Mitsubishi Forklift FD100NM1 FD100NM1S FD120NM1 FD120NM1S FD135NM1 FD135NM1S FD150ANM1 FD150ANM1S Service Manual – PDF DOWNLOAD
FILE DETAILS:
Mitsubishi Forklift FD100NM1 FD100NM1S FD120NM1 FD120NM1S FD135NM1 FD135NM1S FD150ANM1 FD150ANM1S Service Manual – PDF DOWNLOAD
Format: PDF
Language: English
Brand: Mitsubishi
DESCRIPTION:
Mitsubishi Forklift FD100NM1 FD100NM1S FD120NM1 FD120NM1S FD135NM1 FD135NM1S FD150ANM1 FD150ANM1S Chassis Mast Service Manual – PDF DOWNLOAD
For use with 6D16-TL Diesel Engine Service Manual
Serial No : 99799-21110
FD100NM1 F15E-90011-99999
FD100NM1S F15E-90011-99999
FD120NM1 F15E-90011-99999
FD120NM1S F15E-90011-99999
FD135NM1 F15E-90011-99999
FD135NM1S F15E-90011-99999
FD150ANM1 F24C-20011-39999
FD150ANM1S F24C-20011-39999
FOREWORD :
- This service manual is a guide for servicing Mitsubishi forklift trucks. The long productive life of your forklift truck(s) depends on regular and proper servicing consistent with what you will learn by reading this service manual. Read the respective sections of this manual carefully and familiarize yourself with all of the components before attempting to start a test, repair, or rebuild the forklift truck.
- The descriptions, illustrations, and specifications contained in this manual are for forklift trucks with serial numbers in effect at the time of printing. Mitsubishi Forklift Trucks reserves the right to change specifications or designs without notice and without incurring obligations. For your convenience the instructions are grouped by systems as an easy reference.
SAFETY:
- The proper safe lubrication and maintenance for these forklift trucks, recommended by Mitsubishi Forklift Trucks, are outlined in the SERVICE MANUAL. Read and understand the SERVICE MANUAL before performing any lubrication or maintenance on these forklift trucks. Improper performance of lubrication or maintenance procedures is dangerous and could result in injury or death.
- The serviceman or mechanic may be unfamiliar with many of the systems on this forklift truck. This makes it important to use caution when performing service work. – DO NOT operate these forklift trucks unless you have read and understood the instructions in the SERVICE MANUAL. Improper forklift truck operation is dangerous and could result in injury or death. A knowledge of the system and/or components is important before the removal or disassembly of any component. Because of the size of some of the forklift truck components, the serviceman or mechanic should check the weights noted in this manual. Use proper lifting procedures when removing any components. The following is a list of basic precautions that should always be observed:
TABLE OF CONTENTS:
Mitsubishi Forklift FD100NM1 FD100NM1S FD120NM1 FD120NM1S FD135NM1 FD135NM1S FD150ANM1 FD150ANM1S Service Manual – PDF DOWNLOAD
Chapter 1 GENERAL INFORMATION
1 Model View1-1
2 Applicable Forklift Truck Models1-1
3 Serial Number Locations 1-2
4 Specifications 1-3
41 Dimensions 1-4
42 Performance 1-5
