Challenger Articulated Tractor MT955E MT965E MT975E Operator’s Manual 569591D1B – PDF DOWNLOAD
IMAGES PREVIEW OF THE MANUAL:
DESCRIPTION:
Challenger Articulated Tractor MT955E MT965E MT975E Operator’s Manual 569591D1B – PDF DOWNLOAD
МТ955Е
AGCC0955.F … 1001-
MT965E
AGCC0965.F … 1001-
МТ975Е
AGCC0975.F … 1001
- This operator manual uses the latest information available at the time of publication. Read the operator manual carefully before operating the machine. Right-hand and left-hand, as used in the operator manual, is determined Ьу facing the direction that the machine travels when in use.
- Photos, illustrations, and data used in the operator manual were current at the time of publishing. Because of possible production changes, each machine сап vary. Manufacturer reserves the right to redesign and change the machine as necessary without notification.
Important safety information :
Failure to оЬеу basic safety rules and precautions сап cause personal injuries during product operation, maintenance, ог repair. Know dangerous situations before ап injury occurs. А person must Ье alert to possible dangers. This person must also have the necessary training, skills and tools to do these operations correctly.Incorrect operation, lubrication, maintenance ог repair of this product сап Ье dangerous and сап result in injury ог death.
- Read and understand all the information about the operation, lubrication, maintenance, and repair before operating оп this machine. The product and this manual give safety precautions and warnings. Bodily injury ог death сап occur to you ог to other persons if all warnings аге not heeded. Not every possible circumstance that сап involve а potential danger сап Ье anticipated.
- The warnings in this publication and оп the product аге, thus, not all inclusive. If а tool ог procedure, not recommended Ьу AGCO, is used, make sure they аге safe for everyone. Ап operator must make sure the product will not Ье dangerous ог damaged Ьу the operation, lubrication, maintenance ог repair procedures selected. Information, specifications, and illustrations in this publication come from information available at the time of publication production.
- Specifications, torques, pressures, measurements, adjustments, illustrations, and other items сап change at any time. These changes сап change the service that is given to the product. Get the complete and most current information before starting а job. AGCO dealers have the most current information available.
TABLE OF CONTENTS:
Challenger Articulated Tractor MT955E MT965E MT975E Operator’s Manual 569591D1B – PDF DOWNLOAD
1 Safety 11
1 1 Safety information 1 з
1 1 1 Operator Manual 1 З
1 1 2 lmportant safety information 1 3
1 1 3 Safety alert symbol 1 4
1 1 4 Safety messages 1 4
1 1 5 lnformational messages 1 4
1 1 6 Safety signs 1 4
1 1 7 General hazard information 1 5
1 1 8 Pressurized air 16
1 1 9 Asbestos information 16
1 1 1 О Electrical storm injury prevention 16
1 1 1 1 Mounting and dismounting the machine 16
1 1 1 2 Before starting the engine 17
1 1 1 3 Engine starting 17
1 1 1 4 Before operation 17
1 1 1 5 Operating procedures 17
