Liebherr L 580 1170 Wheel Loader Service Manual – PDF DOWNLOAD
FILE DETAILS:
Liebherr L 580 1170 Wheel Loader Service Manual – PDF DOWNLOAD
Language : English
Pages : 892
Downloadable : Yes
File Type : PDF
Size: 204 MB
DESCRIPTION:
Liebherr L 580 1170 Wheel Loader Service Manual – PDF DOWNLOAD
- This service manual is designed for trained specialist staff of the Liebherr organisation and their dealers.
- This service manual contains specialist knowledge for repairing Liebherr construc- tion machines. Basic specialist knowledge on electronics, hydraulics, mechanics and engine technology is not contained in this service manual. Therefore special- ized training and qualifications are necessary. Liebherr recommends participating in the Liebherr training program for construction machines.
In this service manual you will find information on:
- You will find information on controls and operation in the operator’s manual. Information on spare parts are in the spare parts catalogue. Please observe the local accident prevention laws.
- You can find information on repairs of machine parts in the service documentation under “Wheel loader – repair instructions”.
Safety instructions
General safety instructions
1. Familiarise yourself with the operator’s manual before starting up the
machine.
Make sure that you are in possession of additional instructions for any special
equipment installed on your machine, and that you have read and understood
them.
2. Only expressly authorised personnel may operate, service or repair the
machine.
Observe the legal minimum ages.
3. Only trained or instructed personnel may operate the machine. Clearly assign
responsibility for operation, rigging, maintenance and repair work.
4. The operator of the machine must ensure that no persons are in the operating
area of the machine on the basis of a risk assessment conducted in respect of
the operating site.
5. Clearly establish the driver’s responsibilities (also with respect to traffic regulations)
and authorise him to refuse to carry out unsafe instructions from third
parties.
6. Personnel undergoing training and instruction, or who are not yet fully qualified,
may only be allowed to work on the machine under constant supervision
by an experienced person.
7. Now and again, check that your personnel are working safely and are aware of
possible dangers in observance of the operator’s manual.
8. Wear safe working clothes when working on the machine.
Do not wear rings, wristwatches, ties, scarves, unbuttoned jackets, loose
clothing or similar garments, as they can become caught in the machinery and
cause injury.
Certain tasks require: safety glasses, safety boots, hard hats, protective
gloves, reflective vests, ear protection etc.
9. Ask the site manager about any special safety regulations in force on the
construction site.
10. Do not hold onto the steering column, the control panel or the control levers
when getting on or off the machine.
You might inadvertently trigger movements which could lead to accidents.
11. Never jump down from the machine. Use the steps, ladders and platforms
provided for getting on and off.
12. Keep all handles, steps, rails, gangways, platforms and ladders free from oil,
grease, mud snow and ice. This reduces the risk of slipping, tripping up or
falling.
13. Familiarise yourself with the emergency exit through the right cab door and/or
the rear window.
14. Unless there are other instructions, perform maintenance and repair work as
follows:
Procedure:
• Park the machine on firm, level ground and lower the working attachment
to the ground.
• Move all control levers to neutral.
• Turn off the diesel engine and take out the ignition key.
15. Before all work on the hydraulic system, depressurise the hydraulic circuits
and the hydraulic tank as described in the operator’s manual.
16. Lock the working hydraulics to prevent accidental actuation before leaving the
operator’s seat.
TABLE OF CONTENTS:
Liebherr L 580 1170 Wheel Loader Service Manual – PDF DOWNLOAD
010.1 Safety instructions 010-4
0101.1 General safety instructions 010-4
010.1.2 Instructions on preventing crushing injuries and burns 010-5
010.1.3 Instructions on preventing fires and explosions 010-5
010.14 Safety instructions for start-up 010-6
0101.5 Safety precautions during start-up 010-6
010.1.6 Instructions for safe working 010-7
010.1.7 Safety instructions for driving on slopes 010-8
