Wacker Neuson Drive Unit MD 3.5 Operator’s Manual – PDF DOWNLOAD
DESCRIPTION:
Wacker Neuson Drive Unit MD 3.5 Operator’s Manual – PDF DOWNLOAD
Foreword MD 3.5
Expectations for information in this manual
This manual provides information and procedures to safely operate and
maintain the above Wacker Neuson model(s). For your own safety and to
reduce the risk of injury, carefully read, understand, and observe all instructions
described in this manual.
Wacker Neuson expressly reserves the right to make technical modifications,
even without notice, which improve the performance or safety standards of its
machines.
The information contained in this manual is based on machines manufactured
up until the time of publication. Wacker Neuson reserves the right to change
any portion of this information without notice.
The illustrations, parts, and procedures in this manual refer to Wacker Neuson
factory-installed components. Your machine may vary depending on the
requirements of your specific region.
IMAGES PREVIEW OF THE MANUAL:
TABLE OF CONTENTS:
Wacker Neuson Drive Unit MD 3.5 Operator’s Manual – PDF DOWNLOAD
Drive Unit………………………………………………………………………… 1
Foreword………………………………………………………………………….. 3
1 Safety Information……………………………………………………………….. 7
1.1 Signal Words Used in this Manual……………………………………………… 7
1.2 Machine Description and Intended Use………………………………………….. 8
1.3 Operating Safety……………………………………………………………. 9
1.4 Operator Safety while Using Internal Combustion Engines………………………….11
1.5 Service Safety………………………………………………………………11
2 Labels…………………………………………………………………………..13
2.1 Label Locations……………………………………………………………..13
2.2 Label Meanings………………………………………………………………14
3 Lifting and Transporting…………………………………………………………..16
4 Operation………………………………………………………………………..17
4.1 Preparing the Machine for First Use……………………………………………17
4.2 Recommended Fuel…………………………………………………………….17
4.3 Application…………………………………………………………………18
4.4 Functionality……………………………………………………………….18
4.5 Drive Components and Controls…………………………………………………19
4.6 Flexible Shaft Components…………………………………………………….20
4.7 Vibrator Head Components……………………………………………………..20
4.8 Mounting the Vibrator Head……………………………………………………21
4.9 Coupling the Flexible Shaft to the Drive……………………………………….22
4.10 Before Starting the Machine………………………………………………….23
4.11 Starting the Machine………………………………………………………..23
4.12 Stopping the Machine………………………………………………………..24
5 Maintenance………………………………………………………………………25
5.1 Maintaining the Emission Control System………………………………………..25
5.2 Periodic Maintenance Schedule…………………………………………………25
5.3 Servicing the Flexible Shaft………………………………………………….27
5.4 Replacing the Plastic Bushing…………………………………………………28
5.5 Lubricating the Shaft Core……………………………………………………29
5.6 Servicing the Vibrator Head…………………………………………………..30
5.7 Changing the Oil in the Vibrator Head………………………………………….31
5.8 Servicing the Spark Plug……………………………………………………..33
5.9 Servicing the Air Cleaner…………………………………………………….34
5.10 Changing the Engine Oil……………………………………………………..35
5.11 Storage……………………………………………………………………35
6 Troubleshooting…………………………………………………………………..36
7 Technical Data……………………………………………………………………37
7.1 Engine Data…………………………………………………………………37
7.2 Machine Data………………………………………………………………..37
7.3 Sound and Vibration Measurements………………………………………………38
8 Dimensions……………………………………………………………………….39
Blank Page…………………………………………………………………………40
Address_Page_WN-updated.pdf…………………………………………………………. 0
3.6 Roll Over Protection Structure (ROPS) 29………………………………………. 0
3.7 Foldable Roll Over Protection Structure (ROPS) (if equipped) 30………………….. 0
3.8 Rotating Beacon (if equipped) 31……………………………………………… 0
3.9 Backup Alarm (if equipped) 31………………………………………………… 0
3.10 Lighting Equipment (if equipped) 32………………………………………….. 0
3.11 Seat Belt 32………………………………………………………………. 0
