Fella Juras TS 12545 PRO Rotary Rake Operator’s Manual – PDF DOWNLOAD

Description

Fella Juras TS 12545 PRO Rotary Rake Operator’s Manual – PDF DOWNLOAD

FILE DETAILS:

Fella Juras TS 12545 PRO Rotary Rake Operator’s Manual – PDF DOWNLOAD

Language : English
Pages : 76
Downloadable : Yes
File Type : PDF

DESCRIPTION:

Fella Juras TS 12545 PRO Rotary Rake Operator’s Manual – PDF DOWNLOAD

Introduction:

These operating instructions for the TS 12545 PRO rotor rake contain detailed instructions and information regarding safe use, maintenance, special precautions and any special equipment that is available.

• As a result of continuous further development of the machines, all technical data, illustrations and photos in this Operator’s Manual are non-binding and we reserve the right to make changes. No alteration service is offered for this Operator’s Manual.
• Read the Operator’s Manual carefully before switching on or using the machine for the first time. The Operator’s Manual helps familiarize the user with the machine’s operation and provides details about function and maintenance.
• The Operator’s Manual must be available to the user at all times and must be within reach, close to the machine.
• The information regarding maintenance and operational safety that is provided in the Operator’s Manual must be observed and complied with. In order to visualize it better, safety equipment and covers have been removed or opened in some of the illustrations or photos featured in this Operator’s Manual.

IMAGES PREVIEW OF THE MANUAL:

TABLE OF CONTENTS:

Fella Juras TS 12545 PRO Rotary Rake Operator’s Manual – PDF DOWNLOAD

1 Introduction 5
1.1 Warranty and liability 5
1.2 Conventions 5
1.2.1 Illustrations 5
1.2.2 Pictograms used 5
1.2.3 Text symbols 5
1.2.4 Abbreviations 5
1.3 Other applicable documentation 5
1.4 Storage of documentation 6
1.5 Applicability of the Operator’s Manual 6
1.6 Sign plate and serial number 6
1.7 EU Declaration of Conformity 7
2 Safety 8
2.1 Intended use 8
2.2 Reasonably foreseeable misuse 8
2.3 User qualifications 8
2.4 Warning notices 8
2.4.1 Warning notices in the Operator’s Manual 8
2.4.2 Warning notices on the machine 9
2.5 Safety instructions 10
2.5.1 Operating and maintenance personnel 10
2.5.2 Protective work wear 11
2.5.3 Personal protective equipment 11
2.5.4 Preparing the machine for use 11
2.5.5 Coupling/uncoupling the machine to/from the tractor 11
2.5.6 Machine operation 11
2.5.7 Driving on public roads and lanes 11
2.5.8 Maintenance work 12
2.5.9 Working with hydraulics 12
2.5.10 Work in the vicinity of high-voltage power lines 12
2.5.11 Unauthorized modifications or alterations 12
2.5.12 What to do in an emergency 12
2.5.13 Fire prevention 12
3 Machine description 14
3.1 Product features 14
3.2 Machine positions 14
3.2.1 Transport position 14
3.2.2 Working position 14
3.2.3 Headland position 14
3.2.4 Parking position 14
3.3 Notices on the machine 14
3.4 Machine components 15
4 ISOBUS control system 16
2 TS 12545 PRO
4.1 Display layout 16
4.2 General buttons 17
4.3 Menus 18
4.3.1 Menu structure 18
4.3.2 “Main menu” 18
4.3.3 “Transport” menu 19
4.3.4 “Lifting/Lowering” menu 21
4.3.5 “Working Setup” menu 24
4.3.6 “On-Board Computer” menu 26
4.3.7 “User Setup” menu 27
4.3.8 “Manual Operation” menu 28
4.3.9 “Headland position” menu 30
4.3.10 “Calibrations” menu 31
4.3.11 “Diagnostics” menu 32
4.3.12 “Factory Settings” menu 33
4.4 Error messages 34
5 Technical data 36
5.1 Machine data 36
5.2 Tires 36
5.3 Noise information 37
5.4 Axle loads, gross weight and minimum ballast required 38
6 Initial start-up 39
6.1 Assembling the machine 39
6.2 Adjusting the transmission shaft 39
7 Using the machine 41
7.1 Attachment to the tractor 41
7.1.1 Start-up 41
7.1.2 Coupling the machine 41
7.1.3 Fitting the transmission shaft 42
7.1.4 Connect the hydraulics 42
7.1.5 Connect the lighting 43
7.1.6 Connecting the ISOBUS 44
7.1.7 Connect the air pressure brake 44
7.1.8 Releasing the parking brake 44
7.2 Road travel 44
7.3 Switching the machine to working position 45
7.4 Using the machine 46
7.4.1 Turning at the end of the field 47
7.5 Switching the machine to transport position 48
7.6 Machine storage 49
7.7 Settings 51
7.7.1 Adjusting the swath width 51
7.7.2 Set working width 51
7.7.3 Adjusting working height 52
Adjusting the height of the swath former
Adjusting the swath formation
Adjusting the lateral inclination
Adjusting the longitudinal inclination
7.7.8 Adjusting the sequential control
7.7.9 Setting the two-rotor operation mode
7. 7 .1 0 Setting individual rotor operation mode
8 Special equipment
9 Rectifying faults
9.1 After hitting an obstacle
9.2 Emergency operation
9.2.1 Lifting rotors into the transport position
9.2.2 Lowering rotors into working position
9.2.3 Lifting rotors into the headland position
9.2.4 Setting the working width in emergency operation
9.2.5 Setting the swath width in emergency operation
9.2.6 Setting the working height in emergency operation
10 Maintenance
10.1 Maintenance intervals
10.2 Cleaning
10.3 Tightening torques for nuts and bolts
10.4 Decals
10.5 Transmission shaft maintenance
10.6 Servicing the hydraulics
10. 7 Brake system maintenance
10. 7 .1 Checking the thickness of the brake pads
10.7.2 Tightening brake cylinders
10. 7 .3 Drain the water from the compressed air reservoir
10.8 Gearbox maintenance
10.8.1 Checking gearbox GT-30 oil level
10.8.2 Checking gearbox GT-40 oil level
10.8.3 Checking transfer gearbox oil level
10.9 Tire maintenance
10.9.1 Changing wheels
10.9.2 Tire pressure
10.10 Lubrication instructions
11 Decommissioning
11.1 Storage
11.2 Disposal

PLEASE NOTE:

• This is the SAME exact manual used by your dealers to fix your vehicle.
• The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
• Any queries / doubts regarding your purchase, please feel free to contact [email protected]

S.V