1 1 16 Parking 1 8
1 1 17 Operator station 1 8
1 1 1 8 Cut and crushing prevention 1 9
1 1 1 9 Rollover protective structure 1 9
1 1 20 Batteries 20
1 1 21 Burn prevention 21
1 1 22 Coolant 21
1 1 23 Oils 21
1 1 24 High pressure lines 21
1 1 25 Fluid penetration 22
1 1 26 Exhaust fumes 22
1 1 27 Noise prevention 23
1 1 28 Fire and explosion prevention 23
1 1 29 Fire extinguisher 24
1 1 30 PuЫic road transportation 24
1 2 Safety signs and labels 25
1 2 1 Safety signs and labels 25
1 3 Warning signs 26
1 3 1 Warning – Battery explosion 27
1 3 2 Warning – Belt entanglement 27
1 3 3 Warning – Ether 27
1 3 4 Warning – Fall off hazard 28
1 3 5 Warning – High pressurized fluid 28
1 3 6 Warning – Hot pressurized coolant 29
1 3 7 Warning – Hot surface 29
1 3 8 Warning – No passengers 29
1 3 9 Warning – Operators Manual 30
1 3 1 О Warning – Radar 30
1 3 1 1 Warning – Rear view 30
1 3 1 2 Warning – Seatbelt 30
1 3 1 3 Warning – bystander alert 3 1
1 4 Danger signs 32
1 4 1 Danger – Power take off 3 3
1 4 2 Danger hazard – Rear roll over 3 3
1 4 3 Danger hazard – Starter bypass 3 3
Articulated Tractor
569591018
ТаЬ!е of contents
1 5 lnformational signs 34
1 5 1 lnformational signs 3 5
1 5 2 lnformational – Alternate exit 3 6
1 5 3 lnformational – Battery 3 6
1 5 4 lnformational – Diesel exhaust fluid filter 3 6
1 5 5 lnformational – Fuel filter 3 6
1 5 6 lnformational – Lift point 3 7
1 5 7 lnformational – No step 3 7
1 5 8 lnformational – Separator fuel filter 3 7
1 5 9 lnformational – Tiedown 3 7
1 5 1О lnformational – Emergency brake 3 8
1 5 1 1 lnformational – Belt routing 3 8
1 5 1 2 lnformational – Hydraulic control valves 3 8
1 5 1 3 lnformational – Engine oil 3 8
1 5 14 lnformational – Engine oil filter 3 9
1 5 15 lnformational – Prevent static discharge when fueling 3 9
1 5 16 lnformational – Engine air cleaner 3 9
1 5 17 lnformational – СаЬ air conditioning 4 0
1 5 18 lnformational – 1 2 volt 4 0
1 5 19 lnformational – Transmission fluid fill 4 0
1 5 20 lnformational – Transmission oil level 4 0
1 5 2 1 lnformational – fuel 4 1
2 lntroduction 43
2 1 Machine identification МТ900Е 45
2 2 Serial number definition 46
2 3 lntended use 47
2 4 Proper disposal of waste 48
2 5 Pre-Delivery 49
2 5 1 Pre-delivery checklist 4 9
3 Operation 51
3 1 Walk-around inspection 55
3 2 Starting engine 57
3 2 1 Pre-start checks 5 7
3 2 2 Engine starting 5 7
3 2 3 Engine starting in normal conditions 5 7
3 2 4 Engine starting with jumper саЫеs 5 8
3 3 Engine start switch 59
3 4 Engine operation with по load or low load 60
3 5 Monitor mounting 61
3 6 Lamp switches 62
3 6 1 Multifunction light switch оп the steering column 6 2
3 6 2 Extremity lamps 6 3
3 6 3 lnterior lamps 6 3
3 6 4 Courtesy lamp 6 3
3 6 5 СаЬ switches 6 4
3 6 6 Exterior courtesy lamps 6 5
3 6 7 Lighting shutdown delay 6 5
3 6 8 Rotating beacon 6 6
3 6 9 Backlighting for switches in the саЬ 6 6
3 7 Dash panel 67
3 8 Steering wheel 70
3 8 1 Horn 7 0
3 8 2 Steering wheel tilt lever 7 0
Articulated Tractor
569591018
ТаЬ!е of contents
3 9 Mirrors 71
3 9 1 lnside геаг view mirror 7 1
3 9 2 Outside геаг view mirrors 7 1