0101.8 Parking safely 010-8
010.1.9 Transporting the machine safely 010-8
010.1.10 Towing the machine safely 010-9
010.1.11 Measures for ensuring safe maintenance 010-9
010.1.12 Safety instructions for maintenance work on machines with hydro
accumulators 010-12
010.1.13 Safety instructions for welding work on the machine 010-12
010.1.14 Safety instruction for working on the working attachment 010-12
010.1.15 Safety instructions for transporting the machine by crane 010-13
010.1.16 Safe maintenance of hydraulic hoses and hose lines 010-13
010.1.17 Roll over protective structure (ROPS) and falling object protection
structure (FOPS) 010-14
010.1.17.1 Preventing accidents 010-14
010.1.17.2 Preventing injuries 010-14
010.1.18 Attachments and accessories 010-14
010.1.19 Protection against vibrations 010-15
010.1.20 See and be seen 010-15
010.1.20.1 Field of view and visual aids 010-15
010.1.20.2 Measures during operation. 010-16
010.1.20.3 Modifications to the machine 010-16
010.1.21 Danger area of the machine 010-16
010.2.1 Special tools in general 010-18
010.2.2 Special tools for Liebherr diesel engines 010-19
010.2.3 Special tools for hydraulic cylinders (z-bar kinematics) 010-20
010.2.4 Special tools, hydraulic cylinder (industrial machine) 010-20
010.2.56 Special tools for steering cylinders 010-21
010.2.6 Special tools for the electrical system 010-21
010.2.7 Special tools for the transmission 010-21
010.2.8 Special tools for front axle MT-L II 010-22
010.29 Special tools for rear axle MT-L II 010-22
010.2.10 Special tools for the air conditioning system 010-22
010.2.11 Special tools for Grammer driver’s seat 010-23
010.2.12 Special tools for cab glazing 010-23
010.2.13 Special tools for the central lubrication system (Liebherr) 010-23
010.2.14 Special tools for the central lubrication system (Groeneveld) 010-24
Standards and regulations 010-25
010.3.1 Prestressing forces and tightening torques for bolts with metric
010.3.1.1 Range of application and purpose 010-25
010.3.1.2 Other applicable documents 010-25
010.3.1.3 Modifications and descriptions 010-26
010.3.1.4 Tightening torques 010-26
010.3.2 Liebherr standards for assembly instructions and tightening torques010-32
Preservation guidelines 010-33
010.4.1 General information 010-33
010.4.2 Machine out of service for an unknown period of time 010-33
010.4.3 Putting the machine out of service 010-34
010.4.3.1 Out of service for up to 2 months 010-34
0104.3.2 Out of service for up to 12 months 010-35
0104.3.3 Out of service for longer than 12 months 010-36
010.4.4 Putting back into service 010-36
LBH/11450184/17/211-20190329_110025/en
020.1 Overall machine 020-5
0201.1 Complete machine with bucket (Z lift arms)
L580-1170/26443-; 020-5
0201.2 Complete machine with bucket (industrial lift arms)
L580-1170/26443-; 020-6
020.1.3 Attachment: Light material bucket
L580-1170/26443 020-8
020.14 Attachment: High dump bucket
L580-1170/26443-; 020-10
0201.5 Attachment: Forklift
L580-1170/26443-; 020-11
020.1.6 Attachment: Timber grabber
L580-1170/26443-; 020-13
020.2 Drive group 020-15
020.2.1 Diesel engine
L580-1170/26443-; 020-15
020.2.2 Diesel particulate filter temperature sensors
L580-1170/26443-; 020-16
020.2.3 Fuel tank
L580-1170/26443-; 020-17
020.24 Fuel pre-filter (separator filter)
L580-1170/26443-; 020-17
020.2.5 Fuel fine filter
L580-1170/26443-; 020-17
0202.6 Air filter vacuum switch
L580-1170/26443-; 020-17
020.2.7 Clutch
L580-1170/26443-; 020-17
0202.8 Splitter box
L580-1170/26443-; 020-18
020.3 Cooling system 020-19
020.3.1 Fan gear pump
L580-1170/26443~; 020-19
020.3.2 Fan gear motor
L580-1170/26443-; 020-19
020.3.3 Hydraulic oil temperature sensor B8
L580-1170/26443-; 020-19
020.4 Working hydraulics 020-20
020.4.1 Working hydraulics pump
L580-1170/26443- 020-20
020.4.2 Control valve block
L580-1170/26443-; 020-20
020.4.4 Working hydraulics lockout solenoid valve Y14
020.4.5 Pilot control hydro accumulator
020.4.6 Float position pressure switch
020.4.7 Stabilisation module
020.4.8 Ride control hydro accumulator
020.4.9 Z kinematics and industrial lift arms lift cylinder
020.4.10 Z kinematics tilt cylinder
Travel hydraulics 020-24
020.5.1 Variable displacement pump
020.5.2 Variable displacement motor 1
020.5.3 Variable displacement motor 2
020.5.4 Variable displacement motor scavenging gear pump
Hydraulic components 020-26
