Liebherr L 507 1578 Wheel Loader Service Manual – PDF DOWNLOAD
FILE DETAILS:
Liebherr L 507 1578 Wheel Loader Service Manual – PDF DOWNLOAD
Language : English
Pages : 688
Downloadable : Yes
File Type : PDF
Size: 137 MB
DESCRIPTION:
Liebherr L 507 1578 Wheel Loader Service Manual – PDF DOWNLOAD
- This service manual is designed for trained specialist staff of the Liebherr organisation and their dealers.
- This service manual contains specialist knowledge for repairing Liebherr construc- tion machines. Basic specialist knowledge on electronics, hydraulics, mechanics and engine technology is not contained in this service manual. Therefore special- ized training and qualifications are necessary. Liebherr recommends participating in the Liebherr training program for construction machines.
In this service manual you will find information on:
- You will find information on controls and operation in the operator’s manual. Information on spare parts are in the spare parts catalogue. Please observe the local accident prevention laws.
- You can find information on repairs of machine parts in the service documentation under “Wheel loader – repair instructions”.
Introduction:
To ensure safe operation:
- Consult with the worksite manager about safety regulations at the place of use.
- Adhere to safety regulations at the place of use.
- Follow traffic regulations.
- Adhere to valid guidelines provided by insurers (for example, employers’ professional liability insurance companies, accident insurance, etc.).
- Avoid working methods that can endanger safety.
- Follow all intervals specified for recurrent checks and inspections as outlined in this operator’s manual.
1.2. Intended Use of Wheel Loader
The wheel loader is used to pick up, move, and dump the following materials:
- Soil
- Stones
- Broken rocks
- Bulk materials
This applies to a standard machine under normal operating conditions. Special applications are described in a separate options operator’s manual.
To ensure the intended use:
- Adhere to the operator’s manual.
- Follow maintenance intervals.
- Carry out inspection and maintenance tasks.
- Follow the specifications in the technical data.
- When using the machine on public roads, ensure it complies with applicable national regulations.
- Only lift loads with intended working attachments (fork prongs, crane boom), which must be properly fitted and functioning.
- Ensure that machines used underground (for mining and tunnel construction) are fitted with systems to reduce exhaust emissions (such as diesel particulate filters).
- Adhere to the requirements of each individual country for underground operation.
- For special uses, use special working attachments and, if necessary, special safety equipment.
- Exclusively mount and use special working attachments with approval and as per the stipulations of the manufacturer of the basic machine.
IMAGES PREVIEW OF THE MANUAL:
TABLE OF CONTENTS:
Liebherr L 507 1578 Wheel Loader Service Manual – PDF DOWNLOAD
010.1 Safety instructions 010-4
010.1.1 Information on these instructions 010-4
010.1.1.1 Representation of warning messages 010-4
010.1.1.2 Graphic symbols in these instructions 010-4
010.1.2 Intended use 010-5
010.1.2.1 Laws, rules, guidelines and safety regulations 010-5
010.1.2.2 Intended use 010-5
010.1.2.3 Foreseeable misuse 010-6
010.1.2.4 Operating conditions 010-6
010.1.2.5 Disposal 010-7
