Case IH Tractor Maxxum 110,120,130,115,125,140 EP Operator’s Manual – PDF DOWNLOAD

Case IH Tractor Maxxum 110,120,130,115,125,140 EP Operator’s Manual

FILE DETAILS:

VIDEO PREVIEW OF THE MANUAL:

IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:

GENERAL INFORMATION:

• This Manual has been prepared to assist you in the correct procedure for running- in, driving and operating and for the maintenance of your new tractor. Read this Manual carefully. Your tractor is intended for use in normal and customary agricultural applications.
• If at any time you require advice concerning your tractor, do not hesitate to contact your authorised dealer. He has factory trained personnel, genuine manufacturers’ parts and the necessary equipment to carry out all your service requirements. The specification are provided for your information and guidance.
• For further information concerning your tractor and equipment, consult your authorised dealer. All data given in this manual is subject to production variations. Dimensions and weight are approximate only. The illustrations do not necessarily show tractors in standard condition or imply that these features are available in all countries.
• For exact information about any particular tractor, please consult your authorised dealer. Your tractor has been designed and built to give maximum performance, economy and ease of operation under a wide variety of operating conditions.
• Prior to delivery, the tractor was carefully inspected, both at the factory and by your dealer to ensure that it reaches you in optimum condition. To maintain this condition and ensure troublefree operation, it is important that the routine services, as specified on page 7-12 of this Manual, are carried out at the recommended intervals.

OPERATORS MANUAL STORAGE:

• The Operators Manual supplied with your tractor is an important source of information and should be stored safely. The manual is written specifically for your tractor so it is important that you make a note of the print number and issue date which can be found on the cover.
• In the event the manual is lost or damaged it can be replaced with the correct version. A storage pocket for the Operators Manual can be found on the rear of the seat. The manual should be kept in this pocket at all times when not in use.

ABOUT THIS MANUAL:

• This manual gives information for use of your machine, as intended and under the conditions foreseen by the manufacturer during normal operation and routine service and maintenance. Read and understand; keep it in good condition and always safely store it in the provided pocket in the back of your seat for later easy retrieval.
• This manual does not contain all the information related to periodical service, converting and repairs to be carried out by professional service personnel. The Table of Contents page(s) are provided to have an overview of main manual’s topics. A detailed alphabetic index is available at the end of this manual for locating specific items.

Normal operation:

• Normal operation means the use of the tractor for the purpose intended by the manufacturer by an operator familiar with the tractor and the mounted or towed equipment and complying with the information for operation and safe practices, as specified by the manufacturer in this manual and by the decals on the tractor and the equipment.
•  Normal operation includes the preparation and storage of the tractor, swinging components into work position and vice versa, adding or removing ballast and picking up and setting off attachments.
•  Normal operation includes the adjustment and setting of the tractor and equipment, for the specific condition of the field and/ or the crop.

Routine service

Routine service and maintenance means activities that must be done daily by an operator familiar with the tractor characteristics and complying with the information for routine service and safe practices, as specified by the manufacturer in this manual and by decals on the tractor, in order to maintain its proper function. Routine service includes activities such as fueling, cleaning, washing, topping up fluid levels, greasing, replacing of consumable articles such as lamp bulbs.

Converting, periodical service and repair:

•  Periodical service means activities that must be done at defined intervals by trained personnel familiar with the tractor characteristics and which are complying with the information for periodical service and safe practices, as partly specified by the manufacturer in this manual and in other Company literature, in order to maintain the expected life time of the tractor.
•  Converting means activities that must be done by professional service personnel familiar with the tractor characteristics and complying with the information for converting, as partly specified by the manufacturer in this manual, in assembly instructions or in other Company literature, in order to fit the tractor to a specific configuration.

CLEANING THE TRACTOR:

• Your tractor is a state- of- the- art machine with sophisticated, electronic controls. This should be taken into consideration when cleaning the tractor, particularly if using a high pressure washer. Even though every precaution has been taken to safeguard electronic components and connections, the pressure generated by some of these machines is such that complete protection against water ingress cannot be guaranteed.
• When using a high pressure washer, do not stand too close to the tractor and avoid directing the jet at electronic components, electrical connections, breathers, seals, filler caps, etc. Never direct a cold water jet at a hot engine or exhaust. Failure to comply with these rules will render the warranty null and void.

SAFETY:

The pages in Section 2 list the precautions to be observed to ensure your safety and the safety of others. Read the safety precautions and follow the advice offered before operating the tractor.

TABLE OF CONTENTS:

Case IH Tractor Maxxum 110,120,130,115,125,140 EP Operator’s Manual_84484476

1 GENERAL INFORMATION
CE DECLARATION OF CONFORMITY 1-1
METRIC AND IMPERIAL UNITS ABBREVIATIONS 1-3
TO THE OWNER 1-5
PRODUCT IDENTIFICATION1-7
ENGINE IDENTIFICATION 1-8
DRIVELINE IDENTIFICATION 1-9
CAB IDENTIFICATION 1-9
PRODUCT IDENTIFICATION PLATE 1-9
ECOLOGY AND THE ENVIRONMENT 1-10
NOISE LEVEL INFORMATION SHEET 1-11
PROGRAMMING TRACTOR FUNCTIONS1-11
BEFORE OPERATING THE TRACTOR1-12
INTERNATIONAL SYMBOLS 1-13
VIBRATION LEVEL INFORMATION SHEET 1-14
MACHINE STABILITY 1-15
INSTRUCTOR’S SEAT1-19
SELECTIVE CATALYTIC REDUCTION (SCR) SYSTEM 1-20
2 SAFETY INFORMATION
SAFETY PRECAUTIONS 2-1
BEFORE DRIVING THE TRACTOR 2-2
DRIVING THE TRACTOR 2-3
OPERATING THE TRACTOR2-4
OPERATING THE PTO 2-6
OPERATING THE EXTERNAL CONTROLS 2-6
SERVICING THE TRACTOR2-7
DIESEL FUEL 2-9
PREVENTION OF FIRE OR EXPLOSION 2-10
FIRE EXTINGUISHER2-11
PROTECTION OFFERED BY THE TRACTOR 2-12
INTENDED USE STATEMENT 2-15
SAFETY ASPECTS2-17
SAFETY DECALS 2-24
3 CONTROLS/INSTRUMENTS
ACCESS TO OPERATOR’S PLATFORM
INTRODUCTION3-1
CAB AIR FILTERS 3-5
IN CAB STORAGE (where fitted) 3-6
CABLE AND WIRING ROUTING 3-7
MOBILE TELEPHONE USAGE3-7
IMPLEMENT MONITOR INSTALLATION 3-8
CAB AIR PRESSURISATION MONITOR (where fitted) 3-8
OPERATOR’S SEAT
AIR SUSPENSION SEAT DELUXE 3-10
SEAT BELT 3-15
INSTRUCTOR’S SEAT
INSTRUCTIONAL SEAT (where fitted)3-16
FORWARD CONTROLS
KEY- START SWITCH 3-17
HAZARD WARNING LIGHT SWITCH 3-17
LIGHT-/ TURN LEVER 3-18
FOLLOW ME HOME LIGHTS 3-18
WINDSHIELD WIPER AND WASHER CONTROLS 3-19
CLUTCH/ INCHING PEDAL 3-20
FOOT THROTTLE PEDAL 3-20
HAND THROTTLE3-21
FOOT BRAKES3-22
STEERING COLUMN3-23
LEFT-HAND SIDE CONTROLS
HANDBRAKE 3-24
RIGHT-HAND SIDE CONTROLS
INTEGRATED CONTROL PANEL 3-25
REARWARD CONTROLS
SWITCHES ON C-PILLAR 3-26
HYDRAULIC MASTER SWITCH 3-28
FAST STEERING SYSTEM (where fitted)3-29
BATTERY ISOLATOR SWITCH 3-31
CLIMATE CONTROLS 3-32
MANUAL TEMPERATURE CONTROL3-33
AUTOMATIC TEMPERATURE CONTROL (ATC) 3-34
OVERHEAD CONTROLS
SWITCH PANEL WORKLIGHTS 3-36
RADIO (where fitted) 3-36
INTERIOR LIGHT 3-38
INSTRUMENT CLUSTER
INTEGRATED CONTROL UNIT 3-39
GAUGES 3-39
INDICATOR AND WARNING LIGHTS 3-40
DISPLAYS3-43
TRANSMISSION DISPLAY3-44
KEYPAD BASIC3-46
KEYPAD ENHANCED3-47
SELECTING OR CHANGING THE DISPLAY SETTINGS 3-49
ADJUST MENU3-50
CONFIGURE MENU 3-52
PERFORMANCE MONITOR 3-55
ARMREST COLOUR DISPLAY 3-60
POP- UP SCREENS ON COLOUR DISPLAY 3-62
PERFORMANCE MONITOR ON COLOUR DISPLAY3-68
PROGRAMMING THE DISPLAYS 3-71
ALARM FUNCTIONS3-74
ACCESSING STORED ERROR CODES 3-76
WARNING AND ADVISORY SYMBOLS 3-77
4 OPERATING INSTRUCTIONS
COMMISSIONING THE UNIT
TRACTOR REFUELLING4-1
STARTING THE UNIT
STARTING THE ENGINE4-3
GRID HEATER COLD START AID (where fitted)4-5
FUEL HEATER (where fitted) 4-5
COOLANT IMMERSION HEATER (where fitted)4-6
TRANSMISSION OIL HEATER (where fitted) 4-6
BOOSTING THE BATTERY 4-7
STOPPING THE UNIT
STOPPING THE ENGINE4-8
AUTOMATIC ENGINE SHUTDOWN 4-8
AUTOMATIC ENGINE SHUTDOWN WITH ENHANCED KEYPAD (where fitted)4-9
MOVING THE UNIT
OPERATING IN COLD TEMPERATURES4-10
LOW IDLE SPEED MANAGEMENT4-11
5 TRANSPORT OPERATIONS
PREPARING FOR ROAD TRANSPORT
CARRYING THE TRACTOR ON A TRANSPORTER 5-1
SECURE THE HIGH VISIBILITY ROOF PANEL 5-1
RECOVERY TRANSPORT
TOWING THE TRACTOR5-2
6 WORKING OPERATIONS
GENERAL INFORMATION
VARIABLE ENGINE POWER MANAGEMENT 6-1
