Fendt NA Harvesting 5275 C – 5335 C combines operator’s Manual – PDF DOWNLOAD
DESCRIPTION:
Fendt NA Harvesting 5275 C – 5335 C combines operator’s Manual – PDF DOWNLOAD
1.1 Information
1.1.1 Introduction
- Your new self-propelled combine is manufactured for harvesting seed and cereal crops, for threshing, separating, cleaning and conveying the grain into the tank and depositing the straw on the ground. This Operator’s Manual should be used as a practical reference guide: It contains all the necessary practical information for the operation, adjustment and maintenance
- of your new machine. Your combine was designed and built to ensure optimum performance, comfort and ease-of-operation in a wide variety of crops and conditions. The combine has been thoroughly inspected prior to delivery both at the factory and by your Dealer, to ensure you receive it in perfect condition. To keep the combine in perfect condition and to ensure
- trouble-free performance, the periodical maintenance operations listed in this manual should be carried out at the recommended intervals. Before operating and/or driving the combine, read this Operator’s Manual carefully, paying particular attention to the section on safety rules. Always keep this manual on hand for further reference.
- The terms “left” and “right” are always used with reference to the machine traveling direction. Should you require further information about the machine, please do not hesitate to contact your authorized Dealer. Your Dealer provides specially trained personnel, genuine spare parts and the required tools to solve any problems that may arise
NOTE:
- This combine has been designed and built in compliance with the Machine Directive 2006/42/EC. A CE Declaration of Conformity is supplied with the machine (see specific chapter).
- This manual is published for worldwide distribution, and the availability of equipment shown as standard or optional varies according to the territory in which the combine is to be used. Specifications may differ from those contained in this Operator’s Manual according to the customer’s requirements
- In order to provide a better view of features or adjustments, certain illustrations in this manual may show an assembly with standard guards, or the guards required by law in different countries, open or removed.
TABLE OF CONTENTS:
Fendt NA Harvesting 5275 C – 5335 C combines operator’s Manual – PDF DOWNLOAD
General Information 1
Safety 2
Operation 3
Controls and Instruments 4
Field Operations 5
Lubrication and Maintenance 6
Adjustments 7
Systems 8
Troubleshooting 9
Off-Season Storage 10
Optional equipment 11
Technical Specifications 12
1 1 Information 17
1 1 1 Introduction 17
1 1 2 Company policy 17
1 1 3 Optional equipment 17
1 1 4 Spare parts and accessories 18
1 1 5 Warranty 18
1 1 6 Lubricants 18
1 2 Use of the combine 20
1 3 Identification 22
1 3 1 Combine identification 22
1 3 2 Engine Identification 23
1 3 3 Cutting table identification 24
1 3 4 Operator seat identification 24
1 3 5 Hydrostatic pump identification 25
1 3 6 Hydrostatic motor identification 25
1 3 7 Straw chopper identification (if fitted) 26
1 3 8 Chaff spreader identification (if fitted) 26
1 3 9 Trailer hitch identification (if fitted) 27
1 4 Identification form 28
1 4 1 Machine data 28
1 5 Conformity 29
1 5 1 EC Declaration of Conformity 29
1 6 Information 31
1 6 1 Ecology 31
1 6 2 Hydraulic systems: hoses 31
1 6 3 Scrapping and disposal 32
1 7 Weight 33
1 7 1 Weight distribution 33
A
Access
Engine compartment 209
Grain tank 211
to the inside of the grain tank 212
to the operator platform 204
Adjustments
Belts and chains 353
Air conditioning 188
B
Basic settings
summary table 286
Battery
Replacement 395
Belts and chains (adjustment) 353
Bottom sieve 273
Brake
brake 110
Brakes
C
Cab
brake 388
brakes 110, 387
cab window 201
Cleaning the rear-view mirrors 208
Cleaning the windshield 207
Emergency exit 69
fire resistance 89
footrest 202
heating 190
Lighting 192
main components 187
Operator seat 196
Passenger seat 196
Preparation for radio installation 203
pressurization 190
reading light 202
Rear-view mirrors 196
Sun visor 201
Calibrations 166
Camera
cleaning 209
Chaff Spreader
belt tensioning 531
disengaging the chaff spreader 531
speed 531
working and maintenance positions 529
Clearance between unloading auger and table 553
Combine dimensions 544
Combine identification
Machine data card 28
Computer
main function controls 127
Concave
Combines
FENDT 5275C-6335C_EN_327317019
basic settings 250
concave filler plates (wheat concave) 244
Spike-toothed type (for rice) 251
Universal wheat/maize type 249
Connections for diagnostics 462
Constant Speed 164
Control units 446
Counters
available parameters 177
Crop processing 95
Cutting table
Attaching and removing 227
automatic controls 143