3.12 Operator Presence System 33…………………………………………………. 0
3.13 Scraper Bars 34……………………………………………………………. 0
3.14 Anti-Vandalism Protection and Machine Access 35……………………………….. 0
3.15 Articulation Joint Lockarm 36……………………………………………….. 0
3.17 Operation on Slopes 38……………………………………………………… 0
3.19 Starting 40……………………………………………………………….. 0
3.20 Stopping/Parking 42………………………………………………………… 0
3.22 Parking Brake 44…………………………………………………………… 0
3.23 Parking Brake Adjustment 45…………………………………………………. 0
3.24 Direction and Speed 46……………………………………………………… 0
3.25 Transmission 47……………………………………………………………. 0
3.26 Vibration 48………………………………………………………………. 0
3.27 Water Spray System 49………………………………………………………. 0
3.28 Auxiliary Battery Positive Terminal 50……………………………………….. 0
3.29 Panel Indicator Lights 51…………………………………………………… 0
3.30 Adding Ballast to Rear Drum 52………………………………………………. 0
4.2 Honda Engine Maintenance Schedule 53………………………………………….. 0
4.3 Wacker Neuson Engine Maintenance Schedule 54…………………………………… 0
4.4 Roller Maintenance Schedule 55……………………………………………….. 0
4.5 Rear Frame Access 56………………………………………………………… 0
4.6 Battery 57…………………………………………………………………. 0
4.7 Fuel Filter 59……………………………………………………………… 0
4.8 Engine Oil and Filter 60…………………………………………………….. 0
4.9 Spark Plug 61………………………………………………………………. 0
4.10 Honda Engine Air Cleaner 62…………………………………………………. 0
4.11 Wacker Neuson Engine Air Cleaner 63………………………………………….. 0
4.12 Grease Fittings 64…………………………………………………………. 0
4.13 Hydraulic System Cleanliness 65……………………………………………… 0
4.14 Hydraulic Oil Requirements 66……………………………………………….. 0
4.15 Hydraulic Oil Level 67……………………………………………………… 0
4.16 Hydraulic Suction Strainer 67……………………………………………….. 0
4.17 Changing the Hydraulic Oil & Filter 68……………………………………….. 0
4.21 Storage 72………………………………………………………………… 0
4.22 Towing Bypass Valve 73……………………………………………………… 0
4.23 Towing 74…………………………………………………………………. 0
4.24 Troubleshooting 76…………………………………………………………. 0
5 Schematics 77………………………………………………………………… 0
5.1 Hydraulic Schematic 77…………………………………………………… 0
5.2 Hydraulic Schematic Components 78…………………………………………. 0
5.3 Electrical Schematic Identification-RD 12A 78………………………………. 0
5.4 Electrical Schematic “A”-RD 12A 79………………………………………… 0
5.5 Electrical Schematic “A” Components-RD 12A 80………………………………. 0
5.6 Electrical Schematic “B”-RD 12A 81………………………………………… 0
5.7 Electrical Schematic “B” Components-RD 12A 82………………………………. 0
5.8 Electrical Schematic-RD 12 83…………………………………………….. 0
5.9 Electrical Schematic Components-RD 12 84…………………………………… 0
6 Technical Data 85…………………………………………………………….. 0
6.1 Engine 85………………………………………………………………. 0
6.2 Roller 86………………………………………………………………. 0
6.3 Lubrication 86………………………………………………………….. 0
6.4 Dimensions 87…………………………………………………………… 0
6.5 Sound Measurements 88……………………………………………………. 0
6.6 Measurements of Operator Exposure to Vibration 88…………………………… 0
6.7 Hydraulic Pressures 89…………………………………………………… 0
1 Safety Information……………………………………………………………. 0
1.1 Signal Words Used in this Manual………………………………………….. 0
1.2 Machine Description and Intended Use………………………………………. 0
1.3 Safety Guidelines for Operating the Machine………………………………… 0
1.4 Operator Safety while Using Internal Combustion Engines……………………… 0
1.5 Service Safety………………………………………………………….. 0
2 Labels………………………………………………………………………. 0
2.1 Label Locations…………………………………………………………. 0
2.2 Label Meanings………………………………………………………….. 0
3 Operation……………………………………………………………………. 0
3.1 Features and Controls……………………………………………………. 0
3.2 Control Panel…………………………………………………………… 0
3.3 Preparing the Machine for First Use……………………………………….. 0
3.4 Position of the Operator…………………………………………………. 0
3.5 Recommended Fuel………………………………………………………… 0
3.6 Roll Over Protection Structure (ROPS)……………………………………… 0
3.7 Foldable Roll Over Protection Structure (ROPS) (if equipped)…………………. 0
3.8 Rotating Beacon (if equipped)…………………………………………….. 0
