Linkbelt 210-240LX EXCAVATOR OPERATOR’S MANUAL 1014 – PDF DOWNLOAD
DESCRIPTION:
Linkbelt 210-240LX EXCAVATOR OPERATOR’S MANUAL 1014 – PDF DOWNLOAD
TO THE OWNER:
- Your machine has been designed and built to the highest standards of quality. It
conforms to all current safety regulations. . However, the risk of accidents can
never be completely excluded. That is why it is essential to observe elementary
safety rules and precautions. Hazard control and accident prevention are
dependent upon the awareness, concern and prudence of the operator. - Personnel involved in the operation, transport, maintenance and storage of
equipment must be suitably trained.
Read this manual carefully, paying particular attention to the instructions - concerning safety, operation and maintenance so as to avoid the risk of injury
while operating or servicing the machine. - Use this manual as a guide. Your machine will remain a reliable working tool
provided it is kept in good working condition and serviced properly. - The standard attachments and equipment available for use with this machine are
intended for general earthmoving purposes, material rehandling, ditch cleaning,
etc. If the machine is to be used for handling loads, ( concrete pipe sections,
shoring material, etc.), make sure the machine is suitably equipped for this type of
work. - Do not use this machine for any application or purpose other than those described
in this manual. If the machine is to be used for work involving the use of special
attachments, accessories or equipment, consult your authorized LBX Link-Belt
distributor in order to make sure that any adaptations or modifications made are in - keeping with the machine’s technical specifications and with prevailing safety
requirements. - Any modification or adaptation which is not approved by the manufacturer may
invalidate the machine’s initial conformity with safety requirements.
The machine must undergo regular inspections, the frequency of which varies
according to the type of use. Consult your authorized LBX Link-Belt distributor.
Before permitting a new operator on this machine, make sure:
1. That the operator has received the necessary training on how to operate the
machine correctly and safely or from an approved organization
2. That the operator has read and understood the instructions given in this
manual.
Always keep this manual in the operator’s compartment (in the seat back, behind
the operator’s seat). Make sure it is always complete and in good condition. If you
wish to obtain additional manuals, or manuals in another language, consult your
authorized LBX Link-Belt distributor.
Your authorized LBX Link-Belt distributor is at your disposal for any further
information. He will also provide any after-sales service you may require, and
genuine authorized LBX Link-Belt parts, and service, your guarantee of quality
and performance.
TABLE OF CONTENTS:
Linkbelt 210-240LX EXCAVATOR OPERATOR’S MANUAL 1014 – PDF DOWNLOAD
TO THE OWNER 1
RIGHT, LEFT,FRONT AND REAR OF MACHINE 3
IDENTIFICATION NUMBERS 5
TYPE, SERIAL NUMBER AND YEAR OF MANUFACTURE 5
MACHINE COMPONENTS 6
SAFETY RULES7
UTILITY SAFETY 8
PERSONAL SAFETY 9
BEFORE OPERATION 10
MACHINE OPERATION 11
BURN PREVENTION12
FIRE EXTINGUISHER 13
FIRE OR EXPLOSION PREVENTION 14
MAINTENANCE 15
MAINTENANCE AND ADJUSTMENTS 21
DECALS 23
HAND SIGNALS 34
INSTRUMENTS/CONTROLS39
CAB DOOR39
STEPS AND ACCESS HANDLES40
OPERATOR’S COMPARTMENT CONTROLS 42
LOCATION OF CONTROLS AND ASSOCIATED COMPONENTS 42
RIGHT-HAND CONTROL ARM 45
LEFT-HAND CONTROL ARM46
SYSTEMS DISPLAY AND CONTROL PANEL48-55
ANTI-THEFT SYSTEM56
ARM AND UPPERSTRUCTURE SWING 59
CONTROL LEVERS 59-62
OPERATOR’S SEAT 71
WINDSHIELD 74
LOWER FRONT WINDOW76
REAR WINDOW AND EMERGENCY EXIT 77
FUEL TANK 79
REAR VIEW MIRROR80
TOOL BOX80
SIDE DOORS 81
ENGINE HOOD 82
LOWER PANELS 83
WINDSHIELD WASHER RESERVOIR 83
LIFTING EYE 84
TOWING EYES85
II
OPERATING INSTRUCTIONS 89
BEFORE OPERATING THE MACHINE 89
MACHINE OPERATION 90
BREAK-IN PERIOD 92
VANDAL COVER 93
STARTING THE ENGINE 94
BRINGING THE MACHINE UP TO OPERATING TEMPERATURE 96
ENGINE OPERATION97
OPERATING THE MACHINE IN COLD WEATHER 98
STOPPING THE ENGINE99
MACHINE OPERATION 100
MACHINE TRAVEL 102
HANDLING THE MACHINE 105
LOAD HANDLING 105
OPERATING THE MACHINE IN WATER 107
OPERATING ON SLOPING GROUND 107
FILLING THE BUCKET 108
PARKING THE MACHINE 109
TOWING THE MACHINE110
LOWERING ATTACHMENT IN THE EVENT OF MACHINE FAILURE 111
AUXILIARY HYDRAULIC (optional) 112
TRANSPORTING THE MACHINE 117
LUBRICATION 123
BEFORE OPERATING THE MACHINE 123
FLUIDS AND LUBRICANTS 123
HOURMETER125
DAILY INSPECTION125
SERVICE INTERVALS 127
ENGINE OIL 129
FLUID AND LUBRICANT CAPACITIES AND SPECIFICATIONS 130
GREASE POINTS 131
GREASING THE TURNTABLE TEETH 134
GREASING THE SWING REDUCTION GEAR 134
FLUID LEVELS 135
ENGINE 137
COOLING SYSTEM 140
FUEL SYSTEM 143
RELEASING PRESSURE IN THE HYDRAULIC SYSTEM 145
HYDRAULIC SYSTEM 147
AIR FILTER 158
SWING REDUCTION GEAR162
TRAVEL REDUCTION GEARS 164
ADJUSTMENT/MAINTENANCE 167
TRACKS 167
TRACK ROLLERS AND IDLER WHEELS 171
III
RADIATOR AND OIL COOLER 172
FAN AND ALTERNATOR DRIVE BELT 173
FUEL TANK FILTER 175
INSPECTING AND CLEANING THE MACHINE175
CHECKING FOR CYLINDER LEAKAGE176
PLASTIC AND RESIN PARTS 176
REPLACING A BUCKET177
SHIMMING THE BUCKET 179
WELDING ON THE MACHINE 180
FIRE EXTINGUISHER (not supplied)180
AIR CONDITIONING181
ENGINE TROUBLESHOOTING 184
HARDWARE TORQUE INSPECTION 186
TORQUE AND SPECIFICATIONS PER COMPONENT187
ELECTRICAL 189
FUSES 189
BATTERIES 191
CONNECTING BOOSTER BATTERIES193
REPLACING A BULB194
MACHINE STORAGE 197
PREPARATION FOR STORAGE197
SPECIFICATIONS 199
ENGINE 199
HYDRAULIC SYSTEM 200
WEIGHTS201
DIMENSIONS 204-210
WORKING RANGE 213-221
LIFTING CAPACITIES 222-233
INDEX 237
IMAGES PREVIEW OF THE MANUAL:
VIDEO PREVIEW OF THE MANUAL:
PLEASE NOTE:
- This is the SAME exact manual used by your dealers to fix your vehicle.
- The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
- Any queries / doubts regarding your purchase, please feel free to contact [email protected]
I.G