Cat SU488 L & SU488 Scoop Operation & Maintenance Manual BI001639 – PDF DOWNLOAD
FILE DETAILS:
Cat SU488 L & SU488 Scoop Operation & Maintenance Manual BI001639 – PDF DOWNLOAD
Language : English
Pages :152
Downloadable : Yes
File Type : PDF
DESCRIPTION:
Cat SU488 L & SU488 Scoop Operation & Maintenance Manual BI001639 – PDF DOWNLOAD
This chapter provides important information making it easier for you to use this manual. You will
also be given information on the structure of the manual and the symbols and characters used.
equipment or machine used.
This operating manual is intended for:
Model SU488 L Scoop Serial No.: N/A
- The operating manual must be accessible at all times to all persons working on or with the machine.
It should, if possible, always be avail- able at the place of operation. - Send for a new operation manual immediately if the present manual is no longer complete or has
become illegible.
This operating manual is intended for those persons who work with or on the machine.
Every person working on the face or in the intersection between face and entry or in the entry must
read this operating manual.
■ are in charge of transport
■ perform assembly / disassembly work
■ operate the machine
■ eliminate faults
■ perform daily routine work on the face or in the entry
■ perform maintenance work
■ perform repair work
IMAGES PREVIEW OF THE MANUAL:
TABLE OF CONTENTS:
Cat SU488 L & SU488 Scoop Operation & Maintenance Manual BI001639 – PDF DOWNLOAD
1 About this manual
About this manual 1 3
Before starting to work 1 3
Who is this operating manual intended for? 1 3
What is the purpose of this operating manual? 1 4
Characters and symbols 1 5
2 Your safety
Your safety 2 3
Personnel 2 4
Operation 2 4
Installation and repair 2 4
Operating conditions 2 5
Intended use 2 5
Unauthorized use 2 5
Safety instructions 2 7
General rules: 2 7
Storage and transport 2 8
Pre-start inspection 2 8
Installation and start-up 2 9
Operation 2 9
Stopping 2 10
Maintenance and repair 2 10
3 Storage and transport
Storage and transport 3 3
Storage 3 3
Storage of the machine and spare parts 3 3
Transport 3 4
Load units, dimensions, and weights 3 4
Before transport 3 5
4 Installation
Installation 4 3
Points to observe prior to installation 4 3
Who is allowed to carry out installation? 4 3
Which tools are required for installation? 4 3
Notes on installation 4 4
Pre-installation check list 4 5
Safety features 4 6
5 Operation
Operation 5 3
How to operate the machine 5 3
Who is allowed to operate the machine 5 3
When can operation be started? 5 3
Controls and indicators 5 4
Operator’s compartment – common 5 6
Hydraulic control panel (standard) 5 9
Hydraulic control panel (with vertical lift and QDS) 5 11
Operator’s compartment with control handle 5 15
Operator’s compartment with control station 5 18
Hazard zone 5 20
Starting procedure with control handle 5 21
Machine operation with control handle 5 22
Shutdown procedure with control handle 5 25
Starting procedure with control station 5 27
Shutdown procedure with control station 5 30
Towing a disabled machine 5 31
Battery change procedure (ground level) 5 32
Battery change procedure (vertical lift) 5 38
Instructions on the maintenance 5 45
Important notes 5 45
Before maintenance 5 45
Critical torque values 5 46
Lubricants, fluids and capacities 5 46
Specific lubrication and maintenance instructions 5 51
Every shift 5 51
Weekly 5 52
Monthly 5 53
Every three months 5 64
Major maintenance 5 71
Drive motor/gearbox removal and replacement 5 71
Tire/wheel installation procedure 5 73
Troubleshooting procedures 5 77
Hydraulic system (general) 5 78
Brakes 5 81
Hydraulic cylinders 5 83
Hydraulic pump 5 84
Valves 5 86
6 Technical data
Technical data 6 3
Tightening torques 6 5
Permissible data 6 11
Lubrication fluids and greases 6 11
VIDEO PREVIEW OF THE MANUAL:
S.M