Fella RAMOS SM 401 Trans-KC I SM 401 Trans-RC Disc Mower Operator’s Manual – PDF DOWNLOAD
FILE DETAILS:
Fella RAMOS SM 401 Trans-KC I SM 401 Trans-RC Disc Mower Operator’s Manual – PDF DOWNLOAD
Language : English
Pages : 72
Downloadable : Yes
File Type : PDF
DESCRIPTION:
Fella RAMOS SM 401 Trans-KC I SM 401 Trans-RC Disc Mower Operator’s Manual – PDF DOWNLOAD
Introduction:
- These operating instructions for the SM 401 Trans disc mower contain detailed instructions and
information regarding safe use, maintenance, special precautions and any special equipment that is
available. - As a result of continuous further development of the machines, all technical data, figures and
photos in these operating instructions are non-binding and we reserve the right to make changes. No
alteration service is offered for these
operating instructions.
Safety:
2.1 Intended use:
The disc mower is used to cut stalks that grow at ground level. For this, the machine must be in
the working position. This machine has been constructed exclusively for normal use with
agricultural or similar tasks.
Any other use beyond this is considered improper. The manufacturer accepts no responsibility for
any damage caused by improper use. The user alone is responsible for this.
“Proper use” includes:
• Paying attention to all of the information on how to use the machine in the operating
instructions,
• Taking all warnings into account and
• Carrying out all inspections and maintenance work as instructed when
they are due.
IMAGES PREVIEW OF THE MANUAL:
TABLE OF CONTENTS:
Fella RAMOS SM 401 Trans-KC I SM 401 Trans-RC Disc Mower Operator’s Manual – PDF DOWNLOAD
1 Introduction
2 Safety
2.1 Intended use
2.2 Reasonably foreseeable misuse
2.3 Warranty and liability
2.4 User qualifications
2.5 Warnings and symbols
2.6 Warning notices on the machine
2. 7 Safety instructions
2. 7 .1 General safety instructions
2.7.2 Special safety instructions
Machine description
Product features
Notices on the machine
Special equipment
Machine components
Specifications
Machine data
Noise information
Axle loads, gross weight and minimum ballast required
Before initial operation
Assembling the machine
Adjusting the drive shaft
Attachment to the tractor
Initial operation
Adjusting the lower links
Coupling the machine
Connecting the drive shaft to the tractor
Connect hydraulics
Connecting the lighting
Pull cable
Transport position and working position
Switching the machine to transport position
Switching the machine to working position
Using the machine
Settings
Switching over from working position to edge-mowing position or vice versa
Adjusting cutting height
9.3 Adjusting the ground contact pressure
9.4 Adjusting the tine rotor conditioner (KC)
9.4.1 Adjusting the conditioner intensity
9.4.2 Adjusting the swath guiding assembly
9.5 Adjusting conditioners with rubber rollers (RC)
9.5.1 Adjusting the conditioner intensity
9.5.2 Adjusting the swath guiding assembly
10 Optional functions
10.1 Greater cutting height using anti-wear skids
10.2 Swath guiding disc
10.3 KC spreader
11 Machine storage
12 Rectifying faults
12.1 If the machine runs over an obstacle
12.2 Adjusting the impact guard
12.3 Replacing driveGUARD
12.3.1 Preparatory work
12.3.2 Mower disc without feed drum
12.3.3 Mower disc with feed drum
12.3.4 Checks after replacing a driveGUARD element
12.4 Overload protection system for the conditioner
12.5 Blockages at the conditioner
13 Maintenance
13.1 Maintenance intervals
13.2 Accessing the maintenance points
13.3 Cleaning
13.4 Tightening torques for nuts and bolts
13.5 Adhesive notices on the machine
13.6 Drive shaft
13. 7 Hydraulic system
13.8 Gearbox
13.8.1 Angular pivoting gearbox
13.8.2 Entry gearbox and cutter bar
13.9 Cutter blades
13.9.1 Checking the cutter blades
13.9.2 Checking the cutter-blade bolt
13.9.3 Replacing the cutter blades and/or cutter-blade bolt
13.9.4 Optional for a retrofitted quick-change blade system
13.10 Check the protective sheets
13.11 Lubrication instruction
14 Index
PLEASE NOTE:
- This is the SAME exact manual used by your dealers to fix your vehicle.
- The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
- Any queries / doubts regarding your purchase, please feel free to contact [email protected]
S.V