Chapter 2 COOLING SYSTEM
1 Specifications 2-1
2 Structure 2-2
3 Removing Radiator and Intercooler2-3
31 Preparation 2-3
32 Removal Sequence of Radiator and Intercooler 2-3
33 Suggestions for Removal2-4
4 Inspecting and Adjusting Radiator and Intercooler 2-5
41 Intercooler 2-5
42 Inspecting Fan Belt 2-5
43 Radiator 2-5
44 Antifreeze and Cooling Water2-6
5 Installing Cooling System 2-7
51 Suggestions for Installation 2-7
6 Troubleshooting 2-10
7 Service Data 2-11
71 Fan Belt 2-11
72 Radiator 2-11
73 Intercooler 2-12
74 Oil Cooler2-13
Chapter 3 ELECTRICAL SYSTEM
1 Chassis Electrical Components and Wiring Outline 3-1
11 Electrical Components and Wiring Diagram of Each System 3-2
2 Console Box 3-12
21 Outline of Console Box 3-12
22 Removing Meter Panel 3-12
23 Installing Meter Panel3-13
3 Main Electrical Components3-14
31 Meter Panel 3-14
32 Select Switch3-15
33 Brake Warning Icon 3-16
34 Key Switch (Anti-Restart Switch) 3-17
35 Light Switch and Turn Signal Switch 3-18
36 Direction (FNR) Switch 3-20
37 Horn 3-21
TABLE OF CONTENTS
TOC-2
38 Fuel Tank Unit3-22
39 Stop Light Switch 3-22
310 Thermo Switch (T/C Oil) 3-23
311 Speed Sensor3-24
312 Fuse Box 3-25
313 Relay Box3-26
314 Glow Relay 3-28
315 Engine Stop Timer3-28
316 Low Air Pressure Switch 3-29
317 List of Lights 3-30
4 Battery and Maintenance 3-31
41 Battery Specific Gravity Condition and Adjustment3-31
42 Relationship Between Electrolyte Specific Gravity and State of Charge 3-32
43 Precautions for Battery Charging 3-32
5 Meter panel3-33
51 Meter Panel Layout 3-33
52 Basic Display 3-35
53 Basic Operation 3-40
54 When a Warning Occurs 3-48
55 When Several Warnings Occur Simultaneously3-50
56 Warning Symbols 3-51
57 Warning Icons3-52
58 Optional Features3-53
59 Hour Meter 3-56
510 Troubleshooting 3-57
6 Wire Color 3-58
61 List of Wire Color Codes 3-58
7 Troubleshooting3-59
71 Engine Startup Problem 3-59
72 Gauge-Related Problems 3-59
73 Light-Related Problems 3-60
74 Warning Device Problems3-61
75 Battery-Related Problems 3-62
Chapter 4 CONTROLLERS
1 Outline 4-1
11 System Configuration4-1
12 Color Coding 4-3
13 Controller External View 4-4
2 Service Tool Functions 4-12
21 Menu Structure 4-12
22 Input Monitor and Output Monitor4-13
23 Truck Status 4-17
24 Truck History 4-18
3 Diagnostic Code List4-19
4 Troubleshooting4-20
41 General Precautions 4-20
42 VCM Memory Check Warning (F01) 4-22
TABLE OF CONTENTS
TOC-3
43 VCM Battery Voltage Warning (F02) 4-23
44 VCM Communication Warning (F03) 4-25
45 Meter Panel Communication Warning (F07) 4-27
46 Lift Lever Neutral Warning (F10) 4-28
47 Tilt Lever Neutral Warning (F11) 4-30
48 Attachment 1 Lever Neutral Warning (F12)4-32
49 Attachment 2 Lever Neutral Warning (F13)4-34
410 Attachment 3 Lever Neutral Warning (F14)4-36
411 Direction Lever Warning (F16)4-38
412 Vehicle Speed Warning (F17) 4-39
413 Lift Lever Warning (F20) 4-40
414 Tilt Lever Warning (F22) 4-42
415 Attachment 1 Lever Warning (F24)4-44
416 Attachment 2 Lever Warning (F26)4-46
417 Attachment 3 Lever Warning (F28)4-48
