FENDT 345plus 360plus 375plus and 390plus Rotary Harvesting Units OPERATOR’S MANUAL
DESCRIPTION:
FENDT 345plus 360plus 375plus and 390plus Rotary Harvesting Units OPERATOR’S MANUAL
Foreword
- READ THIS OPERATOR’S MANUAL carefully to learn how to operate and service your machine correctly. Failure to do so could result in personal injury or equipment damage. This rotary harvesting unit may be installed and operated on a forage harvester only. The user must be entitled to drive a forage harvester on public roads. This manual and safety signs on your
- machine are available in other languages. To order, see your KEMPER dealer. THIS MANUAL SHOULD BE CONSIDERED a permanent part of your machine and must remain with the machine when you sell it. MEASUREMENTS IN THIS MANUAL are given in metric units. The customary U.S. unit equivalents are also quoted. Only use components and bolts that fit.
- Metric and inch fasteners may require a specific metric or inch wrench. RIGHT-HAND AND LEFT-HAND sides are determined by facing in the direction the implement will travel when going forward. THE TERM “TRANSPORT” refers to a rotary harvesting unit mounted on a forage harvester and transported from A to B on the forage harvester. THE TERM
- “HAULAGE” refers to a rotary harvesting unit loaded on a flatbed carrier and transported from A to B on the flatbed carrier. LOADING AND HAULAGE of this rotary harvesting unit must be performed only by persons familiar with how the load is secured, and who can provide evidence of this. WRITE PRODUCT IDENTIFICATION NUMBERS (P.I.N.) in the Specification
- or Identification Numbers section. Record all numbers exactly. In the event of theft, these numbers may prove vital in tracing your property. Your KEMPER dealer needs these numbers when you order parts. File the identification numbers in a secure place away from machine. BEFORE DELIVERING THIS MACHINE, your dealer performed a predelivery inspection.
INTENDED USE: THIS ROTARY HARVESTING UNIT may be used ONLY for harvesting:
- thick-stemmed, flexible types of plant such as corn, elephant grass or bamboo
- thin-stemmed types of plant such as grain crop, mustard
Use in any other way is considered as contrary to the intended use. The manufacturer accepts no liability for damage or injury resulting from this misuse, and these risks must be borne solely by the user.
THIS ROTARY HARVESTING UNIT MUST NOT be used to manually transfer materials of any sort and is not suitable for the transfer and chopping of:
• woody plants with a diameter greater than 1 mm
• wood intended for chipping
• animal feed such as beets
• metallic objects
• materials that include stones
- Compliance with and strict adherence to the conditions of operation, service and repair as specified by the manufacturer also constitute essential elements for the INTENDED USE. THIS ROTARY HARVESTING UNIT MUST be serviced and repaired ONLY by industrial mechanics, fitters or persons with comparable qualifications.
- The electrical system must be repaired only by electricians. The accident prevention regulations, all other generally recognized regulations on safety and occupational medicine and the road traffic regulations must be observed at all times. It is not permitted to alter the machine to accept materials other than those permitted in its intended use.
- Any arbitrary modifications carried out on this rotary harvesting unit will relieve the manufacturer of all liability for any resulting damage or injury. THIS ROTARY HARVESTING UNIT MUST NOT be operated in the United States and Canada.
