FENDT 460plus Rotary Harvesting Unit OPERATOR’S MANUAL – PDF DOWNLOAD
DESCRIPTION:
FENDT 460plus Rotary Harvesting Unit OPERATOR’S MANUAL – PDF DOWNLOAD
Foreword
- READ THIS MANUAL carefully to learn how to operate and service your machine correctly. Failure to do so could result in personal injury or equipment damage. This manual and the safety signs on your machine may also be available in other languages (see your KEMPER dealer to order). THIS MANUAL SHOULD BE CONSIDERED
- a permanent part of your machine and should remain with the machine when you sell it. MEASUREMENTS IN THIS MANUAL are given in metric units. The customary U.S. unit equivalents are also quoted. Use only correct replacement parts and fasteners. Metric and inch fasteners may require a specific metric or inch wrench. RIGHT-
- HAND AND LEFT-HAND sides are determined by facing in the direction the implement will travel when going forward. THE TERM “TRANSPORT” refers to a rotary harvesting unit mounted on a forage harvester and transported from A to B on the forage harvester. THE TERM “HAULAGE” refers to a rotary harvesting unit loaded
- on a flatbed carrier and transported from A to B on the flatbed carrier. WRITE PRODUCT IDENTIFICATION NUMBERS (P.I.N.) in the Specification or Identification Numbers section. Please note all numbers exactly. In the event of theft, these numbers may prove vital in tracing your property. Your KEMPER dealer also needs these
- numbers when you order parts. File the identification numbers in a secure place off the engine or machine. BEFORE DELIVERING THIS MACHINE, your dealer performed a predelivery inspection. THIS ROTARY HARVESTING UNIT IS DESIGNED SOLELY for use in customary agricultural or similar operations (“INTENDED USE”). Use in any
- other way is considered as contrary to the intended use. The manufacturer accepts no liability for damage or injury resulting from this misuse, and these risks must be borne solely by the user. Compliance with and strict adherence to the conditions of operation, service and repair as specified by the manufacturer also constitute essential
- elements for the intended use. THIS ROTARY HARVESTING UNIT SHOULD BE operated, serviced and repaired only by persons familiar with all its particular characteristics and acquainted with the relevant safety rules (accident prevention). The accident prevention regulations, all other generally recognized regulations on safety and
- occupational medicine and the road traffic regulations must be observed at all times. Any arbitrary modifications carried out on this rotary h anufacturer of all liability for any resulting da for any resulting damage or injury
TABLE OF CONTENTS:
FENDT 460plus Rotary Harvesting Unit OPERATOR’S MANUAL – PDF DOWNLOAD
Identification View
Identification View00-1
Safety
Recognize Safety Information 05-1
Follow Safety Instructions05-1
Understand Signal Words05-1
Observe Road Traffic Regulations05-2
Use Safety Lights and Devices05-2
Prepare for Emergencies05-2
Wear Protective Clothing05-3
Check Machine Safety05-3
Guards and Shields 05-3
Stay Clear of Harvesting Unit 05-3
Keep Hands Away From Knives05-4
Store Attachments Safely 05-4
Practice Safe Maintenance05-5
Stay Clear of Rotating Drivelines05-6
Service Machines Safely 05-6
Support Machine Properly 05-7
Avoid High-Pressure Fluids 05-7
Stay Clear of the Intake Area 05-7
Transport with Harvesting Unit Installed05-8
Ballasting for Safe Ground Contact 05-8
Remove Paint Before Welding or Heating05-8
Avoid High-Pressure Jet on Safety Decals05-9
Replace Safety Signs 05-9
Dispose of Waste Properly 05-9
Safety Decals
Pictorial Safety Signs10-1
Operator’s Manual 10-1
Maintenance and Repair 10-1
Rotating Blades 10-2
Folding Area of the Rotary Harvesting Unit 10-2
Rotary Harvesting Unit 10-3
Rotating Drums10-3
Foldable Frame 10-4
Ha lage
Transport Pallet 15-1
Page