010.1.3 Description of staff 010-7
010.1.3.1 Personal protective equipment 010-7
010.1.3.2 Requirements for staff 010-8
010.1.3.3 Operator 010-8
010.1.3.4 Operator 010-9
010.1.3.5 Maintenance staff 010-9
010.1.3.6 Refrigeration technician 010-10
010.1.3.7 Slinger 010-11
010.1.3.8 Spotter 010-12
0101.4 Protective devices on the machine 010-12
010.1.4.1 Operator’s cab 010-12
010.1.4.2 Roll over protective structure (ROPS) 010-13
010.1.4.3 Falling object protective structures (FOPS) 010-13
0101.5 Emergency equipment on the machine 010-13
010.1.5.1 Emergency exit (standard) 010-13
010.1.5.2 Fire extinguisher (option) 010-14
010.1.6 Safe operation 010-14
010.1.6.1 Intoxicants 010-14
010.1.6.3 Transporting machine 010-15
010.1.6.4 Access to machine 010-15
010.1.6.5 Machine danger zone 010-16
010.1.6.6 Visibility 010-16
010.1.6.7 Protection against vibration 010-17
010.1.6.8 Operation of machine 010-18
010.1.7 Safe maintenance 010-21
010.1.7.1 Spare parts 010-21
010.1.7.2 Heavy parts 010-21
010.1.7.3 Regular checks 010-22
010.1.8 Modifications to the machine 010-22
010.1.8.1 Modifications, add-ons and retrofittings 010-22
Special tools for maintenance and repair work 010-23
010.21 Special tools, general 010-23
010.2.2 Special tools for diesel engine 010-25
010.2.3 Special tools for lift cylinders 010-26
010.2.4 Special tools for tilt cylinders 010-26
010.25 Special tools for steering wheel 010-27
010.2.6 Special tools for steering cylinders 010-27
010.2.7 Special tools for the electrical system 010-28
010.2.8 Special tools for the air conditioning system 010-29
010.2.9 Special tools for cab glazing 010-31
010.2.10 Special tools for the central lubrication system (Liebherr) 010-31
Standards and regulations 010-32
010.3.1 Prestressing forces and tightening torques for bolts with metric
standard and fine threads as per DIN ISO 261 010-32
010.3.1.1 Range of application and purpose 010-32
010.3.1.2 Other applicable documents 010-32
010.3.1.3 Modifications and descriptions 010-33
010.3.1.4 Tightening torques 010-33
010.3.2 Liebherr standards for assembly instructions and tightening torques010-39
Preservation guidelines 010-40
010.4.1 General information 010-40
010.4.2 Machine out of service for an unknown period of time 010-40
010.4.3.1 Out of service for up to 2 months 010-41
010.4.3.2 Out of service for up to 12 months 010-42
010.4.3.3 Out of service for longer than 12 months 010-43
010.44 Putting back into service 010-43
010.4.4.1 After being out of service for 2 months 010-43
010.44.2 After being out of service for 12 months 010-44
010.4.4.3 After being out of service for longer than 12 months 010-44
020 Technical data 020-1
020.1 Overall machine 020-4
020.1.1 Complete machine with bucket (z-bar kinematics)
L507-1578; 020-4
0201.2 Working attachment: light material bucket
L507-1578; 020-5
020.1.3 Working attachment: 4 in 1 bucket
L507-1578; 020-6
020.1.4 Working attachment: forklift
L507-1578; 020-8
020.2 Drive group 020-10
020.2.1 Diesel engine
L507-1578/0-53994; 020-10
0202.2 Diesel engine
L507-1578/53995-; 020-11
0202.3 Fuel tank
L507-1578; 020-12
020.24 Fuel level sensor
L507-1578; 020-13
020.3 Cooling system 020-14
020.3.1 Fan pump
L507-1578; 020-14
020.3.2 Fan motor
L507-1578; 020-14
020.3.3 Hydraulic oil temperature sensor B8
L507-1578; 020-14
020.4 Working hydraulics 020-15
0204.1 Working pump
L507-1578; 020-15
