CLAAS LEXION 580 / 570 LEXION 560 / 550 LEXION 540 / 540 C LEXION 530 / 520 / 510 Multi Coupling for LEXION Cutterbars Conversion Instruction Manual_DE_EN_FR
DESCRIPTION:
CLAAS LEXION 580 / 570 LEXION 560 / 550 LEXION 540 / 540 C LEXION 530 / 520 / 510 Multi Coupling for LEXION Cutterbars Conversion Instruction Manual_DE_EN_FR
INTRODUCTION
- These instructions describe the safe and timesaving work sequence for conversion of the multi coupling on the cutterbars. The following cutterbars for the combine harvesters LEXION 580 – 510 can be retrofitted with the conversion kit parts no. 0517 965.0:
- Soy cutterbar F 20 – F 30: starting from 43801205 up to 43801330, Soy cutterbar 4.50 – 9.00 m, starting from 44000059, Grain cutterbar G 25 – G 30 starting from 70700266, Grain cutterbar 7.50 – 9.00 m, starting from 71100000, Vario cutterbars 5.40 – 9.00m, starting from 71200000, Grain cutterbar 3.90 – 9.00 m, starting from 71400000.
- The standard mounting time is approx. 1.5 man hour. See page 4.1 for the shipping package. Observe the „Safety Rules“ in the applicable operator’s manual
General
information
IMPORTANT
- The instructions contained in this manual should be carefully read and observed by all persons who are concerned with the operation, maintenance and inspection of this machine/ front attachment in order to prevent accidents.
- Especially the »Safety Rules« in the operator’s manual should be read with the utmost care and adhered to. In addition, please also observe the accident prevention regulations that apply for your own country. Before commencing with the job, ensure that all the tools and service aids are available. Compare existing machine type/front attachment type with the list
- in the chapter »Shipping Package« and the parts kit supplied. The specification of the components, e.g. bolts, is shown on the shipping package. The shipping package shows the position number (pos. no.) of the components. Parts such as nuts and contact washers do not have a position number but belong to the bolt listed above which does have a position number.
- Additional part specifications are the parts no., description, measurements, DIN and the quantity. In order to help with the assembly, existing components in the instructions are identified with letters, whereas new parts have been identified with a number (position number). The text and pictures were kept neutral as far as possible. Differences between the individual
- types are mentioned in the text. Technical data, dimensions and weights are given as an indication only. CLAAS reserve the right to make changes subsequently as technical developments continue. Responsibility for errors or omissions not accepted. Front, rear, right and left refer to the direction of forward travel.
TABLE OF CONTENTS:
CLAAS LEXION 580 / 570 LEXION 560 / 550 LEXION 540 / 540 C LEXION 530 / 520 / 510 Multi Coupling for LEXION Cutterbars Conversion Instruction Manual_DE_EN_FR
CONTENTS
1 Introduction
Introduction 11
2 Contents
Contents 21
3 General information
Important 31
Identification of warnings and danger signs 32
Correct use 32
4 Shipping Package
Shipping Package 41
Conversion kit 0517 9650 41
5 Conversion
Converting the multi coupling 51
Preparing for conversion 51
Installing the wiring loom (2), the rotation
speed pick-up (3) and the chain pinion (8) 51
Dismounting the multi coupling 55
Dismounting the lateral cover (K) 55
Installing the coupling mounting (11) and the support (9)
to the existing lateral cover 56
Installing the holder (16) for the multi coupling (LEXION
with dust extraction) 57
Installing the holder (19) for the multi coupling (LEXION
without dust extraction) 58
Installing the multi coupling (21) (LEXION with
dust extraction) 58
Installing the multi coupling (21) (LEXION
without dust extraction) 59
Preparing and performing the test run 511
IMAGES PREVIEW OF THE MANUAL:
VIDEO PREVIEW OF THE MANUAL:
PLEASE NOTE:
- This is the same manual used by the DEALERSHIPS to SERVICE your vehicle.
- The manual can be all yours – Once payment is complete, you will be taken to the download page from where you can download the manual. All in 2-5 minutes time!!
- Need any other service / repair / parts manual, please feel free to contact us at heydownloadss @gmail.com . We may surprise you with a nice offer
S.M