Doosan DB58 DB58S DB58T DB58TI & DB58TIS Excavator Diesel Engine Shop Manual – PDF DOWNLOAD
DESCRIPTION:
Doosan DB58 DB58S DB58T DB58TI & DB58TIS Excavator Diesel Engine Shop Manual – PDF DOWNLOAD
DB58,DB58S,DB58T
DB58TI & DB58TIS DIESEL
ENGINE
Shop Manual
65. 99897-8079
FOREWORD:
- This maintenance manual is designed to serve as a reference for DAEWOO Heavy Industries Ltd (here after DAEWOO’s) customers and distributors who wish to gain basic product knowledge on DAEWOO’s DB58, 0B58S1 DB58T1 DB58TI and DB58TIS Diesel engine.
- This economical and high performance diesel engine (6 cylinders1 4 strokes in-line direct injection type) has been so designed and manufactured to be used for the overland transport or industrial purpose.
- That meets all the requirements such as low noise, fuel economy) high engine speed, and durability. To maintain the engine in optimum condition and retain maximum performance for a long time, CORRECT OPERATION and PROPER MAINTENANCE are essential In this manual, the following symbols are used to indicate the type of service operations to be performed.
- During engine maintenance, please observe following instructions to prevent environmental damage; Take old oil to an old oil disposal point only. Ensure without fail that oil will not get into the sea or rivers and canals or the ground.
- Treat undiluted anticorrosion agents., antifreeze agents1 filter element and cartridges as special waste. • The regulations of the relevant local authorities are to be observed for the disposal. of spent coolants and special waste.
- If you have any question or recommendation in connection with this manual1 please do not hesitate to contact our head office, dealers or authorized service shops near by your location for any services. For the last, the content of this maintenance instruction may be changed without notice for some quality improvement. Thank you. DAEWOO
TABLE OF CONTENTS:
Doosan DB58 DB58S DB58T DB58TI & DB58TIS Excavator Diesel Engine Shop Manual – PDF DOWNLOAD
1. GENERAL INFORMATION
1.1 Engine specifications
1.2. Engine power
1.3. Performance curve
1.4. Engine assembly
1.5. Safety regulations
1.1 Engine specifications
1.2. Engine power
1.3. Performance curve
1.4. Engine assembly
1.5. Safety regulations
2. TECHNICAL INFORMATION
2.1. Engine model and serial number
2.2. Engine type
2.3, Engine timing
2.4. Valves
2.5. Lubrication system
2.6. A.ir cleaner
2.7. Fuel system
2.8. Cooling system
2.9. V-belt tension check and adjust
2.10. Valve clearance and adjustment
2.n. Cylinder compression pressure
2.12. Injection nozzle
2.13. Battery
2.14. Starting motor
2.15. Diagnosis and remedy
2.1. Engine model and serial number
2.2. Engine type
2.3, Engine timing
2.4. Valves
2.5. Lubrication system
2.6. A.ir cleaner
2.7. Fuel system
2.8. Cooling system
2.9. V-belt tension check and adjust
2.10. Valve clearance and adjustment
2.n. Cylinder compression pressure
2.12. Injection nozzle
2.13. Battery
2.14. Starting motor
2.15. Diagnosis and remedy
3. MAINTENANCE
3.1. Engine Disassembly
3.2. Engine Inspection
3.3. Reassembly
3.4. Electrical Equipments
3.1. Engine Disassembly
3.2. Engine Inspection
3.3. Reassembly
3.4. Electrical Equipments
4. Commissioning and Operation
4.1. Preparation
4.2. Starting and operation
4.3. Inspections after starting
4.4. Operation in winter time
4.5. Maintenance and care 4,6. Cooling system
4.7. Valve clearance and adjustment
4.8. Injection timing
4.9. Tightening the cylinder head bolts
4.10. Cylinder compression pressure
4.11. Injection nozzle
4.1. Preparation
4.2. Starting and operation
4.3. Inspections after starting
4.4. Operation in winter time
4.5. Maintenance and care 4,6. Cooling system
4.7. Valve clearance and adjustment
4.8. Injection timing
4.9. Tightening the cylinder head bolts
4.10. Cylinder compression pressure
4.11. Injection nozzle
4. 12. Fuel injection pump
4.13. Feed pump strainer
4, 14. Separator
4.15. Air bleeding
4.16. Belts
5. Maintenance of Major Components
5. 1. Lubrication system
5.2. Cooling system
5.3. Fuel system
5.4. Turbocharger
5.5. Air Intake System
6. Special Tool List
• Appendix e WORLDWIDE NETWORK
DB58/T /Tl/US
Operation and Maintenance :Manual
4.13. Feed pump strainer
4, 14. Separator
4.15. Air bleeding
4.16. Belts
5. Maintenance of Major Components
5. 1. Lubrication system
5.2. Cooling system
5.3. Fuel system
5.4. Turbocharger
5.5. Air Intake System
6. Special Tool List
• Appendix e WORLDWIDE NETWORK
DB58/T /Tl/US
Operation and Maintenance :Manual
VIDEO PREVIEW OF THE MANUAL:
IMAGES PREVIEW OF THE MANUAL:
PLEASE NOTE:
- This is the SAME exact manual used by your dealers to fix your vehicle.
- The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
- Any queries / doubts regarding your purchase, please feel free to contact [email protected]
R.D