Liebherr LH 60 C Litronic 1212 Machine for Industrial Operator’s Manual SN 64724 – PDF DOWNLOAD
FILE DETAILS:
Liebherr LH 60 C Litronic 1212 Machine for Industrial Operator’s Manual SN 64724 – PDF DOWNLOAD
Language : English
Pages : 316
Downloadable : Yes
File Type : PDF
DESCRIPTION:
Liebherr LH 60 C Litronic 1212 Machine for Industrial Operator’s Manual SN 64724 – PDF DOWNLOAD
Product ID
Manufacturer: Liebherr-Hydraulikbagger GmbH
Type: LH 60 C Litronic
Type no.: 1212
From Serial no.: 64724
Preface:
- This operating manual is intended for you as the machine operator or as a member of the maintenance personnel. It contains warnings, important information and tips for working with the machine. It simplifies the process of familiarisation and getting to know the machine, and helps to avoid faults caused by incorrect operation.
- Compliance with the operating manual increases the reliability and service life of the machine.
- The operating manual must be kept with the machine. Make sure that a copy is always kept close to hand at the workplace.
- Read the operating manual before initial commissioning and subsequently at regular intervals. Everyone who carries out work with or on the machine must be familiar with and use this operating manual.
Examples of this work:
– Operation including setup and fitting attachments, elimination of faults, care,
disposal of service products and consumables
– Maintenance including servicing, inspection and repair
– Transporting or loading the machine
- The owner is responsible for supplementing the operating manual with instructions based on existing national regulations on accident prevention and environmental protection. In addition to this operating manual and the regulations on accident prevention applicable in the user’s country and at the place of use, it is also necessary to comply with the recognised technical rules on safety and technically proficient working.
- Some sections of this operating manual do not apply to all machines.
- Some illustrations in this operating manual may show details and implements that are different from your machine.
- In some illustrations, protective devices and covers have been removed to provide a clearer representation.
- Liebherr machines are subject to continuous development and improvement. This may have resulted in modifications to your machine which are possibly not referred to in this operating manual.
- If you require further explanations or information, please contact Liebherr customer service.
Liability and warranty:
- Due to the wide variety of products offered by other manufacturers (e.g. service products, lubricants, tool attachments and spare parts), Liebherr cannot examine the general suitability and absence of defects in third-party products which are used in or on Liebherr products. The same applies to possible interactions between third-party products and Liebherr products.
- Third-party products are used in or on Liebherr machines at the user’s own discretion.
Liebherr does not offer any warranty or accept any liability for losses of anykind caused by failures of or damage to Liebherr machines attributable to the use of third-party products. - Furthermore, Liebherr will not recognise any warranty claims attributable to incorrect operation, inadequate maintenance or the failure to follow safety instructions.
Modifications, conditions, copyright:
- Liebherr reserves the right to make modifications in the course of technical development, without issuing prior notification.
- Information and illustrations in these instructions are not allowed to be duplicated, distributed or used for the purposes of competing with Liebherr. All rights under copyright legislation are expressly reserved.
- The aforementioned provisions do not extend the warranty and liability conditions in the general terms and conditions of business of Liebherr.