CONSTANT ENGINE SPEED 6-3
DIFFERENTIAL LOCK6-6
FOUR WHEEL DRIVE6-8
FRONT AXLE SUSPENSION (where fitted) 6-10
AUTOMATED HEADLAND FUNCTIONS6-11
QUICK GUIDE 6-11
EXPLANATION OF SYMBOLS 6-13
RECORDING AND RE-PLAYING6-14
RECORDING A SEQUENCE 6-17
RE-PLAYING A SEQUENCE 6-19
HEADLAND FUNCTION AND COLOUR DISPLAY SCREENS6-23
DELETING A SEQUENCE WITH COLOUR DISPLAY 6-26
TRANSMISSION
SHUTTLE LEVER6-27
SEMI POWERSHIFT TRANSMISSION 6-29
TRANSMISSION OPERATION 6-29
TRANSMISSION DISPLAY 6-31
POWERSHIFT CONTROL6-33
SHUTTLE MODE6-35
DRIVING THE TRACTOR 6-37
AUTO TAKE OFF6-40
SPEED MATCHING 6-41
AUTO SHIFT FUNCTION 6-42
AUTO SHIFTING IN FIELD MODE6-42
AUTO SHIFTING IN ROAD MODE6-46
CREEPER GEARS (where fitted) 6-48
ERROR CODES 6-49
REAR POWER TAKE-OFF
PTO OPERATING PRECAUTIONS 6-50
CHANGING THE PTO OUTPUT SHAFT 6-50
ATTACHING PTO DRIVEN EQUIPMENT 6-51
PTO OPERATION 6-52
THREE-SPEED PTO SYSTEM6-57
GROUND DRIVE PTO (where fitted)6-58
EXTERNAL PTO CONTROLS 6-59
AUTO PTO OPERATION6-61
FRONT POWER TAKE OFF
PTO OPERATION 6-64
REAR HITCH
ELECTRONIC DRAFT CONTROL 6-66
SETTINGS AND DISPLAY6-70
ELECTRONIC DRAFT CONTROL OPERATION 6-72
EXTERNAL HITCH CONTROLS6-78
FRONT HITCH
SETTINGS AND ADJUSTMENTS 6-80
HITCH OPERATION6-83
AUXILIARY FRONT COUPLERS (where fitted) 6-88
EXTERNAL HITCH CONTROLS6-90
FRONT HITCH MANAGEMENT6-91
ELECTRO-HYDRAULIC REMOTE CONTROL VALVES (where fitted)
REMOTE CONTROL VALVES 6-96
SETTINGS AND ADJUSTMENTS6-103
SETTING THE REMOTE VALVE PRIORITY 6-109
CREATING TIMER PROGRAMMES 6-111
CONNECTING REMOTE CYLINDERS 6-118
OPERATING WITH REMOTE VALVES 6-120
JOYSTICK OPERATION WITH A FRONT LOADER 6-122
MID MOUNT REMOTE VALVES 6-124
EXTERNAL EHR CONTROLS 6-126
HYDRAULIC OIL LEVEL WHEN USING REMOTE HYDRAULIC EQUIPMENT 6-127
HYDRAULIC POWER BEYOND PORT
HYDRAULIC POWER BEYOND FOR EXTERNAL SERVICES6-129
THREE POINT HITCH
ATTACHING THREE-POINT HITCH EQUIPMENT 6-132
LIFT ROD ADJUSTMENT 6-134
TOP LINK ADJUSTMENT6-136
FLEXIBLE LINK END ADJUSTMENT 6-137
QUICK HITCH6-138
LINKAGE STABILISER ADJUSTMENT 6-140
DRAWBARS AND TOWING ATTACHMENTS
DRAWBARS AND TOWING ATTACHMENTS6-143
SWINGING DRAWBARS6-146
AUTOMATIC PICK-UP HITCH 6-149
REAR TOW HITCH6-151
TRAILER BRAKING SYSTEMS
AIR-OPERATED TRAILER BRAKES6-157
AIR-OPERATED TRAILER BRAKES (Italy only)6-160
TRAILER BRAKE BIAS CONTROL 6-161
AUXILIARY AIR SUPPLY CONNECTOR (where fitted) 6-161
HYDRAULIC TRAILER BRAKES 6-162
HYDRAULIC TRAILER BRAKES (Italy only) 6-163
WHEEL TRACK ADJUSTMENT
FRONT WHEEL TRACK ADJUSTMENT 6-164
FRONT WHEEL ALIGNMENT 6-167
STEERING STOPS6-168
FRONT AXLE OSCILLATION STOPS 6-168
FRONT FENDER 6-169
REAR WHEEL TRACK ADJUSTMENT6-171
FLANGE TYPE AXLE (where fitted) 6-171
BAR TYPE AXLE (where fitted)6-175
BALLASTING AND TYRES
BALLASTING AND TYRES 6-179
IRON WEIGHTS (where fitted) 6-182
LIQUID BALLAST 6-185
TYRE INFLATION 6-187
TYRE PRESSURES AND PERMISSIBLE LOADS 6-188
AUXILIARY POWER CONNECTIONS
DIAGNOSTIC SOCKET 6-190
TRAILER SOCKET ELECTRICAL6-190
ELECTRICAL POWER CONNECTORS 6-191
INTERNAL POWER CONNECTORS6-191
EXTERNAL POWER CONNECTORS 6-193
7 MAINTENANCE
GENERAL INFORMATION
INTRODUCTION7-1
FUEL REQUIREMENT7-2
BIODIESEL FUEL 7-4
ENGINE OIL CHANGE7-5
PROTECTIVE DEVICES 7-6
LUBRICANTS AND COOLANTS 7-8
TRACTOR JACKING POINTS7-10
GENERAL SPECIFICATIONS7-10
CAPACITIES7-11
MAINTENANCE CHART
Maintenance Chart7-12
WHEN THE WARNING LAMP LIGHTS
CHANGE ENGINE AIR CLEANER OUTHER ELEMENT7-14
