FENDT 345plus 360plus 375plus and 390plus Rotary Harvesting Units Operator’s Manual – PDF DOWNLOAD
DESCRIPTION:
FENDT 345plus 360plus 375plus and 390plus Rotary Harvesting Units Operator’s Manual – PDF DOWNLOAD
Foreword
- READ THIS OPERATOR’S MANUAL carefully to learn how to operate and service your machine correctly. Failure to do so could result in personal injury or equipment damage. This rotary harvesting unit may be installed and operated on a forage harvester only. The user must be entitled to drive a forage harvester on public roads. This manual and safety signs on your machine are available in other languages. To order, see your KEMPER dealer.
- THIS MANUAL SHOULD BE CONSIDERED a permanent part of your machine and must remain with the machine when you sell it. MEASUREMENTS IN THIS MANUAL are given in metric units. The customary U.S. unit equivalents are also quoted. Only use components and bolts that fit. Metric and inch fasteners may require a specific metric or inch wrench. RIGHT-HAND AND LEFT-HAND sides are determined by facing in the direction the implement will travel when going forward.
- THE TERM “TRANSPORT” refers to a rotary harvesting unit mounted on a forage harvester and transported from A to B on the forage harvester. THE TERM “HAULAGE” refers to a rotary harvesting unit loaded on a flatbed carrier and transported from A to B on the flatbed carrier. LOADING AND HAULAGE of this rotary harvesting unit must be performed only by
- persons familiar with how the load is secured, and who can provide evidence of this. WRITE PRODUCT IDENTIFICATION NUMBERS (P.I.N.) in the Specification or Identification Numbers section. Record all numbers exactly. In the event of theft, these numbers may prove vital in tracing your property. Your KEMPER dealer needs these numbers when you order parts. File the identification numbers in a secure place away from machine. BEFORE DELIVERING THIS MACHINE, your dealer performed a predelivery inspection.
INTENDED USE: THIS ROTARY HARVESTING UNIT may be used ONLY for harvesting:
- thick-stemmed, flexible types of plant such as corn, elephant grass or bamboo
- thin-stemmed types of plant such as grain crop, mustard
Use in any other way is considered as contrary to the intended use. The manufacturer accepts no liability for damage or injury resulting from this misuse, and these risks must be borne solely by the user
THIS ROTARY HARVESTING UNIT MUST NOT be used to manually transfer materials of any sort and is not suitable for the transfer and chopping of:
• woody plants with a diameter greater than 1 mm
• wood intended for chipping
• animal feed such as beets
• metallic objects
• materials that include stones
- Compliance with and strict adherence to the conditions of operation, service and repair as specified by the manufacturer also constitute essential elements for the INTENDED USE. THIS ROTARY HARVESTING UNIT MUST be serviced and repaired ONLY by industrial mechanics, fitters or persons with comparable qualifications. The electrical system must be
- repaired only by electricians. The accident prevention regulations, all other generally recognized regulations on safety and occupational medicine and the road traffic regulations must be observed at all times. It is not permitted to alter the
- machine to accept materials other than those permitted in its intended use. Any arbitrary modifications carried out on this rotary harvesting unit will relieve the manufacturer of all liability for any resulting damage or injury. THIS ROTARY HARVESTING UNIT MUST NOT be operated in the United States and Canada.