0204.2 Control block
L507-1578; 020-15
020.4.4 Pilot control hydro accumulator
020.4.5 Stabilisation module
020.4.6 Ride control hydro accumulator
020.4.7 Lift cylinder
020.4.8 Tilt cylinder
020.49 Working pump
Travel hydraulics 020-18
020.5.1 Travel pump
020.5.2 Travel pump high pressure sensor B45
020.5.3 Travel motor
Hydraulic components 020-20
020.6.1 Return suction filter
020.6.2 Breather filter with filler strainer
Steering system 020-21
020.7.1 Servostat
020.7.2 Steering cylinder
Brake system 020-22
020.8.1 Drum brake
020.8.2 Inch/brake unit
020.8.3 Brake light pressure switch B12
020.8.4 Spring accumulator cylinder for parking brake
Electrical system 020-24
020.9.1 Central control unit (Master 4)
020.9.3 Battery
L507-1578; 020-24
0209.4 Voltage transformer
L507-1578; 020-25
020.10 Gearbox 020-26
020.10.1 Transmission
L507-1578; 020-26
020.11 Axles and drive shafts 020-27
020.11.1 Front axle
L507-1578; 020-27
020.11.2 Rear axle
L507-1578; 020-27
020.11.3 Drive shaft
L507-1578; 020-27
020.114 Tyres
L507-1578; 020-27
020.11.4.2 Special tyres 020-29
020.12 Working attachment 020-30
020.12.1 Quick coupler locking hydraulic cylinder
L507-1578; 020-30
020.13 Operator’s cab, heating and air conditioning 020-31
020.13.1 Dryer
L507-1578; 020-31
020.13.2 Pressure switches
L507-1578; 020-31
020.14 Lubrication system 020-32
020.14.1 Central lubrication pump EP1
L507-1578; 020-32
020.14.2 Progressive distributor
L507-1578; 020-32
020.14.2.1 MX-F 020-32
020.14.22 MX-F25 020-32
020.14.2.3 MX-F 45 020-32
020.1424 MX-F75 020-33
020.14.2.5 MX-F105 020-33
030 Maintenance 030-1
030.1 Maintenance and inspection schedule 030-9
030.2 Filling quantities and lubrication chart 030-1
030.22 Recommended operating fluids
030.3.2 General information on changing lubricants and fuels 030-16
030.3.3 Converting hydraulic system from mineral oils to biodegradable
030.3.4 Diesel fuels
030.3.5 Engine oils
030.3.6 Refrigerant
030.3.7 Coolant
030.3.8 Hydraulic oil
030.3.9 Transmission
030.3.10 Axle oil
L507-1578; 030-21
030.3.10.1 Liebherr recommendation 030-21
030.3.10.2 Minimum quality requirement 030-22
030.3.11 Brake oil
L507-1578; 030-22
030.3.11.1 Liebherr recommendation 030-22
030.3.12 Lubrication grease
L507-1578; 030-22
030.3.12.1 Liebherr recommendation 030-22
030.3.12.2 Minimum quality requirement 030-22
030.4 Maintenance tasks 030-24
0304.1 Safety precautions
L507-1578; 030-24
0304.2 Preparatory tasks for maintenance 030-24
030.4.2.1 Maintenance positions
L507-1578; 030-25
030.42.2 Opening service hatches
L 507-1578; 030-26
030.4.2.3 Turning off battery main switch
L507-1578; 030-27
0304.3 Overall machine 030-28
030.4.3.1 Checking machine is in proper condition
L507-1578; 030-28
030.4.3.2 Removing loose parts, dirt, ice and snow from
machine
L507-1578; 030-30
030.4.3.3 Cleaning machine
L507-1578; 030-30
030.4.3.4 Replacing VCI capsules
L507-1578; 030-33
030.4.3.5 Oil analyses
L507-1578; 030-36
030.44 Drive group 030-43
030.44.1 Checking diesel engine oil level
L507-1578; 030-43
030.4.4.2 Diesel engine: changing diesel engine oil
L 507-1578; 030-44
030.4.4.3 Diesel engine: changing oil filter
L507-1578; 030-46
030.4.4.4 Diesel engine: checking V-belt
L507-1578; 030-48
030.4.4.5 Diesel engine: changing V-belt
L507-1578; 030-50
0304.4.6 Checking diesel engine valve clearance
L507-1578; 030-51
0304.47 Draining condensate and sediment from the fuel tank