TABLE OF CONTENTS:
FENDT 345plus 360plus 375plus and 390plus Rotary Harvesting Units OPERATOR’S MANUAL
Pre-delivery Inspection
Predelivery Checklist CLIST-1
Delivery Checklist CLIST-1
After-Sale Checklist CLIST-2
Identification View
Identification View00-1
Safety Measures
Recognize Safety Information 05-1
Follow Safety Instructions05-1
Understand Signal Words05-1
Observe Road Traffic Regulations05-2
Use Safety Lights and Devices05-2
Prepare for Emergencies05-2
Wear Protective Clothing05-3
Check Machine Safety05-3
Avoid entanglement05-3
Guards and Shields 05-3
Stay Clear of Harvesting Unit 05-4
Keep Hands Away from Knives 05-4
Store Attachments Safely 05-4
Practice Safe Maintenance05-5
Stay Clear of Rotating Drivelines05-5
Service Machines Safely 05-6
Support Machine Properly 05-6
Avoid High-Pressure Fluids 05-6
Observe Maximum Permissible Front
Axle Load 05-7
Transport with Harvesting Unit Installed05-7
Ballasting for Safe Ground Contact 05-7
Remove Paint Before Welding or Heating05-8
Dispose of Waste Properly 05-8
Avoid High-Pressure Jet on Safety Decals05-8
Safety Decals
Pictorial Safety Signs10-1
Replace Safety Signs 10-1
Operator’s Manual 10-1
Repair and Maintenance 10-2
Rotating Blades 10-2
Folding Area 10-3
Rotating Drums10-3
Input Transmission 10-4
Page
Haulage
Transport Pallet 15-1
Loading with a Crane15-2
Loading Rotary Harvesting Unit on a
Truck or Trailer 15-3
Secure Rotary Harvesting Unit
(Lashing Points) 15-4
Attaching to a CLAAS Forage Harvester
Compatibility Chart 20-1
Ballasting Harvester 20-1
Adjusting Channel Width 20-2
Install Feed Plates 20-2
Attach to CLAAS Forage Harvesters
(Rotary Harvesting Units with Rigid
Attaching Frame)20-3
Attaching to CLAAS Forage Harvesters
(Rotary Harvesting Units with
Oscillating Frame) 20-6
Rotary Harvesting Units with
Multi-Speed Transmission and
Quick Coupler 20-7
Connect Hydraulic Hoses 20-8
Connecting the Wiring Harness for
Flashing Warning Lights (Optional
on 375plus, Standard on 390plus) 20-8
Connecting the Drive (Forage
Harvester Type 492)20-9
Connecting the Drive (Forage
Harvester Types 493, 494 and 497)20-10
Connecting the Drive (Forage
Harvester Type 496)20-13
Replace CLAAS Tray with KEMPER Tray20-16
Attaching to a KRONE Forage Harvester
Compatibility Chart 22-1
Remove Transport Straps 22-2
Attaching to KRONE Forage
Harvesters (Models BIG X 480, 530,
580 and 630) 22-2
Attaching to KRONE Forage
Harvesters (Models BIG X 500, 600,
650, 700, 770, 800, 850, 1000 and 1100) 22-8
Connect Clearance and Indicator Light
Wiring Harness (375plus and 390plus) 22-11
Switch Off Reverse when Idling 22-11
Attaching to a FENDT Forage Harvester
Align the Oscillating Frame23-1
Attach the Rotary Harvesting Unit to
FENDT Forage Harvesters 23-1
Connect Hydraulic Hoses and Wiring Harness 23-3
Uj Shaft 23-3
Connect the Uj Shaft 23-3
Change the Hydraulic System 23-4
Unlock the Oscillating Frame23-5
Detaching the Rotary Harvesting Unit
Install Front Jackstands (Rotary
Harvesting Units for KRONE Forage
Harvesters Only) 25-1
Detach Rotary Harvesting Unit 25-1
Transport
Driving on Public Roads 30-1
Apply Decal (Rotary Harvesting Units
with Support Wheel)30-1
Rotary Harvesting Units with Comfort
Support Wheel 30-2
Accident Prevention (Rotary
Harvesting Units with Lateral
Protective Brackets) 30-3
Accident Prevention (Rotary
Harvesting Units without Lateral
Protective Brackets) 30-4
Lock/Unlock Tilt Frame (Rotary
Harvesting Units for CLAAS Forage