TABLE OF CONTENTS:
FENDT 345plus 360plus 375plus and 390plus Rotary Harvesting Units Operator’s Manual – PDF DOWNLOAD
Pre-delivery Inspection
Predelivery Checklist CLIST-1
Delivery Checklist .CLIST-1
After-Sale Checklist CLIST-2
Identification View
Identification View.00-1
Safety Measures
Recognize Safety Information 05-1
Follow Safety Instructions.05-1
Understand Signal Words.05-1
Observe Road Traffic Regulations05-2
Use Safety Lights and Devices.05-2
Prepare for Emergencies05-2
Wear Protective Clothing05-3
Check Machine Safety05-3
Avoid entanglement05-3
Guards and Shields 05-3
Stay Clear of Harvesting Unit .05-4
Keep Hands Away from Knives 05-4
Store Attachments Safely .05-4
Practice Safe Maintenance.05-5
Stay Clear of Rotating Drivelines05-5
Service Machines Safely 05-6
Support Machine Properly 05-6
Avoid High-Pressure Fluids 05-6
Observe Maximum Permissible Front
Axle Load .05-7
Transport with Harvesting Unit Installed.05-7
Ballasting for Safe Ground Contact 05-7
Remove Paint Before Welding or Heating05-8
Dispose of Waste Properly .05-8
Avoid High-Pressure Jet on Safety Decals.05-8
Safety Decals
Pictorial Safety Signs10-1
Replace Safety Signs .10-1
Operator’s Manual 10-1
Repair and Maintenance 10-2
Rotating Blades 10-2
Folding Area .10-3
Rotating Drums.10-3
Input Transmission .10-4
Page
Haulage
Transport Pallet 15-1
Loading with a Crane15-2
Loading Rotary Harvesting Unit on a
Truck or Trailer .15-3
Secure Rotary Harvesting Unit
(Lashing Points) .15-4
Attaching to a CLAAS Forage Harvester
Compatibility Chart .20-1
Ballasting Harvester .20-1
Adjusting Channel Width 20-2
Install Feed Plates 20-2
Attach to CLAAS Forage Harvesters
(Rotary Harvesting Units with Rigid
Attaching Frame)20-3
Attaching to CLAAS Forage Harvesters
(Rotary Harvesting Units with
Oscillating Frame) 20-6
Rotary Harvesting Units with
Multi-Speed Transmission and
Quick Coupler 20-7
Connect Hydraulic Hoses .20-8
Connecting the Wiring Harness for
Flashing Warning Lights (Optional
on 375plus Standard on 390plus) .20-8
Connecting the Drive (Forage
Harvester Type 492).20-9
Connecting the Drive (Forage
Harvester Types 493 494 and 497).20-10
Connecting the Drive (Forage
Harvester Type 496).20-13
Replace CLAAS Tray with KEMPER Tray20-16
Attaching to a KRONE Forage Harvester
Compatibility Chart .22-1
Remove Transport Straps 22-2
Attaching to KRONE Forage
Harvesters (Models BIG X 480 530
580 and 630) 22-2
Attaching to KRONE Forage
Harvesters (Models BIG X 500 600
650 700 770 800 850 1000 and 1100) 22-8
Connect Clearance and Indicator Light
Wiring Harness (375plus and 390plus) 22-11
Switch Off Reverse when Idling 22-11
Attaching to a FENDT Forage Harvester
Align the Oscillating Frame.23-1
Attach the Rotary Harvesting Unit to
FENDT Forage Harvesters 23-1
Connect Hydraulic Hoses and Wiring Harness 23-3
U.j. Shaft 23-3
Connect the U.j. Shaft 23-3
Change the Hydraulic System 23-4
Unlock the Oscillating Frame23-5
Detaching the Rotary Harvesting Unit
Install Front Jackstands (Rotary
Harvesting Units for KRONE Forage
Harvesters Only) 25-1
Detach Rotary Harvesting Unit .25-1
Transport
Driving on Public Roads .30-1
Apply Decal (Rotary Harvesting Units
with Support Wheel).30-1
Rotary Harvesting Units with Comfort
Support Wheel .30-2
Accident Prevention (Rotary
Harvesting Units with Lateral
Protective Brackets) .30-3
Accident Prevention (Rotary
Harvesting Units without Lateral
Protective Brackets) .30-4
Lock/Unlock Tilt Frame (Rotary
Harvesting Units for CLAAS Forage