418 Joystick Duplicate Warning (F29) 4-50
419 Vehicle Speed Sensor Warning (F34) 4-52
420 Output Unit Warning (F41) 4-53
421 Output Unit Supply Voltage Warning (F44)4-54
422 Output Unit Communication Warning (F45) 4-56
423 Input Unit Warning (F46) 4-58
424 Input Unit Communication Warning (F49) 4-59
425 Lift up Solenoid Warning (F50)4-61
426 Lift Down Solenoid Warning (F52)4-63
427 Lift Solenoid Leak (F54) 4-65
428 Tilt Forward Solenoid Warning (F55) 4-68
429 Tilt Backward Solenoid Warning (F57) 4-70
430 Tilt Solenoid Leak (F59) 4-72
431 Attachment 1A Solenoid Warning (F60) 4-75
432 Attachment 1B Solenoid Warning (F62) 4-77
433 Attachment 1 Solenoid Leak (F64)4-79
434 Attachment 2A Solenoid Warning (F65) 4-82
435 Attachment 2B Solenoid Warning (F67) 4-84
436 Attachment 2 Solenoid Leak (F69)4-86
437 Attachment 3A Solenoid Warning (F70) 4-89
438 Attachment 3B Solenoid Warning (F72) 4-91
439 Hour Meter Gap Warning (F73) 4-93
440 Attachment 3 Solenoid Leak (F74)4-94
441 Unload Solenoid Warning (F75) 4-97
442 Unload Solenoid Leak (F79) 4-99
443 Transmission Forward Solenoid Warning (F85)4-101
444 Transmission Reverse Solenoid Warning (F87) 4-103
445 Transmission Solenoid Leak (F89) 4-105
446 VCM Speed Change Solenoid 1 Warning (F93) 4-107
447 VCM Setting Warning (F96) 4-109
Chapter 5 POWER TRAIN
1 Specifications 5-1
2 Structure 5-2
TABLE OF CONTENTS
TOC-4
3 Reduction Ratio 5-3
4 Removing and Installing Engine and Transmission Unit 5-4
41 Preparation 5-4
42 Removing Overhead Guard, Covers, and Air Cleaner Element 5-5
43 Removing Harnesses 5-6
44 Disconnecting Pipes and Hoses 5-7
45 Preparation for Removing Engine and Transmission Unit 5-8
46 Removing Engine and Transmission Unit 5-9
5 Installing Engine and Transmission Unit 5-10
51 Suggestions for Installation 5-10
52 Capacity and Brand of Oils and Cooling Water 5-12
Chapter 6 3-SPEED POWERSHIFT TRANSMISSION
1 Specifications 6-1
2 Structure 6-2
21 Torque Converter6-2
22 Transmission 6-3
23 Power Flow – Forward6-4
24 Power Flow – Reverse 6-5
25 Control Valve 6-6
26 Main Regulator Valve 6-6
27 3 Speed Transmission Hydraulic Lines 6-7
28 Automatic 3 Speed Shift Mechanism 6-9
29 Torque Converter Drive Control 6-10
3 Removing Transmission 6-11
31 Removing Torque Converter 6-11
4 Installing Transmission 6-12
5 Disassembling Torque Converter6-13
51 Disassembly Sequence 6-13
52 Suggestions for Disassembly 6-13
6 Inspecting and Repairing Torque Converter 6-14
7 Assembling Torque Converter 6-17
71 Assembly Sequence 6-17
72 Suggestions for Assembling Torque Converter6-18
8 Disassembling Transmission6-19
81 Disassembly Sequence of Control Valve and External Parts 6-19
82 Disassembling Transmission Cover and Output, 1st/3rd Clutch,
Forward Clutch, Reverse Clutch, and Input Shafts 6-20
83 Suggestions for Disassembling Transmission 6-21
84 Disassembly Sequence of Stator Shaft and Oil Pump 6-23
85 Suggestions for Disassembling Oil Pump 6-24
86 Disassembly Sequence of Forward Clutch Shaft Assembly 6-26
87 Suggestions for Disassembling Forward Clutch Shaft Assembly6-27
