
5 8 Safety system 187
5 8 1 Safety system, Auto Level 187
5 8 2 Automatic Control of the Tilt Sensor Function 187
5 8 3 About the System 188
5 8 4 Hose Breach Protection for Auto Level Hydraulics 188
5 9 Troubleshooting 189
5 9 1 Troubleshooting in General 189
5 9 2 Machine Not Levelling Correctly 190
5 10 Servicing and User Tips 192
5 10 1 Retrofit of new FIELDSTAR Auto Level Job Computer and Sensors 192
5 10 2 Unintentional Use of Manual Keys in Automatic Mode 192
5 10 3 Diagnostics – Auto Level Combine Functions and Sensors 193
6 Engine 195
6 1 Safety precautions 197
6 1 1 Safety Precautions, Engine 197
6 2 Engines 198
6 2 1 Engine types 198
6 3 Air-Intake 199
6 3 1 Filter System 199
6 4 Cooling System 200
6 4 1 Rotary Screen and Dust Aspirator 200
6 4 2 Coolers 200
6 4 3 Coolant 201
6 4 4 Checking the fan belt tension 201
6 4 5 Checking the water pump belt 202
6 5 Fuel system 203
6 5 1 Fuel and quality requirements 203
6 5 2 Fuel system 204
6 5 3 Filter change 205
6 5 4 Bleeding the fuel system 206
6 6 SCR 207
6 6 1 The SCR system in general 207
6 6 2 Components and functions 208
6 6 3 Filling and storing AdBlue 209
6 6 4 Filter change 210
6 6 5 SCR system failure 211
6 7 Crankcase ventilation 212
6 7 1 Closed crankcase ventilation 212
6 8 Engine oil/change 213
6 8 1 Oil and Filter Change 213
6 9 Cleaning 214
6 9 1 Cleaning of engine compartment 214
6 10 EEM4 engine control 21 5
6 10 1 Electronic Engine Management and Monitoring 215
6 10 2 Engine Trouble Shooting (Self-Diagnosis) 216
6 10 3 EEM4 Codes 218
7 Cutting Tables 231
7 1 Safety precautions 233
7 1 1 Safety Precautions, Cutting Tables 233
Table of contents
Attachment/Removal of Table
7 2 1 Attachment of Table, Standard and Auto Level
7 2 2 Removal of Table
7 2 3 Supports
Table trailer
7 3 1 Attachment of combine and trailer
7 3 2 Table Trailer Brakes
Reel Adjustment Up/Down, Fore/Aft
Bleeding
Reel Rotation
Reel tine bars
Adjustment of the Reel in the Table
Knife
7 5 1 Knife and knife drive
Feeding
7 6 1 Table auger
7 6 2 Cut-off strip and distribution strip
7 6 3 Replacement of Feathering Fingers
7 6 4 Auger Flight Extensions, 20-22-25-30′ Tables
7 6 5 Reversing
Transmission
7 7 1 PowerFlow table, knife drive and table auger
7 7 2 Slip Clutch for Table Auger
PowerFlow Table
7 8 1 PowerFlow belts
7 8 2 Inspection and Start-Up of Powerflow Belts
7 8 3 Adjustment of belts
7 8 4 Scrapers, front
7 8 5 Scrapers, Rear, and Adjustment of Bearing Housings
7 8 6 Table Bottom
7 8 7 Cleaning
Crop lifters
7 9 1 Using Crop Lifters
Vertical Knives, Rape Auger and Straw Dividers
7 10 1 Vertical knife
7 10 2 Mounting of Vertical Knife
7 10 3 Rape auger
7 10 4 Folding torpedo dividers and bow dividers
7 10 5 Mounting of Straw Dividers
7 10 6 Adjustment of Torpedo Divider
Fixed Table Auger Fingers
7 11 1 Fitting of fixed table auger fingers
7 11 2 Using Fixed Table Auger Fingers
7 11 3 High Table Sides
Main crop elevator
7 12 1 Elevator Chain
7 12 2 Transmission for Table
7 12 3 Stone Trap
7 12 4 Initial Adjustment of Cutting Height Indication
8 Operation of Table and Threshing Unit 261
8 1 Safety precautions 263
8 1 1 Safety Precautions, Operation of Machine and Cutting Table 263
8 2 Operation of Table 265
8 2 1 Table Height and Table Automatic Control 265
8 2 2 Cutting Height Control 266