020.6.1 Filter unit
020.6.2 Breather filter
Steering system 020-27
020.7.1 Steering pump
020.7.2 Servostat
020.7.3 Steering cylinder
020.7.4 Steering damper hydro accumulator
020.7.5 Emergency steering pump
020.7.6 Emergency steering pressure switch B3
Service manual Contents
020.7.7 Emergency steering check pressure switch B3a
L580-1170/26443-; 020-28
020.8 Brake system 020-29
0208.1 Brake system gear pump
L580-1170/26443-; 020-29
020.8.2 Compact brake valve
L580-1170/26443-; 020-29
0208.3 Service brake hydro accumulator
L580-1170/26443-; 020-29
020.84 Brake light pressure switch B12
L580-1170/26443-; 020-29
0208.5 Accumulator charge pressure switch B19
L580-1170/26443-; 020-30
020.8.6 Parking brake hydro accumulator
L580-1170/26443-; 020-30
0208.7 Overspeed protection solenoid valve Y16
L580-1170/26443-; 020-30
020.9 Electrical system 020-31
0209.1 Central control unit (Master 4)
L580-1170/26443-; 020-31
020.9.2 Input module
L580-1170/26443-; 020-31
020.9.3 Output module
L580-1170/26443-; 020-31
020.94 Battery
L580-1170/26443-; 020-32
0209.5 Voltage transformer
L580-1170/26443~; 020-32
020.9.6 Reversing camera
L580-1170/26443-; 020-32
020.10 Gearbox 020-34
020.10.1 Transmission
L580-1170/26443-; 020-34
2 020.10.2 Gear shifting solenoid valves
g L580-1170/26443-; 020-35
ol
g 020.10.3 Speed sensors
s L580-1170/26443-; 020-35
§ 020.10.4 Transmission gear pump
3 L580-1170/26443-; 020-35
: 020.11 Axles and drive shafts 020-36
3 020.11.1 Front axle
L580-1170/26443-; 020-36
020.112 Rear axle
L580-1170/26443-; 020-36
Contents Service manual
020.11.4 Rear cardan shaft
L580-1170/26443-; 020-37
020.11.5 Tyres
L580-1170/26443-; 020-37
020.11.5.2 Tyres for timber handling 020-38
020.11.5.3 Special tyres 020-39
020.11.5.4 Tyres for machines with optional accessories 020-39
020.12 Steel parts of the basic machine 020-41
020.12.1 Ballast weight
L580-1170/26443-; 020-41
020.13 Working attachment 020-42
020.13.1 Lift arms with Z kinematics
L580-1170/26443-; 020-42
020.14 Operator’s cab, heating and air conditioning 020-43
020.14.1 Heating, air conditioning
L580-1170/26443-; 020-43
020.14.2.1 Air conditioning 020-43
020.14.3.1 Air conditioning compressor 020-43
020.14.4 Condenser
L580-1170/26443-; 020-43
020.14.5 Dryer
L580-1170/26443-; 020-44
020.14.6 Air conditioning pressure switch
L580-1170/26443-; 020-44
020.14.7 Anti-icing temperature sensor
L580-1170/26443-; 020-44
020.15 Lubrication system 020-46
020.15.1 Central lubrication system (Liebherr)
L580-1170/26443-; 020-46
020.15.1.1 Central lubrication pump 020-46
020.15.1.2 Progressive distributor 020-46
030 Maintenance 030-1
030.1 Maintenance and inspection schedule 030-10
030.2 Filling quantities and lubrication chart 030-15
030.2.1 Recommended lubricants
L580-1170/26443-; 030-15
030.22 Recommended operating fluids
L580-1170/26443-40348; 030-16
LBH/11450184/17/211-20190329_110025/en
030.2.3 Recommended operating fluids
L580-1170/40349-; 030-16
030.3 Lubricants and fuels 030-17
030.3.1 General information on lubricants and fuels 030-17
030.3.1.1 General questions 030-17
030.3.1.2 Safety data sheets 030-17
030.3.1.3 Technical data sheets 030-17
030.3.1.4 Specific Liebherr standards 030-17
030.3.2 General information on changing lubricants and fuels 030-17
030.3.3 Converting hydraulic system from mineral oils to biodegradable
hydraulic fluids 030-18
030.34 Diesel fuels
L580-1170/26443-; 030-18
030.3.4.1 Specification 030-18
030.3.4.2 Sulphur content of the diesel fuel, lubricity 030-18
030.3.4.3 Diesel fuel at low temperatures (winter operation) 030-19
030.3.4.4 Flow improvers at low temperatures 030-19
030.3.5 Diesel fuels for diesel engines without emission-type approval
L 580-1170; 030-19
030.3.5.1 Minimum quality requirement 030-19
030.3.6 Lubricating oils for diesel engines
L580-1170/26443-; 030-20
030.3.6.1 Lubricating oil quality 030-20
030.3.6.2 Lubricating oil viscosity 030-20
030.3.6.3 Complicating factors affect the oil change 030-21
030.3.7 Engine oils for diesel engines without emission-type approval
L580-1170; 030-21
030.3.7.1 Liebherr recommendation 030-21
030.3.7.2 Other approved engine oils 030-21
030.3.7.3 Minimum quality requirement 030-22
030.3.7.4 Changing intervals 030-22
030.3.7.5 Complicating factors 030-22
030.3.8 Refrigerant
L 580-1170; 030-22
030.3.9 Coolants for diesel engines
L580-1170/26443-40348; 030-23
030.3.9.1 General recommendations 030-23