88 Disassembly Sequence of 1st/3rd Speed Clutch Shaft Assembly6-28
89 Suggestions for Disassembling 1st/3rd Clutch Shaft Assembly 6-28
810 Disassembly Sequence of Reverse Clutch Shaft Assembly 6-29
811 Suggestions for Disassembling Reverse Clutch Shaft Assembly 6-29
TABLE OF CONTENTS
TOC-5
9 Inspecting and Repairing Transmission 6-30
10 Assembling Transmission 6-33
101 Assembly Sequence of Forward Clutch Assembly
(1st/3rd Clutch Shaft Assembly) (Reverse Clutch Shaft Assembly) 6-33
102 Suggestions for Assembling Forward Clutch Assembly
(1st/3rd Clutch Shaft Assembly) (Reverse Clutch Shaft Assembly) 6-34
103 Assembly Sequence of Stator Shaft and Oil Pump 6-35
104 Suggestions for Assembling Stator Shaft and Oil Pump6-36
105 Assembly Sequence of Input Shaft, Forward Clutch, 1st/3rd Speed Clutch,
Reverse Clutch, Output Shafts, and Transmission Cover 6-37
106 Suggestions for Assembling Input Shaft, Forward Clutch, 1st/3rd
Speed Clutch, Reverse Clutch, Output Shafts, and Transmission Cover 6-38
107 Assembly Sequence of Control Valve and External Parts 6-40
11 Disassembling Control Valve 6-41
111 Disassembly Sequence 6-41
12 Inspecting and Repairing Control Valve 6-42
13 Assembling Control Valve 6-43
131 Preparation 6-43
132 Assembly Sequence 6-43
133 Suggestions for Assembling Control Valve6-43
14 Disassembling Main Regulator Valve6-44
141 Disassembly Sequence 6-44
15 Inspecting and Repairing Main Regulator Valve 6-44
16 Assembling Main Regulator Valve 6-44
161 Suggestions for Assembly6-44
17 Adjustment6-45
171 Adjusting Brake Pedal and Inching Pedal 6-45
172 Checking Oil Pressure6-47
173 Measurement 6-50
174 10 m Start Acceleration Test 6-50
175 Testing Automatic 3 Speed Transmission Functions 6-51
18 Troubleshooting 6-52
19 Service Data 6-57
191 Stall Speed and Oil Pressure 6-57
192 Pump Boss 6-57
193 Pilot Boss6-58
194 Oil Pump6-58
195 Stator6-59
196 Flexible Plate6-60
197 Clutches 6-61
198 Input Shaft, Forward, Reverse, and 1st/ 3rd Speed Clutch Shafts,
and Servo Case 6-62
199 Backlash of Gears6-63
1910 Control Valve6-64
1911 Main Regulator Valve 6-65
1912 Inching Pedal Control6-65
TABLE OF CONTENTS
TOC-6
Chapter 7 FRONT AXLE AND REDUCTION DIFFERENTIAL
1 Specifications 7-1
2 Structure 7-2
21 General Description 7-2
22 Reduction Differential7-3
3 Removing Front Wheels 7-4
31 Preparation 7-4
32 Removal Sequence 7-4
33 Suggestions for Removal 7-5
4 Installing Front Wheels 7-8
41 Suggestions for Installation 7-8
5 Removing Front Axle and Reduction Differential 7-9
51 Preparation 7-9
52 Removal Sequence 7-10
53 Suggestions for Removal 7-11
6 Installing Front Axle and Reduction Differential 7-12
61 Suggestions for Installation 7-12
7 Removing Reduction Differential7-13
71 Preparation 7-13
72 Removal Sequence 7-13
73 Suggestions for Removal 7-13
8 Installing Reduction Differential 7-14
81 Suggestions for Installation 7-14
9 Disassembling Hub Reduction 7-15
91 Preparation (On-Truck Condition) 7-15
92 Disassembly Sequence of Hub Reduction 7-15