8 2 3 Field Pressure Control 267
8 2 4 Preset cutting height 268
8 2 5 Auto Level table 268
8 3 Threshing Unit Transmission 270
8 3 1 Threshing unit engagement 270
8 3 2 Cylinder Variator 271
8 3 3 Turning Tool for Cylinder 271
8 4 Concave Setting, Electrically Adjustable 272
8 4 1 Operation of Concave 272
8 4 2 Concave Setting 272
8 5 Threshing 274
8 5 1 Concave filler plates 274
8 5 2 Straw walkers 274
8 5 3 Rear beater curtain 275
8 6 Straw Chopper and Spreader Hood 276
8 6 1 Straw chopper 276
8 6 2 Adjustment of spreader hood 278
8 6 3 Counter Knives and Cross Bar 279
8 6 4 Replacement of Knives 281
8 7 Fanning Mill and Sieves 282
8 7 1 Fanning mill 282
8 7 2 Shaker shoe 282
8 7 3 Shaker Shoe with Electrical Sieves 283
8 7 4 Manual Adjustment of Sieves 283
8 7 5 Cleaning of Sieves and Main Grain Pan 284
8 7 6 Cleaning the Sieves 285
8 7 7 Shaker Shoe Light 287
8 7 8 Special sieves 287
8 8 Internal Grain Transport 288
8 8 1 Auger Housing/Elevators 288
8 8 2 Returns thresher 288
8 8 3 Tank filling auger 289
8 8 4 Grain tank 290
8 8 5 Unloading auger 292
8 8 6 Unloading Auger Clutch 293
8 8 7 Unloading tube 294
8 9 Rotary Separator 295
8 9 1 Adjusting the revolutions 295
8 9 2 Concave setting 296
8 10 Straw hood 297
8 10 1 Alarm switch for straw hood blocked 297
8 10 2 Light in straw hood 298
8 11 Chaff spreader 299
8 11 1 Setting 299
8 12 Maxi Spreader 301
8 12 1 Operation and Adjustment 301
8 12 2 Adjustment of Sensors 302
8 13 Maize Threshing 303
8 13 1 Maize threshing in general 303
8 13 2 Attachment of Maize Header 303
8 13 3 Area measuring 304
8 13 4 Main crop elevator 304
8 13 5 Concave/initial settings 305
8 13 6 Threshing cylinder 305
8 13 7 Rotary Separator 305
8 13 8 Shaker shoe 306
8 13 9 Straw walkers 306
8 13 10 Bottom auger cover plate 307
8 13 11 Scrapers 307
8 13 12 Rear beater curtain 307
8 13 13 Straw chopper 308
8 13 14 Maxi Spreader 308
8 14 Harvest settings 309
8 14 1 Harvest charts and settings 309
8 FENDT 8370 P – 8400 P – EAME
8 15 Threshing 311
8 15 1 Threshing directions 311
Transmissions
9 1 Safety precautions
9 1 1 Safety Precautions, Transmissions
9 2 Adjustment of Transmissions
9 2 1 General
9 2 2 Threshing unit clutch
9 2 3 Hydrostatic transmission
9 3 Transmissions
Rear beater
Table and crop elevator
Straw chopper
Threshing cylinder
Unloading auger
Shaker Shoe and Chaff Spreader Counter Drive, and Straw Walker Drive
Filling and Returns System Countershaft
Returns Elevator and Returns Thresher
Tank Filling Elevator and Tank Filling Auger
Dust aspirator
Rotary screen
Fanning mill
Rotary Separator
Alternator and fan
Climate control
9 4 Transmission Diagrams
9 4 1 Transmission diagram, left-hand side
9 4 2 Transmission Diagram, Right-Hand Side
10 Hydraulics 331
10 1 Safety precautions 333
10 1 1 Safety Precautions, Hydraulic System 333
10 2 Hydraulic System 334
10 2 1 Hydraulic system, standard combine 334
10 2 2 Hydraulic System, Four-Wheel Drive 335
10 3 Oil change 336
10 3 1 Draining and refilling hydraulic oil 336
10 4 Filter Change 337
10 4 1 Filter change in general 337
10 4 2 Return Oil Filter 337
10 4 3 Storage of Hydraulic System 338
10 5 Auxiliary Hydraulics 339
10 5 1 Auxiliary hydraulics in general 339
10 5 2 Functions and Auxiliary Hydraulics 339
10 5 3 Reel adjustment fore/aft – up/down 339