DRAIN FUEL SYSTEM WATER SEPARATOR 7-15
CHECK BRAKE FLUID LEVEL 7-16
EVERY 10 HOURS OR EACH DAY
CHECK ENGINE COOLANT LEVEL7-17
CHECK ENGINE OIL LEVEL 7-18
CHECK REMOTE CONTROL VALVE DRAIN BOTTLES7-18
CHECK WINDSCREEN WASHER RESERVOIR 7-19
DRAIN AIR RESERVOIR ON AIR OPERATED TRAILER BRAKE 7-19
FIRST 50 HOURS
SERVICE OPERATIONS7-20
EVERY 50 HOURS
CLEAN CAB AIR FILTER 7-21
CLEAN COOLER SECTION 7-23
ALL GREASE FITTINGS7-24
CHECK FRONT AND REAR WHEEL NUTS7-29
CHECK TYRE PRESSURES AND TYRE CONDITION 7-29
EVERY 100 HOURS
INSPECT POLY V-BELT7-30
INSPECT COMPRESSOR DRIVE BELT 7-30
EVERY 300 HOURS
CHECK BATTERY FLUID LEVEL7-32
ADJUST HANDBRAKE 7-34
CHECK TRANSMISSION/REAR AXLE AND HYDRAULIC OIL LEVEL7-34
CHECK 4WD FRONT AXLE DIFFERENTIAL AND HUBS OIL LEVEL 7-35
CHECK FRONT PTO GEARBOX OIL LEVEL 7-35
EVERY 600 HOURS
CHANGE ENGINE OIL AND FILTER 7-36
CHANGE FUEL PRE-FILTER AND FUEL FILTER ELEMENT7-38
CHANGE ENGINE AIR CLEANER OUTHER ELEMENT7-39
CHANGE CHARGE PUMP OIL FILTER 7-40
CHECK ENGINE AIR INTAKE CONNECTIONS7-41
CHECK TRANSMISSION OIL COOLER PIPE COUPLINGS 7-42
CLEAN DEF/ AdBlue INLINE FILTER 7-42
EVERY 1200 HOURS OR ANNUALLY
CHANGE CAB AIR FILTERS 7-43
CHANGE MAIN OIL FILTER CARTRIDGE 7-44
CHANGE TRANSMISSION/ REAR AXLE AND HYDRAULIC OIL 7-45
CHANGE 4WD DIFFERENTIAL OIL7-46
CHANGE 4WD PLANETARY HUB OIL7-47
CHANGE FRONT PTO GEARBOX OIL 7-47
GREASE REAR AXLE SHAFT BEARING7-48
EVERY 1200 HOURS OR EVERY 2 YEARS
CHECK BATTERY FLUID LEVEL7-49
CHANGE ENGINE AIR CLEANER INNER ELEMENT 7-51
CHANGE ENGINE BREATHER FILTER 7-52
CHECK VALVE TAPPET CLEARANCE7-52
CHANGE DEF/ AdBlue INLINE FILTER 7-52
CHANGE ENGINE COOLANT FLUID 7-53
CHANGE AIR BRAKE DRIER RESERVOIR 7-57
CHANGE POLY V-BELTS 7-58
EVERY 3600 HOURS OR EVERY 2 YEARS
CHANGE DEF/ AdBlue MAIN FILTER 7-60
EVERY 36 MONTHS
SERVICE AIR CONDITIONER SYSTEM 7-61
CHECK BATTERY FLUID LEVEL7-62
GENERAL MAINTENANCE
CLEANING THE TRACTOR 7-64
FUEL SYSTEM PRE- FILTER AND WATER TRAP7-66
BLEEDING FUEL INJECTION SYSTEM 7-66
CHECK BRAKE PEDAL LATCHING/UNLATCHING 7-67
ADJUST CAB SUSPENSION (where fitted) 7-68
ADJUST AUTOMATICK PICK- UP HITCH7-69
HEADLIGHT AND WORKLAMP ADJUSTMENT 7-70
BULB REPLACEMENT 7-71
FUSES AND RELAYS7-75
PROTECTING ELECTRONIC AND ELECTRICAL SYSTEMS DURING BATTERY
CHARGING OR WELDING7-80
BATTERY REMOVAL AND INSTALLATION 7-81
STORAGE
TRACTOR STORAGE 7-83
PREPARATION FOR USE AFTER STORAGE7-83
8 TROUBLESHOOTING
FAULT CODE RESOLUTION
INTRODUCTION 8-1
ALARM(S)
FAULT CODES AND SYMBOLS8-2
SYMPTOM(S)
ENGINE 8-4
TRANSMISSION 8-5
HYDRAULICS 8-5
THREE POINT HITCH 8-6
BRAKES8-6
CAB 8-6
ELECTRICAL SYSTEM8-7
9 SPECIFICATIONS
GENERAL DIMENSIONS 9-1
MINIMUM TURN RADIUS9-3
AXLE DIMENSION 9-4
MAXIMUM OPERATING ANGLE 9-5
MAXIMUM OPERATING WEIGHTS 9-5
TRACTOR WEIGHTS 9-6
CAPACITIES 9-7
ENGINE 9-8
FUEL SYSTEM9-8
AIR CLEANER SYSTEM 9-9
COOLING SYSTEM 9-9
TRANSMISSION 9-9
REAR POWER TAKE-OFF 9-10
FRONT POWER TAKE OFF9-10
THREE POINT HITCH9-11
THREE POINT HITCH FRONT9-12
HYDRAULIC SYSTEM9-12
REMOTE CONTROL VALVES 9-13
FRONT REMOTE VALVE COUPLERS 9-13
BRAKES 9-14
STEERING9-14
ELECTRICAL EQUIPMENT9-15
GROUND SPEED CHART 9-16
MINIMUM HARDWARE TIGHTENING TORQUES 9-19
10 ACCESSORIES
EXTERNAL REAR VIEW MIRRORS10-1
AUXILIARY HEADLIGHTS 10-2
ROTATING BEACON 10-3
11 FORMS AND DECLARATIONS
Service record 1st 50 hour, Owner copy11-1
Service record 1st 50 hour, Dealer copy11-3