030.3.9.2 Water (fresh water) 030-23
copyright © Liebherr-Werk Bischofshofen GmbH 2018
1580-1170 LIEBHERR 1
Contents Service manual
030.3.9.3 Coolant mixing ratio 030-23
030.3.9.4 Permissible antifreeze and corrosion inhibitors 030-24
030.3.9.5 Corrosion inhibitors without antifreeze 030-24
030.3.10 Coolants for diesel engines
L580-1170/40349-; 030-25
030.3.10.1 General recommendations 030-25
030.3.10.2 Water (fresh water) 030-25
030.3.10.3 Coolant – Mixing ration 030-26
030.3.10.4 Approved antifreeze and corrosion inhibitors 030-26
030.3.10.56 Permissible premixed antifreeze/corrosion inhibitors 030-26
030.3.10.6 Corrosion inhibitors without antifreeze 030-27
030.3.11 Hydraulic oil
L580-1170/26443-; 030-27
030.3.11.1 Liebherr hydraulic oil 030-28
030.3.11.2 Using engine oil as hydraulic oil 030-28
030.3.11.3 Warming up 030-29
030.3.11.4 Biodegradable hydraulic oils 030-29
030.3.11.5 Changing the oil, analysing the oil, changing filters 030-30
030.3.12 Lubricating oils for splitter boxes
L580-1170/26443-; 030-31
030.3.13 Lubricating oils for transmissions
L580-1170/26443-; 030-32
030.3.14 Lubricating oils for axles
L580-1170/26443-; 030-33
030.3.15 Lubrication grease and other lubricants
L580-1170/26443-; 030-33
030.3.15.1 Minimum quality requirements 030-34
030.3.15.2 Liebherr lubrication grease 030-34
030.4 Maintenance tasks 030-36
030.4.1 Safety precautions
L580-1170/26443-; 030-36
030.4.2 Preparatory tasks for maintenance 030-36
030.4.2.1 Maintenance positions
L580-1170/26443-; 030-37
030.4.2.2 Opening the service accesses
L580-1170/26443-; 030-38
030.4.2.3 Turning off the battery main switch
L580-1170/26443-; 030-40
030.4.3 Overall machine 030-41
copyright ® Liebher-Werk Bischofshofen GmbH 2019
12 LIEBHERR 1580-1170
LBH/11450184/17/211-20190329_110025/en
L580-1170/26443-; 030-41
030.4.3.2 Removing loose parts, dirt, ice and snow from the
machine
L580-1170/26443-; 030-41
030.4.3.3 Cleaning the machine
L580-1170/26443-; 030-41
030.4.3.4 Checking the machine for leaks
L580-1170/26443-; 030-43
030.4.3.5 Making sure the bolted connections are tight
1 580-1170/26443-; 030-43
030.4.3.6 Corrosion protection system for use with salt and arti-
ficial fertilisers (optional): Carrying out corrosion
protection
L580-1170/26443-; 030-43
030.4.3.7 Qil analyses
L580-1170/26443-; 030-43
0304.4 Drive group 030-50
030.4.4.1 Checking the engine oil level
L580-1170/26443-; 030-50
030.44.2 Changing diesel engine oil
1 580-1170/26443-; 030-51
030.4.4.3 Changing the engine oil filter
L580-1170/26443-; 030-52
030.4.4.4 Checking the V-ribbed belt on the engine
L580-1170/26443-; 030-53
030.4.4.5 Changing the V-ribbed belt on the engine
L580-1170/26443-; 030-54
030.44.6 Checking the mounting and sensor cable connec-
tions of the engine control units
L580-1170/26443-; 030-55
030.4.4.7 Checking the engine valve clearance
L580-1170/26443-; 030-55
030.4.4.8 Changing the diesel engine oil separator filter
cartridge
L580-1170/26443-; 030-59
030.4.4.9 Checking the engine heating flange
L580-1170/26443-; 030-60
030.4.4.10 Changing the engine heating flange
L580-1170/26443-; 030-60
030.4.4.11 Draining off condensate and sediment from the fuel
tank
L580-1170/26443-; 030-61
030.4.4.12 Draining off condensate from the Separ fuel pre-filter
1 580-1170/26443-; 030-62
030.4.4.14 Changing the fuel fine filter
030.4.4.15 Bleeding the fuel system
030.4.4.17 Cleaning the air filter service cover and dust
030.4.4.18 Checking the air suction system for leaks and tight
030.4.4.19 Cleaning or changing the main filter element
030.4.4.20 Changing the air filter safety element
030.4.4.21 Cleaning the oil bath air filter (optional)
030.4.4.22 Checking the oil level in the splitter box
030.4423 Changing the splitter box oil
0304.4.24 Checking the exhaust system for leaks and tight
030.4.4.25 Cleaning or changing the diesel particulate filter
Cooling system 030-86
030.4.5.1 Checking the coolant antifreeze and corrosion inhib-
030.4.5.2 Cleaning the cooling system
0304.5.3 Changing the coolant
0304.5.4 Changing the coolant
Working hydraulics 030-96
030.4.6.1 Lubricating the solenoids, universal joints and
Hydraulic components 030-96
030.4.7.1 Checking the oil level in the hydraulic tank
L580-1170/26443-; 030-96
030.4.7.2 Checking and cleaning the magnetic rod on the
hydraulic tank
L580-1170/26443-; 030-98
030.4.7.3 Draining off condensate and sediment from the