3.9 Backup Alarm (if equipped)……………………………………………….. 0
3.10 Lighting Equipment (if equipped)…………………………………………. 0
3.11 Seat Belt……………………………………………………………… 0
3.12 Operator Presence System………………………………………………… 0
3.13 Scraper Bars…………………………………………………………… 0
3.14 Anti-Vandalism Protection and Machine Access………………………………. 0
3.15 Articulation Joint Lockarm………………………………………………. 0
3.16 Machine Stability………………………………………………………. 0
3.17 Operation on Slopes…………………………………………………….. 0
3.18 Before Starting………………………………………………………… 0
3.19 Starting………………………………………………………………. 0
3.20 Stopping/Parking……………………………………………………….. 0
3.21 Emergency Shutdown Procedure…………………………………………….. 0
3.22 Parking Brake………………………………………………………….. 0
3.23 Parking Brake Adjustment………………………………………………… 0
3.24 Direction and Speed…………………………………………………….. 0
3.25 Transmission…………………………………………………………… 0
3.26 Vibration……………………………………………………………… 0
3.27 Water Spray System……………………………………………………… 0
3.28 Auxiliary Battery Positive Terminal………………………………………. 0
3.29 Panel Indicator Lights………………………………………………….. 0
3.30 Adding Ballast to Rear Drum……………………………………………… 0
4 Maintenance………………………………………………………………….. 0
4.1 Maintaining the Emission Control System……………………………………. 0
4.2 Honda Engine Maintenance Schedule…………………………………………. 0
4.3 Wacker Neuson Engine Maintenance Schedule………………………………….. 0
4.4 Roller Maintenance Schedule………………………………………………. 0
4.5 Rear Frame Access……………………………………………………….. 0
4.6 Battery………………………………………………………………… 0
4.7 Fuel Filter…………………………………………………………….. 0
4.8 Engine Oil and Filter……………………………………………………. 0
4.9 Spark Plug……………………………………………………………… 0
4.10 Honda Engine Air Cleaner………………………………………………… 0
4.11 Wacker Neuson Engine Air Cleaner…………………………………………. 0
4.12 Grease Fittings………………………………………………………… 0
4.13 Hydraulic System Cleanliness…………………………………………….. 0
4.14 Hydraulic Oil Requirements………………………………………………. 0
4.15 Hydraulic Oil Level…………………………………………………….. 0
4.16 Hydraulic Suction Strainer………………………………………………. 0
4.17 Changing the Hydraulic Oil & Filter………………………………………. 0
4.18 Bleeding the Hydraulic System……………………………………………. 0
4.19 Lifting the Machine…………………………………………………….. 0
4.20 Tying Down and Transporting the Machine…………………………………… 0
4.21 Storage……………………………………………………………….. 0
4.22 Towing Bypass Valve…………………………………………………….. 0
4.23 Towing………………………………………………………………… 0
4.24 Troubleshooting………………………………………………………… 0
5 Schematics…………………………………………………………………… 0
5.1 Hydraulic Schematic……………………………………………………… 0
5.2 Hydraulic Schematic Components……………………………………………. 0
5.3 Electrical Schematic Identification-RD 12A…………………………………. 0
5.4 Electrical Schematic “A”-RD 12A…………………………………………… 0
5.5 Electrical Schematic “A” Components-RD 12A…………………………………. 0
5.6 Electrical Schematic “B”-RD 12A…………………………………………… 0
5.7 Electrical Schematic “B” Components-RD 12A…………………………………. 0
5.8 Electrical Schematic-RD 12……………………………………………….. 0
5.9 Electrical Schematic Components-RD 12……………………………………… 0
6 Technical Data……………………………………………………………….. 0
6.1 Engine…………………………………………………………………. 0
6.2 Roller…………………………………………………………………. 0
6.3 Lubrication…………………………………………………………….. 0
6.4 Dimensions……………………………………………………………… 0
6.5 Sound Measurements………………………………………………………. 0
6.6 Measurements of Operator Exposure to Vibration……………………………… 0
6.7 Hydraulic Pressures……………………………………………………… 0
7 Emission Control Systems Information and Warranty………………………………… 0
7.1 Emission Control System Background Information……………………………… 0
7.2 Limited Defect Warranty for Exhaust Emission Control System………………….. 0
7.3 Limited Defect Warranty for Wacker Neuson Evaporative Emission Control Systems…. 0
PLEASE NOTE:
- This is the SAME exact manual used by your dealers to fix your vehicle.
- The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
- Any queries / doubts regarding your purchase, please feel free to contact [email protected]
S.V