INDEX DETAILS:

ACCESS TO OPERATOR’S PLATFORM 3-1
CAB AIR FILTERS 3-5
CAB AIR PRESSURISATION MONITOR (where fitted) 3-8
CABLE AND WIRING ROUTING3-7
IMPLEMENT MONITOR INSTALLATION 3-8
IN CAB STORAGE (where fitted)3-6
INTRODUCTION 3-1
MOBILE TELEPHONE USAGE 3-7
ACCESSORIES 10-1
AUXILIARY HEADLIGHTS 10-2
EXTERNAL REAR VIEW MIRRORS 10-1
ROTATING BEACON10-3
ALARM(S)8-2
FAULT CODES AND SYMBOLS 8-2
AUXILIARY POWER CONNECTIONS 6-190
DIAGNOSTIC SOCKET6-190
ELECTRICAL POWER CONNECTORS 6-191
EXTERNAL POWER CONNECTORS6-193
INTERNAL POWER CONNECTORS 6-191
TRAILER SOCKET ELECTRICAL6-190
BALLASTING AND TYRES 6-179
BALLASTING AND TYRES6-179
IRON WEIGHTS (where fitted)6-182
LIQUID BALLAST 6-185
TYRE INFLATION 6-187
TYRE PRESSURES AND PERMISSIBLE LOADS 6-188
COMMISSIONING THE UNIT4-1
TRACTOR REFUELLING 4-1
CONTROLS/INSTRUMENTS 3-1
ACCESSING STORED ERROR CODES 3-76
ADJUST MENU 3-50
AIR SUSPENSION SEAT DELUXE3-10
ALARM FUNCTIONS3-74
ARMREST COLOUR DISPLAY 3-60
AUTOMATIC TEMPERATURE CONTROL (ATC)3-34
BATTERY ISOLATOR SWITCH3-31
CAB AIR FILTERS 3-5
CAB AIR PRESSURISATION MONITOR (where fitted) 3-8
CABLE AND WIRING ROUTING3-7
CLIMATE CONTROLS 3-32
CLUTCH/ INCHING PEDAL3-20
CONFIGURE MENU 3-52
DISPLAYS 3-43
FAST STEERING SYSTEM (where fitted)3-29
FOLLOW ME HOME LIGHTS 3-18
FOOT BRAKES 3-22
FOOT THROTTLE PEDAL 3-20
GAUGES 3-39
HAND THROTTLE3-21
HANDBRAKE 3-24
HAZARD WARNING LIGHT SWITCH 3-17
HYDRAULIC MASTER SWITCH 3-28
IMPLEMENT MONITOR INSTALLATION 3-8
IN CAB STORAGE (where fitted)3-6
INDICATOR AND WARNING LIGHTS 3-40
INSTRUCTIONAL SEAT (where fitted)3-16
INTEGRATED CONTROL PANEL 3-25
INTEGRATED CONTROL UNIT3-39
INTERIOR LIGHT3-38
INTRODUCTION 3-1
KEY- START SWITCH 3-17
KEYPAD BASIC 3-46
KEYPAD ENHANCED3-47
LIGHT-/ TURN LEVER 3-18
MANUAL TEMPERATURE CONTROL3-33
MOBILE TELEPHONE USAGE 3-7
PERFORMANCE MONITOR3-55
PERFORMANCE MONITOR ON COLOUR DISPLAY 3-68
POP- UP SCREENS ON COLOUR DISPLAY3-62
PROGRAMMING THE DISPLAYS 3-71
RADIO (where fitted) 3-36
SEAT BELT3-15
SELECTING OR CHANGING THE DISPLAY SETTINGS 3-49
STEERING COLUMN3-23
SWITCH PANEL WORKLIGHTS 3-36
SWITCHES ON C-PILLAR 3-26
TRANSMISSION DISPLAY 3-44
WARNING AND ADVISORY SYMBOLS 3-77
WINDSHIELD WIPER AND WASHER CONTROLS 3-19
DRAWBARS AND TOWING ATTACHMENTS6-143
AUTOMATIC PICK-UP HITCH6-149
DRAWBARS AND TOWING ATTACHMENTS 6-143
REAR TOW HITCH 6-151
SWINGING DRAWBARS 6-146
ELECTRO-HYDRAULIC REMOTE CONTROL VALVES (where fitted)6-96
CONNECTING REMOTE CYLINDERS 6-118
CREATING TIMER PROGRAMMES 6-111
EXTERNAL EHR CONTROLS6-126
HYDRAULIC OIL LEVEL WHEN USING REMOTE HYDRAULIC EQUIPMENT6-127
JOYSTICK OPERATION WITH A FRONT LOADER6-122
MID MOUNT REMOTE VALVES 6-124
OPERATING WITH REMOTE VALVES 6-120
REMOTE CONTROL VALVES 6-96
SETTING THE REMOTE VALVE PRIORITY6-109
SETTINGS AND ADJUSTMENTS6-103
EVERY 10 HOURS OR EACH DAY 7-17
CHECK ENGINE COOLANT LEVEL 7-17
CHECK ENGINE OIL LEVEL 7-18
CHECK REMOTE CONTROL VALVE DRAIN BOTTLES7-18
CHECK WINDSCREEN WASHER RESERVOIR7-19
DRAIN AIR RESERVOIR ON AIR OPERATED TRAILER BRAKE 7-19
EVERY 100 HOURS7-30
INSPECT COMPRESSOR DRIVE BELT 7-30
INSPECT POLY V-BELT7-30
EVERY 1200 HOURS OR ANNUALLY 7-43
CHANGE 4WD DIFFERENTIAL OIL 7-46
CHANGE 4WD PLANETARY HUB OIL7-47
CHANGE CAB AIR FILTERS7-43
CHANGE FRONT PTO GEARBOX OIL 7-47
CHANGE MAIN OIL FILTER CARTRIDGE7-44
CHANGE TRANSMISSION/ REAR AXLE AND HYDRAULIC OIL 7-45
GREASE REAR AXLE SHAFT BEARING7-48
EVERY 1200 HOURS OR EVERY 2 YEARS 7-49
CHANGE AIR BRAKE DRIER RESERVOIR 7-57
CHANGE DEF/ AdBlue INLINE FILTER 7-52
CHANGE ENGINE AIR CLEANER INNER ELEMENT 7-51
CHANGE ENGINE BREATHER FILTER 7-52
CHANGE ENGINE COOLANT FLUID 7-53
CHANGE POLY V-BELTS 7-58
CHECK BATTERY FLUID LEVEL 7-49
CHECK VALVE TAPPET CLEARANCE7-52
EVERY 300 HOURS7-32
ADJUST HANDBRAKE 7-34
CHECK 4WD FRONT AXLE DIFFERENTIAL AND HUBS OIL LEVEL7-35
CHECK BATTERY FLUID LEVEL 7-32
CHECK FRONT PTO GEARBOX OIL LEVEL 7-35
CHECK TRANSMISSION/REAR AXLE AND HYDRAULIC OIL LEVEL 7-34
EVERY 36 MONTHS7-61
CHECK BATTERY FLUID LEVEL 7-62
SERVICE AIR CONDITIONER SYSTEM 7-61
EVERY 3600 HOURS OR EVERY 2 YEARS 7-60
CHANGE DEF/ AdBlue MAIN FILTER 7-60
EVERY 50 HOURS 7-21
ALL GREASE FITTINGS7-24
CHECK FRONT AND REAR WHEEL NUTS 7-29
CHECK TYRE PRESSURES AND TYRE CONDITION 7-29
CLEAN CAB AIR FILTER7-21
CLEAN COOLER SECTION7-23
EVERY 600 HOURS7-36
CHANGE CHARGE PUMP OIL FILTER 7-40
CHANGE ENGINE AIR CLEANER OUTHER ELEMENT7-39
CHANGE ENGINE OIL AND FILTER 7-36
CHANGE FUEL PRE-FILTER AND FUEL FILTER ELEMENT 7-38