TABLE OF CONTENTS:
Liebherr LH 60 C Litronic 1212 Machine for Industrial Operator’s Manual SN 64724 – PDF DOWNLOAD
1.1 Technical description 18
1.1.1 General overview 18
1.1.2 Uppercarriage 19
1.1.3 Undercarriage 20
1.1.4 Energy recuperation cylinder (option) 21
1.2 Technical data 22
1.2.1 Vibration emission 22
1.2.2 Sound emissions 23
1.2.3 Specifications 23
2 Safety warnings, signs 25
2.1 Safety advices and symbols 25
2.1.1 Designation of safety advices 25
2.1.2 Other designations 26
2.2 Additional rules and guidelines 26
2.3 Designated use 26
2.4 Signs on the machine 27
2.41 Warning signs 27
2.42 Information signs 31
2.4.3 Control description sticker 37
2.4.4 Identification tag 37
2.5 Safety warnings 38
2.51 General safety instructions 38
2.5.2 Avoid crushing and burning injuries 39
2.5.3 Avoid fire and explosions 39
2.54 Seeing and being seen 40
2.5.5 Protection against vibration 41
2.56 Before taking into operation 42
25.8 Starting the machine 43
2.5.9 Working 43
2.5.10 Shutting down the machine 45
2.5.11 Transporting the machine 46
2.5.12 Towing 46
2.5.13 Maintenance and repair 46
2.5.14 Modifications, add-ons and conversions 50
2.5.15 Removal and installation of the attachment pins 50
2.5.16 Falling object protective structures (FOPS and FGPS) 51
2.5.17 Checking machine for cracks 51
2.5.18 Regular checks 52
3 Control and operation 53
3.1 Control and operating elements 53
3.1.1 Overview of operator’s platform 53
3.1.2 Control unit A 55
3.1.3 Control unit B 56
3.1.4 Control units C, D and E 56
3.2 Control 57
3.2.1 Battery main switch 57
3.2.2 Getting in and getting out 58
3.2.3 Step lighting (option) 58
3.24 Emergency exit 59
3.2.5 Fire extinguisher (option) 60
3.2.6 Safety lever 60
3.2.7 Operator’s seat 61
3.2.8 Safety belt 66
3.2.9 Ignition key 67
3.2.10 Horn 68
3.2.11 Adjusting the operator’s cab — one-way adjusting (option) 68
3.2.12 Windscreen 70
3.2.13 Sun blind 72
3.2.14 Lighting 73
3.2.15 Cab lighting system 74
3.2.17 Windshield wipers 75
3.2.18 Windscreen washer system 76
3.2.19 Display 76
3.2.20 Status symbols 78
3.2.21 Main menu 90
3.2.22 Camera system menu 92
3.2.23 Automatic heating and automatic ventilation 92
3.2.24 Automatic air conditioning 96
3.2.25 Operating status menu 100
3.2.26 General settings menu 100
3.2.27 Machine-specific settings menu 107
3.2.28 Information menu 114
3.2.29 Tool Control menu 117
3.2.30 Messages menu 117
3.2.31 Auxiliary heater (option) 118
3.2.32 Drink holder 119
3.2.33 Radio system 119
3.2.34 LiDAT (option) 122
3.3 Operation 123
3.3.1 Inspection tour before putting into service 123
3.3.2 Refuelling 124
3.3.3 Fuelling with electric refuelling pump (option) 124
3.3.4 Preheating system (option) 126
3.3.5 Immobiliser (option) 128
3.3.6 Preparing machine for dust intensive application 129
3.3.7 Preparing machine for use in biologically sensitive areas 130
3.3.8 Starting diesel engine 130
3.3.9 Bringing machine to operating temperature 131
3.3.10 Engine speed and operating mode 131
3.3.11 After starting 133
3.3.12 Sensor-controlled low idle automatic 135
3.3.13 Automatic engine shut-off after idling (option) 135
3.3.14 Shutting off the diesel engine 136
3.3.15 Travelling 137
3.3.17 Travel alarm (option) 141
3.3.18 Controlling working attachment 142
3.3.19 Turning and braking uppercarriage 143
3.3.20 Overload warning system (option) 145
3.3.21 Lowering boom actively (option) 146
3.3.22 Lowering stick actively (option) 147
3.3.23 Selecting the working tool 147
3.3.24 Operating the working tool or working attachment with buttons 147
3.3.27 Grapple circuit (option) 1562
3.3.28 AutolLift (option) 153
3.3.29 Magnet system (option) 163
3.3.30 Reversing fan drive for radiator cleaning (option) 154
Shut-down and limitation devices 157
3.4.1 Stick cylinder shut-off (option) 157
3.42 Height limitation 162
General working methods 177
3.5.1 Safety belt 177
3.5.2 Drugs and alcohol 177
3.56.3 Working without damaging the machine 177
3.5.4 Preparatory work 179
3.5.5 Working position 179
3.5.6 Transferring loads 180
3.5.7 Loading a transport vehicle 180
3.5.8 Lifting loads 181
3.5.9 Identifying potential dangers and eliminate them. 181
3.5.10 Use of banksmen 182
Installation and removal of attachment parts 183
3.6.1 Using quick coupler 183
3.6.2 Installing and removing grapple on industrial stick 183
Parking the machine 186
