Laverda EU Harvesting Cutting Table PowerFlow Operator’s Manual – PDF DOWNLOAD
FILE DETAILS:
Laverda EU Harvesting Cutting Table PowerFlow Operator’s Manual – PDF DOWNLOAD
Language : English
Pages : 78
Downloadable : Yes
File Type : PDF
Size: 21.8 MB
TABLE OF CONTENTS:
Laverda EU Harvesting Cutting Table PowerFlow Operator’s Manual – PDF DOWNLOAD
1 General Information 5
1 1 Dear Customer 7
1 1 1 Appropriate use 7
1 1 2 Changes and improvements 7
1 1 3 Preface 7
1 1 4 EC declaration of conformity for table 8
1 1 5 Product identification 11
1 1 6 Sectional drawing and parts identification 11
1 2 Safety 13
1 2 1 General safety precautions 13
1 2 2 Attention – Warning Symbols 13
1 2 3 Safety precautions 13
1 2 4 Additional safety precautions 14
1 2 5 Before Start 15
1 2 6 Road transport 16
1 2 7 CE Marking and Type Plate on the Table 16
1 2 8 Warning/Instruction decals 19
1 2 9 Position of CE Markings and Type Plate 20
2 Operation and Adjustment 23
2 1 Safety precautions 25
2 1 1 Safety Precautions, Cutting Tables 25
2 2 Attachment/Removal of Table 26
2 2 1 General 26
2 2 2 Attachment of Table, Standard and Auto Level 26
2 2 3 Removal of Table 29
2 2 4 Supports 31
2 3 Table trailer 32
2 3 1 General 32
2 3 2 Attachment of Combine and Trailer 32
2 3 3 Table Trailer Brakes 33
2 4 Auto Level Table 34
2 4 1 Principle of Auto Level Table 34
2 5 Potentiometer for automatic cutting height control 35
2 5 1 Adjustment of potentiometer for automatic cutting height control 35
2 6 Reel 37
2 6 1 Safety stop for reel 37
2 6 2 Reel Adjustment Up/Down, Fore/Aft 38
2 6 3 Bleeding 39
2 6 4 Reel Rotation 39
2 6 5 Reel tine bars 40
2 6 6 Adjustment of the Reel in the Table 40
2 7 Knife 41
2 7 1 Knife and knife drive 41
2 8 Feeding 42
2 8 1 Table auger 42
2 8 2 Cut-off strip and distribution strip 43
2 8 3 Replacement of Feathering Fingers 44
2 8 4 Auger Flight Extensions, 20-22-25-30′ Tables 44
2 8 5 Reversing 44
2 9 Transmission 45
2 9 1 General 45
2 9 2 PowerFlow table, knife drive and table auger 45
PowerF/ow Cutting Table – EAME
2 9 3 Slip Clutch for Table Auger 46
2 9 4 Transmission diagram, left-hand side 46
2 9 5 Transmission diagram, right-hand side 47
2 10 PowerFlow belts 48
2 10 1 PowerFlow belts 48
2 10 2 Inspection and Start-Up of Powerflow Belts 48
2 10 3 Adjustment of belts 49
2 10 4 Cleaning 49
2 10 5 Table Bottom 50
2 11 Scrapers 51
2 11 1 Scrapers, front 51
2 11 2 Scrapers, Rear, and Adjustment of Bearing Housings 51
2 12 Crop lifters 52
2 12 1 Using Crop Lifters 52
2 13 Vertical Knives, Rape Auger and Straw Dividers 53
2 13 1 Vertical knife 53
2 13 2 Mounting of Vertical Knife 53
2 13 3 Rape Auger 54
2 13 4 Folding torpedo dividers and bow dividers 54
2 13 5 Mounting of Straw Dividers 55
2 13 6 Adjustment of Torpedo Divider 55
2 14 Fixed Table Auger Fingers 56
2 14 1 Fitting of fixed table auger fingers 56
2 14 2 Using Fixed Table Auger Fingers 56
2 15 High Table Sides 57
2 15 1 High Table Sides 57
2 16 Hydraulics 58
2 16 1 Reel adjustment fore/aft – up/down 58
3 Lubrication and Maintenance 59
3 1 Lubrication Intervals 61
3 1 1 Lubrication chart, time intervals 61
3 1 2 Lubrication chart, right- and left-hand sides 61
3 1 3 Lubrication points, left-hand side 62
3 1 4 Lubrication points, right-hand side 65
3 1 5 Lubricants 67
3 2 Maintenance 68
3 2 1 Maintenance required 68
4 Storage 69
4 1 Storage 71
4 1 1 General 71
4 1 2 After harvest 71
4 1 3 Before the start of the new season 71
5 Specifications 73
5 1 Specifications 75
5 1 1 Technical specifications 75
Alphabetical index 77
DESCRIPTION:
Laverda EU Harvesting Cutting Table PowerFlow Operator’s Manual – PDF DOWNLOAD
Dear Customer:
1.1.1 Appropriate use
This cutting table is manufactured exclusively for usual agricultural purposes (appropriate use).
Any other use is considered as being contrary to the appropriate use. AGCO declines all liability in cases of
physical damage or injuries resulting from non-appropriate use. The risk lies exclusively with the user.
The conformity and strict adherence to the operating, maintenance and repair requirements specified by
AGCO are also essential factors for appropriate use.
This table may be used, serviced and repaired only by personnel having full knowledge of its specific features
and who are aware of the danger involved and the applicable safety rules (prevention of accidents).
It is the responsibility of the owner/user to ensure that prescribed safety precautions and other general technical,
health and safety and road-safety rules are observed.
AGCO disclaims all liability to any claim resulting from the fitting of non-approved parts or accessories or unauthorised
modification or alteration.
Customers are strongly recommended to contact an AGCO dealer in the event of after-sale problems and for
any adjustments that may be necessary.
1.1.2 Changes and improvements
In accordance with the Company’s policy of continuous improvements to its products, alterations in the specifications
may be made at any time without notice.
The Company accepts no responsibility for any discrepancies which may occur between the specifications
of its tables and the descriptions thereof contained in its publications.
1.1.3 Preface
This manual
The purpose of this manual is to enable the owner/operator to handle and maintain the table efficiently. Time
spent in becoming familiar with the Operator’s Manual now will save time in the field .
Wide variations in operating conditions make it impossible for the Company to make comprehensive or definite
statements in its publications concerning performance and the use of its tables, or to accept liability for
any damage which may result from errors or omissions.
The specifications and illustrations contained in this book pertain to tables manufactured for specific countries.
Due to differing laws and requirements in various countries, some apparent discrepancies may result
between any particular table and those depicted in this book. Some accessories and optional equipment appearing
in this book are not necessarily available in all territories.
Please see the operator’s manual for the combine for further details on the interdependence between combine
and table.
Technical specifications, dimensions and weights are without any obligation.
Right to change technical specifications and equipment reserved.
Front, rear, RH and LH are always seen in the travelling direction.
IMAGES PREVIEW OF THE MANUAL:
VIDEO PREVIEW OF THE MANUAL:
PLEASE NOTE:
- This is the SAME manual used by the dealers to troubleshoot any faults in your vehicle. This can be yours in 2 minutes after the payment is made.
- Contact us at [email protected] should you have any queries before your purchase or that you need any other service / repair / parts operators manual.
S.V