hydraulic tank
L580-1170/26443-; 030-99
030.4.7.4 Changing the hydraulic tank return suction filter
L580-1170/26443-; 030-100
030.4.7.5 Changing the hydraulic tank breather filter
L580-1170/26443-; 030-101
030.4.7.6 Hydraulic tank – changing the oil in the hydraulic
system
L580-1170/26443-; 030-101
0304.8 Steering system 030-103
030.4.8.1 Testing the steering
L580-1170/26443-; 030-103
030.4.8.2 Lubricating the bearing points on the steering cylin-
ders
L580-1170/26443-; 030-104
030.4.9 Brake system 030-105
030.4.9.1 Testing the service brake and parking brake
L580-1170/26443-; 030-105
030.4.9.2 Checking the service brake discs for wear
L580-1170/26443-; 030-106
030.4.9.3 Checking the gap and wear on the parking brake
linings
L580-1170/26443-; 030-108
030.4.10 Electrical system 030-113
030.4.10.1 Checking the lights
L580-1170/26443-; 030-113
030.4.10.2 Checking the batteries, fluid level and terminals
1 580-1170/26443-; 030-114
030.4.10.3 Changing the travel direction rocker switch and cap
(optional) on the control lever
1 580-1170/26443-; 030-116
030.4.11 Gearbox 030-118
030.4.11.1 Checking the transmission oil level
1 580-1170/26443-; 030-118
030.4.11.2 Changing the transmission oil
L580-1170/26443-; 030-119
030.4.11.3 Changing the transmission oil filter
L580-1170/26443-; 030-120
030.4.12 Axles and drive shafts 030-121
copyright ® Liebherr-Werk Bischofshofen GmbH 2019
1580-1170 LIEBHERR 15
Contents Service manual
030.4.12.1 Checking the axle oil levels
L580-1170/26443-; 030-121
0304.122 Changing the axle oil
L580-1170/26443-; 030-121
030.4.12.3 Checking the cardan shafts
L580-1170/26443-; 030-123
030.4.124 Checking the tyre pressure
L580-1170/26443-; 030-123
030.4.12.5 Checking the wheel tightness
L580-1170/26443-35541; 030-123
030.4.12.6 Checking the wheel tightness
L580-1170/35542-; 030-124
030.4.13 Steel parts of the basic machine 030-125
030.4.13.1 Lubricating the articulation bearing and the rear axle
oscillating bearing
L580-1170/26443-; 030-125
030.4.13.2 Covering – lubricating locks and hinges
L580-1170/26443-; 030-126
0304.13.3 Greasing the rear section cover lower hinges
L580-1170/26443-; 030-126
030.4.14 Working attachment 030-127
030.4.14.1 Lubricating the lift arms and attachment
L580-1170/26443-; 030-127
030.4.14.2 Checking the bucket bearing seals and the bearing
bushings on the lift arms
L580-1170/26443-; 030-128
030.4.14.3 Checking the lift arm bucket stops
L580-1170/26443-; 030-130
030.4.14.4 Lubricating and testing the quick-change device
L580-1170/26443-; 030-131
030.4.15 Operator’s cab, heating and air conditioning 030-132
030.4.15.1 Lubricating the elongated hole on the accelerator
pedal and checking the bearing
L580-1170/26443-; 030-132
030.4.15.2 Cleaning the fresh and recirculated air filters
L580-1170/26443-; 030-133
030.4.15.3 Changing the fresh and recirculated air filters
L580-1170/26443-; 030-135
030.4.15.4 Checking the condition and function of the safety belt
L580-1170/26443-; 030-136
030.4.156.5 Checking and topping up the windscreen washer
reservoir
L580-1170/26443-; 030-136
030.4.156 Lubricating the cab door hinges
L580-1170/26443-; 030-137
copyright ® Liebher-Werk Bischofshofen GmbH 2019
16 LIEBHERR 1580-1170
LBH/11450184/17/211-20190329_110025/en
030.4.15.7 Checking the seals on the driver’s cab
L580-1170/26443-; 030-137
030.4.15.8 Heating and air conditioning unit: Testing the function
L580-1170/26443-; 030-137
0304.16 Lubrication system 030-139
030.4.16.1 Checking the lubrication system grease reservoir
level
L580-1170/26443-; 030-139
030.4.16.2 Checking the pipes, hoses and lubrication points of
the lubrication system
L580-1170/26443-; 030-140
030.4.16.3 Checking whether metered quantities are adequate
L580-1170/26443-; 030-140
030.5 Testing and adjustment checklist
1L580-1170/26443-; 030-141
030.6 Testing and adjustment tasks 030-146
0306.1 Safety precautions
L580-1170/26443-; 030-146
030.6.2 Overall machine 030-147
030.6.2.1 Preparatory tasks for testing and adjustment
L580-1170/26443-; 030-147
030.6.2.2 Bringing the machine up to operating temperature
L580-1170/26443-; 030-148
030.6.3 Drive group 030-149
030.6.3.1 Calibrating the pedals
L580-1170/26443-; 030-149
030.6.3.2 Checking the engine speed
L580-1170/26443-; 030-149
030.6.3.3 Engine: Reading the service files
L580-1170/26443-; 030-150
030.6.3.4 Diesel particulate filter: Performing service regenera-
tion.