3 10 Radio 72
3 11 Windows 73
3 1 1 1 Opening геаг window 7 3
3 1 1 2 Rear window as an alternate exit 7 3
3 1 1 3 Window sun screen 7 3
3 12 Storage and literature compartments 74
3 13 Operator seat 75
3 1 3 1 Armrest adjustment 7 5
3 1 3 2 Standard operator seat 7 5
3 1 3 3 Deluxe heated – vented seat 7 7
3 1 3 4 lnstructor seat 7 8
3 1 3 5 Seat belts 7 9
3 1 3 6 Operator presence functionality 7 9
3 14 Storage compartment and tool Ьох 80
3 15 Heating and air conditioning controls 81
3 15 1 Automatic temperature controls 8 1
3 15 2 Manual temperature control system 8 2
3 16 Vent locations 83
3 17 Machine management center 84
3 17 1 Terminal 84
3 17 2 Machine management center version information 85
3 17 3 Setting the measurement units 85
3 17 4 Setting the language 87
3 17 5 Setting the decimal display 88
3 17 6 Setting the time and date 88
3 17 7 Terminal settings 89
3 17 8 Applications 9 1
3 17 9 Selecting an auxiliary input 9 2
3 17 10 Viewing screens 9 3
3 17 1 1 Engine 9 3
3 17 1 2 Transmission 9 4
3 17 1 3 Hydraulic 9 5
3 17 14 Powertrain protection software ( P PS) 9 6
3 17 15 Measure INST (instantaneous) 9 7
3 17 16 Measures – field 9 7
3 17 17 Measures – fuel 9 8
3 17 18 Memory 9 8
3 17 19 Power management 10 1
3 17 20 Tractor settings 10 2
3 17 2 1 Slip alarm 10 3
3 17 2 2 ISO 1 17 8 3 Class 3 10 5
3 17 2 3 Service intervals 10 6
3 17 2 4 Headland management 1 10
3 17 2 5 Headland management icon identification 1 1 2
3 17 26 DTC (diagnostic tгоuЫе codes) stored or active 1 14
3 17 2 7 3-point linkage 1 15
3 17 2 8 Slip calibration 1 18
3 17 29 lnching pedal calibration 1 20
3 17 3 0 Radar calibration 1 2 1
3 17 3 1 EnaЫing the video camera 1 2 3
3 18 Air system operation 124
3 18 1 Air system operation 1 2 4
3 18 2 Air hose connection 1 2 4
Articulated Tractor
569591018
ТаЬ!е of contents
3 19 Machine control 125
3 19 1 Throttle control 125
3 19 2 Decelerator – if equipped 125
3 19 3 Power management 125
3 19 4 Differential lock – if equipped 126
3 19 5 Transmission control 126
3 19 6 Machine ground speeds 127
3 19 7 Transmission control lever 127
3 19 8 Transmission shifting diagram 128
3 19 9 Preselecting а gear before moving 128
3 19 1О Using of the inching clutch control 128
3 19 11 Operating the shuttle shift 129
3 19 12 Speed matching 129
3 19 13 lnching pedal control 13 0
3 19 14 Brake control 13 0
3 19 15 Service brakes 13 1
3 19 16 Hydraulic trailer brake if equipped 13 1
3 19 17 Park brake 13 2
3 19 18 Manual parking brake handle 13 2
3 20 Overweight protection strategy (OWPS) 134
3 21 Hydraulic controls 135
3 21 1 Hydraulic control valve operation 13 5
3 21 2 Roading lockout switch for the hydraulic control levers 13 6
3 22 General hydraulic connections 138
3 22 1 General hydraulic connections 13 8
3 22 2 Connecting the hoses to the quick couplers 13 8
3 22 3 Disconnecting the hoses from the quick couplers 13 9
3 22 4 Hydraulic flow management 13 9
3 22 5 Hydraulic motors 13 9
3 22 6 Selection of hydraulic motors 13 9
3 22 7 Single acting cylinders 140
3 22 8 Checking а douЫe acting cylinders 140
3 22 9 Connecting hydraulic motors to the control valves 140
