CLAAS VOLTO 1050 T Conversion Instructions and operator´s manual_DE_FR_NL_IT_EN
DESCRIPTION:
CLAAS VOLTO 1050 T Conversion Instructions and operator´s manual_DE_FR_NL_IT_EN
Introduction
This manual provides information on the use, setting and servicing of the CLAAS rotary tedder. The advice on the care and servicing should be followed in order to obtain maximum performance and long service. The assembly and the regular inspection of your machine should be performed by your specialist workshop. Neglect in maintenance and service and incorrect use will result in poor machine efficiency and loss of valuable time. By correct operation and servicing you can make full use of the technical knowledge and experience with which your machine has been designed.
Important
- The instructions contained in this manual should be read carefully and observed by all persons concerned with the operation, maintenance and inspection of this machine in order to prevent accidents. Especially the »Safety Rules« and the »Prior to Operation« sections should be read with the utmost care and adhered to.
- The use of spare parts, accessories and ancillary equipment which are not originally manufactured or not checked and approved by CLAAS, can change the specified design characteristics of the CLAAS machine or can detract from its functional performance with a possible adverse effect on the active and/or passive safety of the machine and its occupational safety standards (accident prevention).
- CLAAS are in no way liable for any damage or personal injury caused through the use of other than original or approved CLAAS parts, accessories and ancillary equipment.
- Technical data, dimensions and weights are given as an indication only. CLAAS reserve the right to make changes subsequently as technical developments continue.
- Responsability for errors and omissions not accepted. Front, rear, right and left refer to the direction of travel.
TABLE OF CONTENTS:
CLAAS VOLTO 1050 T Conversion Instructions and operator´s manual_DE_FR_NL_IT_EN
Introduction 1
Identification plate 7
Safety Advice11
Safety decals with warning symbols 23
1 Technical data
Technical data 1 3
2 Before operation
Montage 2 2
Before Using the Machine 2 4
Attachement to the tractor 2 6
PTO Shaft 2 6
Hydraulic connection 210
Storing the Machine212
Pullropes 212
Prior to Transportation 212
Transport on Public Roads 214
3 Operation
Operation 3 2
Working Position 3 2
Transport Position 3 4
Ensuring Against the Loss of a Tine 3 8
Varying the Spreading Angle 310
Adjusting the Working Height 312
Tine Pitch Adjustment 312
Setting the Rotary Tedder into Operation 314
Possibilities of Use 314
Working Close to the Edge of the Field314
Using the deflector cloth when turning 316
Tedding 318
Windrow spreading 318
Turning 318
Swath-turning318
Windrowing 318
Optional equipment320
Reduction gear 320
Ensuring against the lost of a tine 320
Deflector cloth 320
Hydraulic couplings for the tractor 322
Adapter for USA road lighting 322
4 Maintenance
Maintenance Instructions 4 3
Drive Systems4 8
Main gearbox 4 8
Reduction gearbox4 8
PTO Drive Shaft410
Hydraulic 410
Hydraulic hoses 410
Position of tine bars 413
Machine adjustment 414
Adjusting the stroke limiting valve 414
Adjusting the supports for the lateral
carrier arms 414
Adjusting the wire rope 416
Hitch yoke 416
Screw Connections416
Spring Tine Securing Bolts 416
Connecting elements 418
Tyres 418
End of Season Storage418
Problems420
5 Lubrication Chart
IMAGES PREVIEW OF THE MANUAL:
VIDEO PREVIEW OF THE MANUAL:
PLEASE NOTE:
- This is the SAME exact manual used by your dealers to fix your vehicle.
- The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
- Any queries / doubts regarding your purchase, please feel free to contact [email protected]
S.M