CNH WX185 Tier 3 Wheeled Excavator 84198695 Add-On Nibbler and Breaker Installation Instructions Manual 84198691 EN_DE_IT_FR_ES – PDF DOWNLOAD
DESCRIPTION:
CNH WX185 Tier 3 Wheeled Excavator 84198695 Add-On Nibbler and Breaker Installation Instructions Manual 84198691 EN_DE_IT_FR_ES – PDF DOWNLOAD
PRE-ASSEMBLY
PREPARING FOR ASSEMBLY
Preparation
Before performing the operations to install the nibbler and
breaker system, proceed as follows:
1. Park the machine on a level surface.
2. Position the front attachment as indicated in figure.
3. Lower the blade and the stabilizers to the ground.
4. Lock the upper structure.
5. Apply the parking brake.
6. Shut off the engine.
7. To allow all cylinders to release pressure lower the
safety lever, set the starter switch key again to position
I, move both hydraulic control hand levers and the
pedal in all directions. Press the brake pedal to discharge
the accumulators of brake system.
8. Rest the bucket to the ground.
9. Place the safety lever in “LOCK” position.
10. Set the starter switch key to position 0 and pull it out.
11. Place some wedges under the wheels so as to prevent
the machine from moving.
12. Wait for the machine to cool off.
IMAGES PREVIEW OF THE MANUAL:
TABLE OF CONTENTS:
CNH WX185 Tier 3 Wheeled Excavator 84198695 Add-On Nibbler and Breaker Installation Instructions Manual 84198691 EN_DE_IT_FR_ES – PDF DOWNLOAD
1 SAFETY INFORMATION
Safety rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
2 KIT CONTENT
Kit overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
3 PRE-ASSEMBLY
PREPARING FOR ASSEMBLY
Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
4 ASSEMBLY
Hydraulic breaker and Nibbler attachment
Hammer shears selection valve – Install. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
Control valve auxiliary block – Install . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
Hammer shears pilot valve hoses – Install. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Hammer system lines – Install . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8
Hammer shears boom lines – Install. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9
Dipper lines installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11
Electronic pedal – Install . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12
Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-13
5 POST-ASSEMBLY
INSTRUCTIONS
Function activation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6
PLEASE NOTE:
- This is the same manual used by the dealers to diagnose and troubleshoot your vehicle
- You will be directed to the download page as soon as the purchase is completed. The whole payment and downloading process will take anywhere between 2-5 minutes
- Need any other service / repair / parts manual, please feel free to contact [email protected] . We still have 50,000 manuals unlisted
S.V