Snorkel S1930E S1932E S2632E Operator Manual – PDF DOWNLOAD

Language : English
Pages : 26
Downloadable : Yes
File Type : PDF

Table of Contents
EC Declaration of Conformity. Safety Rules. Introduction
Component Identification
Special Limitations
Platform Capacity
Manual Force
Drive/Lift Pothole Protector Interlock. Drive/Lift Level Sensor Interlock Lowering Alarm
Lowering Interrupt Overload Protection Beaufort Scale
Controls and Indicators Battery Disconnect Switch. Lower Controls
Emergency Stop Button Control Selector Switch. Ground Operation Switch Platform Raise/Lower Switch.
Upper Controls Emergency Stop Button Drive/Lift Selector Switch, Joystick
Interlock Switch
Steer Switch,
Drive Range Switch-S2632E Only
Hom Button
Battery Condition Indicator. Pre-Operation Safety Inspection System Function Inspection
Operation
Preparing for Operation
Lower Controls
Upper Controls
Platform
Raising and Lowerin
Lowering Interrupt
Overload Protection
Extending
Driving and Steering
Drive Range Switch-S2632E
Drive Speeds
Drive/Lift Level Sensor Interlock
Fold Down Guardrais
Swing-Out Trays
Emergency Lowering
Inspection and Maintenance Schedule Daily Preventative Maintenance Checklist Preventative Maintenance Report.. Specifications-$1930E.
Aerial Platform Platform
Function Speed
Drive System
Drive/Lift Level Sensor Interlock
Tires.
Electrical System
Hydraulic System
Ambient Air Temperature Operating Range
Maximum Wind Speed
Vibration
Sound Pressure Level
Group Classification
General Specifications-S1932E
Aerial Platform. Platform
Function Speed
Drive System
Drive/Lift Level Sensor Interio Tires
Electrical System
Hydraulic System
Ambient Air Temperature Operating Range Maximum Wind Speed. Vibration—
Sound Pressure Level
Group Classification
General Specifications-S2632E
Aerial Platform
Platform
Function Speed
Drive System
Drive/Lift Level Sensor Interk
Tires
Electrical System
Hydraulic System
Ambient Air Temperature Operating Range Maximum Wind Speed..
Vibration
Sound Pressure Level
Group Classification
Transporting the Machine.
Preparing for Transportatio
Transporting
Lifting With a Forkill
Winching
Driving
Hoisting.
Storage
Maintenance
Hydraulic Fluid
Check Hydraulic Fluid
Battery Maintenance
Battery Charging

1. Open the trays and inspect for damage, fluid leaks or missing parts.
2. Check the level of the hydraulic fluid with the platform fully lowered. The fluid level must be between the full and add marks. Add recommended hydraulic fluid if necessary. See “Specifications” on pages 20-22.
3. Check that the fluid level in the batteries is correct. See “Battery Maintenance” on page 17.
4. Verify that the batteries are charged.
5. Check that the AC extension cord has been disconnected from the outlet on the side of the chassis.
6. Check that all guardrails are in place and all fasteners are properly tightened.
7. Inspect the machine thoroughly for cracked welds and structural damage, loose or missing hardware, hydraulic leaks, damaged control cable and loose wire connections.