CHECK ENGINE AIR INTAKE CONNECTIONS 7-41
CHECK TRANSMISSION OIL COOLER PIPE COUPLINGS 7-42
CLEAN DEF/ AdBlue INLINE FILTER 7-42
FAULT CODE RESOLUTION 8-1
INTRODUCTION 8-1
FIRST 50 HOURS7-20
SERVICE OPERATIONS7-20
FORMS AND DECLARATIONS 11-1
Service record 1st 50 hour, Dealer copy 11-3
Service record 1st 50 hour, Owner copy 11-1
FORWARD CONTROLS 3-17
CLUTCH/ INCHING PEDAL3-20
FOLLOW ME HOME LIGHTS 3-18
FOOT BRAKES 3-22
FOOT THROTTLE PEDAL 3-20
HAND THROTTLE3-21
HAZARD WARNING LIGHT SWITCH 3-17
KEY- START SWITCH 3-17
LIGHT-/ TURN LEVER 3-18
STEERING COLUMN3-23
WINDSHIELD WIPER AND WASHER CONTROLS 3-19
FRONT HITCH6-80
AUXILIARY FRONT COUPLERS (where fitted) 6-88
EXTERNAL HITCH CONTROLS 6-90
FRONT HITCH MANAGEMENT6-91
HITCH OPERATION 6-83
SETTINGS AND ADJUSTMENTS 6-80
FRONT POWER TAKE OFF 6-64
PTO OPERATION 6-64
GENERAL INFORMATION1-1
BEFORE OPERATING THE TRACTOR 1-12
CAB IDENTIFICATION1-9
CE DECLARATION OF CONFORMITY 1-1
DRIVELINE IDENTIFICATION 1-9
ECOLOGY AND THE ENVIRONMENT1-10
ENGINE IDENTIFICATION 1-8
INSTRUCTOR’S SEAT 1-19
INTERNATIONAL SYMBOLS 1-13
MACHINE STABILITY1-15
METRIC AND IMPERIAL UNITS ABBREVIATIONS 1-3
NOISE LEVEL INFORMATION SHEET1-11
PRODUCT IDENTIFICATION1-7
PRODUCT IDENTIFICATION PLATE 1-9
PROGRAMMING TRACTOR FUNCTIONS 1-11
SELECTIVE CATALYTIC REDUCTION (SCR) SYSTEM1-20
TO THE OWNER 1-5
VIBRATION LEVEL INFORMATION SHEET 1-14
GENERAL INFORMATION6-1
AUTOMATED HEADLAND FUNCTIONS 6-11
CONSTANT ENGINE SPEED6-3
DELETING A SEQUENCE WITH COLOUR DISPLAY 6-26
DIFFERENTIAL LOCK6-6
EXPLANATION OF SYMBOLS 6-13
FOUR WHEEL DRIVE6-8
FRONT AXLE SUSPENSION (where fitted) 6-10
HEADLAND FUNCTION AND COLOUR DISPLAY SCREENS 6-23
QUICK GUIDE6-11
RE-PLAYING A SEQUENCE6-19
RECORDING A SEQUENCE 6-17
RECORDING AND RE-PLAYING 6-14
VARIABLE ENGINE POWER MANAGEMENT6-1
GENERAL INFORMATION7-1
BIODIESEL FUEL 7-4
CAPACITIES 7-11
ENGINE OIL CHANGE7-5
FUEL REQUIREMENT7-2
GENERAL SPECIFICATIONS 7-10
INTRODUCTION 7-1
LUBRICANTS AND COOLANTS7-8
PROTECTIVE DEVICES 7-6
TRACTOR JACKING POINTS 7-10
GENERAL MAINTENANCE 7-64
ADJUST AUTOMATICK PICK- UP HITCH7-69
ADJUST CAB SUSPENSION (where fitted) 7-68
BATTERY REMOVAL AND INSTALLATION 7-81
BLEEDING FUEL INJECTION SYSTEM 7-66
BULB REPLACEMENT 7-71
CHECK BRAKE PEDAL LATCHING/UNLATCHING 7-67
CLEANING THE TRACTOR7-64
FUEL SYSTEM PRE- FILTER AND WATER TRAP 7-66
FUSES AND RELAYS7-75
HEADLIGHT AND WORKLAMP ADJUSTMENT 7-70
PROTECTING ELECTRONIC AND ELECTRICAL SYSTEMS DURING BATTERY CHARGING OR
WELDING 7-80
HYDRAULIC POWER BEYOND PORT 6-129
HYDRAULIC POWER BEYOND FOR EXTERNAL SERVICES 6-129
INSTRUCTOR’S SEAT 3-16
INSTRUCTIONAL SEAT (where fitted)3-16
INSTRUMENT CLUSTER 3-39
ACCESSING STORED ERROR CODES 3-76
ADJUST MENU 3-50
ALARM FUNCTIONS3-74
ARMREST COLOUR DISPLAY 3-60
CONFIGURE MENU 3-52
DISPLAYS 3-43
GAUGES 3-39
INDICATOR AND WARNING LIGHTS 3-40
INTEGRATED CONTROL UNIT3-39
KEYPAD BASIC 3-46
KEYPAD ENHANCED3-47
PERFORMANCE MONITOR3-55
PERFORMANCE MONITOR ON COLOUR DISPLAY 3-68
POP- UP SCREENS ON COLOUR DISPLAY3-62
PROGRAMMING THE DISPLAYS 3-71
SELECTING OR CHANGING THE DISPLAY SETTINGS 3-49
TRANSMISSION DISPLAY 3-44
WARNING AND ADVISORY SYMBOLS 3-77
LEFT-HAND SIDE CONTROLS3-24
HANDBRAKE 3-24
MAINTENANCE7-1
ADJUST AUTOMATICK PICK- UP HITCH7-69
ADJUST CAB SUSPENSION (where fitted) 7-68
ADJUST HANDBRAKE 7-34
ALL GREASE FITTINGS7-24
BATTERY REMOVAL AND INSTALLATION 7-81
BIODIESEL FUEL 7-4
BLEEDING FUEL INJECTION SYSTEM 7-66
BULB REPLACEMENT 7-71
CAPACITIES 7-11
CHANGE 4WD DIFFERENTIAL OIL 7-46
CHANGE 4WD PLANETARY HUB OIL7-47
CHANGE AIR BRAKE DRIER RESERVOIR 7-57
CHANGE CAB AIR FILTERS7-43
CHANGE CHARGE PUMP OIL FILTER 7-40
CHANGE DEF/ AdBlue INLINE FILTER 7-52
CHANGE DEF/ AdBlue MAIN FILTER 7-60
CHANGE ENGINE AIR CLEANER INNER ELEMENT 7-51
CHANGE ENGINE AIR CLEANER OUTHER ELEMENT7-14
CHANGE ENGINE AIR CLEANER OUTHER ELEMENT7-39
CHANGE ENGINE BREATHER FILTER 7-52
CHANGE ENGINE COOLANT FLUID 7-53
CHANGE ENGINE OIL AND FILTER 7-36
CHANGE FRONT PTO GEARBOX OIL 7-47
CHANGE FUEL PRE-FILTER AND FUEL FILTER ELEMENT 7-38
CHANGE MAIN OIL FILTER CARTRIDGE7-44
CHANGE POLY V-BELTS 7-58
CHANGE TRANSMISSION/ REAR AXLE AND HYDRAULIC OIL 7-45
CHECK 4WD FRONT AXLE DIFFERENTIAL AND HUBS OIL LEVEL7-35
CHECK BATTERY FLUID LEVEL 7-32
CHECK BATTERY FLUID LEVEL 7-49
CHECK BATTERY FLUID LEVEL 7-62
CHECK BRAKE FLUID LEVEL 7-16
CHECK BRAKE PEDAL LATCHING/UNLATCHING 7-67
CHECK ENGINE AIR INTAKE CONNECTIONS 7-41
CHECK ENGINE COOLANT LEVEL 7-17