93 Suggestions for Disassembling Hub Reduction7-16
94 Disassembly Sequence of Wheel Brake7-17
95 Suggestions for Disassembling Wheel Brake 7-17
10 Inspecting and Repairing Hub Reduction7-18
101 Assembly Sequence of Wheel Brake 7-20
102 Suggestions for Assembling Wheel Brake 7-20
103 Assembly Sequence of Hub Reduction7-21
104 Suggestions for Assembling Hub Reduction 7-22
11 Disassembling Reduction Differential 7-24
111 Preparation 7-24
112 Disassembly Sequence of Differential Gear Assembly 7-25
113 Suggestions for Disassembling Differential Gear Assembly 7-25
114 Disassembly Sequence of Reduction and Parking Brake Assembly 7-26
115 Suggestions for Disassembling Reduction and Parking Brake Assembly 7-26
116 Inspecting and Repairing Reduction and Parking Brake Assembly 7-27
12 Assembling Reduction Differential 7-29
121 Assembly Sequence of Differential Gear Assembly 7-29
122 Suggestions for Assembling Differential Gear Assembly 7-30
123 Adjusting Preload of Reduction Pinion7-32
124 Adjusting the Contact Between Gear and Pinion Teeth7-34
125 Assembly Sequence of Reduction and Parking Brake Assembly7-38
TABLE OF CONTENTS
TOC-7
126 Assembling Reduction and Parking Brake Assembly 7-39
127 Assembly Sequence of Reduction Differential 7-40
128 Suggestions for Assembling Reduction Differential7-40
13 Troubleshooting 7-41
14 Service Data 7-42
141 Front Axle 7-42
142 Reduction Differential7-45
Chapter 8 REAR AXLE
1 Specifications 8-1
2 Structure 8-2
21 Rear Axle8-2
22 Power Steering Cylinder 8-3
3 Removing Rear Wheel 8-4
31 Preparation 8-4
32 Removal Sequence 8-5
33 Suggestions for Removal 8-6
4 Installing Rear Wheel 8-6
41 Suggestions for Installation 8-6
5 Removing Rear Axle 8-7
51 Preparation 8-7
52 Removal Sequence 8-7
6 Installing Rear Axle 8-9
61 Suggestions for Installation 8-9
7 Disassembling Rear Axle Assembly 8-10
71 Disassembly Sequence 8-10
72 Suggestions for Removal 8-11
8 Assembling Rear Axle 8-13
81 Assembly Sequence 8-13
9 Disassembling Power Steering Cylinder8-18
91 Disassembly Sequence 8-18
92 Suggestions for Disassembly 8-19
10 Inspecting and Adjusting Power Steering Cylinder 8-20
11 Assembling Power Steering Cylinder 8-21
111 Assembly Sequence 8-21
112 Suggestions for Assembly8-21
12 Adjustment8-23
121 Measuring Minimum Turning Radius 8-23
13 Troubleshooting 8-25
14 Service Data 8-26
141 Rear Axle8-26
142 Power Steering Cylinder 8-27
TABLE OF CONTENTS
TOC-8
Chapter 9 BRAKE SYSTEM
1 Specifications 9-1
11 Dry Brake System 9-1
2 Structure 9-2
21 Outline of Wheel Brake System 9-2
22 Air Governor 9-3
23 Air Dryer 9-4
24 Relay Valve 9-7
25 Brake Control Valve 9-9
26 Air Master 9-10
27 Wheel Brake 9-13
28 Parking Brake System 9-14
29 Parking Brake Lever 9-15
210 Parking Brake9-16
3 Removing Wheel Brake 9-17
31 Preparation 9-17
32 Removal Sequence 9-17
33 Suggestions for Removal 9-18
4 Installing Wheel Brake 9-20
41 Suggestions for Installation 9-20
5 Disassembling Wheel Brake 9-21
51 Disassembly Sequence 9-21
52 Suggestions for Disassembly 9-22
6 Inspecting and Repairing Wheel Brake 9-23