1 580-1170/26443-; 030-151
030.6.4 Cooling system 030-153
030.6.4.1 Fan gear motor proportional pressure relief valve
L580-1170/26443-; 030-153
0306.5 Working hydraulics 030-155
030.6.5.1 Working hydraulics pump flow regulator (standby
pressure)
1 580-1170/26443-; 030-155
030.6.5.2 Working hydraulics pump, flow regulator (differential
pressure)
L580-1170/26443-; 030-157
0306.5.4 Z kinematics control valve block secondary pressure
030.6.5.5 Z kinematics control valve block primary pressure
030.6.5.6 Z kinematics control valve block LS pressure cut-off
030.6.5.7 Industrial lift arm control valve block secondary pres-
030.6.5.8 Industrial lift arm control block, primary pressure
0306.5.9 Industrial lift arms control valve block LS pressure
030.6.5.10 Stabilisation module cut-off function
030.6.5.11 Nitrogen filling of ride control hydro accumulator
030.6.5.12 Testing the control valve block for leakage
Hydraulic components 030-174
030.6.6.1 Checking the hydraulic lines for damage
Travel hydraulics 030-179
030.6.7.1 Travel pump, high pressure sensor
030.6.7.2 Travel pump replenishing pressure relief valve
030.6.7.3 Travel pump high pressure relief valves
030.6.7.4 Travel pump pressure cut-off
030.6.7.5 Travel pump block curve calibration
030.6.7.6 Travel motors, automatic calibration
0306.7.7 Hydro accumulator supply, nitrogen filling
0306.7.8 Engine output
tion sensor and magnetic rod
Steering system 030-194
030.6.8.1 Steering pump LS pressure cut-off valve
030.6.8.2 Steering pump flow regulator (standby pressure)
030.6.8.3 Steering pump flow regulator (differential pressure)
Brake system 030-198
030.6.9.1 Compact brake valve, hydro accumulator charging
030.6.9.2 Service brake pressure
030.6.9.3 Service brake hydro accumulator capacity
030.6.9.4 Accumulator charge pressure switch shift pressure
Electrical system 030-202
030.6.10.1 Central control unit (Master4) Creating a Servicefile
030.6.10.2 Central control unit (Master4): software update
030.6.10.3 Setting the IP addresses of the central control unit
030.6.10.4 Resetting the central control unit (Master)
030.6.10.5 Testing the CAN line
system information
Gearbox 030-219
030.6.11.1 Control valve block shift pressure
030.6.11.2 Nitrogen filling of transmission hydro accumulator
Operator’s cab, heating and air conditioning 030-221
the air conditioning unit
L580-1170/26443-; 030-221
L580-1170/26443-; 030-222
030.6.12.3 Formatting the display and reinstalling the software
(Display4)
L580-1170/26443-; 030-223
030.6.13 Options 030-225
030.6.13.1 Checking the LiDAT connection status
L580-1170/26443-; 030-225
030.6.13.2 LiDAT: activating data transmission manually
1580-1170; 030-227
040 Drive group 040-1
040.1 Engine 040-3
040.1.1 Diesel engine overview
L580-1170/26443-; 040-3
040.1.2 Electrical components on the engine
L580-1170/26443-; 040-7
040.1.3 Speed sensor for crankshaft
L580-1170/26443-; 040-8
040.1.4 Camshaft speed sensor
L580-1170/26443-; 040-9
040.1.5 Fuel system 040-10
040.1.5.1 Overview of the fuel system
L580-1170/26443-; 040-11
040.1.5.2 Fuel level sensor
L580-1170/26443-; 040-12
040.1.6 Air filter system 040-12
040.1.6.1 Air filter
L580-1170/26443-; 040-13
040.1.6.2 Vacuum switch
L580-1170/26443-; 040-14
040.1.7 Exhaust system 040-14
040.1.7.1 Overview of the diesel particulate filter
L580-1170/26443-; 040-15
040.1.7.2 Diesel oxidation catalyst (DOC)
L580-1170/26443-; 040-20
040.1.7.3 Diesel particulate filter module
L580-1170/26443-; 040-21
040.1.7.4 Removing the diesel particulate filter
L580-1170; 040-21
040.1.7.5 Installing the diesel particulate filter
L580-1170; 040-25
L580-1170/26443-; 040-29
040.3 Splitter box
L580-1170/26443-; 040-31
050 Cooling system 050-1
050.1 Overview of the cooling system
1L580-1170/26443-; 050-2
050.2 Cooling system hydraulics 050-3
050.2.1 Overview of the hydraulics cooling system
L580-1170/26443-; 050-3
0502.2 Fan gear pump
L580-1170/26443-; 050-5
050.2.3 Fan gear motor
L580-1170/26443~; 050-7
050.3 Cooling system electronics 050-11
050.3.1 Electric fan speed control
L580-1170/26443-; 050-11
050.3.2 Hydraulic oil temperature sensor
L580-1170/26443-; 050-13
060 Working hydraulics 060-1
060.1 Working hydraulics – Overview
L580-1170/26443-34156; 060-3
060.2 Overview of the working hydraulics
L580-1170/34157-; 060-10
060.3 Working hydraulics pump
L580-1170/26443-; 060-15
060.4 Control valve block
L580-1170/26443-; 060-23
060.5 Pilot control 060-29
060.5.1 Overview of the pilot control unit
L580-1170/26443-; 060-29
060.5.2 Pilot control unit
L580-1170/26443-; 060-33
060.5.3 Pilot control solenoid valve
L580-1170/26443-; 060-38