CHECK ENGINE OIL LEVEL 7-18
CHECK FRONT AND REAR WHEEL NUTS 7-29
CHECK FRONT PTO GEARBOX OIL LEVEL 7-35
CHECK REMOTE CONTROL VALVE DRAIN BOTTLES7-18
CHECK TRANSMISSION OIL COOLER PIPE COUPLINGS 7-42
CHECK TRANSMISSION/REAR AXLE AND HYDRAULIC OIL LEVEL 7-34
CHECK TYRE PRESSURES AND TYRE CONDITION 7-29
CHECK VALVE TAPPET CLEARANCE7-52
CHECK WINDSCREEN WASHER RESERVOIR7-19
CLEAN CAB AIR FILTER7-21
CLEAN COOLER SECTION7-23
CLEAN DEF/ AdBlue INLINE FILTER 7-42
CLEANING THE TRACTOR7-64
DRAIN AIR RESERVOIR ON AIR OPERATED TRAILER BRAKE 7-19
DRAIN FUEL SYSTEM WATER SEPARATOR 7-15
ENGINE OIL CHANGE7-5
FUEL REQUIREMENT7-2
FUEL SYSTEM PRE- FILTER AND WATER TRAP 7-66
FUSES AND RELAYS7-75
GENERAL SPECIFICATIONS 7-10
GREASE REAR AXLE SHAFT BEARING7-48
HEADLIGHT AND WORKLAMP ADJUSTMENT 7-70
INSPECT COMPRESSOR DRIVE BELT 7-30
INSPECT POLY V-BELT7-30
INTRODUCTION 7-1
LUBRICANTS AND COOLANTS7-8
Maintenance Chart 7-12
PREPARATION FOR USE AFTER STORAGE 7-83
PROTECTING ELECTRONIC AND ELECTRICAL SYSTEMS DURING BATTERY CHARGING OR
WELDING 7-80
PROTECTIVE DEVICES 7-6
SERVICE AIR CONDITIONER SYSTEM 7-61
SERVICE OPERATIONS7-20
TRACTOR JACKING POINTS 7-10
TRACTOR STORAGE 7-83
MAINTENANCE CHART 7-12
Maintenance Chart 7-12
MOVING THE UNIT 4-10
LOW IDLE SPEED MANAGEMENT 4-11
OPERATING IN COLD TEMPERATURES4-10
OPERATING INSTRUCTIONS4-1
AUTOMATIC ENGINE SHUTDOWN4-8
AUTOMATIC ENGINE SHUTDOWN WITH ENHANCED KEYPAD (where fitted) 4-9
BOOSTING THE BATTERY 4-7
COOLANT IMMERSION HEATER (where fitted) 4-6
FUEL HEATER (where fitted)4-5
GRID HEATER COLD START AID (where fitted) 4-5
LOW IDLE SPEED MANAGEMENT 4-11
OPERATING IN COLD TEMPERATURES4-10
STARTING THE ENGINE 4-3
STOPPING THE ENGINE4-8
TRACTOR REFUELLING 4-1
TRANSMISSION OIL HEATER (where fitted) 4-6
OPERATOR’S SEAT3-10
AIR SUSPENSION SEAT DELUXE3-10
SEAT BELT3-15
OVERHEAD CONTROLS 3-36
INTERIOR LIGHT3-38
RADIO (where fitted) 3-36
SWITCH PANEL WORKLIGHTS 3-36
PREPARING FOR ROAD TRANSPORT 5-1
CARRYING THE TRACTOR ON A TRANSPORTER 5-1
SECURE THE HIGH VISIBILITY ROOF PANEL 5-1
REAR HITCH 6-66
ELECTRONIC DRAFT CONTROL 6-66
ELECTRONIC DRAFT CONTROL OPERATION 6-72
EXTERNAL HITCH CONTROLS 6-78
SETTINGS AND DISPLAY 6-70
REAR POWER TAKE-OFF 6-50
ATTACHING PTO DRIVEN EQUIPMENT6-51
AUTO PTO OPERATION 6-61
CHANGING THE PTO OUTPUT SHAFT6-50
EXTERNAL PTO CONTROLS6-59
GROUND DRIVE PTO (where fitted) 6-58
PTO OPERATING PRECAUTIONS 6-50
PTO OPERATION 6-52
THREE-SPEED PTO SYSTEM 6-57
REARWARD CONTROLS3-26
AUTOMATIC TEMPERATURE CONTROL (ATC)3-34
BATTERY ISOLATOR SWITCH3-31
CLIMATE CONTROLS 3-32
FAST STEERING SYSTEM (where fitted)3-29
HYDRAULIC MASTER SWITCH 3-28
MANUAL TEMPERATURE CONTROL3-33
SWITCHES ON C-PILLAR 3-26
RECOVERY TRANSPORT5-2
TOWING THE TRACTOR5-2
RIGHT-HAND SIDE CONTROLS 3-25
INTEGRATED CONTROL PANEL 3-25
SAFETY INFORMATION2-1
BEFORE DRIVING THE TRACTOR2-2
DIESEL FUEL 2-9
DRIVING THE TRACTOR2-3
FIRE EXTINGUISHER 2-11
INTENDED USE STATEMENT 2-15
OPERATING THE EXTERNAL CONTROLS 2-6
OPERATING THE PTO 2-6
OPERATING THE TRACTOR2-4
PREVENTION OF FIRE OR EXPLOSION2-10
PROTECTION OFFERED BY THE TRACTOR 2-12
SAFETY ASPECTS 2-17
SAFETY DECALS2-24
SAFETY PRECAUTIONS2-1
SERVICING THE TRACTOR 2-7
SPECIFICATIONS9-1
AIR CLEANER SYSTEM 9-9
AXLE DIMENSION9-4
BRAKES 9-14
CAPACITIES9-7
COOLING SYSTEM 9-9
ELECTRICAL EQUIPMENT9-15
ENGINE 9-8
FRONT POWER TAKE OFF9-10
FRONT REMOTE VALVE COUPLERS9-13
FUEL SYSTEM9-8
GENERAL DIMENSIONS9-1
GROUND SPEED CHART 9-16
HYDRAULIC SYSTEM 9-12
MAXIMUM OPERATING ANGLE9-5
MAXIMUM OPERATING WEIGHTS 9-5
MINIMUM HARDWARE TIGHTENING TORQUES 9-19
MINIMUM TURN RADIUS9-3
REAR POWER TAKE-OFF 9-10
REMOTE CONTROL VALVES 9-13
STEERING9-14
THREE POINT HITCH 9-11
THREE POINT HITCH FRONT 9-12
TRACTOR WEIGHTS 9-6
TRANSMISSION 9-9
STARTING THE UNIT4-3
BOOSTING THE BATTERY 4-7
COOLANT IMMERSION HEATER (where fitted) 4-6
FUEL HEATER (where fitted)4-5
GRID HEATER COLD START AID (where fitted) 4-5
STARTING THE ENGINE 4-3
TRANSMISSION OIL HEATER (where fitted) 4-6
STOPPING THE UNIT 4-8
AUTOMATIC ENGINE SHUTDOWN4-8
AUTOMATIC ENGINE SHUTDOWN WITH ENHANCED KEYPAD (where fitted) 4-9
STOPPING THE ENGINE4-8
STORAGE 7-83
PREPARATION FOR USE AFTER STORAGE 7-83
TRACTOR STORAGE 7-83
SYMPTOM(S) 8-4
BRAKES8-6
CAB 8-6
ELECTRICAL SYSTEM 8-7
ENGINE 8-4
HYDRAULICS 8-5
THREE POINT HITCH8-6
TRANSMISSION 8-5
THREE POINT HITCH6-132
ATTACHING THREE-POINT HITCH EQUIPMENT 6-132
FLEXIBLE LINK END ADJUSTMENT6-137
LIFT ROD ADJUSTMENT 6-134
LINKAGE STABILISER ADJUSTMENT 6-140