L507-1578; 030-55
0304.4.8 Draining off condensate from fuel pre-filter
L507-1578; 030-56
030.4.4.9 Changing fuel pre-filter element
L507-1578; 030-57
030.4.4.10 Changing fuel fine filter element
L507-1578; 030-58
030.4.4.11 Cleaning service cover and dust discharge valve of
air filter system
L507-1578; 030-59
030.4.4.12 Checking air filter vacuum switch function
L507-1578; 030-61
030.4.4.13 Cleaning or changing main element of air filter
system
L507-1578; 030-62
030.4.4.14 Changing safety element of air filter system
L507-1578; 030-64
030.4.4.15 Checking that diesel engine intake and exhaust
system is in good condition and not loose or leaking
L507-1578; 030-65
030.4.4.16 Cleaning or changing diesel particulate filter
L507-1578; 030-68
030.4.5 Cooling system 030-74
030.4.5.1 Checking coolant level in cooling system
L507-1578; 030-74
030.4.5.2 Checking coolant antifreeze and corrosion inhibitor
concentration
L507-1578; 030-76
0304.53 Cleaning cooling system
L507-1578; 030-83
0304.54 Changing coolant in cooling system
L507-1578; 030-84
030.46 Working hydraulics 030-87
030.4.6.1 Cleaning and lubricating the pilot control unit
L507-1578; 030-87
030.4.7 Hydraulic components 030-87
030.4.7.1 Checking oil level in hydraulic tank
L507-1578; 030-8
tank
L 507-1578; 030-89
030.4.7.3 Changing the hydraulic tank return suction filter
cartridge
L507-1578; 030-90
030.4.7.4 Changing the hydraulic tank breather filter
1507-1578; 030-92
030.4.7.5 Hydraulic tank: analysing oil
L507-1578; 030-92
030.4.7.6 Hydraulic tank: changing oil
1507-1578; 030-94
030.4.8 Steering system 030-96
030.4.8.1 Steering: Checking the function
1507-1578; 030-96
030.4.8.2 Lubricating steering cylinder bearing
1507-1578; 030-96
030.4.9 Brake system 030-97
030.4.9.1 Testing service brake and parking brake
1507-1578; 030-97
030.4.9.2 Checking the oil level in the brake system
L507-1578; 030-99
030.4.9.3 Checking the gap and wear on the service brake
linings
L507-1578; 030-100
0304.10 Electrical system 030-104
030.4.10.1 Checking function of lighting and horn
L507-1578; 030-104
030.4.10.2 Checking battery fluid levels and terminals
L507-1578; 030-105
030.4.10.3 Control lever: Change the travel direction switch
rocker and cap.
L507-1578; 030-107
030.4.11 Gearbox 030-110
030.4.11.1 Transmission: checking oil level
L507-1578; 030-110
030.4.11.2 Changing transmission oil
L507-1578; 030-110
0304.12 Axes and drive shafts 030-112
030.4.12.1 Checking axle oil levels
1507-1578; 030-112
030.4.12.2 Changing axle oil
L507-1578; 030-114
copyright ® Liebherr-Werk Bischofshofen GmbH 2019
L507-1578 LIEBHERR 13
Contents Service manual
030.4.12.3 Lubricating rear axle kingpin bearings
L507-1578; 030-116
0304.124 Checking fitting of rear axle kingpin bearings and
steering rod taper connections
L507-1578; 030-117
0304.12.5 Checking tightening torque of front axle fastening
bolts
L507-1578; 030-118
030.4.12.6 Checking and lubricating drive shaft
L507-1578; 030-119
030.4.12.7 Checking the tyre pressure
L507-1578; 030-120
030.4.12.8 Checking wheel tightness
L507-1578; 030-120
030.4.13 Steel parts of the basic machine 030-121
030.4.13.1 Lubricating articulated bearing
L507-1578; 030-121
030.4.13.2 Lubricating articulation stops
L507-1578; 030-122
030.4.13.3 Lubricating the moving parts of the engine bonnet
with penetrating oil
L507-1578; 030-122
030.4.13.4 Cleaning and maintaining seals of service hatches