Harvesters Only) 30-6
Operating the Rotary Harvesting Unit
Rotary Harvesting Unit Method of Operation35-1
Operating the Rotary Harvesting Unit –
General Use 35-2
Clear Blockages 35-2
Clear Blockages on CLAAS Forage
Harvesters35-2
Gathering Drum Operating Speeds 35-3
Length-of-Cut Adjustment with CLAAS
Forage Harvester 35-3
Length of Cut and Drum Speeds with
CLAAS Forage Harvester 830-900
(Types 492 and 496) 35-4
Length of Cut and Drum Speeds with
CLAAS Forage Harvester 830-900
(Type 493) 35-5
Length of Cut and Drum Speeds with
CLAAS Forage Harvester 930-980
(Types 494 and 497) 35-10
Adjusting Gear Selection with
Multi-Speed Drive for CLAAS
Forage Harvesters 35-13
Page
Lengths of Cut and Gear Selection
with Multi-Speed Drive for CLAAS
Forage Harvesters 35-15
Calibrate Steering Assistance (Rotary
Harvesting Units for CLAAS Forage
Harvesters)35-15
Harvesting – General 35-16
Harvesting Whole-Crop Silage 35-16
Hydraulic System35-17
Additional Equipment
Special Kit for Row Guidance (Steering
Assistance)40-1
Automatic Height Control Kit 40-1
Troubleshooting
Correction of Defects on the Rotary
Harvesting Unit45-1
Lubrication and Maintenance
Service Intervals 50-1
Grease50-1
Fluid Grease for Drives50-1
Transmission Oil50-2
Coolant for Main Drive Friction Clutch50-2
Alternative and Synthetic Lubricants 50-3
Mixing Lubricants50-3
Lubricant Storage 50-3
Use Genuine KEMPER Parts 50-3
Overview of Transmissions and Oil
Levels (Part 1)50-4
Overview of Transmissions and Oil
Levels (Part 2)50-5
Overview of Oil Levels in Input Transmission50-7
Changing Oil50-8
Every 10 Hours – Rotating Blades and
Cleaners50-8
Every 10 Hours – UJ Shaft50-8
Every 10 Hours—Lower Rolls of
Oscillating Frame 50-9
Every 50 Hours – Axle Pins and Hinges
(390plus Only)50-9
Every 50 Hours – Clutch Claws50-9
Every 50 Hours – Hinges of Outer
Sections (390plus) 50-10
Every 50 Hours – Hinges of Outer
Sections (360plus, 375plus and 345plus) 50-10
Every 50 Hours – Hydraulic Cylinder
Axle Pins (390plus Only) 50-11
Every 50 Hours – Upper Rolls of
Oscillating Frame 50-11
Every 3 Years—Change Coolant of
Main Drive Friction Clutch 50-12
At the Start of Every Harvesting Season 50-12
Daily Maintenance (Or More Often if
Necessary) 50-12
Weekly Service50-13
After Each Harvesting Season 50-13
Maintenance
Metric Bolt and Screw Torque Values55-1
Relieve Pressure on the Main Drive
Slip Clutches 55-2
Removal of Slip Clutch 55-3
Disassemble Slip Clutch55-5
Install New Rotating Blades55-6
Adjusting Dividers55-7
Checking Scraper Adjustment 55-8
Checking Cleaners 55-8
Adjust the Cleaners on the Feeder
House Drums 55-9
Check Steering Sensor Voltage
Readings (Rotary Harvesting Units
for CLAAS forage harvesters) 55-9
Cleaning Rotary Harvesting Unit 55-10
Storage
Storage at End of Harvesting Season 60-1
Removing Harvesting Unit from Storage 60-1
Specifications
Machine Design Life 65-1
345plus Rotary Harvesting Unit65-1
360plus Rotary Harvesting Unit65-1
375plus Rotary Harvesting Unit65-2
390plus Rotary Harvesting Unit65-2
Sound Level65-2
EC Declaration of Conformity 65-3
Serial Number
Rotary Harvesting Unit Serial Number Plate 70-1
Serial Number70-1
IMAGES PREVIEW OF THE MANUAL:
VIDEO PREVIEW OF THE MANUAL:
PLEASE NOTE:
- This is the SAME exact manual used by your dealers to fix your vehicle.
- The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
- Any queries / doubts regarding your purchase, please feel free to contact [email protected]
s.m