10 6 Hydraulic diagrams 340
10 6 1 Hydraulics Diagram, Standard Combine 340
10 6 2 Hydraulics Diagram, Auto Level Combine 342
10 6 3 Hydraulics Diagram for Chaff Spreader 344
10 6 4 Hydraulics diagram for Maxi Spreader 345
11 Maintenance 347
11 1 Safety precautions 349
11 1 1 Safety Precautions, Maintenance 349
11 2 Undercarriage 351
11 2 1 Undercarriage in general 351
11 2 2 Wheel nut torques 351
11 2 3 Tyre pressure 351
11 3 Lubrication Intervals 353
11 3 1 Lubrication chart, time intervals 353
11 3 2 Lubrication chart, right- and left-hand side 356
FENDT 8370 P – 8400 P – EAME 9
D3151100M5 – SIN 580000026 – SIN 580400004 – SIN 581000014 – SIN 581400007
Table of contents
11 3 3 Lubrication chart, main crop elevator and front axle 358
11 3 4 Lubrication points, left-hand machine side 359
11 3 5 Lubrication points, right-hand machine side 373
11 3 6 Lubricants and operating fluids 384
11 3 7 Preliminary service inspections 385
11 3 8 Maintenance required 386
11 4 Gear Oil Change 389
11 4 1 Gearbox 389
11 4 2 Final drives 389
11 4 3 Right-angle gear for returns thresher 390
11 5 Climate control 391
11 5 1 Diagram for Climate Control System 391
11 5 2 Maintenance 391
11 6 Cleaning and Off-Season Storage 392
11 6 1 Cleaning 392
11 6 2 Off-season storage 393
11 6 3 Storage of Engine, Fuel System, SCR System and Hydraulic System 394
11 6 4 Periodical Start-Up 394
11 6 5 Removal of Crop Elevator 395
11 6 6 Removal of Elevator Chains 395
11 6 7 After Off-Season Storage 395
11 7 Adjustment of Brakes 396
11 7 1 Adjustment of Foot Brakes, Disc Brakes 396
11 7 2 Adjustment of parking brake 396
12 Electrical System 397
12 1 Safety precautions 399
12 1 1 Safety Precautions, Electric System 399
12 2 Electrical System 400
12 2 1 Charging system 400
12 2 2 Electric Boxes and Main Switch 401
12 2 3 External connectors 12V 402
12 3 Electro-Hydraulic System 404
12 3 1 Electro-Hydraulic System in General 404
12 4 Key to Signatures for Wiring Harness 405
12 4 1 Wire Codes 405
12 4 2 Component Codes 405
12 5 Overview, Electric Box and Cab 406
12 5 1 Position of Connectors in Electric Boxes 406
12 5 2 Fuses and Relays, Electric Box and Cab 407
12 6 Wiring diagrams 409
12 6 1 Key to symbols 409
12 6 2 Diagrams overview 410
12 6 3 Fuse ratings 410
12 6 4 Components 411
12 6 5 Wiring diagrams 420
13 Specifications 433
13 1 Specifications 435
13 1 1 Dimensions and specifications 435
10 FENDT 8370 P – 8400 P – EAME
D3151100M5 – SIN 580000026 – SIN 580400004 – SIN 581000014 – SIN 581400007
Table of contents a 1 General Information
1 1 Dear Customer 13
1 1 1 Appropriate Use 13
1 1 2 Changes and Improvements 13
1 1 3 Directives 13
1 1 4 Preface 14
1 1 5 EC Declaration of Conformity for Combine and Table 15
1 1 6 Product Identification 18
1 1 7 Sketch and parts identification 19
1 1 8 Disposal 20
FENDT
IMAGES PREVIEW OF THE MANUAL:
VIDEO PREVIEW OF THE MANUAL:
PLEASE NOTE:
- This is the same manual used by the DEALERSHIPS to SERVICE your vehicle.
- The manual can be all yours – Once payment is complete, you will be taken to the download page from where you can download the manual. All in 2-5 minutes time!!
- Need any other service / repair / parts manual, please feel free to contact us at heydownloadss @gmail.com . We may surprise you with a nice offer
S.M