L507-1578; 030-123
030.4.14 Working attachment 030-123
030.4.14.1 Lubricating lift arms and working attachment
L507-1578; 030-123
030.4.14.2 Checking lift arm bucket bearing bushings
L507-1578; 030-124
030.4.14.3 Checking the lift arm bucket stops
L507-1578; 030-125
030.4.14.4 Testing quick coupler
L507-1578; 030-126
030.4.15 Operator’s cab, heating and air conditioning 030-127
030.4.15.1 Cleaning operator’s cab air filter
L507-1578; 030-127
030.4.15.2 Changing operator’s cab air filter
L507-1578; 030-127
030.4.15.3 Safety belt: checking condition and function
L507-1578; 030-128
030.4.15.4 Testing the windscreen washer system
L507-1578; 030-129
030.4.15.5 Filling windscreen washer fluid in windscreen washer
system
tor’s cab with penetrating oil
L 507-1578; 030-130
030.4.15.7 Cleaning and maintaining seals of operator’s cab
1507-1578; 030-130
030.4.15.8 Air conditioning: checking V-belt
L507-1578; 030-131
030.4.15.9 Air conditioning: changing V-belt
1507-1578; 030-133
030.4.15.10 Checking the indicator bead in the air conditioning
dryer-collector unit
1507-1578; 030-135
030.4.15.11 Heating and air conditioning unit: Testing function
L507-1578; 030-136
0304.16 Lubrication system 030-137
030.4.16.1 Checking the level in the grease reservoir of the
central lubrication system
1507-1578; 030-137
030.4.16.2 Central lubrication system: Checking the pipes,
hoses and lubrication points for leaks and damage
L507-1578; 030-138
030.4.16.3 Central lubrication system: Checking the lubrication
of the bearings
L 507-1578; 030-139
030.5 Testing and adjustment checklist
L507-1578; 030-140
030.6 Testing and adjustment tasks 030-144
0306.1 Safety precautions
L507-1578; 030-144
030.6.2 Overall machine 030-144
030.6.2.1 Preparing for adjustment procedures
L507-1578; 030-144
030.6.2.2 Hydraulic oil and coolant: operating temperature
1507-1578; 030-146
0306.3 Drive group 030-147
030.6.3.1 Pedals: calibration
1507-1578; 030-147
030.6.3.2 Diesel engine speed
L507-1578; 030-148
030.6.3.3 Reading the diesel engine service files
L507-1578; 030-149
030.6.3.4 Performing a service regeneration on diesel particu-
L507-1578; 030-151
Cooling system 030-162
030.6.4.1 Fan motor: fan speed proportional solenoid
Working hydraulics 030-165
030.6.5.1 Control valve block: secondary pressure relief valves
030.6.5.2 Control valve block: primary pressure relief valve
030.6.5.3 Control block: reduction of tilt-out speed (option)
030.6.5.4 Stabilisation module (option), safety valve
030.6.5.5 Ride control hydro accumulator (option): nitrogen
Hydraulic components 030-174
030.6.6.1 Checking the hydraulic lines for damage
Travel hydraulics 030-179
030.6.7.1 Travel pump high pressure sensor B102: Deviation
030.6.7.2 Travel pump replenishing pressure relief valve
030.6.7.3 Travel pump: high pressure relief valves
030.6.7.4 Travel pump: pressure cut-off
030.6.7.5 Travel pump: manual block curve calibration (up to
030.6.7.6 Travel pump: manual block curve calibration (from
030.6.7.7 Travel pump: automatic block curve calibration (from
030.6.7.8 Travel motor: manual calibration (maximum swivel
Brake system 030-193
030.6.8.1 Inching brake pedal: basic setting
setting
L 507-1578; 030-195
030.6.9 Electrical system 030-196
030.6.9.1 Central control unit (Master4) Creating a Servicefile
L507-1578; 030-196
030.6.9.2 Updating the central controller software
L507-1578; 030-199
