Challenger МТ500E Series MT 555E MT 565E MT 575E MT 585E MT 595E Classic Version AutoPower VI Operator’s Manual – PDF DOWNLOAD
IMAGES PREVIEW OF THE MANUAL:
DESCRIPTION:
Challenger МТ500E Series MT 555E MT 565E MT 575E MT 585E MT 595E Classic Version AutoPower VI Operator’s Manual – PDF DOWNLOAD
Operator’s Manual :
- The purpose of this manual is to еnаЫе the owner and the operator to operate the tractor appropriately under normal conditions of use. Providing they follow the instructions carefully, the tractor will give many years of service in the Challenger tradition. Use for any other activity (particularly forestry work) is considered to Ье contrary to the intended use. The commissioning of equipment Ьу the Challenger dealer оп the user’s premises enaЫes the dealer to ensure that these operating and service instructions are properly understood.
- Always consult the Challenger dealer if there is any part of this manual that you do not understand. lt is important that these instructions are understood and followed. This manual does not cover all operation and safety instructions relevant to the implements and accessories that may Ье fitted at the time of tractor delivery or later. lt is essential that operators use and understand the Operator’s Manuals relating to these implements and accessories.
IMPORTANT:
- This manual must always Ье kept with the tractor. For extra copies, contact your Challenger dealer. This chapter in the Operator’s Manual highlights certain basic safety-related situations that may Ье encountered during normal operation and servicing of the tractor and provides the information needed to handle these situations. This chapter supplements any safety instructions given in other chapters of this manual.
- lt may Ье necessary to take additional precautions, depending оп the implements and accessories used and the working conditions on-site or in the service area. Challenger сап under по circumstances exercise direct control over the commissioning, operation, inspection, lubrication or servicing of the tractor. lt is therefore YOUR responsibility to take suitaЫe safety precautions in such areas.
TABLE OF CONTENTS:
Challenger МТ500E Series MT 555E MT 565E MT 575E MT 585E MT 595E Classic Version AutoPower VI Operator’s Manual – PDF DOWNLOAD
1 Tractor identification 9
1 1 Locating serial numbers 11
1 1 1 Locating serial numbers 1 1
1 2 Your tractor identification details 12
1 2 1 Your tractor identification details 1 2
2 Safety instructions and safety points – Warranty 13
2 1 lntroduction 15
2 1 1 lntroduction – Safety instructions 1 5
2 2 Safety – Symbols and terms 17
2 2 1 Safety – Symbols and terms 1 7
2 3 Safety decals and instructions 18
2 3 1 Checking and replacing the safety decals and instructions 1 8
2 3 2 Presentation and location of the safety decals and instructions 1 9
2 4 General safety instructions 24
2 4 1 Awareness of the safety instructions and symbols 2 4
2 4 2 Operator familiarity in the use of the tractor 2 4
2 4 3 Filling the fuel tank 2 5
2 4 4 Mounting and dismounting the operator’s seat 2 5
2 4 5 Mandatory procedure before dismounting the tractor 2 6
2 5 Special safety instructions for preparing the tractor for use 27
2 5 1 Protective clothing 2 7
2 5 2 Activated carbon filter information 2 7
2 5 3 Safety devices and items 30
2 5 4 Checking the tractor 30
2 6 Specific safety instructions for starting the tractor 32
2 6 1 Protection of persons other than the operator 32
2 6 2 Start up safely 32
2 6 3 Starting the tractor with jump start саЫеs 33
2 6 4 Checks to Ье carried out after start-up 34
2 7 Specific safety instructions for using the tractor 35
2 7 1 General instructions 35
2 7 2 Protection of persons other than the operator 36
