Fendt NA Harvesting 5180 E OPERATOR ’S MANUAL – PDF DOWNLOAD
DESCRIPTION:
Fendt NA Harvesting 5180 E OPERATOR ’S MANUAL – PDF DOWNLOAD
1. GENERAL INFORMATION
1.1 CUSTOMER INFORMATION
INTRODUCTION
- Your new self-propelled combine is manufactured for harvesting seed and cereal crops, for threshing, separating, cleaning and conveying the grain into the tank and depositing the straw on the ground.
- This Operator’s Manual contains all the necessary practical information which describes the operation, adjustment and maintenance of your new machine and should be used as a practical reference guide. The combine is designed and built to ensure optimum performance, comfort and ease of operation in a wide variety of crops and conditions.
- The combine has been thoroughly inspected prior to delivery both at the factory and by your Dealer, to ensure you receive it in perfect condition. To keep the combine in perfect condition and to ensure trouble-free performance, the periodical maintenance operations listed in this manual should be carried out at the recommended intervals. Before operating or
- driving the combine, read this Operator’s Manual carefully, paying particular attention to the section on safety rules. Always keep this manual on hand for further reference. The terms “left” and “right” are always used with reference to the travelling direction. Should you require further information about the machine, please do not hesitate to contact your authorised
- Dealer. Your Dealer provides specially trained personnel, genuine spare parts and the required tools to solve any problems that may arise.
NOTE:
- This combine has been designed and built in compliance with the Machine Directive 98/37/EC. A CE Declaration of Conformity is supplied with the machine. The manufacturer disclaims all liability to any claim resulting from unauthorised modification or alteration.
- This manual is published for world wide distribution, and the availability of equipment shown as basic or accessory varies according to the territory in which the combine is to be used. Specifications may differ from those contained in this Operator’s Manual according to the customer’s requirements.
- In order to provide a better view, certain illustrations in this manual may show an assembly with standard guards, or the guards required by law in different countries, open or removed. However, a machine should never be operated in this condition. For your own safety, always ensure all safety guards are fitted and closed correctly before operating the machine.
- This Operator’s Manual, along with the Operator’s Manual for the table, must always be kept in the pocket provided on the right-hand side of the operator seat for convenient reference. Modifications and improvements In accordance with the Company’s policy of continuous improvements to its products, the Company reserves the right to modify and improve its products whenever necessary and to the required extent, without any obligation to apply such modifications to previously sold products.
TABLE OF CONTENTS:
Fendt NA Harvesting 5180 E OPERATOR ’S MANUAL – PDF DOWNLOAD
1 General Information
2 Operation – Controls and Instruments
3 Field Operations
4 Lubrication and Maintenance
5 Adjustments
6 Troubleshooting
7 Off-season storage
8 Optional Equipment
9 Technical Specifications
10 Alphabetical Index
1 GENERAL INFORMATION
Customer information 1-1
Combine identification 1-3
Ecology: information for the prevention of environmental pollution 1-8
Safety 1-9
Emergency exit 1-30
Safety devices 1-31
Appropriate use 1-37
Noise level in the cab 1-38
Fire resistance inside the cab 1-38
Statutory regulations 1-38
Vibrations in the cab 1-39
Hydraulic systems: hoses 1-39
Safety requirements for hydraulic systems and components (European standard EN 982) 1-39
Scrapping and disposal 1-40
Electromagnetic emissions 1-40
Notes for road transport 1-41
Weight distribution 1-43
2 OPERATION – CONTROLS AND INSTRUMENTS
Operation – Crop Processing 2-1
Steering column and control pedals 2-6
Multifunction lever 2-7
Front control panel 2-8
Rear control panel 2-9
Controls at the operator seat 2-18
Access to combine components 2-25
Starting the engine 2-28
Stopping the engine 2-29
Driving the combine 2-30
Operations to be carried out before road transport 2-31
Before Using the Combine 2-33
Towing the combine 2-34
3 FIELD OPERATIONS
General Information 3-1
Starting and Stopping the Combine 3-2
Cutting table 3-3
Main Crop Elevator 3-6
Cylinder housing 3-10
Concave 3-11
Rear beater 3-16
Straw walkers 3-17
Main Grain Pan 3-18
Fanning mill 3-19
Top sieve 3-21
Bottom sieve 3-22
Returns 3-23
Grain tank 3-24
4 LUBRICATION AND MAINTENANCE
General information 4-1
Preliminary Service Inspection 4-2
Scheduled Service Inspection 4-3
Where and When to Carry Out Service Inspection 4-4
Routine Service Inspection 4-6
Maintenance work 4-8
Capacities and Specifications – FENDT 5180 E 4-28
Section-Page
Service Schedule 4-29
5 ADJUSTMENTS
Belt and chain adjustment 5-1
Belts and chains (left-hand side) 5-2
Belts and chains (right-hand side) 5-9
Slip clutches 5-15
Tyres 5-16
Brakes 5-20
Rear axle 5-21
Engine 5-23
Hydraulic system 5-26
Electrical system 5-29
6 TROUBLESHOOTING
Feeding 6-1
Threshing unit 6-1
Separation and cleaning 6-2
Hydrostatic Transmission 6-5
Engine 6-6
Auxiliary hydraulics 6-7
Auxiliary Electrical System 6-7
Straw Chopper 6-8
7 OFF-SEASON STORAGE
8 OPTIONAL EQUIPMENT
9 TECHNICAL SPECIFICATIONS
Wheels and tyres 9-1
Tracks with runners 9-3
Combine Dimensions with Tyres (mm) 9-4
Combine Dimensions with Half-Tracks (mm) 9-5
Clearance between unloading auger and table 9-6
Available tables and weights 9-6
Clearance between unloading auger and ground 9-7
Technical specifications – 5180 E model 9-8
10 ALPHABETICAL INDEX
IMAGES PREVIEW OF THE MANUAL:
VIDEO PREVIEW OF THE MANUAL:
PLEASE NOTE:
- This is the SAME exact manual used by your dealers to fix your vehicle.
- The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
- Any queries / doubts regarding your purchase, please feel free to contact [email protected]
S.M