030.6.9.3 Setting the IP addresses of the central control unit
(Master4)
L507-1578; 030-201
030.6.9.4 Resetting the central control unit (Master4)
L507-1578; 030-204
030.6.9.5 Addressing CAN module and checking system infor-
mation
L507-1578; 030-205
030.6.10 Axles and drive shafts 030-207
030.6.10.1 Tyres: setting radius
L507-1578; 030-207
040 Drive group 040-1
040.1 Engine 040-2
040.1.1 Diesel engine overview
L507-1578; 040-2
0401.2 Electrical components of diesel engine
L507-1578; 040-10
040.1.3 Fuel system 040-11
040.1.3.1 Overview of fuel system
L507-1578; 040-12
040.1.3.2 Fuel level sensor
L507-1578; 040-14
040.1.3.3 Fuel pre-filter
L507-1578; 040-15
040.1.3.4 Fuel fine filter
L507-1578; 040-16
040.14 Air filter system 040-17
040.1.4.1 Air filter
L507-1578; 040-17
040.1.4.2 Vacuum switch for air filter
L 507-1578; 040-18
040.1.5 Exhaust system 040-18
040.1.5.1 Overview of diesel particulate filter
L507-1578; 040-19
copyright ® Liebherr-Werk Bischofshofen GmbH 2019
L507-1578 LIEBHERR 17
Contents Service manual
050 Cooling system 050-1
050.1 Overview of cooling system
L507-1578; 050-2
050.2 Cooling system hydraulics 050-3
050.2.1 Overview of cooling system hydraulics
L507-1578; 050-3
050.2.2 Fan pump
L507-1578; 050-6
050.2.3 Fan motor
L 507-1578; 050-7
050.3 Cooling system electronics 050-9
050.3.1 General overview of electronic control system
L507-1578; 050-9
050.3.2 Hydraulic oil temperature sensor
L507-1578; 050-12
050.4 Cooler 050-14
050.4.1 Cooler unit
L507-1578; 050-14
050.5 Reversible fan drive 050-15
050.5.1 Overview of reversible fan drive
L507-1578; 050-15
050.5.2 Fan reversal valve block
1507-1578; 050-18
060 Working hydraulics 060-1
060.1 Overview of working hydraulics
L507-1578; 060-3
060.2 Working pump
L507-1578; 060-9
060.3 Control block
L507-1578; 060-12
060.4 Pilot control 060-20
060.4.1 Overview of pilot control unit
1507-1578; 060-20
060.4.2 Pilot control unit
L507-1578; 060-24
060.4.3 Pilot pressure for solenoid valve
L507-1578; 060-26
060.5 Ride control 060-28
060.5.1 Overview of ride control system
L507-1578; 060-28
060.5.2 Stabilisation module
1507-1578; 060-32
copyright ® Liebher-Werk Bischofshofen GmbH 2019
18 LIEBHERR L507-1578
Service manual
060.6.1 Regulated flow rate: total overview
L507-1578; 060-37
0606.2 Valve block for regulated flow rate
L507-1578; 060-39
060.7 Pipe break protection 060-41
060.7.1 Pipe break protection: overview
L507-1578; 060-41
060.7.2 Valve block for pipe break protection
L507-1578; 060-43
060.7.3 Solenoid valve for release of the ride control
L507-1578; 060-44
060.8 High flow 060-46
060.8.1 High Flow: total overview
L507-1578; 060-46
060.8.2 High Flow pump
L507-1578; 060-49
060.8.3 Solenoid valve for High Flow
L507-1578; 060-50
070 Travel hydraulics 070-1
070.1 Overview of travel hydraulics
L507-1578; 070-2
070.2 Travel pump
L507-1578; 070-8
070.3 Travel motors 070-24
070.3.1 Travel motor
L507-1578; 070-24
080 Hydraulic components 080-1
080.1 Hydraulic system: overview
L507-1578; 080-2
g 080.2 Hydraulic tank 080-4
g 080.2.1 Overview of the hydraulic tank
8 L507-1578; 080-4
§ 080.2.2 Return suction filter
g L507-1578; 080-6
3 080.2.3 Breather filter
8 L507-1578; 080-12
E
090 Steering system 090-1
090.1 Steering system overview
Brake system 100-1
100.1 Overview of brake system
100.2 Service brake and parking brake 100-6
100.3 Service brake 100-11
100.3.1 Inch/brake unit