2 7 3 Overturning 36
2 7 4 Tractor towing 39
2 7 5 Regulatory data on maximum permitted trailed weights 39
2 7 6 Road use 4 1
2 7 7 Parking brake 4 3
2 7 8 Power take-off 4 3
2 7 9 lmplements 4 4
2 7 1 О Front-end loader 4 6
2 8 Specific safety instructions for servicing the tractor 47
2 8 1 Pollution warning to observe when servicing the tractor 4 7
2 8 2 General instructions 4 7
2 8 3 Handling instructions 4 8
2 8 4 Special instructions for cleaning the tractor 5 0
2 9 Protective structures 51
2 9 1 Protective structures – Use and accreditation 5 1
2 9 2 СаЬ 5 1
2 9 3 Seat belt 5 1
Operation – МТ500Е
ACT0008848_ed3
ТаЬ/е of contents
2 9 4 lnstructor seat 52
2 10 Warranty 53
2 10 1 General 53
2 10 2 Pre-delivery inspection and commissioning оп the user’s premises 53
2 10 3 Warranty ргосеduге 53
2 10 4 Ргосеduге to follow if changing region 53
2 10 5 Servicing during and after the wаггапtу period 54
2 10 6 California emission control wаггапtу statement 54
2 10 7 Emission reduction wаггапtу statement fог the United States and Canada 57
3 Usage 63
3 1 Operator environment 67
3 1 1 Steering console 67
3 1 2 lnstrument panel 68
3 1 3 Control unit 74
3 1 4 Pedals 75
3 1 5 Steering wheel 75
3 1 6 Орегаtог presence detector 76
3 1 7 Automatic adjustment pneumatic seat 79
3 1 8 Manual adjustment pneumatic seat 85
3 1 9 lnstructor seat 90
3 1 1О Long right-hand console 90
3 1 11 Right-hand pillar 91
3 1 12 Left-hand console 92
3 1 13 Uррег console 93
3 1 14 Manual аiг conditioning 94
3 1 15 Additional heater 98
3 1 16 Accessories sockets 99
3 1 17 Emergency exits 99
3 1 18 Sun visor 10 0
3 1 19 Wheel chock(s) (optional) 10 0
3 2 Setup and lnformation Screen control screens on the instrument
panel 102
3 2 1 Using the Setup and lnformation Sсгееп 10 2
3 2 2 Setup and lnformation screens 10 4
3 3 Body 111
3 3 1 Opening the bonnet 111
3 3 2 Adjusting the external rear-view miггогs 111
3 3 2 1 Positioning the arms 111
3 3 2 2 Adjusting the агm extensions (depending оп model) 112
3 3 2 3 Rear-view miггог with manual adjustment 112
3 3 3 Adjusting the left-hand step 112
3 4 Engine 114
3 4 1 Running-in 114
3 4 2 Filling with fuel 114
3 4 3 Start switch 116
3 4 4 Start-up 116
3 4 5 Starting the SCR Technology engine in cold weather 117
3 4 6 lnformation about the various operating modes of the SCR Technology engine 119
3 4 7 Stopping the engine 12 4
3 4 8 Engine speed 12 4
3 4 9 Storing ап engine speed 12 6
3 5 Transmission 128
3 5 1 Presentation of the different driving modes 12 8
3 5 2 Clutch function 12 8
3 5 3 PowerShuttle 12 9
3 5 3 1 PowerShuttle Protection Function 13 0
Operation – МТ500Е
ACT0008848_ed3
ТаЬ/е of contents
3 5 4 Adjusting the start ratios (1А , 1В , 1С etc ) 13 1
3 5 4 1 Setting procedure: 13 1
3 5 4 2 Starting ratio 13 1
3 5 5 Lever ( Speedmatching) mode 13 2
3 5 6 Pedal ( AutoDrive) mode 13 3
3 5 7 Road mode ( Hare)/Field mode ( Tortoise) 13 4
3 5 8 Changing the transmission ratios (1А , 1В , 1С , etc ) 13 5
3 5 9 Optional сгеерег range (snail) 13 5
3 5 1О Tractor towing 13 6
3 5 11 Forward speed calibration 13 6
3 6 Brakes 138
3 6 1 Brake pedals 13 8
3 6 2 Hydraulic trailer brake 13 8
3 6 3 Pneumatic trailer brake 13 9
3 6 4 Parking brake 14 0
3 7 Front axle 142
3 7 1 Four-wheel drive front axle 14 2
3 7 2 Suspended front axle 14 3
3 7 3 PermissiЫe load оп the front axle 14 5
3 8 Differential lock 148
3 8 1 Differential lock 14 8
3 9 Power take-off 150
3 9 1 Front power take-off 15 0
3 9 2 Rear power take-off ( РТО) 150
3 9 2 1 Selecting the power take-off speed 151
3 9 2 2 Adjusting the progressivity of power-take-off engagement 15 2
3 9 2 3 Engaging РТО in manual mode: 15 3
3 9 2 4 Engaging РТО in automatic mode: 15 3
3 9 3 Economy РТО 15 4