7 Assembling Wheel Brake9-24
71 Assembly Sequence 9-24
72 Suggestions for Assembly9-25
8 Disassembling Wheel Cylinder 9-27
81 Disassembly Sequence 9-27
9 Inspecting and Repairing Wheel Cylinder9-28
10 Disassembling Air Governor9-29
101 Disassembly Sequence 9-29
11 Assembling Air Governor 9-29
12 Assembling Wheel Cylinder 9-29
121 Suggestions for Assembly9-29
13 Disassembling Air Master 9-30
131 Disassembly Sequence 9-30
132 Suggestions for Disassembly 9-30
14 Assembling Air Master 9-31
141 Suggestions for Assembly9-31
15 Disassembling Parking Brake9-32
151 Disassembly Sequence 9-32
16 Inspecting and Repairing Parking Brake 9-33
17 Assembling Parking Brake 9-33
171 Suggestions for Assembly9-33
TABLE OF CONTENTS
TOC-9
18 Disassembling Brake Control Valve 9-34
181 Disassembly Sequence 9-34
19 Assembling Brake Control Valve9-35
191 Suggestions for Assembly9-35
20 Disassembling Air Dryer 9-36
201 Disassembly Sequence 9-36
21 Inspecting and Repairing Air Dryer 9-37
211 Scheduled Inspection of Air Dryer9-37
22 Assembling Air Dryer 9-38
221 Suggestions for Assembly9-38
23 Adjusting and Testing Actuation9-40
231 Inspecting Wheel Brake 9-40
232 Bleeding Brake System 9-41
233 Bleeding Brake Pedal 9-41
234 Inspecting Brake Control Valve 9-42
235 Adjusting Parking Brake 9-43
24 Troubleshooting 9-44
241 Wheel Brake 9-44
242 Parking Brake9-45
243 Air Dryer 9-45
25 Service Data 9-46
251 Brake Pedal 9-46
252 Brake Control Valve 9-46
253 Air Master 9-47
254 Wheel Brake 9-49
255 Wheel Cylinder 9-50
256 Parking Brake Lever 9-51
257 Parking Brake Drum 9-52
258 Air Dryer9-53
Chapter 10 STEERING SYSTEM
1 Specifications 10-1
2 Structure 10-1
21 Steering System 10-1
22 Steering Valve 10-3
23 Steering Column 10-5
3 Removing and Installing Steering Valve Piping 10-6
31 Main Components 10-6
32 Suggestions for Disassembly and Assembly 10-6
4 Removing and Installing Steering Wheel, Steering Valve,
and Tilt Lock Lever 10-7
41 Removing Steering Wheel10-8
42 Installing Steering Wheel 10-8
43 Inspecting Steering Wheel After Installation 10-9
44 Removing Steering Valve 10-9
45 Installing Steering Wheel 10-10
TABLE OF CONTENTS
TOC-10
46 Disassembling Tilt Lock Lever10-10
47 Assembling Tilt Lock Lever 10-11
5 Disassembling Steering Valve 10-12
51 Disassembly Sequence 10-12
52 Suggestions for Disassembling Steering Valve10-13
53 Inspecting Steering Valve after Disassembly 10-16
6 Assembling Steering Valve 10-17
61 Preparation 10-17
62 Assembly Sequence 10-17
63 Suggestions for Assembly10-18
7 Troubleshooting10-23
8 Service Data10-24
Chapter 11 HYDRAULIC SYSTEM
1 Specifications 11-1
2 Structure 11-2
21 Hydraulic Line11-2
22 Hydraulic Tank 11-3
23 Gear Pump 11-4
24 Priority Valve 11-5
25 Control Valve 11-6
26 Lift and Tilt Cylinders 11-8
27 Flow Regulator Valve 11-9
3 Removing Control Valve11-10
31 Preparation 11-10
32 Removal Sequence 11-10
33 Suggestions for Removal 11-11
4 Removing Lift Cylinders 11-12
41 Suggestions for Removal 11-13
5 Installing Lift Cylinders 11-13
