FENDT NA Harvesting 18-30 PowerFlow OPERATOR ’S MANUAL – PDF DOWNLOAD
DESCRIPTION:
FENDT NA Harvesting 18-30 PowerFlow OPERATOR ’S MANUAL – PDF DOWNLOAD
1.1 Dear Customer
1.1.1 Appropriate use
- This cutting table is manufactured exclusively for usual agricultural purposes (appropriate use). Any other use is considered as being contrary to the appropriate use. AGCO declines all liability in cases of physical damage or injuries resulting from non-appropriate use. The risk lies exclusively with the user. The conformity and strict adherence to the operating,
- maintenance and repair requirements specified by AGCO are also essential factors for appropriate use. This table may be used, serviced and repaired only by personnel having full knowledge of its specific features and who are aware of the danger involved and the applicable safety rules (prevention of accidents). It is the responsibility of the owner/user to ensure that
- prescribed safety precautions and other general technical, health and safety and road-safety rules are observed. AGCO disclaims all liability to any claim resulting from the fitting of non-approved parts or accessories or unauthorised modification or alteration. Customers are strongly recommended to contact an AGCO dealer in the event of after-sale problems and for any adjustments that may be necessary.
1.1.2 Changes and improvements
In accordance with the Company’s policy of continuous improvements to its products, alterations in the specifications may be made at any time without notice. The Company accepts no responsibility for any discrepancies which may occur between the specifications of its tables and the descriptions thereof contained in its publications.
1.1.3 Preface
This manual
- The purpose of this manual is to enable the owner/operator to handle and maintain the table efficiently. Time spent in becoming familiar with the Operator’s Manual now will save time in the field. Wide variations in operating conditions make it impossible for the Company to make comprehensive or definite statements in its publications concerning performance and the use of its tables, or to accept liability for any damage which may result from errors or omissions.
- The specifications and illustrations contained in this book pertain to tables manufactured for specific countries. Due to differing laws and requirements in various countries, some apparent discrepancies may result between any particular table and those depicted in this book. Some accessories and optional equipment appearing in this book are not necessarily
- available in all territories. Please see the operator’s manual for the combine for further details on the interdependence between combine and table. Technical specifications, dimensions and weights are without any obligation. Right to change technical specifications and equipment reserved. Front, rear, RH and LH are always seen in the travelling direction.
TABLE OF CONTENTS:
FENDT NA Harvesting 18-30 PowerFlow OPERATOR ’S MANUAL – PDF DOWNLOAD
1 General Information 5
1 1 Dear Customer 7
1 1 1 Appropriate use 7
1 1 2 Changes and improvements 7
1 1 3 Preface 7
1 1 4 EC declaration of conformity for table 8
1 1 5 Product identification 11
1 1 6 Sectional drawing and parts identification 11
1 2 Safety 13
1 2 1 General safety precautions 13
1 2 2 Attention – Warning Symbols 13
1 2 3 Safety precautions 13
1 2 4 Additional safety precautions 14
1 2 5 Before Start 15
1 2 6 Road transport 16
1 2 7 CE markings and type plate on the table 16
1 2 8 Warning/Instruction decals 21
1 2 9 Position of CE markings and type plate 22
2 Operation and Adjustment 25
2 1 Safety precautions 27
2 1 1 Safety Precautions, Cutting Tables 27
2 2 Attachment/Removal of Table 28
2 2 1 General 28
2 2 2 Attachment of Table, Standard and Auto Level 28
2 2 3 Removal of Table 30
2 2 4 Supports 31
2 3 Table trailer 32
2 3 1 General 32
2 3 2 Attachment of Combine and Trailer 32
2 3 3 Table Trailer Brakes 33
2 4 Auto Level Table 34
2 4 1 Principle of Auto Level Table 34
2 5 Potentiometer for automatic cutting height control 35
2 5 1 Adjustment of potentiometer for automatic cutting height control 35
2 6 Reel 37
2 6 1 Safety stop for reel 37
2 6 2 Reel Adjustment Up/Down, Fore/Aft 38
2 6 3 Bleeding 39
2 6 4 Reel Rotation 39
2 6 5 Reel tine bars 40
2 6 6 Adjustment of the Reel in the Table 40
2 7 Knife 41
2 7 1 Knife and knife drive 41
2 8 Feeding 42
2 8 1 Table auger 42
2 8 2 Cut-off strip and distribution strip 43
2 8 3 Replacement of Feathering Fingers 44
2 8 4 Auger Flight Extensions, 20-22-25-30′ Tables 44
2 8 5 Reversing 44
2 9 Transmission 45
2 9 1 General 45
2 9 2 PowerFlow Table, Knife Drive and Table Auger 45
2 9 3 Slip Clutch for Table Auger 46
2 9 4 Transmission diagram, left-hand side 46
2 9 5 Transmission diagram, right-hand side 47
2 10 PowerFlow belts 48
2 10 1 PowerFlow belts 48
2 10 2 Inspection and Start-Up of PowerFlow Belts 48
2 10 3 Adjustment of belts 49
2 10 4 Cleaning 49
2 10 5 Table bottom 50
2 11 Scrapers 51
2 11 1 Scrapers,front 51
2 11 2 Scrapers, Rear, and Adjustment of Bearing Housings 51
2 12 Crop Lifters 52
2 12 1 Using Crop Lifters 52
2 13 Vertical Knives, Rape Auger and Straw Dividers 53
2 13 1 Vertical knife 53
2 13 2 Mounting of Vertical Knife 53
2 13 3 Rape Auger 54
2 13 4 Folding torpedo dividers and bow dividers 54
2 13 5 Mounting of Straw Dividers 55
2 13 6 Adjustment of Torpedo Divider 55
2 14 Fixed Fingers 56
2 14 1 Fitting of fixed table auger fingers 56
2 14 2 Using Fixed Table Auger Fingers 56
2 15 High Table Sides 57
2 15 1 High Table Sides 57
2 16 Hydraulics 58
2 16 1 Reel adjustment fore/aft – up/down 58
3 Lubrication and Maintenance 59
3 1 Lubrication Intervals 61
3 1 1 Lubrication chart, time intervals 61
3 1 2 Lubrication chart, right- and left-hand sides 61
3 1 3 Lubrication points, left-hand side 62
3 1 4 Lubrication points, right-hand side 65
3 1 5 Lubricants 67
3 2 Maintenance 68
3 2 1 Maintenance required 68
4 Storage 69
4 1 Storage 71
4 1 1 General 71
4 1 2 After harvest 71
4 1 3 Before the start of the new season 71
5 Specifications 73
5 1 Specifications 75
5 1 1 Technical specifications 75
1 General Information
1 1 Dear Customer 7
1 1 1 Appropriate use 7
1 1 2 Changes and improvements 7
1 1 3 Preface 7
1 1 4 EC declaration of conformity for table 8
1 1 5 Product identification 11
1 1 6 Sectional drawing and parts identification 11
1 2 Safety 13
1 2 1 General safety precautions 13
1 2 2 Attention -Warning Symbols 13
1 2 3 Safety precautions 13
1 2 4 Additional safety precautions 14
1 2 5 Before Start 15
1 2 6 Road transport 16
1 2 7 CE markings and type plate on the table 16
1 2 8 Warning/Instruction decals 21
1 2 9 Position of CE markings and type plate 22
IMAGES PREVIEW OF THE MANUAL:
VIDEO PREVIEW OF THE MANUAL:
PLEASE NOTE:
- This is the SAME exact manual used by your dealers to fix your vehicle.
- The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
- Any queries / doubts regarding your purchase, please feel free to contact [email protected]
S.M