Harvesters Only) 30-6
Operating the Rotary Harvesting Unit
Rotary Harvesting Unit Method of Operation35-1
Operating the Rotary Harvesting Unit –
General Use .35-2
Clear Blockages .35-2
Clear Blockages on CLAAS Forage
Harvesters35-2
Gathering Drum Operating Speeds 35-3
Length-of-Cut Adjustment with CLAAS
Forage Harvester .35-3
Length of Cut and Drum Speeds with
CLAAS Forage Harvester 830-900
(Types 492 and 496) 35-4
Length of Cut and Drum Speeds with
CLAAS Forage Harvester 830-900
(Type 493) 35-5
Length of Cut and Drum Speeds with
CLAAS Forage Harvester 930-980
(Types 494 and 497) 35-10
Adjusting Gear Selection with
Multi-Speed Drive for CLAAS
Forage Harvesters .35-13
Page
Lengths of Cut and Gear Selection
with Multi-Speed Drive for CLAAS
Forage Harvesters .35-15
Calibrate Steering Assistance (Rotary
Harvesting Units for CLAAS Forage
Harvesters).35-15
Harvesting – General 35-16
Harvesting Whole-Crop Silage .35-16
Hydraulic System35-17
Additional Equipment
Special Kit for Row Guidance (Steering
Assistance).40-1
Automatic Height Control Kit 40-1
Troubleshooting
Correction of Defects on the Rotary
Harvesting Unit.45-1
Lubrication and Maintenance
Service Intervals .50-1
Grease50-1
Fluid Grease for Drives.50-1
Transmission Oil.50-2
Coolant for Main Drive Friction Clutch50-2
Alternative and Synthetic Lubricants 50-3
Mixing Lubricants50-3
Lubricant Storage .50-3
Use Genuine KEMPER Parts 50-3
Overview of Transmissions and Oil
Levels (Part 1)50-4
Overview of Transmissions and Oil
Levels (Part 2)50-5
Overview of Oil Levels in Input Transmission.50-7
Changing Oil.50-8
Every 10 Hours – Rotating Blades and
Cleaners.50-8
Every 10 Hours – U.J. Shaft50-8
Every 10 Hours—Lower Rolls of
Oscillating Frame .50-9
Every 50 Hours – Axle Pins and Hinges
(390plus Only)50-9
Every 50 Hours – Clutch Claws.50-9
Every 50 Hours – Hinges of Outer
Sections (390plus) .50-10
Every 50 Hours – Hinges of Outer
Sections (360plus 375plus and 345plus) 50-10
Every 50 Hours – Hydraulic Cylinder
Axle Pins (390plus Only) 50-11
Every 50 Hours – Upper Rolls of
Oscillating Frame . 50-11
Every 3 Years—Change Coolant of
Main Drive Friction Clutch 50-12
At the Start of Every Harvesting Season 50-12
Daily Maintenance (Or More Often if
Necessary) .50-12
Weekly Service.50-13
After Each Harvesting Season .50-13
Maintenance
Metric Bolt and Screw Torque Values.55-1
Relieve Pressure on the Main Drive
Slip Clutches 55-2
Removal of Slip Clutch .55-3
Disassemble Slip Clutch.55-5
Install New Rotating Blades55-6
Adjusting Dividers.55-7
Checking Scraper Adjustment 55-8
Checking Cleaners .55-8
Adjust the Cleaners on the Feeder
House Drums .55-9
Check Steering Sensor Voltage
Readings (Rotary Harvesting Units
for CLAAS forage harvesters) 55-9
Cleaning Rotary Harvesting Unit 55-10
Storage
Storage at End of Harvesting Season 60-1
Removing Harvesting Unit from Storage 60-1
Specifications
Machine Design Life .65-1
345plus Rotary Harvesting Unit65-1
360plus Rotary Harvesting Unit65-1
375plus Rotary Harvesting Unit65-2
390plus Rotary Harvesting Unit65-2
Sound Level65-2
EC Declaration of Conformity .65-3
Serial Number
Rotary Harvesting Unit Serial Number Plate 70-1
Serial Number.70
IMAGES PREVIEW OF THE MANUAL:
VIDEO PREVIEW OF THE MANUAL:
PLEASE NOTE:
- This is the SAME exact manual used by your dealers to fix your vehicle.
- The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
- Any queries / doubts regarding your purchase, please feel free to contact [email protected]
S.M