51 Suggestions for Installation 11-13
6 Removing Tilt Cylinders 11-14
61 Preparation 11-14
62 Removal Sequence 11-14
63 Suggestions for Removal 11-15
7 Removing Gear Pump 11-16
8 Disassembling Gear Pump 11-17
81 Preparation 11-17
82 Disassembly Sequence 11-17
83 Suggestions for Disassembly 11-18
9 Inspecting and Repairing Gear Pump 11-19
10 Assembling Gear Pump11-21
101 Preparation 11-21
102 Suggestions for Assembly11-21
11 Installing Gear Pump 11-22
TABLE OF CONTENTS
TOC-11
12 Disassembling Priority Valve11-23
121 Disassembly Sequence 11-23
122 Suggestions for Disassembly 11-23
13 Assembling Priority Valve 11-23
131 Suggestions for Assembly11-23
14 Disassembling and Assembling Control Valve 11-24
141 Disassembly Sequence 11-24
142 Assembly Sequence 11-24
143 Suggestions for Assembly11-24
144 Disassembling Inlet Valve Assembly 11-25
145 Cleaning and Inspecting Inlet Valve Assembly 11-30
146 Assembling Inlet Valve Assembly 11-30
147 Disassembling and Assembling Tilt Valve Assembly 11-34
148 Cleaning and Inspecting Tilt Valve Assembly 11-36
149 Assembling Tilt Valve Assembly 11-36
1410 Disassembling and Assembling Attachment Valve Assembly 11-38
1411 Cleaning and Inspecting Attachment Valve Assembly 11-40
1412 Assembling Attachment Valve Assembly 11-40
15 Disassembling Flow Regulator Valve11-42
151 Disassembly Sequence 11-42
16 Inspecting and Repairing Flow Regulator Valve 11-42
17 Assembling Flow Regulator Valve 11-42
18 Disassembling Lift Cylinder 11-43
181 Disassembly Sequence 11-43
182 Suggestions for Disassembly 11-44
19 Inspecting Lift Cylinder 11-45
20 Assembling Lift Cylinders 11-47
201 Assembly Sequence 11-47
202 Suggestions for Assembly11-47
21 Disassembling Tilt Cylinder 11-49
211 Disassembly Sequence 11-49
212 Suggestions for Disassembly 11-50
22 Inspecting and Repairing Tilt Cylinder 11-50
23 Assembling Tilt Cylinder11-52
231 Assembly Sequence 11-52
232 Suggestions for Assembly11-52
24 Inspecting and Adjusting Hydraulic System 11-53
241 Hydraulic Oil 11-53
242 Test Operation of Gear Pump 11-53
243 Control Valve11-54
244 Adjusting Main Relief Valve 11-55
245 Checking Priority Valve Function 11-56
25 Drift Test 11-57
251 Loaded Drift Test 11-57
252 Tilt Drift Test 11-57
26 Troubleshooting 11-58
TABLE OF CONTENTS
TOC-12
27 Service Data11-61
271 Gear Pump 11-61
272 Control Valve 11-62
273 Priority Valve 11-63
274 Hydraulic Tank 11-64
275 Flow Regulator Valve 11-65
276 Lift Cylinder 11-66
277 Tilt Cylinder 11-67
Chapter 12 MAST AND FORKS
1 Specifications 12-1
11 Mast 12-1
12 Forks 12-1
2 Structure 12-2
3 Removing Mast and Lift Bracket12-3
31 Removal Sequence 12-3
32 Suggestions for Removal 12-4
4 Disassembling Mast Assembly 12-6
41 Disassembly Sequence 12-6
42 Suggestions for Disassembly 12-7
5 Inspecting and Repairing Mast Assembly12-8
6 Assembling Mast Assembly 12-10
61 Suggestions for Assembly12-10
7 Adjusting Mast Assembly 12-15
8 Troubleshooting12-19
9 Service Data12-20
Chapter 13 SIDE SHIFTER
1 Applicable Attachment Models 13-1
2 Specifications 13-2
21 Applicable Forks 13-2
