Liebherr Tractor RL2 22 52 Pipe Layers Series 2 Service Manual – PDF DOWNLOAD
FILE DETAILS:
Liebherr Tractor RL2 22 52 Pipe Layers Series 2 Service Manual – PDF DOWNLOAD
Language : English
Pages : 986
Downloadable : Yes
File Type : PDF
Size: 85.2 MB
DESCRIPTION:
Liebherr Tractor RL2 22 52 Pipe Layers Series 2 Service Manual – PDF DOWNLOAD
DECALS ON THE MACHINE:
- Several safety decals are attached on the machine. They must be strictly observed to prevent death or serious
injury. The decals and the location of the decals on the machine are shown in the Operation and Maintenance
Manuals. (Please use them for more informations). - These safety decals must be checked regularly to insure they are still complete and legible.
- Missing or illegible safety decals must always be replaced immediately.
GENERAL SAFETY GUIDELINES
* Study the Operation and Maintenance Manual before operating or working on the machine.
– Make certain that you have additional information for the special attachments of your machine, read it and
make sure you understand it.
– Make certain that you have additional information for the special attachments of your machine, read it and
make sure you understand it.
* Only trained and authorized personnel may operate, maintain, service or repair this machine.
– Make sure you are aware of the minimum permissible operator age, as stated by law.
– Make sure you are aware of the minimum permissible operator age, as stated by law.
* Utilize only trained or specially instructed personnel, make sure that everybody is aware of the person /
persons responsible for the operation, installation of attachments, maintenance and repair of the machine.
persons responsible for the operation, installation of attachments, maintenance and repair of the machine.
* Determine the responsibility of the operator (to include adherence to traffic regulations) and permit him to
refuse to carry out unsafe instructions or practices give by a third person.
refuse to carry out unsafe instructions or practices give by a third person.
* Do not allow any personnel, either still to be trained or already in training, to work on the machine unless that
person is under the constant supervision of an experienced instructor or operator.
person is under the constant supervision of an experienced instructor or operator.
* Periodicaly, check to see if all persons observe all safety guidelines and work cautiously, as noted in the
Operation and Maintenance Manual.
Operation and Maintenance Manual.
Always wear proper clothing when operating or working on the machine.
– Avoid wearing rings, watches, bracelets, ties, scarves, open jackets, loose clothing such as an unbuttoned
or unzipped jackets, etc. They are dangerous, could get caught in the machinery and could cause serious
injury.
or unzipped jackets, etc. They are dangerous, could get caught in the machinery and could cause serious
injury.
– Wear the proper safety equipment for certain work, such as safety glasses, safety shoes, hard hats,
gloves, reflective vests, ear protection. . .
gloves, reflective vests, ear protection. . .
* Consult your employer or supervisor for specific safety equipment requirements and safety regulations
applicable to the job site.
applicable to the job site.
* Never use the safety lever, control levers or joysticks as handholds when entering or leaving the machine.
This could trigger an inadvertent movement of the machine and cause a serious accident.
This could trigger an inadvertent movement of the machine and cause a serious accident.
* Never jump off the machine! Climb on and off the machine only by using the steps, rails and handles
provided. When climbing on or off the machine, use both hands for support and face the machine.
provided. When climbing on or off the machine, use both hands for support and face the machine.
» Keep operator’s cab, steps, handrails and handles clean of oil, grease, mud, snow and ice. These
precautions will minimize the danger of slipping, stumbling or falling.
precautions will minimize the danger of slipping, stumbling or falling.
* If no other instructions were given, proceed as follows for maintenance and repairs.
– Park the machine on firm and level ground and lower the attachment to the ground.
– Turn the engine off and leave the ignition key in contact position.
– Actuate the operating levers / joysticks several times to relieve pressure in the hydraulic lines.
– Bring all operating and control levers into neutral position.
– Place the safety lever in the full down position before leaving the machine.
– Remove the ignition key.
– Park the machine on firm and level ground and lower the attachment to the ground.
– Turn the engine off and leave the ignition key in contact position.
– Actuate the operating levers / joysticks several times to relieve pressure in the hydraulic lines.
– Bring all operating and control levers into neutral position.
– Place the safety lever in the full down position before leaving the machine.
– Remove the ignition key.
IMAGES PREVIEW OF THE MANUAL:
TABLE OF CONTENTS:
Liebherr Tractor RL2 22 52 Pipe Layers Series 2 Service Manual – PDF DOWNLOAD
1 General Information
2 Special Tools, Application Guidelines
3 Technical Data – Maintenance Guidelines
4 Engine
5 Coupling and Splitter Box
6 Travel Hydraulic
7 Working Hydraulic
8 Hydraulic Components
9 Electrical System
10 Electronic Control
11 Travel Gear
12 Track Components
13 Pipe Layer Attachments
14 Attachments – Winch Pipe Layer
15 Main Frame – Add On Components
16 Tank Installation’s
17 Operators Platform, Heater, Air Conditioner
18 Special Attachments
19 Miscellaneous Informations
VIDEO PREVIEW OF THE MANUAL:
PLEASE NOTE:
- This is the same manual used by the DEALERSHIPS to SERVICE your vehicle.
- The manual can be all yours – Once payment is complete, you will be taken to the download page from where you can download the manual. All in 2-5 minutes time!!
- Need any other service / repair / parts manual, please feel free to contact us at heydownloadss @gmail.com . We may surprise you with a nice offer
S.V