Automatic height settings 146
Ground pressure setting 148
lateral floatation 231
Lateral floatation setting 149
Pre-set height settings 144
reel 142
removing 227
Set-up 138
Cylinder Housing
concave 243
rear beater 252
Sectional concave 246
threshing drum 241
unblocking the cylinder 242
D
Decals 53
Diagnostics 173
Display
Adjustments 178
Document Pocket 200
E
EC Declaration of Conformity 29
Ecology 31
Electric connectors 459
Electrical system
Alternator 431
battery 431
control units 446
electric connectors 459
Electric motors 450
fuses 433
relays 440
sensors 454
Engine
catalytic fluid (DEF) 403
Cooling system 409
diesel fuel prefilter 503
engine air intake and exhaust system 406
engine fuel system 402
engine lubrication system 411
oil vapor recovery system 412
571
Index
Permitted fuels 400
starting 213
Stopping 215
Error codes
severity level 172
F
Fanning Mill
Adjusting the fanning mill for light seed crops 268
Finger feed roller 236
Fire extinguisher
additional fire extinguisher 502
Fuses 433
G
Gearshift lever 115
General Information
Company policy 17
Introduction 17
Lubricants 18
Optional equipment 17
Spare parts and accessories 18
Warranty 18
Grain tank 277
Grain tank unloading auger 379
H
Header
compensation 150
Hydraulic systems 31
Hydraulics system
Leveling 425
Pumps and fuel tank 416
reel rotation control hydraulic circuit 421
Reversing 424
steering 422
Table and grain unloading auger positioning circuits
417
Hydrostatic Transmission
Front-wheel drive 429
Rear-wheel drive 430
Instrument panel
components 116
L
Levelling combine settings 163
Lubrication 349
Lubrication and Maintenance 291
M
Main Crop Elevator
access to the main components 235
Adjustments 233
finger feed roller 236
Shuttle 237
Main Grain Pan 261
572
rrar: an1■ –
Maintenance
maintenance work 45
Periodical 344
preliminary service inspection 293
rubber tracks (ATRAK) 292, 353
scheduled 294
when and where to carry it out 295
Maintenance and calibration 165
Meters
available parameters 177
Multi-Crop Separator (MCS)
checking the concave position 255
disengaging the concaves 256
speed 257
Multifunction lever 112
0
Optional equipment
additional fire extinguisher 502
additional lights 501
Additional lights for flip-up maize headers 502
Air compressor for maintenance 504
Ballast weights 515
diesel fuel prefilter 503
electrically operated deflectors 520
Equipment for corn-cob 512
Equipment for light seed crops 513
Equipment for maize 511
Equipment for rice 513
Equipment for soya and peas 514
Four-wheel drive 500
multimedia navigation system 505
rubber tracks (ATRAK) 532
Top sieve 508
Tracks 533
Windbreak 500
p
Performance and returns monitor 137
R
Rear axle
support 394
toe-in setting 390
Rear beater 252
Rear-wheel drive (4WD) 101
Refrigerator 199
Regulations (statutory) 89
Relays 440
Road transport
Operations to be carried out before road transport
216
Rotary separator (Multi-Crop Separator – MCS) 254
Rubber tracks (ATRAK) 292, 353, 532
s
Safety
Audible alarm for reversing 75
Automatic trailer hitch 81
Crop elevator safety guard 73
Combines
FENDT 5275C-6335C_EN_327317019
rrar: an1■ –
decals 53
Electromagnetic emissions 90
Emergency exit 69
Engine 49
Field Operations 41
Fire extinguisher 80
Fire resistance inside the cab 89
Hand rails 77
Hydraulic systems 31
Information for road transport 38
maintenance work 45
Noise level in the cab 89
Notes for road transport 91
Operator presence device 70
Operator presence device anomaly 71
Reflectors for road transport 76
Safety belts 72
Safety device for operations to be carried out in the
upper part of the machine 79
safety devices
Fixed trailer hitch 86
Table descent limiters 72
safety guards 77
Statutory regulations 89
Straw Chopper (if fitted) 80
Towing the combine 88
Vibrations in the cab 89
warning symbols and safety instructions 37
Wheel sprags 74
Scrapping and disposal 32
Sectional concave
concave filler plates 247
parallelism between the threshing drum and
concave 248
Shuttle 237
Sign plates
Chaff spreader (if fitted) 26
Combine 22
cutting table 24
Engine 23
hydrostatic motor 25
hydrostatic pump 25
Operator seat 24
Straw chopper (if fitted) 26
Trailer hitch (if fitted) 27
Slip Clutch 377
Starting and stopping the combine 225
Steering
ball joints 390
Steering column 107
Stone trap
removal and refitting 239
Straw chopper
access to the rotor 524
counter-knives 526
Deflector settings 136
disengaging 524
electrically operated deflectors 520
in maize 527
operating 523
rotor knives 525
transport positions 520
working position 521
Straw walkers
Adjustments 259
IMAGES PREVIEW OF THE MANUAL:
VIDEO PREVIEW OF THE MANUAL:
PLEASE NOTE:
- This is the SAME exact manual used by your dealers to fix your vehicle.
- The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
- Any queries / doubts regarding your purchase, please feel free to contact [email protected]
S.M