3 Structure 13-3
31 Side Shifter 13-3
32 Side Shifter With Fork Positioner 13-5
4 Removing Main Roller and Side Roller From Lift Bracket 13-7
41 Removal Sequence 13-7
5 Adjusting Lift Bracket Clearance 13-8
6 Installing Main Roller and Side Roller13-8
61 Suggestions for Installation 13-8
7 Disassembling Side Shifter (With Fork Positioner) Cylinder 13-9
71 Disassembly Sequence 13-9
72 Suggestions for Disassembly 13-9
8 Assembling Side Shifter (With Fork Positioner) Cylinder 13-10
81 Assembly Sequence 13-10
TABLE OF CONTENTS
TOC-13
82 Suggestions for Assembly13-10
9 Inspecting and Adjusting Side Shifter Cylinder 13-10
10 Troubleshooting 13-11
Chapter 14 FORK POSITIONER
1 Applicable Attachment Models 14-1
2 Specifications 14-2
21 Fork Positioner 14-2
22 Applicable Fork Blades 14-2
3 Structure 14-3
4 Removing Fork Positioner 14-4
41 Preparation 14-4
42 Removal Sequence of Fork Positioner (Simultaneous Move Type) 14-4
43 Removal Sequence of Fork Positioner (Independent Move Type) 14-5
44 Suggestions for Removing Fork Positioner14-6
5 Inspecting and Repairing Fork Positioner 14-7
6 Installing Fork Positioner 14-7
61 Suggestions for Installation 14-7
7 Disassembling Fork Positioner Cylinder 14-9
71 Disassembly Sequence 14-9
72 Suggestions for Disassembly 14-10
8 Inspecting and Repairing Fork Positioner Cylinder 14-11
9 Assembling Fork Positioner Cylinder14-13
91 Assembly Sequence 14-13
92 Suggestions for Assembly14-13
10 Inspection and Adjustment After Assembling Fork Positioner14-14
11 Troubleshooting 14-15
12 Service Data 14-16
Chapter 15 SERVICE DATA
1 Maintenance Schedule 15-1
2 Tightening Torques for Standard Bolts and Nuts15-6
21 Metric Fine Thread 15-6
22 Metric Coarse Thread 15-8
3 Periodic Replacement Parts 15-10
31 Location of Periodic Replacement Parts 15-10
4 Lubrication Schedule 15-11
41 Lubrication Chart15-11
42 Fuel and Lubricant Specifications 15-12
43 Adjustment Value and Oil Capacity 15-13
5 Weight of Major Devices15-14
6 Special Tools 15-15
TABLE OF CONTENTS
TOC-14
Chapter 16 HOW TO READ CIRCUIT DIAGRAMS
1 Description of Circuit Diagrams 16-1
11 Circuit Diagrams 16-1
12 Connector Diagrams 16-1
2 How to Read Circuit Diagrams 16-2
21 Symbols 16-3
22 Sheet Symbol16-6
23 Connecting Lines 16-7
24 Equipment 16-8
25 Relay Contactor and Coil 16-9
26 Connectors 16-9
27 Indication of Connecting Line 16-10
28 Indication of GND (Earth) 16-10
29 Indication of Another Specification 16-11
3 How to Read Connector Diagrams 16-12
4 Abbreviation 16-14
Chapter 17 CIRCUIT DIAGRAM
VIDEO PREVIEW OF THE MANUAL:
IMAGES PREVIEW OF THE MANUAL:
PLEASE NOTE:
- This is not a physical manual but a digital manual – meaning no physical copy will be couriered to you. The manual can be yours in the next 2 mins as once you make the payment, you will be directed to the download page IMMEDIATELY.
- This is the same manual used by the dealers inorder to diagnose your vehicle of its faults.
- Require some other service manual or have any queries: please WRITE to us at [email protected]