Transport and assembly 187
Emergency operation 188
3.9.2 Lowering working attachment when engine is shut off 189
3.9.3 Lowering the operator’s cab in an emergency — one-way adjusting
(option) 189
4 Malfunctions 193
4.1 Service code tables 194
41.1 Warning symbols 194
4.2 Fault – Cause – Remedy 200
4.2.1 Diesel engine and fuel system 200
422 Hydraulic system 203
42.3 Travel gear 204
4.2.4 Electrical system 204
4.25 Heating, ventilation and air conditioning unit 204
426 Working attachment 205
4.3 Problem remedy 206
4.3.1 Uppercarriage fuses and relays 206
4.3.2 Operator’s platform fuses and relays 213
5 Maintenance 219
5.1 Inspection and maintenance schedule 219
5.2 Filling quantities and lubrication chart 226
5.2.1 Filling quantities 226
5.2.2 Lubricating chart 227
5.3 Fuels, lubricants and operating fluids 229
5.3.1 Diesel fuels 229
5.3.2 Engine oils 229
6.3.3 Coolant 230
5.3.4 Hydraulic oils 23
5.3.6 Gear oils 232
5.3.6 Pump distributor gear oils 233
5.3.7 Energy recuperation cylinder oils 234
53.8 Greases 234
5.3.9 Windscreen washer fluid 235
5.3.10 Lubricants and care products for electrical and mechanical systems 235
5.4 Access points for maintenance work 236
5.4.2 Access points under the uppercarriage 237
5.4.3 Access points on the undercarriage 238
5.5 Preparing for maintenance 239
5.5.1 Maintenance procedures 239
5.5.2 Safety procedures 239
5.6 General maintenance 240
5.6.1 Welding 240
5.6.3 Corrosion-proofing piston rods 240
5.6.4 Cleaning the machine 241
5.6.5 Cleaning travel gear 243
5.6.6 Cleaning the fan and radiator 243
5.7 Complete machine 244
5.7.1 Checking machine for proper condition and tightness 244
5.7.2 Lubricating bearings on machine and working attachment 244
5.7.3 Checking components for cracks 246
5.7.4 Lubricating hinges, locks and gas pressure springs of doors, hoods and
windows 246
5.7.5 Cleaning and treating rubber seals on doors and hoods 246
5.8 Drive group 247
5.8.1 Diesel engine: Bringing into maintenance position 247
5.8.2 Diesel engine: Checking oil level 247
5.8.3 Diesel engine: Checking condition, tightness and cleanliness 248
5.8.4 Fuel pre-filter: Draining water 248
5.8.5 Air filter: Emptying dust collecting tank 250
5.8.6 Air filter: Replacing main filter cartridge 251
5.8.7 Air filter: Replacing safety filter cartridge 253
5.8.8 Air filter and air lines: Checking tightness and condition 254
5.8.9 Diesel particulate filter (option): Starting and blocking regeneration 256
5.9 Cooling system 262
5.9.1 Checking coolant level 262
5.9.2 Checking cooling system and heat exchanger for contamination and
cleaning 263
5.10 Working hydraulics system 265
5.10.1 Depressurising hydraulic system 265
5.10.2 Hydraulic tank: Checking oil level 265
5.10.4 Bypass filter (option): checking the degree of contamination of the filter
cartridge 269
5.11 Electrical system 270
5.11.1 General information 270
5.11.2 Checking warning lights and displays when putting into service 271
5.12 Travel gear 272
5.12.1 Checking track tension 272
5.12.2 Tightening track 273
5.12.3 Slackening track 274
5.12.4 Track pads and sprocket wheels: Checking mounting 275
5.12.5 Checking the chains, sprockets, idlers, support rollers and track rollers
for wear 277
5.13 Working attachment 278
5.13.1 Lubricating working tool 278
5.13.2 Checking pin connections for secure seating 278
5.13.3 Checking steel structure for cracks 278
5.13.4 Pin bearing: Checking for wear 279
5.13.5 Energy recuperation cylinder: Performing visual inspection 279
5.13.6 Functional test 279
5.14 Operator’s cab, heating and air conditioning unit 280
5.14.1 Filling with windscreen washer fluid 280
5.14.2 Heating: Checking function 280
5.14.3 Auxiliary heater (option): Checking function 282
5.14.4 Switching on air conditioning unit 282
5.14.5 Checking and cleaning condenser 282
5.16 Lubrication system 284
5.15.1 Lubrication system: Filling grease 284
5.15.2 Checking lubrication of bearings (grease collar) 284
5.15.3 Pipes, hoses and lubricating points: Checking tightness and condition 285
6 Appendix 287
Index 289
IMAGES PREVIEW OF THE MANUAL:
VIDEO PREVIEW OF THE MANUAL:
PLEASE NOTE:
- This is the SAME exact manual used by your dealers to fix your vehicle.
- The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
- Any queries / doubts regarding your purchase, please feel free to contact [email protected]
S.V