060.54 Pilot control hydro accumulator
L580-1170/26443-; 060-39
0605.5 Float position pressure switch
L580-1170/26443-; 060-40
060.6 Ride control 060-42
L580-1170/26443-34156; 060-42
060.6.2 Overview of the ride control system
L580-1170/34157-; 060-48
060.6.3 Stabilisation module
L580-1170/26443-; 060-51
060.6.4 Hydro accumulator unit
L580-1170/26443-; 060-55
060.7 Hydraulic cylinders of the working hydraulics 060-57
060.7.1 Hydraulic cylinders for Z kinematics 060-57
060.7.1.1 Z kinematics lift cylinder
L580-1170/26443-; 060-57
060.7.1.2 Z kinematics tilt cylinder
L580-1170/26443-; 060-58
060.7.2 Hydraulic cylinders for industrial lift arms 060-59
060.7.2.1 Lift cylinder for industrial lift arms
L580-1170/26443-; 060-59
060.7.2.2 Industrial lift arms {ilt cylinder
L580-1170/26443-; 060-60
070 Travel hydraulics 070-1
070.1 Travel hydraulics overview
L580-1170/26443-35016; 070-2
070.2 Travel hydraulics overview
L580-1170/35017-37527; 070-12
070.3 Travel hydraulics overview
L580-1170/37528-; 070-16
070.4 Variable displacement pump
L580-1170/26443-37527; 070-20
070.5 Travel pump
L580-1170/37528-~; 070-31
070.6 Travel motors 070-37
070.6.1 Overview of the variable displacement motors
L580-1170/26443-; 070-37
070.6.2 Variable displacement motor
1 580-1170/26443-; 070-40
070.6.3 Discharge cut-off solenoid valve
L580-1170/26443-; 070-45
070.6.4 Supply hydro accumulator
L580-1170/26443-; 070-47
080 Hydraulic components 080-1
080.1 Hydraulic tank 080-2
080.1.1 Overview of the hydraulic tank
L580-1170/26443-; 080-2
080.1.2 Filter unit
L580-1170/26443-; 080-5
080.1.3 Breather filter
L580-1170/26443-; 080-10
090 Steering system 090-1
090.1 Steering system overview
L580-1170/26443-34445; 090-2
090.2 Steering system overview
L580-1170/34446-; 090-9
090.3 Steering pump
L580-1170/26443-; 090-13
090.4 Servostat
L580-1170/26443-; 090-20
090.5 Steering cylinder 090-25
080.5.1 Steering cylinder overview
L580-1170/26443-; 090-25
0905.2 Steering cylinder pressure relief valve
L580-1170/34446-; 090-27
090.5.3 Steering damper hydro accumulator
L580-1170/26443-; 090-28
090.6 Emergency steering 090-30
0906.1 Emergency steering overview
L580-1170/26443-; 090-30
090.6.2 Emergency steering pump
L580-1170/26443~; 090-34
0906.3 Emergency steering electronics 090-36
090.6.3.1 Overview of the electronic control system
L580-1170/26443-; 090-36
090.6.3.2 Emergency steering pressure switch
L580-1170/26443-; 090-38
090.6.3.3 Emergency steering check pressure switch
L580-1170/26443-; 090-39
090.6.4 Valve block
L580-1170/26443-; 090-40
090.7 Joystick steering 090-43
090.7.1 Joystick steering – overview
L580-1170/34446-; 090-43
100.1 Overview of the brake system
L580-1170/26443-; 100-2
100.2 Service brake and parking brake 100-9
100.2.1 Compact brake valve
L580-1170/26443-; 100-9
100.3 Service brake 100-13
100.3.1 Service brake hydro accumulator
L580-1170/26443-; 100-13
100.3.2 Brake light pressure switch
L580-1170/26443-; 100-14
100.3.3 Accumulator charge pressure switch
L580-1170/26443-; 100-15
100.4 Parking brake 100-16
100.4.1 Parking brake
L580-1170/26443-; 100-16
100.4.2 Disc brake
1580-1170/26443-; 100-18
100.4.3 Parking brake hydro accumulator
L580-1170/26443-; 100-21
100.5 Overspeed protection 100-22
100.5.1 Overview of the overspeed protection system
L580-1170/26443-; 100-22
100.5.2 Overspeed protection solenoid valve
L580-1170/26443-; 100-26
Electrical system 110-1
110.1 Overview of the electrical system
L580-1170/26443-; 110-2
110.2 Lighting
L580-1170/26443-; 110-7
110.3 Circuit diagrams
L580-1170/26443-; 110-9
110.4 Electronic control unit 110-11
110.4.1 Central control unit (Master4)
L580-1170/26443-; 110-11
110.4.2 Modules 110-156
1104.21 Input modules
L580-1170/26443-; 110-15
110.4.2.2 Output modules
L580-1170/26443-; 110-18
110.5 Electrical components of the driver’s cab 110-23
Service manual Contents
110.5.2 Fuse and relay board
L580-1170/26443~; 110-24
110.6 Electrical components in the rear section 110-30
110.6.1 Battery installation
L580-1170/26443-; 110-30
110.7 Rear area monitoring with camera 110-32
110.7.1 Overview of rear area monitoring with camera
L580-1170/26443-; 110-32
110.7.2 Camera
L580-1170/26443-; 110-33
120 Gearbox 120-1
120.1 Overview of the transmission
L580-1170/26443-; 120-2
120.2 Mechanical transmission
L580-1170/26443-; 120-4
120.3 Transmission hydraulics 120-10
120.3.1 Overview of the hydraulic control system
L580-1170/26443-; 120-10
120.3.2 Transmission gear pump
L580-1170/26443-; 120-14
120.3.3 Control valve block
L580-1170/26443-; 120-16
120.3.4 Transmission hydro accumulator
L580-1170/26443 120-17