Hanging Points 15-1
Preparing the Rotary Harvesting Unit
Unpacking20-1
Remove Transport Pallet 20-1
Adapt the Scrapers to the Feed Passage20-1
Attaching to a CLAAS Forage Harvester
Compatibility Chart (Forage
Harvesters, Types 491, 492, 493 and 494) 25-1
Installation on the CLAAS Forage Harvester25-2
Connect Hydraulic Hoses 25-2
Connect the Drive (Type 492)25-3
Connect the Drive (Types 493 and 494)25-4
Attaching to a FENDT Forage Harvester
Align the Oscillating Frame28-1
Attach the Rotary Harvesting Unit to
FENDT Forage Harvesters 28-1
Connect Hydraulic Hoses and Wiring Harness 28-3
Uj Shaft 28-3
Connect UJ Shaft 28-3
Change the Hydraulic System 28-4
Unlock the Oscillating Frame28-5
Detaching the Rotary Harvesting Unit
Detach the Rotary Harvesting Unit 30-1
Transport
Transport Information 35-1
Folding the Rotary Harvesting Unit35-1
Close Safety Relief Valve (Rotary Harvesting Units for CLAAS Forage
Harvesters Only) 35-1
Accident Prevention35-2
Lock/Unlock Tilt Frame35-3
Operating the Rotary Harvesting Unit
Rotary Harvesting Unit Method of Operation40-1
Operating the Rotary Harvesting Unit –
General Use 40-2
Clear Blockages 40-2
Adjusting the Central Feed Bar 40-2
Gathering Drum Operating Speeds 40-3
Length-of-Cut Adjustment with CLA
Forage Harv
40-3
Length of Cut and Drum Speeds with CLAAS Forage Harvester 860-880
(Type 491) 40-4
Cutterhead with 24 Knives (Type 491) 40-4
Length of Cut and Drum Speeds with CLAAS Forage Harvester 830-900
(Type 492) 40-4
Cutterhead with 24 Knives (Type 492) 40-4
Cutterhead with 20 Knives (Type 492) 40-5
Length of Cut and Drum Speeds with CLAAS Forage Harvester 830-900
(Type 493) 40-5
Cutterhead with 28 Knives (Type 493) 40-6
Cutterhead with 24 Knives (Type 493) 40-8
Cutterhead with 20 Knives (Type 493) 40-10
Length of Cut and Drum Speeds with CLAAS Forage Harvester 930-980
(Type 494) 40-11
Cutterhead with 36 Knives (Type 494) 40-12
Cutterhead with 24 Knives (Type 494) 40-13
Harvest 40-14
Additional Equipment
Special Kit for Row Guidance (Steering
Assistance)45-1
Automatic Height Control Kit 45-1
Troubleshooting
460ᵖˡᵘˢ Rotary Harvesting Unit50-1
Lubrication and Maintenance
Service Intervals 55-1
Grease55-1
Fluid Grease for Drives55-1
Transmission Oil 55-2
Coolant for Main Drive Friction Clutch55-2
Alternative and Synthetic Lubricants 55-3
Mixing Lubricants55-3
Lubricant Storage 55-3
At the Start of Every Harvesting Season55-3
Use Genuine KEMPER Parts 55-4
At the Start of Every Harvesting
Season – Spherical Collar Bolts 55-4
At the Start of Every Harvesting Season—Gearbox Mounting Flange
Attaching Screws 55-5
General View of Drives and Oil Levels
in the Rotary Harvesting Unit 55-6
Every 10 Hours—Cleaners and Blade
Rotor Segments 55-7
Every 10 Hours—UJ Shaft 55-7
Every 50 Hours—Claw Clutch 55-7
Every 50 Hours—Lower Pin of Hydraulic Cylinder and Hinges of
the Outer Units 55-8
Page
Every 50 Hours—Upper Rolls of
Oscillating Frame 55-8
Every 3 Years—Change Coolant of
Main Drive Friction Clutch 55-9
After Each Harvesting Season 55-10
Maintenance
Metric Bolt and Screw Torque Values60-1
Relieve Pressure on the Main Drive
Slip Clutches 60-2
Disassemble Slip Clutch60-3
Installing New Rotating Blades60-4
Adjusting the Dividers60-5
Checking Scrapers Adjustment 60-6
Checking and Adjusting Cleaners 60-6
Cleaning Rotary Harvesting Unit 60-7
Storage
Storage at End of Harvesting Season 65-1
Start of New Season65-1
Specifications
460ᵖˡᵘˢ Rotary Harvesting Unit70-1
Sound Level70-1
EC Declaration of Conformity 70-2
Serial Numbers
Rotary Harvesting Unit Serial Number Plate 75-1
Serial Number75-1
IMAGES PREVIEW OF THE MANUAL:
VIDEO PREVIEW OF THE MANUAL:
PLEASE NOTE:
- This is the SAME exact manual used by your dealers to fix your vehicle.
- The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
- Any queries / doubts regarding your purchase, please feel free to contact [email protected]
S.M