Fassi Crane F 480A.24 Use and Maintenance Manual
FILE DETAILS:
Fassi Crane F 480A.24 Use and Maintenance Manual
Language : English
Pages : 61
Downloadable : YES
Format : PDF
Size : 0.98 MB
Serial No : 3001
DESCRIPTION:
Fassi Crane F 480A.24 Use and Maintenance Manual
INTRODUCTION:
The fitment of the crane on the vehicle must be carried out in accordance with the instructions given by FASSI in the manual for hydraulic crane fitting and the relevant chassis manufacturers directives. The Manufacturer declines all responsibility and guarantee if the fitting is entrusted to workshops without sufficient technical capability to carry out the work in conformity. Be sure that the unit has been installed, inspected and tested in accordance with the local legal requirements.
- As well as the principal safety norms, this manual contains a description of the crane and the instructions for use and maintenance. The following instructions refer to mobile cranes in general and must be integrated with the manual for use supplied by the centre responsible for the crane fitting on truck, vehicle or other type of structure.
- READ THIS MANUAL CAREFULLY prior to use or any maintenance. A few minutes spent now could save time and labour later. Always conform to the safety norms and the instructions for use and maintenance contained in the present manual in order to guarantee a long life to the crane.
TABLE OF CONTENTS:
Fassi Crane F 480A.24 Use and Maintenance Manual
INDEX OF PARAGRAPHS
A0 INTRODUCTION
B0 SAFETY NORMS
C0 WARNING AND INSTRUCTIONS
C0.1 Before operating
C0.2 During operation
C0.3 At the end of the operation (Prior to driving the vehicle)
D0 CLASSIFICATION OF THE CRANE MODEL
D0.1 Technical data
D1 IDENTIFICATION OF THE CRANE MODEL
D1.1 Crane mark
D1.2 Crane mark
E0 CRANE NOMENCLATURE
E0.1 Crane with ground controls
E0.2 Crane with top seat controls and with ground controls for outriggers
F0 NOMENCLATURE OF THE SAFETY AND PROTECTION DEVICES
F0.1 Crane with ground controls
F0.2 Crane with top seat controls and with ground controls for outriggers
F1 NOMENCLATURE OF THE SAFETY AND PROTECTION DEVICES
F1.1 Crane with ground controls
F1.2 Crane with top seat controls and with ground controls for outriggers
G0 SUPPLEMENTARY BEAMS
G0.1 Identification of the supplementary beams
G1 TILTABLE OUTRIGGER RAMS
G2 MANOEUVRES AND CONTROLS TO STABILIZE THE VEHICLE
G2.1 Functions of control levers for stabilization
G2.2 Controls to stabilize the vehicle
G2.3 Bilateral controls to stabilize the vehicle
1 Edition 10.11.2000
H0 CONTROLS TO OPERATE THE CRANE
H0.1 Manoeuvres to unfold the crane into a working condition
H0.2 Manoeuvres to fold the crane into the rest condition
H1 MANOEUVRES OF THE CRANE LOADS
H1.1 Lifting moment limiting device “intelligent type”
H1.2 Lifting moment limiting device for two working sectors (optional)
H1.3 Rotation limiting device
H1.4 Control panels
H1.5 Emergency tap lever of the lifting moment limiting device
H2 MANOEUVRES OF THE CRANE LOADS
H2.1 Lifting moment limiting device “intelligent type” (optional)
H2.2 Emergency tap lever of the lifting moment limiting device
L0 USE OF IMPLEMENTS
L0.1 Hydraulic connections for implements – supplementary hoses
L1 MANUAL EXTENSIONS
L2 CONTROLS TO OPERATE THE HYDRAULIC IMPLEMENTS OF THE CRANE
L3 WINCH
L3.1 Winch for crane
L3.2 Winch for crane
L4 HYDRAULIC JIBS
L4.1 Identification of the hydraulic jib
L4.2 Nomenclature of the hydraulic jib
L4.3 Manoeuvres to unfold the jib in working condition
L4.4 Manoeuvres to fold the jib in rest condition
L4.5 Operations to remove the hydraulic jib from the crane
L4.6 Operations to mount the hydraulic jib on the crane
M0 MAINTENANCE INSTRUCTIONS
M0.1 At the end of every working day
M0.2 After the first 40 hours use
M0.3 After every working week
M0.4 After every 500 working hours
M0.5 Complete overhaul of the crane
N0 TABLE OF HYDRAULIC OIL AND LUBRICANTS CHARACTERISTICS
P0 POSSIBLE FAULTS
P0.1 Operations which can be carried out by the user
P0.2 Operations to be carried out by a service center
R0 INSTRUCTION AND WARNING PLATES
S0 HYDRAULIC SCHEMATICS FOR CRANE
S1 HYDRAULIC SCHEMATICS FOR CRANE
T0 ELECTRIC SCHEMATICS FOR CRANE
T1 ELECTRIC SCHEMATICS FOR CRANE
V0 CAPACITY PLATES FOR CRANE WITH
2 LIFTING MOMENT LIMITING DEVICE
VIDEO PREVIEW OF THE MANUAL:
IMAGES PREVIEW OF THE MANUAL:
PLEASE NOTE:
- This is the SAME manual used by the dealers to troubleshoot any faults in your vehicle. This can be yours in 2 minutes after the payment is made.
- Contact us at [email protected] should you have any queries before your purchase or that you need any other service / repair / parts operators manual.