120.4 Transmission electronics 120-18
120.41 Overview of the electronic control system
L580-1170/26443-; 120-18
120.4.2 Gear shifting solenoid valves
L580-1170/26443-; 120-20
5 120.4.3 Speed sensors
g L580-1170/26443-; 120-21
2 120.4.4 Gear oil temperature switch
g L580-1170/26443-; 120-22
5 130 Axles and drive shafts 130-1
g 130.1 Axles 130-2
ES
3 130.1.1 Axles
L580-1170/26443-; 130-2
130.2 Cardan shafts 130-8
Contents
130.2.2 Rear cardan shaft
L580-1170/26443-; 130-9
140 Steel parts of the basic machine 140-1
140.1 Vehicle frame 140-2
140.1.1 Articulation bearing
L580-1170/26443-; 140-2
140.1.2 Oscillating bearing and oscillating axle frame
L580-1170/26443-; 140-4
140.1.3 Articulation lock
L580-1170/26443-; 140-5
140.2 Ballast weight
L580-1170/26443~; 140-7
140.3 Covering 140-8
140.3.1 Covering overview
L580-1170/26443-; 140-8
140.4 Cab access
L580-1170/26443-; 140-11
150 Working attachment 150-1
150.1 Lift arms for Z kinematics 150-2
150.1.1 Overview of z-bar lift arm kinematics
L580-1170/26443-; 150-2
150.1.2 Pin bearing 160-3
150.1.2.1 Standard bearing
L580-1170/26443-; 150-3
150.1.2.2 Bucket bearing
L580-1170/26443-; 150-5
160.1.2.3 Removing the bucket bearing
L580-1170/26443-; 150-6
150.1.2.4 Installing the bucket bearing
L580-1170/26443-; 150-9
150.2 Quick coupler 160-12
150.2.1 Quick-change device (optional)
L580-1170/26443-; 150-12
150.3 Bucket
L580-1170/26443-; 150-14
150.4 Forklift
L580-1170/26443-; 150-15
LBH/11450184/17/211-20190329_110025/en
160 Operator’s cab, heating and air conditioning 160-1
160.1 Overview of the cab, heating and air conditioning unit
1L580-1170/26443-; 160-3
160.2 Display and control elements 160-6
160.2.1 Electrical components in the control panel 160-6
160.2.1.1 Overview of electrical components in the control
panel
L580-1170/26443-; 160-6
160.2.1.2 Control unit for main functions
L580-1170/26443-; 160-6
160.2.1.3 Electric control unit
L580-1170/26443-; 160-8
160.2.1.4 Starter switch
L580-1170/26443-; 160-12
160.2.2 Touch screen display
L580-1170/26443-; 160-13
160.2.3 Control lever
L580-1170/26443-; 160-15
160.3 Heating, ventilation, air conditioning 160-18
160.3.1 Heating and air conditioning unit 160-18
160.3.1.1 Heating and air conditioning unit
L580-1170/26443-; 160-18
160.3.1.2 Blower
L580-1170/26443-; 160-20
160.3.2 Heating/air conditioning electronics
L580-1170/26443-; 160-21
160.4 Air conditioning 160-23
160.4.1 Air conditioning compressor
L580-1170/26443-; 160-23
160.4.2 Condenser
L580-1170/26443-; 160-24
160.4.3 Dryer
L580-1170/26443-; 160-26
160.4.4 Air conditioning pressure switch
L580-1170/26443-; 160-27
160.4.5 Evaporator
L580-1170/26443-; 160-28
160.4.6 Anti-icing temperature sensor
L580-1170/26443- 160-29
160.4.7 Automatic air conditioning 160-29
160.4.7.1 Overview of the automatic air conditioning
L580-1170/26443-; 160-29
copyright ® Liebherr-Werk Bischofshofen GmbH 2019
1580-1170 LIEBHERR 27
Contents Service manual
160.4.7.2 Interior temperature sensor and air flow temperature
sensor
L580-1170/26443-; 160-31
160.4.7.3 Outside temperature sensor
L580-1170/26443-; 160-31
160.4.7.4 Sun sensor
L580-1170/26443-; 160-32
170 Lubrication system 170-1
170.1 Liebherr automatic central lubrication system 170-2
170.1.1 Overview of Liebherr automatic central lubrication system
L580-1170/26443-; 170-2
170.1.2 Liebherr central lubrication pump
L580-1170/26443-; 170-6
170.1.3 Progressive distributor MX-F
L580-1170/26443-; 170-10
190 Options 190-1
190.1 Diesel engine without emission type approval
L580-1170; 190-2
190.2 LIiDAT 190-3
190.2.1 Overview of LiDAT
L580-1170/26443-; 190-3
190.2.2 LiDAT on the machine
L580-1170/26443-; 190-5
190.3 Refuelling system
L580-1170/26443-; 190-9
190.4 Weighing device (Liebherr)
L580-1170/26443-; 190-12
200 Diagnosis 200-1
200.1 Malfunctions 200-2
200.1.1 Service codes in the display unit 200-2
200.1.1.2 Display of service codes 200-2
200.1.1.3 Effects of a fault 200-2
200.1.1.4 Correcting an error 200-3
200.2 Troubleshooting 200-4
200.2.1 Replacing fuses 200-4
200.2.1.1 Fuses in the engine compartment 200-4
200.2.1.2 Plug-in fuses on the relay and fuse board 200-5
VIDEO PREVIEW OF THE MANUAL:
IMAGES PREVIEW OF THE MANUAL:
PLEASE NOTE:
- This is the SAME MANUAL used by the dealerships to diagnose your vehicle
- No waiting for couriers / posts as this is a PDF manual and you can download it within 2 minutes time once you make the payment.
- Your payment is all safe and the delivery of the manual is INSTANT – You will be taken to the DOWNLOAD PAGE.
- So have no hesitations whatsoever and write to us about any queries you may have : heydownloadss @gmail.com
S.V