3 22 1 О Connecting а grain cart with an auger motor 141
3 22 11 Semi – mounted vacuum planter with the lift assist wheels 142
3 22 12 Connecting the vacuum planter 143
3 22 13 Connecting the air seeder ог the grain drill 144
3 22 14 Connecting the spray system pump 146
3 22 15 Connecting the auxiliary implement controls 146
3 22 16 Hydraulic power beyond 147
3 22 17 Connecting а hydraulic motor to power beyond 147
3 22 18 Connecting the auxiliary implement control valve with load sensing 148
3 22 19 Connecting the auxiliary implement control valve without load sensing 148
3 22 20 Auxiliary implement control valve bank 148
3 22 21 Connecting the hydraulic motor with the flow control valve 149
3 23 Electrical system 150
3 23 1 Radar unit 150
3 23 2 Radar connector 150
3 23 3 Battery disconnect switch 151
3 23 4 Single pole connectors 151
3 23 5 Auxiliary power switch 151
3 23 6 Auxiliary power strip 152
3 23 7 Trailer connector 152
3 23 8 Routing the implement саЫе 152
3 23 9 ISO 11783 connector 153
3 24 Machine performance 154
3 25 Towing and transportation 155
Articulated Tractor
569591018
ТаЬ!е of contents
3 2 5 1 Roading the machine 15 5
3 2 5 2 Roading with а 3-point linkage mounted implement 15 6
3 2 5 3 Basic towing 15 6
3 2 5 4 Towing а stuck machine 15 7
3 2 5 5 Towing а machine with а dead engine 15 7
3 2 5 6 Discharged accumulator 15 8
3 2 5 7 Transporting the machine 159
3 26 3-point linkage 160
3 26 1 Connecting the implement to the 3-point linkage 16 0
3 26 2 Disconnecting the implement from the 3-point linkage 16 0
3 2 6 3 Connecting the implement to the quick hitch 16 0
3 26 4 Disconnecting the implement from the quick hitch 16 2
3 26 5 Console controls 16 2
3 26 6 3-point linkage 16 2
3 26 7 Adjusting the 3-point linkage control lever 16 3
3 26 8 Raise/lower switch for the 3-point linkage 16 4
3 26 9 External 3-point linkage switch 16 4
3 26 1 О Transporting the machine 16 4
3 26 1 1 lmplement leveling 16 5
3 26 1 2 Adjusting the top link 16 5
3 26 1 3 Adjusting the draft arm 16 5
3 26 14 Lift linkages and quick hitch 16 6
3 26 15 Setting the 3-point linkage side sway 16 7
3 27 Drawbar 168
3 2 7 1 Drawbar 16 8
3 2 7 2 Connecting drawbar implements 16 8
3 2 7 3 Safety chain 16 9
3 2 7 4 Adjusting the drawbar position 170
3 2 7 5 Replacing the wear plates and the rubber stops оп the standard drawbar 17 0
3 28 lmplement drive system 171
3 28 1 Operating the power take-off 17 1
3 28 2 Power take-off shaft 172
3 28 3 Connecting the power take-off implements 17 2
3 29 Ballasting 173
3 29 1 Ballasting guide lines 17 3
3 29 2 General guide lines 17 3
3 29 3 Tire pressure 17 3
3 29 4 Power hop control 17 3
3 29 5 Ballasting recommendations for the special application machine 17 4
3 29 6 Weight splits 17 4
3 29 7 Ballasting packages 17 4
3 29 8 Heavy vertical hitch loads 17 6
3 29 9 Ballasting work sheet 17 7
3 29 1 О Tire inflation guide 180
3 29 1 1 Calculating wheel slippage for machines without а speed sensor 18 2
3 29 1 2 Removing the front weights 18 3
3 29 1 3 lnstalling the front weights 185
3 29 14 Removing the wheel weights 189
3 29 14 1 2 2 7 kg ( 5 0 0 IЬ) 189