QUICK HITCH 6-138
TOP LINK ADJUSTMENT 6-136
TRAILER BRAKING SYSTEMS 6-157
AIR-OPERATED TRAILER BRAKES 6-157
AIR-OPERATED TRAILER BRAKES (Italy only)6-160
AUXILIARY AIR SUPPLY CONNECTOR (where fitted)6-161
HYDRAULIC TRAILER BRAKES 6-162
HYDRAULIC TRAILER BRAKES (Italy only)6-163
TRAILER BRAKE BIAS CONTROL 6-161
TRANSMISSION 6-27
AUTO SHIFT FUNCTION6-42
AUTO SHIFTING IN FIELD MODE 6-42
AUTO SHIFTING IN ROAD MODE6-46
AUTO TAKE OFF 6-40
CREEPER GEARS (where fitted) 6-48
DRIVING THE TRACTOR 6-37
ERROR CODES 6-49
POWERSHIFT CONTROL 6-33
SEMI POWERSHIFT TRANSMISSION6-29
SHUTTLE LEVER6-27
SHUTTLE MODE 6-35
SPEED MATCHING 6-41
TRANSMISSION DISPLAY 6-31
TRANSMISSION OPERATION 6-29
TRANSPORT OPERATIONS 5-1
CARRYING THE TRACTOR ON A TRANSPORTER 5-1
SECURE THE HIGH VISIBILITY ROOF PANEL 5-1
TOWING THE TRACTOR5-2
TROUBLESHOOTING 8-1
BRAKES8-6
CAB 8-6
ELECTRICAL SYSTEM 8-7
ENGINE 8-4
FAULT CODES AND SYMBOLS 8-2
HYDRAULICS 8-5
INTRODUCTION 8-1
THREE POINT HITCH8-6
TRANSMISSION 8-5
WHEEL TRACK ADJUSTMENT 6-164
BAR TYPE AXLE (where fitted) 6-175
FLANGE TYPE AXLE (where fitted) 6-171
FRONT AXLE OSCILLATION STOPS6-168
FRONT FENDER6-169
FRONT WHEEL ALIGNMENT6-167
FRONT WHEEL TRACK ADJUSTMENT6-164
REAR WHEEL TRACK ADJUSTMENT 6-171
STEERING STOPS 6-168
WHEN THE WARNING LAMP LIGHTS 7-14
CHANGE ENGINE AIR CLEANER OUTHER ELEMENT7-14
CHECK BRAKE FLUID LEVEL 7-16
DRAIN FUEL SYSTEM WATER SEPARATOR 7-15
WORKING OPERATIONS 6-1
AIR-OPERATED TRAILER BRAKES 6-157
AIR-OPERATED TRAILER BRAKES (Italy only)6-160
ATTACHING PTO DRIVEN EQUIPMENT6-51
ATTACHING THREE-POINT HITCH EQUIPMENT 6-132
AUTO PTO OPERATION 6-61
AUTO SHIFT FUNCTION6-42
AUTO SHIFTING IN FIELD MODE 6-42
AUTO SHIFTING IN ROAD MODE6-46
AUTO TAKE OFF 6-40
AUTOMATED HEADLAND FUNCTIONS 6-11
AUTOMATIC PICK-UP HITCH6-149
AUXILIARY AIR SUPPLY CONNECTOR (where fitted)6-161
AUXILIARY FRONT COUPLERS (where fitted) 6-88
BALLASTING AND TYRES6-179
BAR TYPE AXLE (where fitted) 6-175
CHANGING THE PTO OUTPUT SHAFT6-50
CONNECTING REMOTE CYLINDERS 6-118
CONSTANT ENGINE SPEED6-3
CREATING TIMER PROGRAMMES 6-111
CREEPER GEARS (where fitted) 6-48
DELETING A SEQUENCE WITH COLOUR DISPLAY 6-26
DIAGNOSTIC SOCKET6-190
DIFFERENTIAL LOCK6-6
DRAWBARS AND TOWING ATTACHMENTS 6-143
DRIVING THE TRACTOR 6-37
ELECTRICAL POWER CONNECTORS 6-191
ELECTRONIC DRAFT CONTROL 6-66
ELECTRONIC DRAFT CONTROL OPERATION 6-72
ERROR CODES 6-49
EXPLANATION OF SYMBOLS 6-13
EXTERNAL EHR CONTROLS6-126
EXTERNAL HITCH CONTROLS 6-78
EXTERNAL HITCH CONTROLS 6-90
EXTERNAL PTO CONTROLS6-59
EXTERNAL POWER CONNECTORS6-193
FLANGE TYPE AXLE (where fitted) 6-171
FLEXIBLE LINK END ADJUSTMENT6-137
FOUR WHEEL DRIVE6-8
FRONT AXLE OSCILLATION STOPS6-168
FRONT AXLE SUSPENSION (where fitted) 6-10
FRONT FENDER6-169
FRONT HITCH MANAGEMENT6-91
FRONT WHEEL ALIGNMENT6-167
FRONT WHEEL TRACK ADJUSTMENT6-164
GROUND DRIVE PTO (where fitted) 6-58
HEADLAND FUNCTION AND COLOUR DISPLAY SCREENS 6-23
HITCH OPERATION 6-83
HYDRAULIC OIL LEVEL WHEN USING REMOTE HYDRAULIC EQUIPMENT6-127
HYDRAULIC POWER BEYOND FOR EXTERNAL SERVICES 6-129
HYDRAULIC TRAILER BRAKES 6-162
HYDRAULIC TRAILER BRAKES (Italy only)6-163
INTERNAL POWER CONNECTORS 6-191
IRON WEIGHTS (where fitted)6-182
JOYSTICK OPERATION WITH A FRONT LOADER6-122
LIFT ROD ADJUSTMENT 6-134
LINKAGE STABILISER ADJUSTMENT 6-140
LIQUID BALLAST 6-185
MID MOUNT REMOTE VALVES 6-124
OPERATING WITH REMOTE VALVES 6-120
PTO OPERATING PRECAUTIONS 6-50
PTO OPERATION 6-52
PTO OPERATION 6-64
POWERSHIFT CONTROL 6-33
QUICK GUIDE6-11
QUICK HITCH 6-138
RE-PLAYING A SEQUENCE6-19
REAR TOW HITCH 6-151
REAR WHEEL TRACK ADJUSTMENT 6-171
RECORDING A SEQUENCE 6-17
RECORDING AND RE-PLAYING 6-14
REMOTE CONTROL VALVES 6-96
SEMI POWERSHIFT TRANSMISSION6-29
SETTING THE REMOTE VALVE PRIORITY6-109
SETTINGS AND ADJUSTMENTS 6-80
SETTINGS AND ADJUSTMENTS6-103
SETTINGS AND DISPLAY 6-70
SHUTTLE LEVER6-27
SHUTTLE MODE 6-35
SPEED MATCHING 6-41
STEERING STOPS 6-168
SWINGING DRAWBARS 6-146
THREE-SPEED PTO SYSTEM 6-57
TOP LINK ADJUSTMENT 6-136
TRAILER BRAKE BIAS CONTROL 6-161
TRAILER SOCKET ELECTRICAL6-190
TRANSMISSION DISPLAY 6-31
TRANSMISSION OPERATION 6-29
TYRE INFLATION 6-187
TYRE PRESSURES AND PERMISSIBLE LOADS 6-188
VARIABLE ENGINE POWER MANAGEMENT6-1

PLEASE NOTE:

• This is the SAME exact manual used by your dealers to fix your vehicle.
• The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
• Any queries / doubts regarding your purchase, please feel free to contact [email protected]