1507-1578; 100-11
100.3.2 Inching function angle sensor
L507-1578; 100-12
100.3.3 Brake light pressure switch
1507-1578; 100-14
100.4 Parking brake 100-16
100.4.1 Parking brake solenoid valve
L507-1578; 100-16
100.4.2 Spring accumulator cylinder for parking brake
1507-1578; 100-17
Electrical system 110-1
110.1 Overview of electrical system
110.2 Lighting
110.3 Circuit diagrams
110.4 Electronic control unit 110-9
L507-1578; 110-15
110.4.3.2 Compact module
L507-1578; 110-16
110.5 Electrical components of the driver’s cab 110-22
110.5.1 Fuse boards
L507-1578; 110-22
LBH/M2234433/06/211-20190801_065845/en
L507-1578; 110-24
110.6 Electrical components in the rear section 110-25
110.6.1 Battery installation
L507-1578; 110-25
120 Gearbox 120-1
120.1 Overview of transmission
L507-1578; 120-2
120.2 Transmission electronics 120-3
120.2.1 Output speed sensor
L507-1578; 120-3
130 Axles and drive shafts 130-1
130.1 Axles 130-2
130.1.1 Front axle
L507-1578; 130-2
130.1.2 Rear axle
L507-1578; 130-4
130.2 Cardan shafts 130-6
130.2.1 Drive shaft
L507-1578; 130-6
140 Steel parts of the basic machine 140-1
140.1 Vehicle frame 140-2
140.1.1 Articulation bearing
L507-1578; 140-2
140.1.2 Articulation lock
L507-1578; 140-3
150 Working attachment 150-1
1560.1 Lift arms for Z kinematics 150-2
160.1.1 Lift arms for Z kinematics
L507-1578; 150-2
150.2 Quick coupler 150-4
150.2.1 Quick coupler
L507-1578; 150-4
160.2.2 Quick coupler hydraulics 150-5
150.2.2.1 Overview of quick coupler hydraulics
L507-1578; 150-6
150.2.2.2 Open solenoid valve for quick coupler
L507-1578; 150-8
copyright ® Liebherr-Werk Bischofshofen GmbH 2019
L507-1578 LIEBHERR 2
Contents
160.1 Overview of operator’s cab, heating and air conditioning unit
L507-1578; 160-2
160.2 Display and control elements 160-4
160.2.1 Display
L507-1578; 160-4
160.2.2 Control lever
L507-1578; 160-4
160.2.3 Accelerator pedal
1507-1578; 160-6
160.3 Heating, ventilation, air conditioning 160-8
160.3.1 Overview of heating, ventilation and air conditioning system
L507-1578; 160-8
160.3.2 Heating and air conditioning unit 160-14
160.3.2.1 Heating and air conditioning unit
L507-1578; 160-14
160.3.2.2 Blower
L507-1578; 160-17
160.4 Air conditioning 160-18
160.4.1 Air conditioning (optional)
1507-1578; 160-18
160.42 Compressor magnetic coupling
1507-1578; 160-19
160.4.3 Air conditioning condenser
L507-1578; 160-21
160.4.4 Dryer-collector unit
1507-1578; 160-21
160.4.5 Air conditioning pressure switch
L507-1578; 160-23
170 Lubrication system 170-1
170.1 Liebherr automatic central lubrication system 170-2
170.1.1 Automatic central lubrication system: overview
1507-1578; 170-2
170.1.2 Central lubrication pump EP-1
L507-1578; 170-6
170.1.3 Progressive distributor MX-F
L507-1578; 170-9
190 Options 190-1
190.1 LIDAT 190-2
190.1.2 LiDAT on machine
200 Diagnosis 200-1
200.1 Malfunctions 200-2
200.1.1 Warning symbols 200-2
200.1.2 Warning symbols 200-2
200.1.3 Service code indicator in display 200-3
200.2 Troubleshooting 200-6
200.2.1 Replacing fuses 200-6
200.2.1.1 Fuses on the fuse board in the cab 200-6
200.2.1.2 Fuses in right of engine compartment 200-9
VIDEO PREVIEW OF THE MANUAL:
PLEASE NOTE:
- This is the SAME exact manual used by your dealers to fix your vehicle.
- The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
- Any queries / doubts regarding your purchase, please feel free to contact [email protected]
S.V