3 29 14 2 3 6 4 kg ( 80 0 lb) 19 0
3 29 15 lnstalling the wheel weights 19 1
3 29 15 1 2 2 7 kg ( 5 0 0 lb) 19 1
3 29 15 2 3 6 4 kg ( 80 0 IЬ) 19 2
3 30 Special applications 195
3 3 0 1 Special applications drawbars and hitches 19 5
3 3 0 2 Ballasting for towed scrapers 19 5
3 3 0 3 Hydraulic connections for the towed scraper 19 5
Articulated Tractor
569591018
ТаЬ!е of contents
3 3 0 4 Towed scraper general guide lines 196
3 3 0 5 Loading the scraper 196
3 3 0 6 Loading the tandem scraper 197
3 3 0 7 Hauling the scraper 197
3 3 0 8 Dumping the scraper 197
3 3 0 9 Towing а stuck scraper 197
3 31 Aftermarket equipment applications 198
3 3 1 1 Chemical tank attachment 198
4 Maintenance 199
4 1 Lubricant viscosities and refill capacities 201
4 1 1 Lubricant viscosities for ambient temperatures 201
4 1 2 Lubricant viscosities 201
4 1 3 Fill capacities 201
4 2 Service intervals 202
4 2 1 Maintenance schedule 202
4 3 Grease point locations 205
4 3 1 Drivelines grease point locations 205
4 3 2 Steering cylinders grease point locations 205
4 3 3 Upper articulation grease point location 206
4 3 4 Lower articulation pin grease point location 206
4 3 5 Extremity arm pivots grease point locations 206
4 3 6 Power take-off grease point locations 206
4 4 Main fuse panel 208
4 4 1 Fuse panel 209
4 4 2 Fuse Ыосk one 209
4 4 3 Fuse Ыосk two 21О
4 4 4 Fuse relay Ыосk one 211
4 4 5 Fuse relay Ыосk two 212
4 4 6 Main fuse 212
4 4 7 Circuit breaker 213
4 4 8 Relay and fuse panel for chassis 213
4 5 Engine 214
4 5 1 Checking the engine oil level 214
4 5 2 Changing the engine oil and oil filter 215
4 5 2 1 lnspecting used filters 216
4 5 3 Engine oil sample port 217
4 5 4 Engine belts 217
4 5 5 Replacing the engine air filter 217
4 5 6 Engine temperature 218
4 5 7 Opening the engine cover 218
4 6 Fuel system 219
4 6 1 Fuel сар 219
4 6 2 Filling the fuel system 219
4 6 3 Changing the prefilter and the fuel filters 219
4 6 4 Priming the fuel system 220
4 6 5 Draining water and sediment from the fuel tank 221
4 6 6 Fuel tank breather 222
4 6 7 Draining the fuel water separator 222
4 7 Cooling system 223
4 7 1 Cleaning the cooling cores 223
4 7 2 Water valve shutoff 223
4 7 3 Checking the engine coolant level 224
4 7 4 Coolant sample 224
4 7 5 Coolant system fluid 224
4 7 6 Cooling system additives 225
4 7 7 Draining the engine coolant 225
Articulated Tractor
569591018
ТаЬ!е of contents
4 7 8 Flushing the cooling system 226
4 7 9 Refilling the cooling system 226
4 7 1 О Replacing the water temperature thermostat 227
4 8 Power train 228
4 8 1 Checking the power train fluid level – daily 228
4 8 2 Checking the power train system fluid level – 4 00 hours 228
4 8 3 Adding power train system fluid 229
4 8 4 Draining excess power train system fluid 229
4 8 5 Changing the power train system fluid 230
4 8 6 Cleaning the breather (transmission) 234
4 9 lmplement and steering hydraulic system 235
4 9 1 Checking the implement and steering system fluid level 235
4 9 2 Changing the implement and steering system fluid 235
4 9 3 Cleaning the breather (hydraulic reservoir) 238
4 1 О Locking the articulation joint area 239