3 9 4 Changing the flanged shaft 15 5
3 9 5 РТО external control 15 6
3 9 6 Power take-off electronic controls 15 7
3 9 7 Power take-off protection 15 7
3 1 О Linkage 159
3 10 1 General 159
3 10 2 Rear linkage electronic controls 16 0
3 10 3 Rear linkage operation 16 0
3 10 4 Rear linkage external controls 16 6
3 10 5 Front linkage 16 6
3 10 6 Тор link 17 0
3 10 7 Bottom links 17 2
3 10 8 Lift rods 17 3
3 10 9 Stabilizers 17 4
3 10 9 1 Stabilizers with manual telescopic adjustment 17 5
3 10 9 2 Stabilizers with shoes 17 6
3 10 1О Ball joint support 17 6
3 11 Towing equipment 177
3 11 1 General 17 7
3 11 2 Swinging drawbar 17 8
3 11 2 1 S AE standard 17 8
3 11 2 2 Fitting the swinging drawbar 18 1
3 11 2 3 Hitching ап attachment 18 2
3 11 2 4 Modifying the clevis оп the category 3 Ьаг 18 2
3 11 3 Three-point linkage: Ouick linkage hitch 18 2
3 11 3 1 Fitting 18 3
3 11 3 2 Transformation to category 3N 18 4
3 12 Auxiliary hydraulics 185
Operation – МТ500Е
ACT0008848_ed3
ТаЬ/е of contents
3 12 1 General 18 5
3 12 2 Description of hydгaulic couplers on Closed Center system (Load Sensing) 18 5
3 12 3 Use of hydгaulic couplers on Closed Center system (Load Sensing) 18 7
3 12 4 Description of the hydгaulic controls inside the са Ь 19 1
3 12 5 Hydraulics control lever 19 2
3 12 6 Setting flow rates 19 3
3 13 Standard front-end loader function 194
3 13 1 Front-end loader 19 4
3 13 2 Layout of components 19 4
3 13 3 Standard front-end loader connection 19 5
3 13 4 Using the mechanical joystick of the front-end loader 19 6
3 13 4 1 Locking/unlocking the front-end loader control 19 6
3 13 4 2 Joystick in working position 19 6
3 13 4 3 Joystick in rest position 19 7
3 13 4 4 Joystick functions fог the front-end loader 19 7
3 13 4 5 Electrical functions fог the front-end loader 19 7
3 13 4 6 Floating position 19 8
3 13 4 7 3rd and 4th functions 19 8
3 13 4 8 Агm suspension 19 9
3 13 4 9 Locking and unlocking accessories 19 9
3 14 Lighting 200
3 14 1 Main lighting control module 2 0 0
3 14 2 Work lights module 2 0 1
3 14 3 Direction indicators 2 0 2
3 15 Suspended саЬ 206
3 15 1 Suspended са Ь 2 0 6
3 16 Front tires and track widths 209
3 16 1 Wheel studs 2 0 9
3 16 2 lnstallation points of the axle stands 2 0 9
3 16 3 Adjusting the front wheel track width 21О
3 16 4 Adjusting the 4WD front axle stops 2 13
3 16 4 1 Fitting the oscillation stops 2 13
3 16 4 2 Adjusting the steering angle 2 13
3 16 4 3 Toe-in check 2 14
3 16 4 4 Adjusting the front fenders Adjusting the lateral position of the fender
on the support (two adjustments аге possiЫe) 2 14
3 16 5 Tires 2 15
3 16 6 Тiге pressures 2 15
3 17 Rear tires and track widths 2 16
3 17 1 Wheel studs 2 16
3 17 2 lnstallation points of the axle stands 216
3 17 3 Rеаг track width with flanged shafts 217
3 17 4 Rеаг track width with short straight shafts 219
3 17 5 Rеаг track width with long straight shafts 223
3 17 6 Adjusting the геаг wheel track width 228
3 17 6 1 Adjustment of wheel position on the straight shaft 228
3 17 6 2 Adjustment of wheel position on the straight shaft 229
3 18 Dual wheels 2зо
3 18 1 Dual wheels 2 3 0
3 18 2 lnstallation points of the axle stands 2 3 1
3 18 3 Dual геаг wheel track width with short straight shafts 2 3 2
3 18 4 Dual геаг wheel track width with long straight shafts 24 1
3 19 Ballast 256
3 19 1 Liquid ballasting 2 5 6
3 19 2 Front-end weight 2 5 6
VIDEO PREVIEW OF THE MANUAL:
PLEASE NOTE:
- This is the SAME manual used by the dealers to troubleshoot any faults in your vehicle. This can be yours in 2 minutes after the payment is made.
- Contact us at [email protected] should you have any queries before your purchase or that you need any other service / repair / parts operators manual.
S.V