Kymco MX ER 50 Service Manual – PDF DOWNLOAD
FILE DETAILS:
Kymco MX ER 50 Service Manual – PDF DOWNLOAD
Language : English
Pages : 213
Downloadable : Yes
File Type : PDF
IMAGES PREVIEW OF THE MANUAL:
TABLE OF CONTENTS:
Kymco MX ER 50 Service Manual – PDF DOWNLOAD
GENERAL INFORMATION 1
FRAME COVERS/EXHAUST MUFFLER 2
INSPECTION/ADJUSTMENT 3
LUBRICATION SYSTEM 4
FUEL SYSTEM 5
ENGINE REMOVAL/INSTALLATION 6
CYLINDER HEAD/CYLINDER/PISTON 7
A.C.GENERATOR 8
KICK STARTER/DRIVE PULLEY/CLUTCH/FRIVEN PULLEY 9
FINAL REDUCTION/TRANSMISSION SYSTEM 10
CRANKCASE/CRANKSHAFT 11
FRONT WHEEL/FRONT BRAKE/ FRONT SUSPENSION/STEERING SYSTEM 12
REAR WHEEL /SWING ARM/HYDRAULIC BRAKE 13
BATTERY/CHARGING SYSTEM/A.C. GENERATOR 14
IGNITION SYSTEM 15
STARTING SYSTEM 16
LIGHTS/SWITCHES 17
ONLY ATVON ROAD AVAILABLE 18
DESCRIPTION:
Kymco MX ER 50 Service Manual – PDF DOWNLOAD
PREFACE:
- This Service Manual describes the technical features and servicing procedures for the KYMCO MX’er 50.
- Section 1 contains the precautions for all operations stated in this manual. Read them carefully before starting any operation.
- Section 2 is the removal/installation procedures for the frame covers which are subject to higher removal/installation frequency during maintenance and servicing operations.
- Section 3 describes the inspection/ adjustment procedures, safety rules and service information for each part, starting from periodic maintenance.
- Sections 4 through 17 give instructions for disassembly, assembly and inspection of engine, chassis frame and electrical equipment.
- Most sections start with an assembly or system illustration and troubleshooting for the section. The subsequent pages give detailed procedures for the section.
GENERAL INFORMATION:
- Apply or add designated greases and lubricants to the specified lubrication points. n After reassembly, check all parts for proper tightening and operation.
- When two persons work together, pay attention to the mutual working safety.
- Disconnect the battery negative (-) terminal before operation.
- When using a spanner or other tools, make sure not to damage the motorcycle surface.
- After operation, check all connecting points, fasteners, and lines for proper connection and installation.
- When connecting the battery, the positive (+) terminal must be connected first.
- After connection, apply grease to the battery terminals.
- Terminal caps shall be installed securely.
G.B 15/03/25