4 1 1 СаЬ filtration 24 0
4 11 1 Primary fresh air filter 24 0
4 11 2 Removing the primary air filter 24 0
4 11 3 Filter maintenance 24 0
4 11 4 Cleaning the filter 24 1
4 11 5 lnstalling the primary air filter 24 1
4 11 6 Recirculation filter 24 1
4 11 7 Removing the recirculation filter 24 2
4 11 8 lnstalling the recirculation filter 24 3
4 1 2 Battery installation and removal 24 4
4 12 1 Removing the batteries 24 4
4 12 2 lnstalling the batteries 24 6
4 1 З Wheel removal 24 9
4 13 1 Removing the outside wheel 24 9
4 13 2 Removing the center wheel 25 0
4 13 3 Removing the inside wheel 25 0
4 1 4 Wheel installation 254
4 14 1 lnstalling the inside wheel 25 4
4 14 2 lnstalling the center wheel 25 6
4 14 3 lnstalling the outside wheel 25 9
4 1 5 Wheel and counterweight re-torque 261
4 15 1 Re-torque the wheel and counterweight 26 1
4 1 6 Special tooling 262
4 16 1 Collet torque wrench extension AG332273 26 2
4 16 2 Spacer torque wrench extension AG332274 26 3
4 16 3 Single wheel bolt wrench AG332275 26 5
4 16 4 Wheel bolt 36 mm wrench AG332272 26 6
4 16 5 Wheel guide stud AG332311 26 8
4 1 7 Hub spacing 269
4 1 8 Removing the hub and collet 271
4 1 9 lnstalling the hub and collet 272
5 TrouЬleshooting 273
5 1 Heating and air conditioning trouЫeshooting 275
5 2 Electrical system trouЫeshooting 276
5 3 Brake trouЬleshooting 277
5 4 Engine trouЬleshooting 278
5 5 Hydraulic trouЫeshooting 283
5 6 3-point linkage trouЫeshooting 285
Articulated Tractor
569591018
ТаЬ!е of contents
5 7 Transmission trouЫeshooting 287
5 8 Auto-Guide trouЫeshooting 289
5 8 1 Auto-Guide ready indicator is not оп 28 9
5 8 2 Auto-Guide ready indicator is оп 29 0
5 8 3 Auto-Guide de-activates during operation 29 0
5 9 Machine Error Codes 292
5 9 1 Engine error codes 29 2
5 9 2 Transmission error codes 29 4
5 9 3 PVED error codes 29 9
5 9 4 Armrest ЕСМ error codes 300
5 9 5 Auxiliary valve one ЕСМ error codes 30 4
5 9 6 Auxiliary valve two ЕСМ error codes 30 4
5 9 7 Auxiliary valve three ЕСМ error codes 30 4
5 9 8 Auxiliary valve four ЕСМ error codes 30 5
5 9 9 Auxiliary valve five ЕСМ error codes 30 5
5 9 1 О Auxiliary valve six ЕСМ error codes 30 6
5 9 11 Front lighting ЕСМ error codes 30 6
5 9 12 Roof lighting ЕСМ error codes 30 7
5 9 13 Rear lighting ЕСМ error codes 30 7
6 Specifications 309
6 1 Engine specifications – МТ900Е 31 1
6 2 Torque specifications 31 2
6 2 1 Constant torque hose clamps 312
6 3 Machine dimensions МТ900Е 31 3
6 4 Noise vibration level 31 6
6 5 Machine specifications 31 7
6 5 1 Machine specifications МТ9 00 Е 317
6 5 2 Shipping weights МТ9 00 Е 319
6 6 Special tools 321
6 6 1 Collet torque wrench extension AG332273 321
6 6 2 Spacer torque wrench extension AG332274 322
6 6 3 Single wheel bolt wrench AG332275 324
6 6 4 Wheel bolt 36 mm wrench AG332272 325
6 6 5 Wheel guide stud AG332311 327
7 lndex 329
VIDEO PREVIEW OF THE MANUAL:
PLEASE NOTE:
- This is the SAME exact manual used by your dealers to fix your vehicle.
- The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
- Any queries / doubts regarding your purchase, please feel free to contact [email protected]
S.V